Electrical Commissioning Engineer Jobs

Key ResponsibilitiesPanel Design, Engineering & DraftingSchematic & Layout Design: Design electrical schematic drawings, component layout diagrams, and wiring diagrams using CAD software (AutoCAD Electrical, EPLAN) or manual drafting.Component Sourcing & Bill of Materials (BOM): Prepare detailed BOMs, selecting right-sized circuit breakers (MCB, MCCB, ACB), contactors, relays, timers, PLCs, HMI, and busbars based on load requirements.Standards Compliance: Ensure all panel designs conform to relevant Indian Standards (IS) and international electrical safety codes.Assembly Supervision, Wiring & TestingWiring & Fabrication Supervision: Supervise shop-floor technicians during enclosure fabrication, busbar bending/mounting, component fixing, and internal wiring.Quality Control & Testing: Conduct thorough continuity checks, insulation resistance (Megger) testing, high-voltage (HV) tests, and functional/simulation testing of control logic prior to dispatch.Site Troubleshooting & Documentation: Coordinate with installation teams for on-site panel commissioning, fault-finding, and maintenance of complete as-built wiring manuals.

Hiring: PLC Automation EngineerLocation: BangaloreExperience: 8-12 YearsIndustry: Industrial Automation / ManufacturingWe are looking for an experienced PLC Automation Engineer to design, develop, commission, and troubleshoot industrial automation systems for manufacturing and production environments.Key Responsibilities:Develop and program PLC-based automation systems.Configure and troubleshoot PLCs, HMIs, and SCADA systems.Integrate sensors, drives, servo systems, and industrial control equipment.Conduct system testing, commissioning, and on-site troubleshooting.Analyze automation faults and implement corrective actions.Coordinate with electrical, mechanical, and production teams.Prepare control logic, technical documentation, and commissioning reports.Key Skills: PLC Programming, Siemens PLC, Allen-Bradley, HMI, SCADA, Industrial Automation, VFD, Servo Drives, Control Systems, Electrical Troubleshooting, System Commissioning

Seeking a skilled Testing & Commissioning Engineer to plan, execute, and supervise the testing, pre-commissioning, commissioning, and handover of MEP systems. The role involves verifying system performance, identifying defects, coordinating inspections and approvals, maintaining commissioning documentation, and ensuring all mechanical, electrical, plumbing, firefighting, fire alarm, ELV, HVAC, and BMS systems operate safely and efficiently in accordance with project specifications and applicable standards.Key Responsibilities:Prepare testing and commissioning plans, procedures, schedules, and checklists for MEP systems.Coordinate commissioning activities with project managers, consultants, subcontractors, and clients.Conduct pre-commissioning inspections to verify installation quality and compliance with approved drawings.Perform testing and commissioning of HVAC, electrical, plumbing, firefighting, fire alarm, ELV, and BMS systems.Verify equipment installation, functionality, and performance against project specifications.Conduct functional performance tests and integrated systems testing.Identify defects, prepare punch lists, and coordinate timely rectification.Ensure compliance with applicable standards, local authority regulations, project specifications, and safety requirements.Prepare commissioning reports, inspection records, test certificates, and related technical documentation.Coordinate third-party inspections and obtain necessary authority approvals.Prepare operation and maintenance manuals, as-built documentation, and commissioning dossiers for project handover.Support facility management teams during the Defects Liability Period (DLP).Ensure compliance with quality, health, safety, and environmental (QHSE) policies.Maintain testing equipment and ensure proper calibration of instruments.Required Skills & Qualifications:Bachelor's degree or Diploma in Mechanical Engineering, Electrical Engineering, or a related engineering discipline.3-8 years of experience in MEP testing and commissioning.Strong knowledge of HVAC equipment, including AHUs, FCUs, chillers, and pumps.Understanding of LV electrical systems, DG sets, transformers, UPS systems, and electrical testing procedures.Experience with firefighting systems, fire pumps, sprinklers, hydrants, and fire alarm systems.Knowledge of plumbing, water supply, drainage, smoke management, ELV, and BMS systems.Ability to perform functional testing, identify technical issues, and troubleshoot system faults.Basic knowledge of AutoCAD and proficiency in Microsoft Office.Strong documentation, communication, coordination, and problem-solving skills.Understanding of QA/QC procedures, safety compliance, and authority inspection requirements.Testing and Commissioning or HVAC certifications are advantageous.Knowledge of NFPA standards and IOSH, NEBOSH, OSHA, or electrical safety certifications is preferred.GCC/UAE project experience is an added advantage.

Job DescriptionTechnicom Engineers Network is looking for a motivated and technically skilled BMS Engineer to join our team. The candidate will be responsible for the installation, testing, commissioning, operation, troubleshooting and maintenance of Building Management System (BMS) and Building Automation Systems at various projects.Key Responsibilities* Install, configure, test and commission BMS and building automation systems.* Monitor and troubleshoot BMS-related issues at project sites.* Work with HVAC control systems and associated field devices.* Handle BMS controllers, sensors, actuators, panels and related equipment.* Perform system integration and communication testing.* Work with communication protocols such as BACnet, Modbus and other relevant protocols.* Coordinate with project, electrical, HVAC and other technical teams during installation and commissioning.* Carry out preventive maintenance, fault finding and corrective actions.* Prepare and maintain site reports, testing/commissioning records and other technical documentation.* Support project execution and ensure work is completed according to required quality and safety standards.* Travel to project sites as required.Required Skills* Good understanding of BMS / Building Automation Systems.* Knowledge of HVAC controls.* Basic knowledge of DDC / PLC / SCADA will be an advantage.* Knowledge of BACnet / Modbus is preferred.* Ability to troubleshoot electrical/control-system-related issues.* Good communication and coordination skills.* Willingness to work at project sites.

Job Descriptions Service / Residential EngineerInstallation & Commissioning of Electronic Weighbridge at the customer site. Giving online software support to customers. Coordination & maintaining cordial relationship with the customers. Fault Finding & Repair of the Electronic Weighbridge. Attend service calls from customers & provide telephonic support. Job involves travelling. Training will be provided in office.

- Key Responsibilities:1. Design and develop electrical systems: The engineer will be responsible for designing and developing electrical systems for various projects, ensuring they meet industry standards and client requirements.2. Conduct testing and troubleshooting: They will conduct testing on electrical systems to ensure functionality and troubleshoot any issues that may arise during the testing phase.3. Prepare technical reports and documentation: The engineer will be required to prepare technical reports documenting the design process, testing results, and any modifications made to the electrical systems.4. Collaborate with team members: They will collaborate with other team members, including project managers and other engineers, to ensure projects are completed on time and within budget.- Required Skills and Expectations:1. Strong knowledge of electrical engineering principles: The candidate should have a solid understanding of electrical engineering principles and how they apply to real-world projects.2. Proficiency in AutoCAD and other design software: Experience with AutoCAD and other design software is essential for this role to create detailed electrical designs.3. Good communication skills: The engineer should have good communication skills to effectively collaborate with team members and communicate technical information to non-technical stakeholders.4. Ability to work independently and in a team: The candidate should be able to work independently on tasks assigned to them while also being a team player and collaborating with other team members effectively.

PROTECTION RELAY ENGINEER POWER SYSTEM PROTECTION EXPERT A skilled Protection Relay Engineer plays a vital role in ensuring power system reliability, safety, and fast fault clearance across substations and industrial power networks. Key Skills & Expertise Relay Testing & Commissioning (Numerical / Static / Electromechanical) Distance, Differential, Overcurrent & Earth Fault Protection Transformer, Generator & Motor Protection Relay Configuration, Setting & Coordination Secondary Injection Testing (OMICRON / FREJA / MEGGER) CT / PT Testing & Verification SCADA & Substation Automation Fault Analysis & Troubleshooting Commissioning: 11kV / 33kV / 66kV / 132kV & Above Preventive & Breakdown Maintenance Industries Served Power Transmission & Distribution Substations & Switchyards Renewable Energy (Solar / Wind) Industrial Utilities WhatsApp & Calling: 76000 96674 Website: www.powertest.in

Installation & commissioning of machinery/equipmentRoutine maintenance, inspection, and troubleshootingAttend breakdown calls and ensure minimal downtimeProvide technical support to customers on-site & remotelyPrepare accurate service reports and documentationCoordinate with internal teams for parts, repairs, and solutionsEnsure adherence to safety, quality, and company standardsMaintain strong customer relationships and professionalismWillingness to travel as per service requirementsExperience in after-sales/service engineering preferred

Electrical supervisor cum surveyor required for 11KV and LT lines work at Ludhiana, Punjab

Pay: 400,000.00 - 500,000.00 per yearJob description:As a head of our electrical project management team, you will assist in coordinating electrical lighting projects from initiation to completion, ensuring timely and successful delivery.Responsibilities Lead project team in planning, coordinating, and executing LED lighting projects. Coordinate with cross-functional teams, including sales, engineering, purchase and production. Manage project documentation, schedule and budget. Conduct site visits and inspections to ensure project quality and progress. Coordinate with various govt. departments for payment processing. Identify and mitigate project risks and develop contingency plans. Communicate project updates and status to management.Requirements5-6 years of experience in electrical/lighting project coordination.Bachelor's degree in Electrical Engineering/ Diploma in Electrical Engineering.Excellent communication, organizational, and problem-solving skillsAbility to work in a fast-paced environment and prioritize multiple tasksProficiency in MS Office, particularly MS Excel.Preferred Qualifications:Experience in the LED lighting industry or related field.Understanding of basic electrical concepts.Job Types: Full-time, PermanentBenefits:Provident FundLanguage: Telugu, Hindi and EnglishEnglish (Preferred)Work Location: In person

We are seeking a highly skilled and experienced Electrical Engineer or Electrical Project Manager to oversee electrical installation and commissioning works across our project locations. The ideal candidate will have a strong background in handling electrical systems for construction or industrial projects, with proven experience in MEP-focused roles. The position requires hands-on supervision, technical knowledge, and the ability to coordinate across various teams to ensure timely and quality project execution. The candidate must possess strong team leadership capabilities to manage and guide site engineers, technicians, and support staff throughout project lifecycles.Key Responsibilities:Lead and manage a team of engineers, supervisors, and site staff to effectively execute all electrical works on site.Ensure the team performs assigned responsibilities with a focus on quality, safety, and timely delivery.Supervise the installation, testing, and commissioning of key power infrastructure including transformers, HT/LT panels, DG sets, and substation components.Conduct erection of double-pole structures and transformer substations in accordance with site requirements.Oversee underground and overhead cable laying activities in alignment with approved project drawings while accommodating site-specific conditions.Manage reconductoring and replacement of HT/LT lines, installation of new double pole structures, and erection of spun poles.Inspect and supervise all cable termination and identification work to ensure quality and accuracy across internal and external wiring systems.Ensure effective communication and collaboration between engineering teams, site staff, and management to maintain smooth workflow and resolve issues promptly.Qualifications and Experience:Bachelors Degree in Electrical Engineering or a related field.Minimum of 10 years of relevant experience in electrical installation, testing, andcommissioning within construction or industrial environments.M.Tech in Electrical Engineering is preferable but not mandatory.Proven ability to lead and manage teams in a project execution environment.Strong knowledge of MEP systems, site execution practices, and electrical safety standards.Demonstrated leadership, attention to detail, and ability to manage multiple tasks while working closely with cross-functional teams.

o Perform site-specific testing and commissioning of electrical equipment, including transformers, switchgear, circuit breakers, protection relays, bus bars, cables, and more.o Execute tests for both Low Tension (LT) and High Tension (HT) equipment in compliance with national and international standards.o Coordinate and supervise electrical pre-commissioning, commissioning, and start-up activities for power plants and substations.

This is a Chennai based 25yrs old Weighing and Bagging machines manufacturing company. We need Service Engineers for servicing Weighing and Bagging machines to work all over Maharashtra.Candidates having experience in sevicing Sugar silo machines or Weighing and Bagging machines or who has worked in sugar factories are needed on urgent basis. Good salary package and conveyance is paid.And performance bonuses n yearly bonuses is given.Freshers are welcome.send ur cv to Shalini at hitechbag dot com

Requirement for Electrical Commissioning Engineer. Drives Commissioning Plc

BMS Engineer - Urgent HiringTechnicom Engineers Network is looking for an experienced and technically skilled BMS Engineer to join our team. The candidate will be responsible for handling Building Management System (BMS), Building Automation and HVAC control systems across our projects.Key Responsibilities* Installation, testing and commissioning of BMS and Building Automation systems.* Configuration and monitoring of BMS systems and controllers.* Handling HVAC control systems, sensors, actuators and DDC controllers.* Troubleshooting BMS, HVAC control and communication-related issues.* Carrying out preventive and corrective maintenance of BMS systems.* Working with communication protocols such as BACnet and Modbus.* Coordinating with electrical, HVAC, project and site teams for smooth project execution.* Performing system testing, integration and commissioning at project sites.* Preparing site reports, testing/commissioning documents and other technical records.* Identifying faults and providing appropriate technical solutions.* Ensuring project work is completed according to required quality and safety standards.* Willingness to travel to project sites as required.Required Skills* Strong knowledge of BMS / Building Management Systems.* Hands-on experience in Building Automation.* Knowledge of HVAC Controls and DDC.* Experience in BMS installation, commissioning and troubleshooting.* Knowledge of BACnet / Modbus.* Understanding of sensors, actuators, controllers and BMS panels.* Knowledge of PLC/SCADA will be an added advantage.* Good technical, communication and coordination skills.* Ability to work independently as well as with project/site teams.Educational QualificationDiploma / B.E. / B.Tech in Electrical, Electronics, Instrumentation, Mechanical Engineering or a related field.Experience3-4+ years of relevant hands-on experience in BMS / Building Automation / HVAC Controls is preferred.Candidates with experience in BMS platforms such as Siemens, Schneider, Honeywell, Johnson Controls, Delta, Trane or other similar systems will be preferred.

Service Engineer - Automation Industrial AutomationExperience: 6-9 YearsLocation: PuneHiring Company: Talent Zone ConsultantBrief JD:We are hiring a Service Engineer - Automation with strong experience in industrial automation equipment and control systems. The role involves installation, commissioning, troubleshooting, preventive maintenance and providing technical support to customers at site.Key Responsibilities:Install, commission and service automation systems.Troubleshoot PLC, HMI, VFD, servo and control system issues.Conduct preventive and corrective maintenance.Provide onsite technical support and resolve customer issues.Coordinate with engineering and project teams.Prepare service reports and technical documentation.Travel to customer sites as required.Relevant Skillset:Industrial Automation, Service Engineering, PLC, HMI, VFD, Servo, SCADA, Sensors, Control Systems, Electrical Troubleshooting, Installation, Commissioning, Preventive Maintenance, Field Service, Customer Support

PLC EngineerExperience: 9-12 YearsLocation: HyderabadHiring Company: Talent Zone ConsultantBrief JD:We are hiring a Senior PLC Engineer with strong experience in industrial automation, PLC programming and control systems. The role involves PLC/HMI programming, machine automation, commissioning, troubleshooting and coordination with project and customer teams.Key Responsibilities:Develop, modify and troubleshoot PLC programs.Configure and integrate HMI/SCADA systems.Execute automation projects from design through commissioning.Perform machine testing, commissioning and troubleshooting.Coordinate with electrical, mechanical and project teams.Provide onsite technical support to customers.Prepare technical documentation and project reports.Relevant Skillset:PLC Programming, Industrial Automation, Siemens PLC, Allen Bradley, Rockwell, HMI, SCADA, VFD, Servo, Motion Control, Control Systems, Electrical Panels, Commissioning, Troubleshooting, AutoCAD, TIA Portal

Company DescriptionPowertest Solutions is proud to introduce the AMT 205, a cutting-edge Multifunctional Relay testing kit, specially manufactured in India to support the Make in India initiative. Designed to test a wide range of sub-station equipment such as power transformers, current transformers, potential transformers, circuit breakers, and more, the AMT 205 offers high precision and versatility. Featuring multiple current and voltage sources, analog binary inputs and outputs, and comprehensive testing capabilities, our product ensures reliability and accuracy. We provide a 3-year warranty and 24/7 support, setting us apart in the industry and dedicated to enhancing your electrical equipment testing experience.Role DescriptionThis is a full-time remote role for a Protection Relay Engineer. The Protection Relay Engineer will be responsible for conducting tests and maintenance on sub-station equipment using the AMT 205 testing kit. Tasks include analyzing and troubleshooting protection relay systems, preparing test reports, ensuring compliance with industry standards, and providing technical support to clients. The engineer will collaborate closely with team members to improve testing procedures and solve complex issues effectively.QualificationsKnowledge in testing and maintaining protection relays and sub-station equipmentExperience with troubleshooting, analyzing, and resolving technical issues related to electrical testingStrong understanding of industry standards and regulatory compliance for electrical testingAbility to prepare detailed technical reports and documentation of testing resultsEffective communication skills for providing technical support and collaborating with team membersBachelor's degree in Electrical Engineering or a related fieldExperience with AMT 205 or similar relay testing kits is a plusProficiency in using related software and testing toolsAbility to work independently and remotely, managing multiple tasks efficiently

We're seeking an experienced Installation Engineer to oversee the installation of electrical DC and AC systems for our solar plant projects. The ideal candidate will have 3-5 years ofexperience in solar plant installation and will be responsible for ensuring the successful execution of electrical systems.Key Responsibilities: Install and commission electrical DC and AC systems, including:- MMS (Mounting Structures) and module installation- Inverter and transformer installation- 33 kV transmission line (TL) and bay work- SEM (Substation Equipment Management) and electrical equipment installation Ensure compliance with electrical safety standards and company policies Troubleshoot and resolve installation issuesCollaborate with project teams to ensure project timelines are metConduct quality checks to ensure installation meets specificationsRequirements: 3-5 years of experience in solar plant installation, with a focus on electrical DC and AC systems Strong knowledge of electrical engineering principles and solar plant designExperience with electrical installation, including MMS, inverters, and transformersExcellent problem-solving and communication skills Ability to work at heights and in outdoor environmentsPreferred Skills: Experience with solar plant installation software and tools Knowledge of relevant safety regulations and standards, such as IEC and IEEEExperience with testing and commissioning of electrical systems Strong attention to detail and quality focus

We are seeking a highly skilled and experienced Electrical Engineer to oversee electrical installation and commissioning works across our project locations. The ideal candidate will have a strong background in handling electrical systems for construction or industrial projects, with proven experience in MEP-focused roles. The position requires hands-on supervision, technical knowledge, and the ability to coordinate across various teams to ensure timely and quality project execution.Key Responsibilities:Supervise the installation, testing, and commissioning of key power infrastructure including transformers, HT/LT panels, DG sets, and substation components.Conduct erection of double-pole structures and transformer substations in accordance with site requirements.Oversee underground and overhead cable laying activities in alignment with approved project drawings while accommodating site-specific conditions.Manage reconductoring and replacement of HT/LT lines, installation of new double pole structures, and erection of spun poles.Inspect and supervise all cable termination and identification work to ensure quality and accuracy across internal and external wiring systems.Qualifications and Experience:Bachelors Degree in Electrical Engineering or a related field.Minimum of 5 years of relevant experience in electrical installation, testing, and commissioning within construction or industrial environments.Strong knowledge of MEP systems, site execution practices, and electrical safety standards.Demonstrated leadership, attention to detail, and ability to manage multiple tasks while working closely with cross-functional teams.

Sl. No.-:- Role & Responsibility & AuthorityOne Time Activity -:-1. Setting up of technical training centre with planned training materials /tools etc2. SOP / check list update based on improvement.3. QMS awareness & Technical training (Civil / Electrical /Product) presentation update.4. Training plan and feedback & its evaluation, reporting. Effectiveness study based on feedback for FQC / PM. Training improvement plan.General Activity -:-5. Listing of running projects and understanding the needs and expectation of the client.6. Understanding the project schedule and interaction with PM and Quality regional manager for planning the technical training required at site.7. Module 1 civil, Module 2 Electrical installation, Module 3 Product commissioning, QMS practical session as per procedure to be explained in detail. Attendance & feedback to be obtained.8. For newly joined peoples for site supervision activity, on job training to be given at training centre as per training procedure.9. Regular QMS audit as per plan and improve the system in all projects and O & M site.10. Supporting cross functional team for RCA-CAPA and improve the product & process quality both at OEM and EPC.

Key Responsibilities & DutiesSite Testing & Commissioning:Perform cold and hot commissioning activities, loop checking, signal testing, and equipment interlock verifications for thermal power plant subsystems.Execute performance guarantee (PG) tests, trial runs, and functional verification of auxiliary machinery, pumps, control valves, and electrical systems.Prepare and maintain commissioning checklists, test reports, snag lists, and site handover documentation in coordination with project managers and client engineers.Plant Operations & Routine Maintenance:Monitor daily operational parameters (temperature, pressure, flow rate, vibration, and heat heat rates) of thermal power units to ensure optimal plant efficiency.Diagnose, troubleshoot, and resolve mechanical, electrical, or C&I (Control & Instrumentation) faults to minimize plant downtime.Carry out preventive, breakdown, and predictive maintenance programs according to equipment manuals and standard operating procedures (SOPs).Safety Compliance & Site Coordination:Strictly enforce Plant Safety Rules, Permit to Work (PTW) systems, Isolation/Lockout-Tagout (LOTO) protocols, and EHS (Environment, Health & Safety) guidelines during all site operations.Coordinate daily site schedules with main contractors, original equipment manufacturers (OEMs), site supervisors, and client representatives.

Job Descriptions Service / Residential EngineerInstallation & Commissioning of Electronic Weighbridge at the customer site. Giving online software support to customers. Coordination & maintaining cordial relationship with the customers. Fault Finding & Repair of the Electronic Weighbridge. Attend service calls from customers & provide telephonic support. Job involves travelling. Training will be provided at Pune office for Job.

Installation & Commissioning of Electronic Weighbridge at the customer site. Giving online software support to customers. Coordination; maintaining cordial relationship with the customers. Fault Finding; Repair of the Electronic Weighbridge. Attend service calls from customers & provide telephonic support. Job involves travelling. Training will be provided. Immediate Joiner.