Systems Engineer Jobs in India

Seeking a skilled Testing & Commissioning Engineer to plan, execute, and supervise the testing, pre-commissioning, commissioning, and handover of MEP systems. The role involves verifying system performance, identifying defects, coordinating inspections and approvals, maintaining commissioning documentation, and ensuring all mechanical, electrical, plumbing, firefighting, fire alarm, ELV, HVAC, and BMS systems operate safely and efficiently in accordance with project specifications and applicable standards.Key Responsibilities:Prepare testing and commissioning plans, procedures, schedules, and checklists for MEP systems.Coordinate commissioning activities with project managers, consultants, subcontractors, and clients.Conduct pre-commissioning inspections to verify installation quality and compliance with approved drawings.Perform testing and commissioning of HVAC, electrical, plumbing, firefighting, fire alarm, ELV, and BMS systems.Verify equipment installation, functionality, and performance against project specifications.Conduct functional performance tests and integrated systems testing.Identify defects, prepare punch lists, and coordinate timely rectification.Ensure compliance with applicable standards, local authority regulations, project specifications, and safety requirements.Prepare commissioning reports, inspection records, test certificates, and related technical documentation.Coordinate third-party inspections and obtain necessary authority approvals.Prepare operation and maintenance manuals, as-built documentation, and commissioning dossiers for project handover.Support facility management teams during the Defects Liability Period (DLP).Ensure compliance with quality, health, safety, and environmental (QHSE) policies.Maintain testing equipment and ensure proper calibration of instruments.Required Skills & Qualifications:Bachelor's degree or Diploma in Mechanical Engineering, Electrical Engineering, or a related engineering discipline.3-8 years of experience in MEP testing and commissioning.Strong knowledge of HVAC equipment, including AHUs, FCUs, chillers, and pumps.Understanding of LV electrical systems, DG sets, transformers, UPS systems, and electrical testing procedures.Experience with firefighting systems, fire pumps, sprinklers, hydrants, and fire alarm systems.Knowledge of plumbing, water supply, drainage, smoke management, ELV, and BMS systems.Ability to perform functional testing, identify technical issues, and troubleshoot system faults.Basic knowledge of AutoCAD and proficiency in Microsoft Office.Strong documentation, communication, coordination, and problem-solving skills.Understanding of QA/QC procedures, safety compliance, and authority inspection requirements.Testing and Commissioning or HVAC certifications are advantageous.Knowledge of NFPA standards and IOSH, NEBOSH, OSHA, or electrical safety certifications is preferred.GCC/UAE project experience is an added advantage.

We are seeking a dedicated CCTV Operator to monitor and maintain security systems in our office in Chennai. This is a full-time position suitable for freshers who have completed their 12th grade.nnKey Responsibilities: n- Monitor Surveillance Footage: Continuously observe live video feeds from CCTV cameras to ensure safety and security within the premises. n- Report Incidents: Quickly identify and report any suspicious activities or incidents to the relevant authorities to ensure a prompt response. n- Maintain Equipment: Regularly check and maintain CCTV equipment to ensure it is functioning properly and report any technical issues. n- Collaborate with Security Team: Work closely with the security team to develop effective monitoring strategies and assist in investigations when required. nnRequired Skills and Expectations: nCandidates should have a keen eye for detail and the ability to make quick decisions based on visual information. Good communication skills are essential for reporting incidents clearly and accurately. Familiarity with CCTV systems and basic troubleshooting is preferred, though not mandatory. Additionally, a sense of responsibility and commitment to maintaining safety standards is essential for this role. A willingness to learn and adapt in a fast-paced environment will be highly regarded.

The person should have working Hands on experience in Preventive and breakdown maintenance of critical process & lab equipment of Injectable, including the lyophilizer with Automatic Loading Unloading System IMA , Vial filling line(including Washing,Tunnel,Sealing) IMA, Manufacturing vessels, CIP/SIP Systems, Passboxes, LAF, Autoclaves (fedegari & machine Fabrik), Automatic visual inspection machines ( brevetti), Automatic leak-test machines (Bonfigloi), Automatic labeling machines, Automatic cartonator ACG , Stability chambers Thermolab, Cold rooms Thermolab & blue star, and other associated process & Lab equipments.He should be well versed with GMP environment & Documentation.

Industrial Robotics EngineerExperience: 8-11 YearsLocation: PuneWe are hiring an Industrial Robotics Engineer to design, program, integrate, and optimize robotic systems and motion-control solutions for industrial automation applications.Key ResponsibilitiesDesign and implement industrial robotic systems and automation solutions.Develop robot programs, motion-control logic, and control sequences.Integrate robots with PLCs, sensors, servo drives, and other automation equipment.Perform robot commissioning, troubleshooting, and performance optimization.Support robotic cell integration and production-line automation.Collaborate with mechanical, electrical, and controls engineering teams.Ensure safety standards, system reliability, and project delivery timelines.Relevant SkillsIndustrial Robotics, Robot Programming, Motion Control, PLC, Servo Drives, Robot Integration, Industrial Automation, ABB Robots, FANUC, KUKA, Siemens PLC, Robot Simulation, Safety Systems, Commissioning, Troubleshooting

Job Opening: Desktop Support Engineer (Dahej - Banking Project)We are looking for a reliable Desktop Support Engineer to manage L1/L2 IT support for a leading bank in Dahej.Responsibilities: Hardware/software troubleshooting, OS installation, network connectivity, and daily IT ticket resolution. Location: DahejExperience: 1+ years preferredApply Now: Mail your resume to Call/WhatsApp +91 9662842618

HIRING NOW L1/L2 SUPPORT ENGINEER IMMEDIATE JOINERS PREFERREDCDA Technologies India Pvt. Ltd. is looking for experienced IT Support Engineers who are passionate about troubleshooting, networking, and end-user support. Position: L1/L2 Support Engineer Experience: 2-3 Years Work Location: Client Location (On-site) Joining: Immediate Joiners Preferred What We're Looking For Strong knowledge of Networking and troubleshooting Hands-on experience in Hardware troubleshooting Operating System (OS) troubleshooting and technical supportGood to Have: Basic Cybersecurity knowledge Client-facing experience Strong communication and problem-solving skills Ready for your next IT Support opportunity? Interested candidates can share their updated resumes at hr@cdatechindia.com or connect with me directly via LinkedIn DM. Know someone who fits this role? Share this opportunity with your network and help them take the next step in their career!#Hiring #ImmediateJoiners #ITSupport #L1Support #L2Support #Networking #TechnicalSupport #CDAtechnologies

We are looking for a skilled and responsible Laptop Repair Engineer who can diagnose, troubleshoot, and repair laptops and desktops efficiently. The candidate should have practical knowledge of hardware troubleshooting, motherboard diagnostics, component replacement, and operating system installation.Key ResponsibilitiesDiagnose and repair laptops and desktop computers from various brands, including HP, Dell, Lenovo, Acer, Asus, and Apple MacBook.Perform hardware troubleshooting, including motherboard faults, power issues, charging problems, overheating, and display issues.Diagnose motherboard-level faults and perform component-level repairs wherever technically feasible.Replace laptop screens, keyboards, batteries, hinges, DC jacks, RAM, SSDs, and other hardware components.Perform RAM and SSD upgrades, operating system installation, driver installation, and software troubleshooting.Diagnose booting issues, BIOS/UEFI problems, BSOD errors, and system performance issues.Perform preventive maintenance, internal cleaning, thermal paste replacement, and overheating-related repairs.Maintain accurate job sheets, diagnosis reports, repair status, and parts consumption records.Communicate technical issues, repair estimates, and turnaround times clearly to the team and customers.Handle customer devices, accessories, data, and confidential information responsibly.Follow company SOPs, quality standards, and service warranty policies.Maintain an organized and clean repair workstation.Required Technical SkillsPractical knowledge of laptop and desktop hardware.Experience in laptop disassembly and reassembly.Understanding of motherboard circuits, power rails, and basic electronic components.Knowledge of BIOS programming and troubleshooting is an advantage.Experience with Windows installation, drivers, software troubleshooting, and data backup.Ability to use a multimeter and other diagnostic tools.Knowledge of MacBook repair, chip-level troubleshooting, and schematic/boardview tools is an added advantage.Eligibility CriteriaITI, Diploma, or relevant technical training preferred; candidates with strong practical experience may also apply.1-3 years of hands-on laptop repair experience preferred.Strong troubleshooting and problem-solving skills.Honest, punctual, disciplined, and willing to learn.Ability to work independently and within a technical team.Performance ExpectationsAccurate diagnosis and minimal repeat repairs.Timely completion of assigned service jobs.Proper documentation of diagnosis, parts used, and repairs performed.Responsible handling of customer devices and company inventory.Compliance with repair quality standards and customer data privacy.

Desicated Safety Supervisor with knowledge of Workplace Safety Procedures, Hazard identification, risk Assessment, and accident prevention, Experienced in Monitoring site ACtivities relates to Plumbing and fire- fighting works, ensuring compliance with safety regulations, Conducting toolbox talks, inspecting PPE, And maintaining safety records. Committed to Promoting a safe Working environment and preventing workplace accidents.

Key Responsibilities & SkillsMinimum 2-3 years of experience in Salesforce Administration and L2 Application/System Support.Hands-on experience with Salesforce (SFDC) is mandatory.Strong understanding of Salesforce data models, with hands-on experience in Reports and Dashboards for data analysis.Ability to understand and analyze business logic and requirements.Experience managing Salesforce users, data, profiles, permissions, and security.Strong troubleshooting and problem-solving skills, especially in L2 support environments.Ability to analyze and resolve complex application issues quickly with strong attention to detail.Hands-on experience with Data Loader and other Salesforce data management tools.Good verbal and written communication skills.Anaplan exposure is a plus / good to have.

We are seeking a CMM Engineer with 1 to 4 years of experience to join our team in Chakan, Pune. The ideal candidate holds a graduate degree and is skilled in measuring and ensuring the quality of components using CMM (Coordinate Measuring Machine) technology.Key Responsibilities:- CMM Programming: You will create and modify measurement programs to evaluate product dimensions and tolerances accurately. A strong understanding of CMM software is crucial for this task.- Measurement and Inspection: Conduct detailed inspections of parts and assemblies to ensure they meet specified requirements. This includes analyzing measurement data and reporting findings.- Calibration of Equipment: Regularly calibrate CMM machines and other measuring instruments to maintain accuracy and comply with quality standards. Your attention to detail will help ensure all equipment is functioning correctly.- Data Analysis and Reporting: Analyze measurement results, document findings, and prepare detailed reports that inform engineering and production teams. Effective communication of results is key to continuous improvement.- Collaboration: Work closely with cross-functional teams to resolve quality issues and implement corrective actions based on measurement results. Your ability to work well with others will enhance overall product quality.Required Skills and Expectations:Candidates should have strong analytical skills, with proficiency in CMM programming and software. Good problem-solving abilities and attention to detail are essential. A collaborative mindset and effective communication skills will help you thrive in our team-oriented environment. Only male candidates are eligible for this position.

As a CCTV Engineer, you will be responsible for the installation and servicing of CCTV systems. This role requires hands-on technical skills and the ability to work independently in a full-time office environment in Surat, India.Key responsibilities include:- Installing various types of CCTV systems to meet client specifications, ensuring proper alignment and functionality.- Conducting regular maintenance and troubleshooting of existing CCTV installations to guarantee optimal performance.- Traveling to different job sites, requiring a valid driving license and the use of your own bike for transport.- Maintaining accurate records of installations and service reports for effective client communication.Required skills and expectations:- A minimum of 1 year of experience in CCTV installation and service is mandatory.- Applicants must have at least completed their education up to the 10th grade.- Candidates should demonstrate technical proficiency with CCTV equipment and systems.- Strong problem-solving skills and the ability to work in a team are essential for success in this role.- As this position involves fieldwork, physical fitness and the ability to travel frequently are important.This position is predominantly office-based with a work-from-office requirement, allowing for consistent interaction with colleagues and clients.

Required QualificationsBachelor's Degree in Computer Science, Information Technology, Electronics, or a related field.Basic knowledge of Windows/Linux operating systems.Understanding of networking concepts such as TCP/IP, DNS, DHCP, and LAN/WAN.Familiarity with hardware troubleshooting and system administration.Strong analytical and problem-solving skills.Good verbal and written communication skills.

Job SummarynnWe are looking for an Embedded Systems Engineer to design, develop, test, and maintain embedded hardware and firmware solutions. The candidate should have a good understanding of C programming, microcontrollers, electronic circuits, communication protocols, and hardware-software integration.nnRequired Skills and Expectations:nDevelop and test embedded firmware using C/C++.nWork with microcontrollers such as PIC, AVR, ARM, STM32, or ESP32.nInterface sensors, displays, motors, relays, and communication modules.nConfigure peripherals such as GPIO, ADC, PWM, timers, and interrupts.nImplement communication protocols including UART, IC, SPI, and CAN.

Key ResponsibilitiesPerform hydraulic surge (transient) analysis for Sewage (SWG), Storm Water Drainage (SWD), Irrigation (IRR), and Fire Fighting (FF) systems. Apply strong technical knowledge of hydraulics to model and evaluate transient conditions across pipeline and pumping networks. Analyze and solve for maximum and minimum transient pressures across a range of system configurations. Perform analysis for critical transient scenarios, including power failure/pump trip, pump start followed by stop, and valve closure events. Perform pump head calculations to support system design and analysis. Select surge protection devices effectively and efficiently, sizing them to resolve transient pressures in line with AWWA standards, Hydraulic Institution and project-specific requirements. Select suitable protection devices based on analysis results and system behavior. Read and interpret project inputs such as layout plans, P&IDs, profile drawings, and technical datasheets. Deliver clear, accurate technical reports as per project requirements and timelines. Monitor and guide junior engineers, reviewing their work and providing technical direction. Communicate, collaborate, and coordinate effectively with internal team members and client associates. Apply strong problem-solving and analytical skills to resolve complex hydraulic design challenges independently. Proficiency in Bentley Water HAMMER, Bentley WaterGEMS, and AutoCAD.

ELV Engineer - CoimbatoreExperience: 2-5 yearsSystems: Fire Alarm, CCTV, Access Control, PA/BGM, Networking - focus is on fire alarm and PA systemResponsibilities: Installation, testing, commissioning, troubleshooting, site coordination and documentationQualification: Diploma/B.E./B.Tech - ECE/EEE/Electronics/Electrical or equivalentLocation: CoimbatoreJoining: Immediate / within 15 days

Qualification: Diploma / B.E. / B.Tech in Mechanical or Electrical EngineeringIndustry: Real Estate / ConstructionJob Summary:We are looking for an experienced MEPF Engineer to supervise and coordinate Mechanical, Electrical, Plumbing & Firefighting works at project sites. The role involves site execution, contractor/consultant coordination, drawing & BOQ review, quality inspection, testing & commissioning, and ensuring timely completion of MEPF works.Key Responsibilities:Supervise MEPF site execution and installationsReview drawings, BOQs and technical specificationsCoordinate with contractors, consultants, architects and site teamsMonitor HVAC, electrical, plumbing and firefighting worksConduct site inspections and resolve technical issuesCheck material quality and contractor workAssist in quantity estimation and bill verificationPrepare DPRs and maintain project documentationEnsure safety, quality and project timelinesRequirements: 2-8 years of relevant MEPF site-execution experience Real estate/construction project experience Knowledge of HVAC, Electrical, Plumbing & Firefighting AutoCAD & MS Excel knowledge Good site coordination and communication skills

# Hiring: Field Engineer / Desktop Support EngineerCompany: Swaroop IT SolutionsLocation: Pune, MaharashtraJob Type: Full-time On-siteExperience: Fresher or up to 6 months### About the JobSwaroop IT Solutions is looking for a motivated and technically skilled Field Engineer / Desktop Support Engineer to join our team.This is a full-time field-based opportunity for candidates who have completed a Hardware & Networking course or have basic IT support knowledge.### Required Skills* Basic Computer / Laptop Hardware Knowledge* Desktop / Laptop Formatting and Windows Installation* Software Installation and Troubleshooting* Basic Networking Knowledge* LAN Cable Crimping and Network Troubleshooting* Printer Installation and Basic Troubleshooting* Basic Router / Switch Knowledge* CCTV / DVR Basic Knowledge is an added advantage### Job Responsibilities* Visit customer offices / sites for IT support.* Handle computer, laptop, printer and networking-related issues.* Perform hardware and software troubleshooting.* Provide on-site technical support to customers.* Travel to customer locations as required.### Salary & Benefits* Salary: 9,000 per month* Travelling Allowance: Separate, as per company policy* Opportunity to learn and grow in the IT support field.### Who Can Apply?* Freshers with Hardware & Networking knowledge* Candidates with up to 6 months of relevant experience* Candidates willing to work in the field* Candidates with good communication and troubleshooting skillsInterested candidates can share their resume. Contact: 9021864013Company: Swaroop IT Solutions

Full Stack Product EngineerExperience: 7-12 YearsLocation: BangaloreWe are hiring a Full Stack Product Engineer to design, develop, and deliver scalable product features across frontend and backend systems.Key ResponsibilitiesDevelop end-to-end product features across frontend and backend.Build scalable web applications and REST APIs.Work with product, design, and engineering teams on new features.Design database structures and optimize application performance.Write clean, maintainable, and testable code.Participate in architecture, code reviews, testing, and deployments.Troubleshoot production issues and drive continuous product improvements.Relevant SkillsFull Stack Development, React.js, Angular, JavaScript, TypeScript, Node.js, Python, Java, REST API, Microservices, SQL, MongoDB, AWS, Docker, Git, CI/CD, System Design

Manual Testing Engineer Experience: 6-9 YearsLocation: BangaloreHiring Company: Talent Zone ConsultantBrief JD:We are hiring a Manual Testing Engineer with strong experience in software testing, test case design, defect management and end-to-end application validation. The role involves ensuring application quality, functionality and reliability across releases.Key ResponsibilitiesCreate and execute detailed test cases and test scenarios.Perform functional, regression, integration and system testing.Identify, document and track defects using JIRA or similar tools.Review requirements and prepare test plans.Perform API and database validation where required.Collaborate with developers, BA and product teams to resolve defects.Conduct UAT support and release validation.Prepare test reports and maintain testing documentation.Ensure quality standards are followed throughout the SDLC.Relevant SkillsetManual Testing, Functional Testing, Regression Testing, System Testing, Integration Testing, Test Case Design, Test Planning, Defect Management, JIRA, API Testing, SQL, UAT, SDLC, STLC, Agile

Service Engineer - Automation Industrial AutomationExperience: 6-9 YearsLocation: PuneHiring Company: Talent Zone ConsultantBrief JD:We are hiring a Service Engineer - Automation with strong experience in industrial automation equipment and control systems. The role involves installation, commissioning, troubleshooting, preventive maintenance and providing technical support to customers at site.Key Responsibilities:Install, commission and service automation systems.Troubleshoot PLC, HMI, VFD, servo and control system issues.Conduct preventive and corrective maintenance.Provide onsite technical support and resolve customer issues.Coordinate with engineering and project teams.Prepare service reports and technical documentation.Travel to customer sites as required.Relevant Skillset:Industrial Automation, Service Engineering, PLC, HMI, VFD, Servo, SCADA, Sensors, Control Systems, Electrical Troubleshooting, Installation, Commissioning, Preventive Maintenance, Field Service, Customer Support

Key ResponsibilitiesAssist in the installation, commissioning, and testing of equipment at customer sites.Perform preventive and corrective maintenance activities.Diagnose technical issues and support troubleshooting efforts.Attend service calls and provide timely resolution to customer concerns.Prepare service reports and maintain accurate documentation of work performed.Coordinate with senior engineers and technical teams for complex repairs.Ensure compliance with safety standards and company procedures.Provide basic user training and operational guidance to customers.Maintain tools, equipment, and spare parts inventory.Support warranty claim processing and service record management.

As a Field Maintenance Engineer, you will play a crucial role in ensuring the smooth operation of equipment and systems in various locations. Your primary responsibilities will include:- Conducting Routine Maintenance: You will perform regular maintenance checks on machinery and equipment to prevent malfunctions and ensure optimal performance. - Troubleshooting Issues: When problems arise, you will identify and analyze the root cause of the issues to find effective solutions quickly.- Repairing Equipment: You will be responsible for repairing faulty equipment, which may involve replacing parts, fixing electrical systems, or recalibrating machinery.- Documenting Work: It's essential to keep detailed records of repairs, maintenance schedules, and any parts used, as this helps in future troubleshooting and planning.- Customer Interaction: You will communicate with clients to understand their needs and provide technical support, ensuring they are satisfied with the service provided.- Staying Updated on Technology: You will keep yourself informed about the latest tools and technologies in the field to improve efficiency and service quality.To excel in this role, you should have a solid background in mechanical or electrical systems. Good problem-solving skills are crucial, along with the ability to work independently and as part of a team. Effective communication is essential for interacting with clients and team members. A strong attention to detail will ensure that tasks are completed accurately and safely.

Key ResponsibilitiesPrepare quantity estimations based on drawings, BOQs, and project specifications.Assist in the preparation and submission of client and contractor bills.Verify quantities executed at site and maintain measurement records.Prepare rate analysis for project items and variations.Support cost estimation for tenders, quotations, and project proposals.Maintain billing records, work progress reports, and project documentation.Coordinate with site engineers and project teams for quantity verification.Monitor project progress against billing milestones.Assist in preparing monthly billing and cost reports.Ensure compliance with contract terms and project requirements.Support reconciliation of quantities, materials, and project costs.Assist during audits and project documentation reviews.

We are seeking a Quality Assurance Quality Control Engineer to ensure our products meet the highest standards of quality. The ideal candidate will have 4 to 10 years of experience and a relevant degree, with a strong focus on maintaining quality in manufacturing processes.Key Responsibilities:1. Quality Testing: Conduct thorough testing of products to identify any defects or issues, ensuring they meet the required specifications before release.2. Documentation: Maintain detailed records of testing processes, results, and quality control activities for compliance and review purposes. 3. Process Improvement: Analyze quality control data and collaborate with production teams to identify areas for improvement, thus enhancing overall product quality.4. Standards Compliance: Ensure that manufacturing processes comply with industry standards and regulations, keeping up-to-date with changes in quality standards.5. Training and Support: Provide training and support to team members on quality control processes and best practices, fostering a culture of quality within the organization.Required Skills and Expectations:Candidates should possess strong analytical skills to identify issues and solutions, with attention to detail being crucial. Good communication skills are needed to convey quality expectations clearly to teams. Candidates must be collaborative, willing to work as part of a team to achieve common quality goals. A solid understanding of quality assurance methodologies and tools is essential for success in this role.

NOTE - CNC VMC MAHINE SHOP QUALITY EXPERIENCE - We are looking for a dedicated Senior Quality Engineer to join our team in Chakan Pune. The ideal candidate will have 4 to 7 years of experience in quality engineering and a strong educational background in engineering. This full-time position requires a male candidate who will work from the office.Key Responsibilities:1. Quality Assurance Planning: Develop and implement quality assurance plans to ensure product compliance with industry standards and customer requirements.2. Process Improvement: Analyze current manufacturing processes to identify areas for improvement and work on solutions to increase efficiency and quality.3. Testing and Validation: Design and conduct thorough testing procedures for products, ensuring they meet predefined specifications and function properly.4. Data Analysis and Reporting: Gather, analyze, and interpret quality data, preparing reports to communicate findings and recommend actions to enhance quality.5. Collaboration: Work closely with cross-functional teams, including production, engineering, and supply chain, to resolve quality issues and implement corrective actions.Required Skills and Expectations:The ideal candidate should have a strong background in quality engineering, with hands-on experience in quality control processes, tools, and methodologies. They must possess excellent analytical skills and attention to detail. Strong communication skills are essential for effectively collaborating with various teams. A proactive and problem-solving mindset is expected to drive improvements and maintain high-quality standards. A graduate degree in engineering is required for this role.