Equipment Maintenance Jobs

ASSISTANT TECHNICIAN - LOKHRA, GUWAHATIAn assistant technician of 1-3 years experience with knowledge of WTP, RO, and water filtration systems. Responsible for assisting in installation, operation, maintenance, troubleshooting, and servicing of water treatment equipment. Basic technical knowledge and problem-solving skills required.

ONLY INDIAN & PAKISTANI CANDIDATES APPLYVALID GCC LICENSE MUSTOperate excavators safely and efficiently for excavation and construction activities.Perform digging, trenching, loading, leveling, and earth-moving operations as required.Handle the excavator according to site conditions and project requirements.Carry out daily checks of the excavator before starting work.Monitor fuel, hydraulic systems, tracks, and other equipment components.Follow instructions from site supervisors and project engineers.Maintain safe working distances from workers, vehicles, and other equipment.Ensure proper positioning and safe operation of the machine.

As a Laboratory Technologist, you will play a vital role in supporting experimental research and ensuring accurate laboratory results. Your responsibilities will include:- Conducting Experiments: Perform various laboratory tests and experiments according to established protocols to gather data and results.- Data Analysis and Reporting: Analyze test results and document findings in clear reports, ensuring compliance with regulatory standards.- Equipment Maintenance: Regularly check and maintain laboratory instruments and equipment, ensuring they are functioning properly and safely.- Sample Preparation: Prepare samples for analysis by following precise procedures, ensuring accuracy and reliability of results.- Safety Compliance: Adhere to safety guidelines and protocols to maintain a safe working environment for yourself and your colleagues.- Collaboration: Work closely with other laboratory personnel and researchers to contribute to ongoing projects and share findings.To succeed in this role, you will need:- A Bachelor of Science (B.Sc) degree, preferably in a relevant scientific discipline.- 1 to 7 years of experience working in a laboratory environment, demonstrating practical knowledge and skills.- Strong attention to detail to ensure accurate results and compliance with protocols.- Good communication skills to effectively convey findings and collaborate with the team.- Familiarity with laboratory equipment and techniques, ensuring you can perform tasks independently and efficiently.- Problem-solving abilities to troubleshoot any issues that may arise during experiments or data analysis.

DESCRIPTIONAs a Trainee Roustabout, you will begin your career in the oil and gas industry, working in various support roles on drilling rigs or offshore platforms. You will learn essential skills and be part of a dedicated team.Key Responsibilities:- Assist in Rig Operations: You will help with basic rig tasks, such as moving equipment and materials. This support is crucial for maintaining safety and efficiency on the site.- Equipment Maintenance: You will be taught how to clean and maintain tools and machinery. Proper maintenance ensures that everything operates smoothly and safely.- Follow Safety Protocols: Adhering to safety procedures is crucial. You will learn to recognize hazards and follow guidelines to ensure the safety of yourself and your team.- Support Crew Members: You will assist skilled workers in their tasks, gaining hands-on experience. This teamwork is essential for completing tasks efficiently.- Participate in Training Programs: You will take part in training sessions to build your knowledge and skills. Continuous learning is important for your development in this role.Required Skills and Expectations:- A minimum of a 12th-grade education is needed, along with a willingness to learn.- Physical fitness is important as the job may require lifting heavy objects and working in various weather conditions.- Good teamwork and communication skills are vital, as you will work closely with others.- A proactive attitude and eagerness to learn will help you succeed in this role.

We are looking for a skilled Fitter Turner to join our team in Viman Nagar, Pune. The ideal candidate will have 1 to 5 years of experience in fitting and turning operations and hold an I.T.I. certification. Key Responsibilities:1. Machine Operation: You will operate lathes, milling machines, and other equipment to manufacture precision components. This involves setting up and adjusting machines for optimal performance.3. Quality Control: You will inspect finished products and components for accuracy and quality, ensuring they meet specifications. Attention to detail is essential in maintaining high standards.4. Maintenance: You will perform preventative maintenance on machines and tools to ensure they remain in good working condition. Regular checks can prevent downtime and enhance productivity.5. Collaboration: You will work closely with other team members to ensure project goals are met. Effective communication and teamwork are vital for success in this role.Required Skills and Expectations:- You should have good technical knowledge of machining processes and basic engineering principles. - Proficiency in using measuring tools like calipers and micrometers is essential.- Strong attention to detail and problem-solving skills are expected.- Ability to work efficiently in a full-time office setting is essential, and candidates should be comfortable in a workshop environment. - Male candidates are preferred for this role.

We are looking for a dedicated Loading Supervisor to manage loading operations in Shillong, India. This role is best suited for individuals with a willingness to learn and grow in a dynamic environment. Candidates should have completed their 12th grade and be ready to take on responsibilities in a full-time office setting.Key Responsibilities:- Oversee Loading Operations: Supervise the loading of goods onto trucks or containers, ensuring that proper procedures are followed to meet safety and efficiency standards.- Coordination with Team Members: Work closely with loaders and other staff, providing guidance to ensure tasks are completed accurately and on time.- Quality Control: Check the quality and quantity of loaded items, addressing any discrepancies or issues before departure to maintain service reliability.- Record Keeping: Maintain accurate records of loaded items and any relevant paperwork to facilitate smooth operations and reporting.Required Skills and Expectations:Candidates should have good communication skills and the ability to work well in a team. Attention to detail is crucial to ensure safe loading. Basic computer literacy is preferred for maintaining records. A positive attitude and willingness to learn will help you succeed in this role. Prior experience is not required; however, a proactive approach to learning and a strong work ethic are highly valued.

We are seeking a skilled Fabrication Engineer with 4 to 6 years of experience to join our team in Jhajjar, India. The ideal candidate will be responsible for designing and overseeing the manufacturing process of various components.Key Responsibilities:1. Design and Development: Create detailed fabrication drawings and models using CAD software to ensure accuracy and functionality in prototype and production stages.2. Process Optimization: Analyze and improve fabrication processes for efficiency, quality, and cost-effectiveness by identifying areas for improvement in existing procedures.3. Material Selection: Recommend appropriate materials for fabrication projects, considering factors such as strength, durability, and cost, to ensure the final product meets specifications.4. Quality Control: Oversee inspection processes during manufacturing to ensure that all components meet safety standards and quality specifications, making adjustments as necessary.5. Collaboration: Work closely with cross-functional teams including design, production, and quality assurance to ensure that all projects are completed on time and within budget.Required Skills and Expectations:Candidates must hold a relevant engineering degree and possess strong knowledge of fabrication techniques and materials. Proficiency in CAD software is essential, along with strong analytical and problem-solving skills. Good communication and teamwork abilities are crucial, as you will collaborate with various departments to achieve project goals. Attention to detail and a commitment to producing high-quality work are expected.

EXPERIENCE IN CONSTRUCTION EQUIPMENT SERVICE MAINTENANCE KNOWLEDGE - We are seeking an experienced Service Manager to lead our service operations in Pune, India. The ideal candidate will have 10 to 15 years of experience and will excel in managing customer service teams while ensuring high-quality service delivery.Key Responsibilities:1. Team Leadership: Manage and motivate a team of service professionals, setting clear goals and performance expectations to drive team success.2. Customer Engagement: Build strong relationships with clients, understanding their needs and ensuring satisfaction through efficient service delivery.3. Service Improvement: Analyze service processes and identify opportunities for improvement to enhance customer experience and operational efficiency.4. Performance Monitoring: Track key performance indicators (KPIs) to assess the effectiveness of service operations and implement corrective actions as necessary.5. Training and Development: Conduct regular training sessions for team members to improve their skills and knowledge in service delivery best practices.6. Coordination with Other Departments: Work closely with other departments to ensure seamless service provision and to resolve any issues that impact customer satisfaction.Required Skills and Expectations:The ideal candidate must hold a graduate degree and possess strong leadership and communication skills. A deep understanding of service management principles and the ability to analyze and solve problems effectively are essential. The candidate should also demonstrate the ability to foster a positive team environment. A results-oriented mindset with a commitment to delivering excellent customer service is crucial for this role.

Job Title : Pacaking Machine OperatorExperience : 2 yearsLocation : PondicherryResponsibilities:Operate and monitor the cup sleeving machine for smooth production.Check and adjust applicator, cutting blade and sensors when required.Ensure proper cup quality and maintain production standards.Record production/process details as per QMS requirements.Work in day or night shifts.Requirements:ITI / DME / Graduate.3-4 years of experience in a similar role.Good machine-handling and troubleshooting skills.Able to work independently in a production environment.

ONLY INDIAN & PAKISTANI CANDIDATES APPLYConstruct, assemble and install shuttering/formwork for RCC structures.Prepare formwork for columns, beams, slabs, walls, foundations and staircases.Measure, mark and cut plywood, timber and other shuttering materials.Read and understand basic structural and formwork drawings.Ensure proper alignment, level, dimensions, plumb and stability before concreting.Install props, supports, braces, clamps and other formwork components.Apply shuttering oil/release agent where required.Check formwork for gaps and make necessary corrections before concrete pouring.Assist during concreting and immediately rectify any movement or displacement of shuttering.

ONLY INDIAN CANDIDATES APPLYSupervise scaffolding erection, modification, inspection, maintenance, and dismantling.Allocate scaffolders, manpower, tools, and equipment according to daily work requirements.Ensure scaffolding work is carried out according to approved drawings, method statements, and project specifications.Conduct daily toolbox talks and safety briefings.Inspect scaffolding structures for stability, access, proper installation, and safety.Ensure compliance with company HSE procedures and international scaffolding standards.Monitor scaffolding materials and prevent damage, loss, or improper use.Maintain records of inspections, permits, handovers, and daily work progress.Identify unsafe conditions and take immediate corrective action.

ONLY INDIAN CANDIDATES APPLYInstall and commission commercial coffee and espresso machines.Inspect, service, maintain, and repair coffee equipment.Diagnose electrical, mechanical, hydraulic, and electronic faults.Perform preventive maintenance and regular equipment inspections.Troubleshoot espresso machines, coffee grinders, and other caf equipment.Calibrate machine settings and ensure proper performance.Replace faulty components, electrical parts, pumps, valves, and other spare parts.Clean and maintain internal and external machine components.Attend customer breakdown/service calls and provide technical support.Conduct machine testing after repairs and ensure proper operation.Maintain service reports and records of completed maintenance work.Follow company safety, hygiene, and technical procedures.

Installs and service/repairs Medical Imaging equipment. Consults with customer orsupervisor to plan layout of equipment during each new installation. Studies blueprints, schematics, manuals, and other specifications to determine installationprocedures. Able to interpret schematics and wiring diagrams to repair equipment. Hands-on technicalskills and using standard test instruments and hand tools. Installs or oversees installation of equipment according to manufacturer's specifications. Provide basic user training for equipment installed. Advice management regarding customer satisfaction, product performance, suggestions forproduct improvements

1. Design and develop mechanical systems, equipment, and machinery required for refinery operations, including pumps, compressors, heat exchangers, pressure vessels, and boilers.2. Develop and implement preventive maintenance programs for critical mechanical equipment, including pumps, valves, and rotating machinery.3. Diagnose and troubleshoot mechanical failures or malfunctions, leading to effective corrective actions to minimize downtime.4. Conduct regular performance evaluations and assessments of mechanical systems to identify areas for improvement, increase efficiency, and reduce energy consumption.5. Oversee the installation, commissioning, and startup of new mechanical systems, ensuring compliance with project timelines, cost estimates, and quality standards.6. Conduct regular safety audits and inspections to verify that all mechanical systems meet safety standards and do not pose a risk to personnel or the environment.7. Perform condition monitoring and vibration analysis on rotating equipment to predict failure and improve reliability.8. Maintain accurate and up-to-date maintenance logs and operation manuals for mechanical systems and equipment.9. Evaluate and select vendors and suppliers for mechanical equipment, ensuring they meet quality, cost, and delivery requirements.10. Coordinate with vendors for equipment procurement, installation, and commissioning.11. Provide technical support and guidance to the operations team during the start-up, shutdown, and day-to-day running of mechanical systems.12. Lead lean manufacturing and continuous improvement initiatives to enhance the performance of mechanical systems and reduce operational costs.13. Prepare and manage budgets for mechanical engineering projects and maintenance activities, ensuring cost-effective solutions are implemented.

1. Perform routine and specialized tests on bitumen and bitumen-based products to ensure they meet the required quality standards and specifications.2. Use laboratory equipment such as viscometers, softening point testers, and penetration testers to analyze the physical properties of bitumen.3. Conduct tests on various types of bitumen such as penetration grade, modified bitumen, and emulsion to assess their performance characteristics.4. Assist in the quality control process by monitoring the consistency of bitumen products and reporting any deviations from the standard.5. Collaborate with quality assurance teams to ensure bitumen products comply with national and international standards.6. Record and document test results accurately, ensuring that data is stored for future reference and reporting purposes.7. Ensure all laboratory equipment is properly maintained, calibrated, and in good working order.8. Report any malfunctioning or damaged equipment to the supervisor and coordinate necessary repairs.9. Perform routine checks on laboratory tools and instruments to guarantee accurate and reliable test results.10. Follow strict laboratory safety protocols and procedures while handling chemicals, equipment, and bitumen samples.11. Ensure that the lab environment is kept clean and organized, adhering to environmental, health, and safety (EHS) guidelines.12. Maintain compliance with safety standards and regulations, including the proper disposal of hazardous materials.13. Maintain accurate and up-to-date records of all tests, observations, and procedures performed in the lab.14. Prepare detailed reports summarizing test results and provide insights into product quality.15. Assist in the analysis and interpretation of test data and provide recommendations for improvements if necessary.16. Assist the R&D team in the development of new bitumen formulations and product improvements.

We are looking for a dedicated Roustabout to join our team in the United Arab Emirates. As a Roustabout, you will play a crucial role in supporting the operations of our field team. Key Responsibilities:- Assist with Equipment Handling: You will help in loading, unloading, and moving various equipment essential for operations, ensuring that everything is in place for work to begin smoothly.- Maintain Worksite Cleanliness: It is your responsibility to keep the work area organized and clean, which helps prevent accidents and promotes a safe working environment.- Support Skilled Workers: You will assist experienced crew members, providing them with the tools and support they need to complete their tasks efficiently.- Follow Safety Protocols: You must adhere to safety guidelines at all times, ensuring that you and your teammates stay safe while performing your duties.- Perform General Maintenance: You may be required to carry out minor repairs and maintenance on the equipment, helping to keep everything in good working order. Required Skills and Expectations:Candidates should have a minimum educational qualification of a 12th pass. No prior experience is required, making this a great opportunity for those starting their careers. You must be physically fit to handle the demands of the job, including lifting and moving heavy equipment. A team player attitude is essential, as you will be working closely with others. You should also show a willingness to learn and adapt to new tasks quickly. Strong communication skills are important to effectively work with your team.

As a Fitter Turner, you will play a vital role in the manufacturing process by working with various machines to create and repair metal parts. Your primary responsibilities will include:- Setting Up Machines: Prepare and set up turning machines and tools to ensure they are ready for operation, following technical specifications.- Producing Components: Use lathes and milling machines to shape and cut metal pieces according to the required design and measurements.- Quality Checking: Regularly inspect and measure parts to ensure they meet defined quality standards and specifications, identifying any defects.- Maintenance of Equipment: Perform routine maintenance and minor repairs on machines to keep them in good working condition, ensuring minimal downtime.- Collaboration: Work closely with other team members and departments to ensure efficient workflow and communicate any issues that may arise during production.Required skills and expectations for this role include:- Technical Knowledge: You should have a solid understanding of fitting and turning techniques, as well as the operation of relevant machinery.- Attention to Detail: A keen eye for precision is crucial, as you will be working with intricate parts where even small mistakes can lead to significant issues.- Problem-solving Skills: Ability to troubleshoot and resolve issues that arise during the manufacturing process effectively.- Physical Stamina: This job requires manual labor and the ability to stand for long periods, so physical fitness is important.- Basic Computer Literacy: Familiarity with basic computer operations may be beneficial for tracking production and maintaining records.

Overview :An ECG (Electrocardiogram) Technician is a healthcare professional who operates specialised machines to record the hearts electrical activity, assisting doctors in diagnosing cardiovascular diseases like arrhythmia and heart attacks. They prepare patients, attach electrodes, and perform tests such as resting ECG's and stress tests, ensuring accurate data collection.

Overview :An ECG (Electrocardiogram) Technician is a healthcare professional who operates specialised machines to record the hearts electrical activity, assisting doctors in diagnosing cardiovascular diseases like arrhythmia and heart attacks. They prepare patients, attach electrodes, and perform tests such as resting ECG's and stress tests, ensuring accurate data collection.

Key ResponsibilitiesThe role is a mix of technical skill and physical oversight.Machine Setup: Loading raw materials (workpieces) into the machine and installing the correct tools (drills, cutters).Operation: Starting the machine and monitoring the process to ensure it follows the pre-programmed instructions.Quality Control: Using precision measuring instruments like Vernier Calipers, Micrometers, and Bore Gauges to check if the finished part matches the blueprint.Maintenance: Cleaning the machine daily, checking coolant levels, and performing basic lubrication.Troubleshooting: Identifying if a tool is blunt or if the machine is making an unusual noise and reporting it to the supervisor.