Maintenance Engineer Fresher Jobs in Ahmedabad

An Aircraft Technician is responsible for inspecting, maintaining, repairing, and testing aircraft systems and components to ensure safe and efficient aircraft operations. The technician works on mechanical, electrical, hydraulic, pneumatic, and avionics systems according to aviation safety standards and regulatory requirements.Aircraft Technicians perform scheduled maintenance, troubleshoot technical faults, replace defective parts, and certify aircraft readiness for flight under the supervision of licensed engineers when required.Key ResponsibilitiesAircraft Inspection & MaintenancePerform routine and scheduled aircraft maintenance checks.Inspect aircraft structures, engines, landing gear, and control systems.Conduct pre-flight, transit, daily, weekly, and periodic inspections.Identify defects, malfunctions, and mechanical issues.Repair & TroubleshootingDiagnose technical and mechanical faults in aircraft systems.Repair or replace damaged aircraft components and parts.Troubleshoot hydraulic, pneumatic, fuel, electrical, and engine systems.Use specialized testing and diagnostic equipment.Component InstallationInstall aircraft parts, instruments, wiring, and assemblies.Remove and replace aircraft engines or system components when required.Ensure all installations comply with aviation safety standards.Documentation & ReportingMaintain accurate maintenance logs and technical records.Complete inspection reports and work orders.Record all repairs, replacements, and maintenance activities.Ensure compliance with aviation authority regulations.Safety ComplianceFollow aviation safety procedures and maintenance manuals.Adhere to company policies and international aviation regulations.Ensure tools and equipment are properly calibrated and maintained.Maintain a clean and safe working environment.Team CoordinationWork closely with Aircraft Maintenance Engineers, pilots, and ground staff.Coordinate with technical supervisors and quality assurance teams.Assist during aircraft turnaround operations.Types of Aircraft Systems HandledAircraft EnginesHydraulic SystemsElectrical SystemsFuel SystemsBrake SystemsPneumatic SystemsLanding GearFlight Control SystemsCabin SystemsAvionics EquipmentRequired SkillsStrong mechanical and technical knowledgeTroubleshooting and problem-solving abilityKnowledge of aircraft systems and maintenance proceduresAbility to read technical manuals and engineering drawingsAttention to detail and accuracyGood communication and teamwork skillsTime management and multitasking abilitiesSafety awareness and compliance knowledgeEducational QualificationsDiploma or Degree in Aircraft Maintenance Engineering, Aeronautical Engineering, or Aerospace EngineeringAME (Aircraft Maintenance Engineering) certification preferredDGCA/FAA/EASA-approved training is an advantageTechnical vocational training in aviation maintenance may also be acceptedExperience RequirementsFresherBasic knowledge of aircraft maintenance proceduresInternship or training experience preferredExperienced Technician1-5+ years of aircraft maintenance experienceExperience on commercial or private aircraftFamiliarity with aviation maintenance software and toolsCertifications PreferredDGCA AME LicenseFAA A&P LicenseEASA Part-66 LicenseHuman Factors & Safety TrainingFuel Tank Safety CertificationAviation Safety Management TrainingWorking EnvironmentAirportsAircraft hangarsMaintenance workshopsAviation maintenance organizations (MRO)Airlines and private aviation companiesAircraft Technicians may work:Rotational shiftsNight shiftsWeekends and holidaysIn noisy and physically demanding environmentsPhysical RequirementsAbility to stand for long hoursClimb ladders and work at heightsLift heavy aircraft parts and toolsWork in confined spacesGood hand-eye coordination and physical fitnessSalary Range (Approx.)IndiaFresher: 20,000 - 35,000 per monthExperienced: 40,000 - 1,20,000+ per month

We are seeking a male Civil Site Engineer with 0-4 years of experience to join our team in Ahmedabad, India. The successful candidate will be responsible for overseeing civil construction projects from start to finish, ensuring that they meet quality standards, safety regulations, and project timelines.Key Responsibilities:1. Supervise construction activities on-site to ensure compliance with design specifications and safety standards.2. Coordinate with architects, contractors, and subcontractors to ensure proper execution of the project.3. Prepare and review project schedules, budgets, and progress reports.4. Inspect construction sites regularly to identify potential issues and propose solutions.5. Manage project documentation and ensure all necessary permits and approvals are in place.Required Skills and Expectations:- Graduate in Civil Engineering or related field.- Strong knowledge of construction practices, materials, and methods.- Proficiency in AutoCAD, MS Office, and project management software.- Excellent communication and interpersonal skills.- Ability to work independently and as part of a team.- Willingness to work from the office and travel to project sites as needed.

Providing Technical Expertise to customers including working with end customers/ New Engineers to Install , maintain ,training and repair products with in the specified SLA

Key Responsibilities:1. Conducting research and analysis: Chemical engineers are responsible for researching new technologies, techniques, and processes to improve production efficiency and product quality.2. Designing and implementing processes: They design chemical processes and equipment, oversee the installation and operation of these systems, and ensure compliance with safety and environmental regulations.3. Troubleshooting and problem-solving: Chemical engineers identify and resolve issues related to process efficiency, product quality, and safety, using their analytical and troubleshooting skills.4. Managing projects: They oversee project timelines, budgets, and resources to ensure successful completion of projects within specified parameters.5. Collaborating with cross-functional teams: Chemical engineers work closely with other departments such as production, quality control, and research and development to achieve common goals.Required Skills and Expectations:1. Strong organizational skills to manage multiple projects and deadlines effectively.2. Mechanical maintenance knowledge to ensure the proper functioning of equipment and processes.3. Excellent communication skills to interact with team members, suppliers, and clients effectively.4. Management skills to oversee projects, teams, and resources efficiently.5. Troubleshooting skills to identify and resolve issues in chemical processes and equipment.6. Effective communication skills to convey complex technical information clearly to diverse audiences.

Job SummaryThe Avionics Engineer is responsible for the design, development, testing, installation, and maintenance of aircraft electronic systems. This role ensures safe, efficient, and compliant operation of avionics equipment including communication, navigation, surveillance, and flight control systems. The engineer works closely with cross-functional teams to support system integration, troubleshooting, upgrades, and continuous improvement in aviation technology. Key ResponsibilitiesDesign & Development:Design, develop, and integrate avionics systems for aircraft and aerospace applications.Create system schematics, wiring diagrams, and interface control documents.Develop embedded software or hardware for avionics components.Testing & Troubleshooting:Conduct system testing, validation, calibration, and verification to ensure performance standards.Diagnose issues in avionics equipment using testing tools and propose corrective actions.Perform root cause analysis for system failures and implement preventive measures.Installation & Integration:Oversee installation and configuration of avionics systems in aircraft.Ensure seamless integration of avionics with electrical, mechanical, and flight control systems.Coordinate with manufacturing, maintenance, and flight operations teams for system implementation.Compliance & Documentation:Ensure compliance with aviation authorities (FAA, EASA, DGCA) and safety standards.Prepare technical reports, maintenance manuals, and certification documentation.Maintain accurate documentation of design changes, test results, and system configuration.Maintenance & Support:Support maintenance teams in periodic inspections, upgrades, repairs, and system checks.Provide engineering support for aircraft modifications, retrofits, and new product introductions. Required Skills & CompetenciesTechnical Skills:Strong knowledge of communication, navigation, surveillance, autopilot, and flight control systems.Expertise in embedded systems, digital/analog electronics, and circuit design.Hands-on experience with avionics protocols (e.g., ARINC 429, MIL-STD-1553, CAN bus).Proficiency in tools such as MATLAB/Simulink, LabVIEW, PSPICE, Altium, Xilinx, or similar.Knowledge of aviation standards DO-178C, DO-254, RTCA, FAA/EASA guidelines.Soft Skills:Analytical and problem-solving ability with strong attention to detail.Effective communication, teamwork, documentation, and time-management skills.Ability to work under pressure and meet strict deadlines. Education & Experience RequirementsBachelors degree in Avionics Engineering, Aerospace Engineering, Electronics & Communication, Electrical Engineering, or related field.(Preferred) Masters degree in Avionics or related specialization.Experience:Entry Level: 02 yearsMid-Level: 37 yearsSenior: 8+ years in avionics engineering or related aerospace domain Work EnvironmentMay require working in aircraft hangars, manufacturing facilities, laboratories, or test sites.Willingness to travel for project support, testing, and system installation.Must adhere to aviation safety regulations and workplace safety protocols. Job Type & CompensationFull-time / PermanentCompetitive salary based on experience and qualificationsBenefits: Health insurance, travel allowance, training & professional development

Job Summary:The Civil Engineer Aviation Projects is responsible for planning, designing, and supervising the construction and maintenance of airport infrastructure such as runways, taxiways, aprons, terminal buildings, and support facilities. This role ensures that all civil engineering works comply with national and international aviation standards, environmental regulations, and safety requirements. The engineer works closely with multidisciplinary teams to deliver high-quality, cost-effective, and sustainable airport infrastructure projects.Key Responsibilities: 1. Airport Design & PlanningParticipate in the design, layout, and development of airside (runways, taxiways, aprons) and landside (roads, terminals, parking) infrastructure.Prepare engineering drawings, design reports, and technical specifications.Conduct feasibility studies and assist in the preparation of airport master plans.Ensure design compliance with ICAO Annex 14, FAA, and DGCA standards. 2. Construction Supervision & Site ManagementOversee the execution of civil works at airport construction sites.Supervise contractors, monitor progress, and ensure adherence to quality, safety, and schedule targets.Conduct inspections and verify materials, workmanship, and testing procedures.Manage and resolve site-level issues, variations, and technical queries.Maintain as-built documentation and project progress reports. 3. Pavement Design & MaintenanceDesign flexible and rigid pavements for runways and taxiways using FAARFIELD, COMFAA, or equivalent tools.Analyze aircraft load data and subgrade conditions for pavement design optimization.Develop pavement maintenance and rehabilitation plans based on performance evaluations. 4. Drainage, Utilities & Environmental ComplianceDesign stormwater drainage systems, culverts, and airfield grading layouts.Coordinate with MEP teams for utility planning (water, power, sewer, communication).Ensure compliance with environmental and sustainability regulations (EIA, noise, and waste management). 5. Coordination & DocumentationCollaborate with architects, structural, electrical, and mechanical engineers to ensure design integration.Prepare project documentation, including BOQs, cost estimates, and tender specifications.Liaise with clients, consultants, and aviation authorities for approvals and inspections.Support project management teams with reports, presentations, and technical data.Qualifications and Requirements:Bachelors degree in Civil Engineering (Masters in Transportation, Structural, or Airport Engineering preferred).06 years of relevant experience in aviation or infrastructure development projects.Proficiency in engineering software such as:AutoCAD Civil 3D, Revit, STAAD.Pro, MS Project, Primavera, FAARFIELD, PCASE, or COMFAA.Sound knowledge of ICAO, FAA, DGCA, BIS, and IRC codes and standards.Strong analytical, problem-solving, and project management skills.Excellent communication and coordination abilities.Ability to work under pressure and within high-security airport environments.Key Skills:Airport design and planningPavement and drainage designProject execution and site supervisionQuantity estimation and cost controlAutoCAD Civil 3D and engineering software proficiencyTeam leadership and coordinationSafety and regulatory complianceReport writing and documentationBehavioral Attributes:Detail-oriented and safety-consciousStrong leadership and teamwork abilitiesProfessional ethics and integrityAdaptability to dynamic project environmentsTime management and accountabilityPerformance Indicators:Timely delivery of project milestonesCompliance with design standards and safety normsQuality of engineering documentation and reportingCost efficiency and adherence to project budgetsClient and stakeholder satisfaction

We have vacant of 47 Jobs for Aeronautical Engineer at Aviation Industry Jobs in Mumbai, Visakhapatnam, Trivandrum/Thiruvananthapuram, Chennai, Vijayawada, Tiruchirappalli/Trichy, Ahmedabad, Imphal, Pune, Jammu, for Freshers Educational Qualification : I.T.I., B.E, B.Tech, Other Bachelor Degree, Post Graduate Diploma, M.Tech, Any Master Degree Skill Aeronautical Engineer, Aeronautical Analyst, Aeronautical, Aircraft Maintenance, Aircraft Maintenance Engineer, Aircraft Engineer, Electrical Engineer, Site Engineer, Mechanical Engineer, Aerospace Engineering, Aircraft Technician, Aircraft Mechanic etc.

We are looking for 2 Sales Posts in Ahmedabad, with deep knowledge in Utility Maintenance,Technical Services,Customer Management,Preventive Maintenance,Field Service,Communication Skills and Required Educational Qualification is : Diploma, B.E Clear air products, HVAC product , filtration applications in various industry

COMPNAY IS LOOKING FOR BE/BTECH MECHANICAL FRESHERS OR DIPLOMA IN MECHANICAL WITH SOME EXPERIENCES FOR FIELD ENGINEERS WHO CAN DO EQUIPMENT TESTING JOB IN AHMEDABAD AND SURROUNDING AREA.VEHICLE AND LICENSE IS MUST

- Key Responsibilities:1. Organize and oversee mechanical maintenance tasks: As a mechanical engineer, you will be responsible for planning, scheduling, and supervising mechanical maintenance activities to ensure equipment and machinery are functioning efficiently.2. Communicate effectively with team members: You will need to maintain open lines of communication with colleagues to ensure projects are completed on time and within budget.3. Manage projects: You will be expected to lead and coordinate mechanical engineering projects, including budgeting, scheduling, and resource allocation.4. Troubleshoot mechanical issues: You will need to identify and resolve mechanical problems as they arise to prevent costly downtime and ensure production remains on track.- Required Skills and Expectations:1. Strong organizational skills: You should be able to prioritize tasks, manage time effectively, and coordinate multiple projects simultaneously.2. Proficient in mechanical maintenance: A solid understanding of mechanical systems and machinery is essential for this role.3. Good communication skills: Clear and effective communication is crucial for collaborating with team members and conveying technical information.4. Management skills: The ability to lead a team, allocate resources, and make sound decisions is necessary for managing projects successfully.5. Troubleshooting skills: You should possess a keen eye for identifying mechanical problems and the ability to develop solutions quickly and efficiently.

Aircraft Engineer Responsibilities:1. Design and develop aircraft components and systems using CAD software2. Conduct aircraft maintenance and repair tasks to ensure safe and efficient operation3. Perform engineering calculations and analysis to troubleshoot and resolve issues4. Collaborate with avionics technicians to integrate electrical and electronic systems5. Manage engineering tasks within project timelines and budget constraints6. Inspect and test aircraft systems to ensure compliance with regulatory standards

As an Aircraft Maintenance Engineer, your responsibilities will include conducting avionics and structural repairs, performing engine overhauls, troubleshooting aircraft systems, and ensuring the safe and efficient operation of aircraft. You will need to have strong technical ability, safety awareness, and excellent communication skills. Key skills required for this position include analytical thinking, problem-solving abilities, and proficiency with diagnostic equipment. You must also have a thorough understanding of aircraft systems and be able to effectively repair and maintain them.

Responsibilities:1. Providing technical advice regarding design, construction, or program modifications and structural repairs.2. Managing and overseeing construction projects from start to finish.3. Ensuring that projects are completed within budget and on time.4. Conducting regular site visits to monitor progress and quality of work.5. Collaborating with architects and other professionals to ensure that projects meet specifications.6. Ensuring compliance with safety regulations and quality standards.