Design & Estimation Engineer Jobs in India

Job Title: Design & Estimation EngineerCompany: Matrix Green Enterprise Pvt. Ltd.Location: Ahmedabad, GujaratQualification: B.E. in Electrical EngineeringResponsibilities:Prepare electrical design and estimation for solar and control panels (ACDB/DCDB/Power Panels).Create detailed drawings and layouts using AutoCAD.Evaluate technical specifications, materials, and project requirements.Coordinate with the production and sales teams for technical support and costing.Ensure compliance with electrical standards and safety regulations.Requirements:Proficiency in AutoCAD (Panel Design).Strong understanding of electrical schematics and panel wiring.Good communication and analytical skills.Experience in solar or electrical panel manufacturing preferred.

We are looking for a Design & Estimation Engineer with 3 to 5 years of experience to join our team in Shivane. This role requires a dedicated male candidate with a Bachelors degree in Engineering.**Key Responsibilities:**- **Design Development:** Create detailed engineering designs for projects, ensuring they meet client specifications and technical standards.- **Cost Estimation:** Analyze project requirements and prepare accurate cost estimates for materials, labor, and other resources to ensure budget adherence.- **Technical Analysis:** Review and assess project designs, identifying potential challenges and proposing effective solutions to enhance efficiency.- **Collaboration:** Work closely with project managers, architects, and contractors to align design and estimation processes and facilitate smooth project execution.- **Compliance Assurance:** Ensure all designs comply with industry regulations and company policies, maintaining high quality and safety standards.- **Documentation Management:** Maintain organized project documentation, including design sketches and estimation reports, for easy access and review.**Required Skills and Expectations:**The ideal candidate should possess strong technical skills in engineering design and estimation processes. They must demonstrate proficiency in design software and tools commonly used in the industry. Attention to detail is essential, as accuracy in cost estimation directly impacts project success. Good communication skills are necessary to effectively collaborate with team members and clients. The candidate should be proactive, able to manage multiple tasks simultaneously, and work well under deadlines to contribute positively to the teams performance.

The Design Estimation Engineer is responsible for accurately estimating design projects within the engineering field. Key responsibilities include analyzing project specifications, creating cost estimates, developing design plans, and collaborating with the engineering team. The ideal candidate should have a strong background in engineering, proficiency in design software, attention to detail, and excellent communication skills. The candidate should also be able to work independently and meet project deadlines efficiently.

We are looking for a Senior Highway Engineer with 10 to 15 years of experience to join our team in Kozhikode/Calicut, India. This role involves planning, designing, and overseeing highway projects to ensure safety and efficiency.Key Responsibilities:1. **Project Design and Management**: You will lead the design of highway systems and manage the development process from initial planning through to project completion, ensuring all work meets legal and safety standards.2. **Technical Analysis**: Conduct thorough analyses of project specifications, environmental impact, and traffic patterns to develop effective highway solutions.3. **Team Leadership**: Mentor and supervise junior engineers and technical staff, providing guidance and support to help deliver projects on time and within budget.4. **Stakeholder Collaboration**: Work closely with government agencies, contractors, and other stakeholders to ensure all project requirements are fulfilled and establish strong working relationships.5. **Quality Control**: Implement quality control processes to maintain high standards throughout the project lifecycle, addressing any issues promptly.Required Skills and Expectations:We expect candidates to have a strong educational background in civil engineering, with specialized knowledge in highway engineering. You should possess excellent project management skills and the ability to work collaboratively in a team environment. Strong problem-solving abilities and proficiency in relevant software tools are essential. Effective communication and leadership skills are crucial, as youll be guiding teams and liaising with various stakeholders throughout the project.

Job DescriptionJob Title: Estimation Engineer Lighting/Electrical DesignLocation: Lower Parel, MumbaiJob Overview:KTBS is seeking a detail-oriented and technically skilled Estimation Engineer with a strong background in lighting and electrical design. The ideal candidate will be responsible for preparing accurate estimates and BOQs for commercial, residential, and infrastructure lighting/electrical projects, working closely with the design, procurement, and project teams.Key Responsibilities: Analyze and interpret architectural, electrical, and lighting design drawings and specifications. Prepare detailed cost estimates, BOQs, and tender documentation for lighting and electrical systems. Evaluate material take-offs and labor requirements for various project scopes. Liaise with vendors and suppliers to obtain accurate pricing and lead times. Assist the design team with value engineering, cost optimization, and design validation. Coordinate with project managers to understand project timelines and budgetary requirements. Maintain and update internal estimation tools, price databases, and cost control systems. Participate in technical meetings, pre-bid discussions, and client presentations when needed.Requirements: Bachelors/Diploma degree in Electrical Engineering or related field. 2+years of experience in estimation, preferably in lighting or electrical project environments. Proficiency in reading and interpreting electrical schematics, design layouts, and AutoCAD drawings. Strong knowledge of lighting controls, electrical standards (such as IS/IEC/NBC), and wiring systems. Hands-on experience with MS Excel, AutoCAD, and estimation software (e.g., Bluebeam, CCS Candy, etc.). Excellent numerical skills, attention to detail, and a methodical approach to estimation. Strong communication and coordination skills.Preferred: Experience with lighting design tools like Dialux/Relux is a plus. Exposure to large-scale commercial or hospitality projects.What We Offer: Competitive salary and incentives. Opportunity to work on high-end lighting and electrical design projects. A dynamic and collaborative team environment. Career growth and skill development support.

As an Electrical Design & Estimation Engineer, your responsibilities will include:- Developing electrical systems design concepts and solutions for projects- Creating detailed design drawings and specifications- Estimating project costs for labor, materials, and equipment- Working closely with clients, contractors, and vendors to ensure project requirements are met- Conducting site visits and surveys to assess project needs and constraints- Ensuring all electrical systems meet industry standards and regulations- Providing technical support during construction and commissioning phases

Sr. Rotating Equipments Engineer BE Mechanical with 08 to 15 years experience in the engineering of projects in the field Oil and Gas / Refinery/Power industry Experience in selection of rotating equipment and process package units including but not limited to pumps, compressors, blowers, agitators, turbines, expanders, centrifuges, dryers, refrigeration package, cooling towers, boilers, nitrogen plant, ETP, incinerators, power plants as per National and International codes and standardsLead the team in improving overall quality while optimizing the time and cost elements.Specific calculation techniques, material requisitions, inspection & testing, vendor drawingsP&ID Comprehension, structural design & calculation, equipment cost estimationChecking of Vendor Drawings/documentsManpower planning, progress monitoring, Manhours planningCo-ordination with other disciplines and vendor/client.Contact: Ms. Madhuri Meshram 9820500760 Apply now to drive innovation in Oil & Gas projects!#CivilEngineering #StructuralEngineering #OilAndGas

pharma equipments, process equipments, estimation engineer, pharma lab equipments

1. Scope of work-Design Requirements2. Preparation of DBR (Design Basis Report).3. Load Calculation and assessment of actual demand, maximum demand, rating of transformer, DG, UPS & Inverter as per requirement4. Discussion with Architect for the Planning of Electrical room, HT Metering room, Substation & shafts etc.5. Design & Detailing single line diagram of HT Panel, LT Panels & Distribution Boards6. Earthing System calculations based on soil resistivity report & preparing earthing & lightning arrester layouts As per NBC & IEC7. Design of various Layouts such as Cable tray, Bus duct, Power distribution, Lighting, Earthing8. Design of LV System & Delivering the Customize solution for lighting, Fir Alarm, CCTV, Access control, PA system, Power, Raceway Layouts.9. Design of lighting scheme using Dialux software with detail lighting layouts10. Preparing detail BOQ (Bill of Quantity) & Estimate11. Preparing Specification for Various equipments like HT & LT Panel , Transformer, Dg Set, UPS, LT & HT Installation Works12. Floating Tender & Techno commercial Evaluations of received offer from vendors. 13. Inspections of Various Equipments like:-Transformer, HT Panel, LT Panel, DG Set14. Co-ordination & integration with other services like Architecture, HVAC,firefighting, interior etc along with Client & Contractors.15. Shop drawing approvals submitted by contractor16. Support during Execution of project & at the time of Commissioning to Client & Contractors.17.ELV Design & Specifications.

Company DescriptionWe are an ISO 9001:2015 certified company manufacturing control panels in Vadodara, Gujarat, India. The company is managed by a technocrat with more than four decades of experience in India and abroad. 1) Panel Design Engineer (Electrical)Role Description:As a Panel Design Engineer (Electrical), you will play a key role in the design and development of electrical control panels. Your responsibilities will include:Key Responsibilities: Designing electrical control panels in accordance with project specifications, industry standards, and regulatory requirements. Creating detailed panel layouts, schematics, and wiring diagrams using design software such as AutoCAD.Qualifications: Bachelor's degree or diploma in electrical engineering or a related field. Minimum of 2 years of experience in electrical panel design. Proficiency in AutoCAD or similar design software. Strong knowledge of electrical codes, standards, and best practices. Excellent communication and teamwork skills.2) Panel Estimation Engineer (Electrical)Role Description:As a Panel Estimation Engineer (Electrical), you will be responsible for accurately estimating project costs and preparing competitive bids for electrical control panels. Your role will involve:Key Responsibilities: Analyzing project requirements and specifications to determine material and labor costs. Collaborating with vendors and suppliers to obtain competitive pricing for electrical components.Qualifications: Bachelor's degree or diploma in electrical engineering or a related field. Minimum of 2 years of experience in electrical panel estimation. Strong analytical and mathematical skills. Familiarity with industry pricing trends and cost factors.To Apply:Send your CV and Portfolio to: ashish@indianswitchgears.com

DESINING OF FIRE PROTECTION SYSTEM AS PER TAC/NFPA/OISD. AUTOCAD/HYDRAULLIC CALCULATION (PIPE NET), PREFERRED

Position: Sr Design Engineer Civil - Water ResourceWork Location- BangaloreRole:Candidate should be a Goal oriented person and will be able to work in TeamsAs a key member of water resources team, you will be responsible for the execution of water resources projects, prepare reports and support management with the tenders as required.COMPETENCIES:Experience with the design and Estimation of water management systems, culverts, bridges, Check dams, Barrages, Cannals, Lake and Park development and repair, Tourism Development Lift Irrigation System, open channel systems, Water retaining structure and Restoration and Rejuvenation of Surface water bodies.Sound technical knowledge, especially in water resources engineering (Hydrology and Hydraulic concepts).Experience in design of water supply systems and allied networks. Working knowledge and understanding of Indian design codes and standards.Knowledge of Site Survey Topo survey & Geotechnical SurveyFluent in software of ARCGIS Desktop /ArcGISPro/ ERDAS/ ENVI/ IDRISI, QGIS and Google Earth ProShould be strong in GIS and Remote Sensing concepts (Digitization/editing, Geo-referencing, Reformatting, Map-projections, Soil Type Classification, Image Resampling techniques, Vector - Raster conversions, Topology checking, Cartography, Geodatabases, Image Classification/Analysis, Processing Satellite/Aerial/Lidar datasets.Analyze, validate, and present results using spreadsheets, charts and maps.Willingness to learn and apply new technologies, strategies, and theories is crucial. Open-minded and receptive to feedback and suggestion. the applicant must be self-motivated.SOFTWARE/SKILLSComputer-aided design CAD software - Autodesk AutoCADMap creation software - ESRI ArcGIS software; MapInfoOffice suite software - Microsoft Office.QUALIFICATIONBE/B. Tech degree in Civil Engineering from a reputed institute. ME/ M. Tech in Environmental/Water resource would be key deciding factorIndividual should

1. Preparation of Cost Estimation & design of LT Panel, Motor Starters, AMF Panel, APFC Panel & PLCPanel.2. Rating & selection of various equipment like PLC, SCADA, Soft Starter, VFD, Circuit breakers &Capacitor Bank etc.3. Preparation of Documents (QAP, GA Drawing, SLD, Power Diagram, Control Diagram, Bill of Material,& I/O List).

Hiring for 1 Project Sales Engineer Job in Delhi,Dehradun, with minimum 1 Year Experience,Required Educational Qualification is : Diploma with Good knowledge in Heat Load Calculation,Estimation,BOQ Preparation,Tendering,Hvac Engineer,Hvac Design,Auto CAD Operator etc.

B.E Chemical/Mechanical/Environmental Engineer with exp in related field . Design, Process and cost estimation of WTP/ETP/STP Projects and components . Vendor development and coordination. prepare techno-commercial proposal of offered system. Auto cad knowledge will be preferred.

1. Study of process parameters thoroughly2. Design of the equipment as per standards (ASME, TEMA)3. Cost price estimation of the equipment as per design planned4. Meeting with the client and understanding and clearing their technical requirements5. Preparation of technical offer as per standards6. Preparation of Bill of Materials and Bill of Quantity as per design7. Co ordination with purchase for the costing of materials (Raw material, Consumables, Flanges, Labor)7. Co ordination with purchase for the costing of materials (Raw material, Consumables, Flanges, Labor)9. Standardize the estimation sheet for the fellow subordinates so that the costing stays inline with the design parameters

Job Title: Design & Estimation EngineerCompany: Matrix Green Enterprise Pvt. Ltd.Location: Ahmedabad, GujaratQualification: B.E. in Electrical EngineeringResponsibilities:Prepare electrical design and estimation for solar and control panels (ACDB/DCDB/Power Panels).Create detailed drawings and layouts using AutoCAD.Evaluate technical specifications, materials, and project requirements.Coordinate with the production and sales teams for technical support and costing.Ensure compliance with electrical standards and safety regulations.Requirements:Proficiency in AutoCAD (Panel Design).Strong understanding of electrical schematics and panel wiring.Good communication and analytical skills.Experience in solar or electrical panel manufacturing preferred.