Aviation Job Vacancies in Andheri

An Aircraft Maintenance Engineer (AME) is responsible for ensuring that aircraft are safe, airworthy, and ready for flight. They inspect, repair, maintain, and certify aircraft systems in compliance with aviation safety standards. Key ResponsibilitiesPerform routine inspections before and after flightsDiagnose and troubleshoot aircraft mechanical/electrical issuesRepair and replace faulty components (engines, hydraulics, avionics)Conduct scheduled maintenance checks (A, B, C, D checks)Maintain accurate maintenance logs and documentationEnsure compliance with aviation authorities like DGCACertify aircraft as airworthy for operationWork closely with pilots and ground staff Skills RequiredStrong knowledge of aircraft systems & engineering principlesAttention to detail and safety awarenessProblem-solving and troubleshooting skillsTechnical proficiency with tools and diagnostic equipmentTeamwork and communication skills Educational QualificationAME Course approved by DGCAOR Diploma/Degree in Aeronautical EngineeringLicensing is mandatory (Category B1/B2) Work EnvironmentAirports, hangars, maintenance basesShift-based work (including nights & weekends)Physically demanding and safety-critical role Salary (India Approx.)Fresher: 3 - 5 LPAExperienced: 6 - 15+ LPA

Job SummaryThe Air Hostess (Cabin Crew) is responsible for ensuring passenger safety, comfort, and satisfaction onboard the aircraft. The role involves delivering high-quality customer service, conducting safety procedures, handling emergency situations, and representing the airline with professionalism and confidence. Key Responsibilities Safety & Security DutiesConduct pre-flight safety checks of cabin equipmentPerform safety demonstrations and ensure passenger complianceEnforce aviation safety and security regulationsHandle emergency situations (evacuation, medical aid, fire, turbulence)Provide first aid assistance when requiredMonitor cabin throughout the flight to ensure safety Passenger Service & HospitalityGreet and welcome passengers onboardAssist passengers with seating, baggage, and special needsProvide onboard food, beverage, and retail servicesHandle passenger complaints and requests professionallyEnsure passenger comfort throughout the flight Pre-Flight & Post-Flight DutiesAttend pre-flight briefingsCheck passenger manifests and special requirementsEnsure cabin cleanliness and readinessComplete post-flight reports and documentationCoordinate with pilots and ground staff Teamwork & CoordinationWork closely with cockpit crew and fellow cabin crewMaintain clear communication during all flight phasesSupport team members to ensure smooth inflight operations Required Skills & CompetenciesExcellent communication and interpersonal skillsStrong customer service orientationAbility to remain calm under pressureProblem-solving and decision-making skillsHigh attention to detail and responsibilityTeamwork and adaptability Education & QualificationsMinimum 12th Pass / GraduateCabin Crew / Aviation training (preferred)Valid passport (mandatory)Freshers with strong communication and personality can apply Grooming, Physical & Medical RequirementsProfessional appearance and grooming as per airline standardsHeight, arm reach, eyesight as per airline normsGood overall medical fitnessAbility to stand for long hours and work long-haul flightsWillingness to work rotational shifts, nights, weekends, holidays

Job SummaryGround Staff are responsible for ensuring smooth airport operations by assisting passengers, coordinating baggage handling, managing check-in and boarding procedures, and maintaining safety and service standards. They serve as the face of the airline, ensuring a positive passenger experience and efficient flight operations.Key ResponsibilitiesPassenger HandlingAssist passengers during check-in, security checkpoints, boarding, and arrivals.Verify passenger documents, passports, and tickets.Provide information regarding flight schedules, delays, and gate changes.Handle passenger queries, complaints, and special assistance requests (PRM, unaccompanied minors, elderly passengers).Check-In & Boarding OperationsOperate the departure control system (DCS) to check in passengers and issue boarding passes.Tag and check baggage, ensuring weight and security regulations are followed.Coordinate boarding announcements and escort passengers to the aircraft when needed.Ensure accuracy of the passenger manifest.Baggage Handling SupportCoordinate with ramp and baggage handling teams for loading/offloading.Manage lost, delayed, or damaged baggage reports.Assist in baggage tracing and documentation.Safety & Security ProceduresFollow all airport and airline safety guidelines.Ensure restricted areas are secured and only authorized personnel access them.Report any suspicious activity or security concerns immediately.Customer ServiceProvide excellent customer service at all times.Assist VIP passengers, transit passengers, and passengers requiring special care.Handle service recovery during delays, cancellations, or disruptions.Coordination & CommunicationWork closely with cabin crew, airport authorities, and ground handling agents.Relay flight-related information to the operations control center.Support load control, gate coordination, and aircraft turnaround processes.Administrative TasksMaintain documentation and operational reports.Update flight information systems.Assist with daily shift handovers and briefings.Required Skills & QualificationsSkillsStrong communication and interpersonal skillsCustomer service orientationProblem-solving and quick decision makingAbility to multitask and work under pressureTeamwork and coordinationBasic computer and system-handling skillsQualificationsMinimum: 10+2 (Higher Secondary) or equivalentBachelors degree preferred (for senior roles)Fluency in English and local languagesBasic knowledge of aviation operations (training can be provided)Age and grooming standards as per airline policyWork EnvironmentShift-based work, including weekends and holidaysStanding for extended hoursFast-paced and high-pressure airport environment

Job SummaryAn Air Hostess is responsible for ensuring the safety, comfort, and well-being of passengers throughout the flight. The role includes providing exceptional customer service, conducting safety procedures, handling in-flight emergencies, and representing the airline with professionalism and grace.Key Responsibilities1. Passenger ServiceGreet passengers warmly and assist them during boarding and disembarkationHelp passengers find seats, stow luggage, and settle comfortablyAddress passenger questions, requests, or special needsProvide assistance to elderly passengers, children, and persons with reduced mobility (PRM)2. Safety ProceduresConduct pre-flight safety checks of the cabin and equipmentDemonstrate safety instructions and emergency proceduresEnsure compliance with all aviation safety regulationsAssist during emergencies such as medical issues, turbulence, or evacuationsOperate safety equipment as required3. In-Flight ServiceServe meals, snacks, and beveragesHandle duty-free sales (where applicable)Maintain cleanliness and order in galley and cabin areasMonitor passenger behavior and ensure comfort throughout the flight4. Customer Care & Conflict ResolutionProvide high-quality service and maintain a friendly atmosphereAddress complaints or conflicts calmly and professionallyResolve passenger issues using discretion and empathyHandle difficult or anxious passengers with patience5. Communication & CoordinationWork closely with the cabin crew team and flight deckReport any irregularities or incidents to the Cabin SupervisorCommunicate important announcements clearly to passengers6. Pre-flight & Post-flight DutiesAttend pre-flight briefings to understand flight details, passenger profiles, and service updatesEnsure sufficient stock of in-flight suppliesComplete post-flight reports and documentationPerform cabin checks after landingRequired Skills & QualificationsSkillsExcellent communication and interpersonal skillsStrong customer service orientationAbility to remain calm under pressureGood problem-solving and decision-making abilitiesProfessional grooming and appearanceTeamwork and collaboration skillsCultural sensitivity and emotional intelligenceQualificationsMinimum: 10+2 (Higher Secondary)Diploma or certification in aviation/hospitality (preferred)Fluency in English; additional languages are an assetBasic knowledge of first aid (training provided)Must meet airline-specific height, BMI, and grooming criteriaMust hold a valid passport and be willing to travel extensivelyWork EnvironmentVariable working hours including nights, weekends, and holidaysExtensive travel, layovers, and time away from homeFast-paced environment requiring physical staminaWorking at high altitudes and confined spaces inside aircraft

Job SummaryThe Avionics Engineer is responsible for the design, development, testing, installation, and maintenance of aircraft electronic systems. This role ensures safe, efficient, and compliant operation of avionics equipment including communication, navigation, surveillance, and flight control systems. The engineer works closely with cross-functional teams to support system integration, troubleshooting, upgrades, and continuous improvement in aviation technology. Key ResponsibilitiesDesign & Development:Design, develop, and integrate avionics systems for aircraft and aerospace applications.Create system schematics, wiring diagrams, and interface control documents.Develop embedded software or hardware for avionics components.Testing & Troubleshooting:Conduct system testing, validation, calibration, and verification to ensure performance standards.Diagnose issues in avionics equipment using testing tools and propose corrective actions.Perform root cause analysis for system failures and implement preventive measures.Installation & Integration:Oversee installation and configuration of avionics systems in aircraft.Ensure seamless integration of avionics with electrical, mechanical, and flight control systems.Coordinate with manufacturing, maintenance, and flight operations teams for system implementation.Compliance & Documentation:Ensure compliance with aviation authorities (FAA, EASA, DGCA) and safety standards.Prepare technical reports, maintenance manuals, and certification documentation.Maintain accurate documentation of design changes, test results, and system configuration.Maintenance & Support:Support maintenance teams in periodic inspections, upgrades, repairs, and system checks.Provide engineering support for aircraft modifications, retrofits, and new product introductions. Required Skills & CompetenciesTechnical Skills:Strong knowledge of communication, navigation, surveillance, autopilot, and flight control systems.Expertise in embedded systems, digital/analog electronics, and circuit design.Hands-on experience with avionics protocols (e.g., ARINC 429, MIL-STD-1553, CAN bus).Proficiency in tools such as MATLAB/Simulink, LabVIEW, PSPICE, Altium, Xilinx, or similar.Knowledge of aviation standards DO-178C, DO-254, RTCA, FAA/EASA guidelines.Soft Skills:Analytical and problem-solving ability with strong attention to detail.Effective communication, teamwork, documentation, and time-management skills.Ability to work under pressure and meet strict deadlines. Education & Experience RequirementsBachelors degree in Avionics Engineering, Aerospace Engineering, Electronics & Communication, Electrical Engineering, or related field.(Preferred) Masters degree in Avionics or related specialization.Experience:Entry Level: 02 yearsMid-Level: 37 yearsSenior: 8+ years in avionics engineering or related aerospace domain Work EnvironmentMay require working in aircraft hangars, manufacturing facilities, laboratories, or test sites.Willingness to travel for project support, testing, and system installation.Must adhere to aviation safety regulations and workplace safety protocols. Job Type & CompensationFull-time / PermanentCompetitive salary based on experience and qualificationsBenefits: Health insurance, travel allowance, training & professional development

Position OverviewThe Aircraft Mechanic / Aircraft Technician is responsible for performing maintenance, repair, inspection, and modification tasks on aircraft to ensure they are safe, airworthy, and fully operational. The role involves hands-on technical work, strict adherence to aviation regulations, and close coordination with engineers, quality inspectors, and flight crews to support efficient flight operations.Key Responsibilities Aircraft Maintenance & RepairPerform scheduled (A, B, C, D checks) and unscheduled maintenance on aircraft and components.Inspect, troubleshoot, and repair airframes, engines, hydraulic, pneumatic, fuel, and electrical systems.Carry out defect rectification, part replacement, and system testing as per maintenance manuals.Conduct routine inspections and ensure all work meets safety and airworthiness standards.Perform line maintenance and base maintenance activities according to daily operational needs.Support pre-flight and post-flight checks to ensure aircraft readiness. Technical & Diagnostic WorkDiagnose and repair mechanical and electrical malfunctions using testing equipment and manuals.Follow manufacturer and regulatory guidelines for maintenance tasks.Utilize specialized tools, precision instruments, and ground support equipment (GSE).Coordinate with engineers to ensure accurate troubleshooting and defect clearance.Ensure calibration and care of maintenance tools and test instruments. Documentation & ReportingRecord all maintenance activities in job cards, logbooks, and technical documents.Update maintenance tracking systems (e.g., AMOS, Trax, Ramco, or Rusada Envision).Ensure accurate documentation for all inspections, replacements, and modifications.Report component failures, delays, and discrepancies to supervisors or engineering teams.Maintain proper traceability of spares and materials used in maintenance. Safety & ComplianceComply with DGCA / FAA / EASA / CAR-145 safety and maintenance standards.Adhere to company safety management systems (SMS) and quality procedures.Follow proper lockout/tagout and hazardous materials handling procedures.Conduct work in accordance with approved maintenance data and aviation legislation.Ensure Foreign Object Damage (FOD) control and maintain a clean work environment. Team CoordinationWork collaboratively with engineers, quality control inspectors, and flight operations teams.Assist in training junior technicians or apprentices on maintenance practices.Communicate effectively with supervisors regarding progress and issues.Support quick turnaround during AOG (Aircraft on Ground) situations.Required Skills & CompetenciesExcellent technical and mechanical aptitude.Strong problem-solving and troubleshooting skills.Proficiency in using hand tools, torque wrenches, and diagnostic equipment.Sound understanding of aviation maintenance manuals and documentation.High level of attention to detail, accuracy, and discipline.Ability to work under pressure, at heights, and in outdoor conditions.Good communication and teamwork abilities.Educational QualificationDiploma / Degree in Aircraft Maintenance Engineering (AME) or Aeronautical Engineering.Certification from an approved training organization (DGCA / EASA / FAA Part-147).Valid AME license in relevant category (B1 Mechanical / B2 Avionics) preferred.Experience05 years of experience in aircraft maintenance, repair, or overhaul (MRO).Experience on specific aircraft types (e.g., Airbus A320, Boeing 737, ATR, Embraer) is an advantage.Fresher candidates with DGCA-approved AME training may also apply (for trainee roles).Working ConditionsWork performed in hangars, workshops, or ramp areas (day/night shifts).May involve rotational shifts, weekends, and emergency standby duties.Physically demanding role requiring manual handling, climbing, and precision work.

Job Summary:The Admin Operations Manager is responsible for overseeing and coordinating all administrative and operational functions within the organization. This role ensures smooth day-to-day operations, effective resource utilization, adherence to company policies, and a safe and efficient work environment. The Admin Operations Manager acts as the central link between management, staff, and external vendors to ensure business continuity and operational excellence.Key Responsibilities: 1. Administrative ManagementSupervise all administrative activities including office management, logistics, and facility operations.Develop, implement, and monitor Standard Operating Procedures (SOPs) to improve efficiency and consistency.Maintain accurate records of office assets, inventory, and documentation.Oversee procurement of office supplies, equipment, and vendor contracts.Ensure compliance with statutory, health, and safety regulations. 2. Operational OversightPlan and manage daily operations to ensure seamless workflow across departments.Identify process gaps and recommend operational improvements to enhance productivity.Coordinate with internal teams to ensure alignment between administrative and business goals.Monitor and evaluate performance metrics, generating periodic operational and financial reports.Oversee maintenance, housekeeping, and facility management services. 3. People & Vendor ManagementLead and supervise administrative and support staff to ensure efficiency and professionalism.Conduct training, performance evaluations, and team development activities.Manage vendor relationships negotiate contracts, ensure service quality, and control costs.Foster a positive work culture focused on collaboration, accountability, and high performance. 4. Budgeting & Cost ControlPrepare and manage annual operational and administrative budgets.Track expenditures and identify cost-saving opportunities without compromising quality.Support finance teams in audits, expense reporting, and budget analysis. 5. Communication & CoordinationAct as a liaison between management, employees, and external agencies.Ensure smooth communication flow across departments and timely issue resolution.Prepare reports, presentations, and administrative updates for senior management.Qualifications and Requirements:Bachelors degree in Business Administration, Management, or a related field.MBA or equivalent qualification preferred.06 years of experience in administration or operations, including managerial experience.Strong knowledge of office management, procurement, and vendor coordination.Proficiency in MS Office (Excel, Word, PowerPoint) and ERP or administrative management systems.Excellent leadership, communication, and organizational skills.Ability to multitask and manage time effectively under pressure.Knowledge of compliance, safety, and statutory regulations.Key Skills:Leadership and team managementStrategic planning and executionProcess improvement and operational efficiencyBudgeting and cost controlVendor and facilities managementCommunication and problem-solvingAnalytical thinking and reportingPerformance Indicators:Operational efficiency and process improvement metricsBudget adherence and cost control effectivenessStaff performance and retention ratesCompliance and audit scoresTimeliness and accuracy of reporting

Responsibilities:1. Design and implement electrical systems for various projects2. Conduct feasibility studies and cost estimates for electrical installations3. Develop and maintain technical documentation for electrical systems4. Troubleshoot and resolve electrical issues on site5. Collaborate with other engineers and project teams to ensure successful completion of projects6. Stay updated with industry trends and regulations related to electrical engineering7. Ensure compliance with safety standards and protocols8. Provide mentorship and guidance to junior engineers

We are looking for 71 Vacancies for Mechanical and Electrical Engineers at Aviation Industries Posts in Mumbai, Bangalore, Coimbatore, Imphal, Kolkata, Hyderabad, Tiruchirappalli/Trichy, Chennai, Kozhikode/Calicut, Surat, with deep knowledge in Aircraft Maintenance, Electrical Engineer, Mechanical Engineer, Aerospace Engineering, Aeronautical Engineer, Avionics, Aircraft Engineer, Aircraft Maintenance Engineering and Required Educational Qualification is : I.T.I., B.E, B.Tech, Other Bachelor Degree, Post Graduate Diploma, M.Tech, Any Master Degree

We have vacant of 47 Jobs for Aeronautical Engineer at Aviation Industry Jobs in Mumbai, Visakhapatnam, Trivandrum/Thiruvananthapuram, Chennai, Vijayawada, Tiruchirappalli/Trichy, Ahmedabad, Imphal, Pune, Jammu, for Freshers Educational Qualification : I.T.I., B.E, B.Tech, Other Bachelor Degree, Post Graduate Diploma, M.Tech, Any Master Degree Skill Aeronautical Engineer, Aeronautical Analyst, Aeronautical, Aircraft Maintenance, Aircraft Maintenance Engineer, Aircraft Engineer, Electrical Engineer, Site Engineer, Mechanical Engineer, Aerospace Engineering, Aircraft Technician, Aircraft Mechanic etc.