Mechanic Job Vacancies in Visakhapatnam

Job SummaryThe Aircraft Maintenance Technician is responsible for inspecting, maintaining, troubleshooting, and repairing aircraft systems and components to ensure airworthiness, safety, and compliance with aviation regulations. The role requires strict adherence to maintenance procedures, safety standards, and accurate documentation. Key ResponsibilitiesPerform scheduled and unscheduled aircraft maintenance and inspectionsCarry out repair, replacement, and servicing of aircraft componentsTroubleshoot mechanical, electrical, and avionics issuesRead and interpret Aircraft Maintenance Manuals (AMM), IPC, SRMEnsure compliance with aviation safety standards and regulatory requirementsConduct pre-flight, transit, and post-flight checksUse appropriate tools, equipment, and diagnostic instrumentsMaintain accurate technical records and logbooksFollow SMS and Human Factors guidelinesCoordinate with engineers, supervisors, and quality teams Required Skills & CompetenciesStrong knowledge of aircraft systems (airframe, engine, avionics)Mechanical and technical troubleshooting skillsHigh level of attention to detailAbility to work under pressure and meet deadlinesGood communication and teamwork skillsFamiliarity with maintenance documentation systems (preferred) Education & QualificationAME / AMT course from an approved aviation instituteValid certification as per regulatory authority (where applicable)Type-rating on aircraft (preferred for experienced candidates)Freshers with strong technical fundamentals may apply Physical & Work RequirementsWillingness to work rotational shifts, nights, weekendsAbility to work in hangars, ramps, confined spacesPhysically fit to work at heights and outdoor conditions Safety & ComplianceStrict adherence to aviation safety regulationsProper use of PPE and safety equipmentImmediate reporting of safety hazards or defects

An Aircraft Maintenance Engineer (AME) is responsible for inspecting, maintaining, repairing, troubleshooting, and certifying aircraft to ensure they are safe, airworthy, and compliant with aviation regulations. The role involves carrying out scheduled and unscheduled maintenance on aircraft systems, engines, avionics, electrical components, hydraulic systems, landing gear, and structural components while adhering to the standards established by aviation authorities.Key ResponsibilitiesAircraft Inspection & MaintenancePerform routine, preventive, scheduled, and unscheduled aircraft maintenance.Conduct daily, transit, weekly, A-check, B-check, C-check, and heavy maintenance inspections.Inspect aircraft structures, fuselage, wings, landing gear, flight controls, and engines.Diagnose and rectify aircraft defects using approved maintenance procedures.Replace, repair, and overhaul defective aircraft components.Ensure all maintenance tasks are completed according to the Aircraft Maintenance Manual (AMM).Troubleshooting & RepairsIdentify mechanical, hydraulic, electrical, pneumatic, and avionics faults.Use specialized diagnostic tools and testing equipment.Repair aircraft systems while maintaining manufacturer specifications.Coordinate with engineering teams for complex technical issues.Perform functional tests after repairs to verify serviceability.Engine & Component MaintenanceInspect aircraft engines for wear, leaks, corrosion, and damage.Perform engine servicing, oil changes, filter replacement, and component inspections.Maintain propellers, Auxiliary Power Units (APU), and fuel systems.Monitor engine performance and recommend corrective actions.Avionics & Electrical SystemsInspect communication and navigation systems.Maintain radar, autopilot, cockpit instrumentation, and electrical wiring.Test aircraft electronic systems for operational reliability.Ensure compliance with avionics maintenance procedures.Documentation & ComplianceComplete maintenance logs, inspection reports, and defect records.Maintain aircraft technical documentation accurately.Ensure compliance with aviation regulatory authorities.Certify aircraft for return to service after maintenance (where appropriately licensed).Follow company maintenance policies and quality assurance procedures.Safety & Quality AssuranceFollow all aviation safety regulations and standard operating procedures.Maintain clean and organized work areas.Ensure proper use of Personal Protective Equipment (PPE).Report safety hazards and technical discrepancies immediately.Participate in safety audits and quality inspections.Team CoordinationWork closely with pilots, technicians, quality inspectors, and operations staff.Coordinate maintenance schedules with flight operations.Assist junior technicians with technical guidance and training.Participate in emergency aircraft recovery and AOG (Aircraft on Ground) support.Required QualificationsDiploma or Bachelor's Degree in Aircraft Maintenance Engineering, Aeronautical Engineering, Mechanical Engineering, or Aerospace Engineering.DGCA-approved AME qualification or equivalent aviation authority certification is preferred.Valid Aircraft Maintenance Engineer License (where applicable).Type rating on specific aircraft is an advantage.Relevant experience in aircraft maintenance is preferred.Required SkillsStrong knowledge of aircraft systems and maintenance procedures.Excellent troubleshooting and fault diagnosis skills.Knowledge of aviation regulations and airworthiness standards.Ability to interpret aircraft maintenance manuals and engineering drawings.Strong analytical and problem-solving abilities.Excellent attention to detail.Good communication and teamwork skills.Ability to work under pressure and meet strict deadlines.Computer proficiency in maintenance management software.Good technical documentation skills.Technical KnowledgeAircraft StructuresGas Turbine EnginesHydraulic SystemsPneumatic SystemsElectrical SystemsAvionics SystemsFlight Control SystemsLanding Gear SystemsFuel SystemsAircraft DocumentationMaintenance PlanningAircraft Safety StandardsPreferred CertificationsDGCA Aircraft Maintenance Engineer LicenseEASA Part-66 License (preferred internationally)ICAO-compliant aviation trainingHuman Factors TrainingSafety Management System (SMS) TrainingFuel Tank Safety TrainingEWIS (Electrical Wiring Interconnection System) TrainingAircraft Type Rating CertificationWorking ConditionsAirport hangars, maintenance bases, and line maintenance stations.Rotational shifts including nights, weekends, and public holidays.Outdoor work in varying weather conditions.Physically demanding work involving standing, climbing, bending, and lifting equipment.Exposure to aircraft noise, fuels, lubricants, and hydraulic fluids while following strict safety procedures.Salary Range (India)Fresher: 3.5 - 6 LPA2-5 Years: 6 - 10 LPA5-10 Years: 10 - 18 LPALicensed/Type-Rated AME: 15 - 30+ LPA (depending on airline, aircraft type, and experience)

We are urgently hiring Aircraft Maintenance Junior Engineers to support aircraft inspection, maintenance, troubleshooting, servicing, and repair activities at airports and aviation maintenance facilities. The selected candidates will work under authorized engineers and maintenance supervisors to ensure aircraft are maintained in accordance with approved maintenance procedures, safety standards, and regulatory requirements.Key ResponsibilitiesPerform routine and scheduled aircraft maintenance activities.Assist in inspection, servicing, troubleshooting, and repair of aircraft systems and components.Conduct visual inspections and identify defects, damage, leaks, or abnormal conditions.Assist licensed/certifying engineers during maintenance and rectification work.Carry out maintenance tasks according to approved Aircraft Maintenance Manuals (AMM), technical documentation, and company procedures.Assist with removal, installation, testing, and replacement of aircraft components.Perform basic troubleshooting of mechanical, electrical, hydraulic, pneumatic, and avionics systems as applicable.Maintain accurate maintenance records, work cards, inspection reports, and technical documentation.Ensure proper use and control of tools, ground support equipment, and maintenance equipment.Follow aircraft maintenance safety procedures and airport safety regulations.Ensure FOD prevention and maintain a clean and safe working environment.Report aircraft defects, technical issues, and unsafe conditions to the appropriate supervisor.Assist with aircraft turnaround and line maintenance activities when required.Support aircraft servicing activities, including relevant ground maintenance tasks.Follow company quality, safety, security, and compliance procedures.Participate in shift-based, night, weekend, and holiday duties as required.Coordinate with maintenance engineers, supervisors, operations, and other airport teams.Maintain confidentiality and proper handling of aircraft technical information.For Junior EngineersAssist senior/authorized engineers in aircraft maintenance and inspection.Review technical manuals and maintenance instructions before performing assigned tasks.Support troubleshooting and fault isolation activities.Assist in technical documentation and maintenance record preparation.Monitor maintenance activities for compliance with approved procedures.Develop practical knowledge of aircraft systems, maintenance practices, and aviation regulations.For Aircraft Maintenance TechniciansPerform assigned mechanical/electrical maintenance tasks under appropriate supervision.Inspect aircraft structures, components, and systems for defects.Remove and install aircraft components as authorized.Use maintenance tools and test equipment correctly.Assist with servicing, repair, inspection, and functional testing.Maintain tools and equipment in serviceable condition.Follow maintenance instructions and safety procedures at all times.Required QualificationsJunior Engineer:Diploma / Bachelor's degree in Aircraft Maintenance Engineering, Aeronautical Engineering, Aerospace Engineering, Mechanical Engineering, Avionics, or a related field, depending on the employer's requirements.Relevant AME training/licensing or regulatory eligibility may be required for specific positions.Technician:ITI / Diploma / relevant technical qualification in Aircraft Maintenance, Aviation, Mechanical, Electrical, Electronics, or related discipline.Aircraft maintenance training or relevant aviation experience is an advantage.Preferred SkillsKnowledge of aircraft maintenance procedures and safety practices.Basic understanding of aircraft systems and components.Ability to read and understand technical manuals and maintenance documentation.Good troubleshooting and problem-solving skills.Strong attention to detail.Good mechanical/electrical aptitude.Ability to work effectively in a team.Good communication and reporting skills.Ability to work under time-sensitive airport operations.Willingness to work in shifts, including nights, weekends, and holidays.Strong commitment to aviation safety and quality standards.ExperienceFreshers: May be considered for trainee/junior positions subject to qualification and employer requirements.Experienced: Candidates with aircraft maintenance, MRO, airline, airport, line maintenance, or base maintenance experience may be preferred for experienced positions.Working ConditionsWork may be performed on aircraft stands, hangars, maintenance facilities, and airport operational areas.Candidates should be comfortable working outdoors and around aircraft and ground-support equipment.Shift duties may include early mornings, nights, weekends, and public holidays.The role may require standing, walking, climbing aircraft access equipment, and handling maintenance tools/equipment.Key CompetenciesTechnical Knowledge Aircraft Maintenance Troubleshooting Safety Awareness Quality Control Teamwork Attention to Detail Technical Documentation Problem Solving Time ManagementSalary & BenefitsSalary: As per company standards and candidate's qualification/experienceShift allowance may be applicable.Overtime and other benefits may be provided according to company policy.Training and career-development opportunities may be available.Statutory benefits may apply based on employer policy and applicable regulations.

As an Aircraft Maintenance Engineer, you will play a crucial role in ensuring the safety and efficiency of aircraft. Your primary responsibilities will include:- Conducting Inspections: Regularly check aircraft to ensure they are in proper working condition. This involves identifying any mechanical issues and verifying compliance with safety regulations.- Performing Repairs: Fix any faults discovered during inspections or reported by the flight crew. This can include everything from minor adjustments to major repairs on engines or electrical systems.- Maintaining Records: Keep detailed records of all maintenance work done on aircraft. Accurate documentation is essential for safety audits and regulatory compliance.- Collaborating with Team Members: Work closely with other engineers and technicians to handle repairs and maintenance effectively. Good communication is vital for a cohesive working environment.- Staying Updated on Technology: Keep up with the latest in aviation technology and maintenance practices. Continuous learning ensures you are equipped to handle new aircraft systems and technologies.To be successful in this role, you should have strong technical skills and a good understanding of aircraft systems. Attention to detail is crucial, as even minor oversights can lead to significant safety risks. Good problem-solving skills will help you tackle complex maintenance issues effectively. You should also demonstrate a commitment to safety and adhere strictly to regulatory standards. Open communication and teamwork abilities are essential to work effectively in a collaborative environment.

As an Aircraft Maintenance Engineer, you will play a crucial role in ensuring the safety and efficiency of our aircraft. Your primary responsibilities will include:- Conduct Regular Inspections: You will perform routine checks on aircraft systems and components to ensure they are functioning correctly and meet safety standards.- Repair and Replace Parts: You will identify faulty components and carry out repairs or replacements as necessary to maintain aircraft performance.- Maintain Maintenance Records: Keeping accurate logs of all maintenance work done is essential for compliance and safety audits.- Collaborate with Other Engineers: Working closely with a team of engineers, you will share knowledge and insights to enhance overall maintenance effectiveness.- Follow Safety Protocols: It is crucial to adhere to safety guidelines and regulations to prevent accidents and ensure a safe working environment.To succeed in this role, you should possess the following skills and expectations:- Technical Knowledge: A strong understanding of aircraft systems and maintenance procedures is vital for troubleshooting and repairs.- Attention to Detail: Precision is crucial in aircraft maintenance, so you should be meticulous in all aspects of your work.- Problem-Solving Skills: You should be able to quickly identify issues and develop efficient solutions.- Communication Skills: Clear communication is important for collaborating with team members and documenting maintenance procedures.- Team Player: You should be able to work well with others while also being able to take initiative when needed.

As an Aircraft Maintenance Engineer based in Visakhapatnam, your primary role will be ensuring the safety and efficiency of aircraft systems through thorough inspection and maintenance. You will be responsible for performing various tasks related to the upkeep of aircraft, requiring both technical skills and attention to detail. Key Responsibilities:- Perform Inspections: Carry out regular inspections of aircraft systems and components to ensure they meet safety standards and regulations. This includes checking engines, landing gear, and navigation systems.- Conduct Repairs: Diagnose and repair issues found during inspections or reported by flight crews. This involves hands-on work and may require specialized tools and equipment.- Maintain Records: Document all maintenance and repair work accurately in compliance with regulations. Keeping thorough records is crucial to track the aircraft's history and any ongoing issues.- Collaborate with Team: Work closely with other engineers and technicians to ensure effective communication and coordination during repair and maintenance work. Teamwork is essential for maintaining efficiency and safety.- Stay Updated: Keep abreast of the latest aviation technology and safety regulations. Continuous learning is vital in this field due to rapid advancements.Required Skills and Expectations:- A strong understanding of aircraft systems and maintenance procedures is essential, even for entry-level candidates.- Good problem-solving skills will help you diagnose issues effectively.- You should be detail-oriented and able to maintain accurate records.- Effective communication skills are important for team collaboration and reporting.- Familiarity with the latest aviation regulations and safety standards is a plus, but ongoing training will be provided.

We are looking for a dedicated Aircraft Maintenance Technician to join our team in Visakhapatnam. In this role, you will be responsible for ensuring the safety and functionality of aircraft. This is a full-time position suitable for candidates with 0 to 6 years of experience and a minimum education of 12th pass.Key Responsibilities:- Conduct Inspections: Regularly check aircraft systems, engines, and components to ensure they meet safety standards and regulations.- Perform Repairs: Identify and fix mechanical issues, replacing defective parts to maintain optimal performance.- Maintain Records: Document all maintenance activities accurately to comply with regulatory standards and help with future inspections.- Collaborate with Team: Work closely with other technicians and engineers to assess aircraft performance and establish maintenance schedules.- Follow Safety Protocols: Adhere to safety guidelines to prevent accidents and ensure a safe working environment for all personnel.Required Skills and Expectations:- Candidates must have at least a 12th-grade education; technical courses related to aircraft maintenance are a plus.- Strong mechanical aptitude is essential, along with problem-solving skills to address maintenance challenges effectively.- Attention to detail is crucial for inspecting aircraft and keeping accurate records.- Good communication skills are needed for teamwork and reporting directly to supervisors.- A commitment to safety and adherence to aviation regulations is expected at all times. This position offers a unique opportunity to develop your skills in the aviation industry while contributing to the safety and reliability of aircraft operations.