Testing & Commissioning Engineer Jobs

We are looking for a Testing Engineer to join our team in Hathijan. In this role, you will ensure that our products and software meet high-quality standards through thorough testing and analysis.Key Responsibilities:- **Test Planning:** Develop test plans based on project requirements to define the scope and objectives of the testing process.- **Test Design:** Create detailed and well-structured test cases that cover all functionalities of the software to ensure comprehensive testing.- **Test Execution:** Carry out manual and automated tests to identify defects and verify that software functions as intended.- **Defect Reporting:** Document and report any defects found during testing, providing clear descriptions to help developers address the issues effectively.- **Collaboration:** Work closely with development teams to understand the product features and provide feedback during different stages of the project.- **Test Environment Setup:** Prepare and maintain the test environments necessary for executing tests efficiently.- **Continuous Improvement:** Suggest improvements in testing processes and tools to enhance efficiency and effectiveness.Required Skills and Expectations:- A diploma in a relevant field is required.- 1 to 3 years of experience in software testing, demonstrating a solid understanding of testing principles.- Familiarity with manual and automated testing tools and methodologies.- Strong analytical and problem-solving skills to identify issues and provide solutions.- Effective communication skills to report findings clearly and work collaboratively with the team.- Attention to detail to ensure quality in every aspect of testing and documentation.

The Design Engineer Electrical will design electrical systems and drawings to support engineering and manufacturing requirements.Key Responsibilities:Prepare electrical schematics and wiring diagrams.Support panel design and system integration.Coordinate with mechanical and production teams.Assist in testing and commissioning activities.Maintain electrical design documentation.Required Skills & Qualifications:BE in Electrical Engineering with 24 years of experience.Hands-on experience in electrical design tools.Good understanding of electrical standards.

Detailed Job DescriptionJob Title: Relay Engineer Protection, Testing & CommissioningExperience: 5+ Years (Strong field experience mandatory)Employment Type: Full-Time PermanentWork Mode: Remote Base + Extensive Field Work (Pan India Travel)Location: Pan India (Candidates can be based anywhere in India)Compensation: Attractive Salary Package (Best in industry for the right profile)About the RoleWe are seeking a highly experienced Relay Engineer with deep hands-on expertise in protection systems, relay testing, commissioning, troubleshooting, and switchyard operations. This role demands extensive site-based field execution across multiple locations in India, covering substations, switchyards, power plants, and industrial electrical installations.The engineer will be responsible for end-to-end protection scheme validation, relay configuration, field troubleshooting, commissioning activities, and final handover to clients.Key ResponsibilitiesTesting, commissioning, and troubleshooting of protection relays.Configuration, testing, and logic modification of:Schneider Easergy P3Micom (P643)Siemens Siprotec 5 / 7SD82 seriesLine & transformer:Differential protectionREF protectionStability checksIn-zone & out-zone verificationProgrammable logic testing & modifications on protection relays.ATS logic, momentary parallel logic checking, troubleshooting & correction.Upstream & downstream interlock and interconnection verification.CT, PT, VC, VCB, ACB witness testing and analysis of abnormal readings.VCB breaker mechanism troubleshooting and plug-pin replacement.LTMR Tesys-T relay configuration, logic modification, and commissioning.Motor auto-reacceleration scheme implementation and validation.Switchgear installation verification and corrective recommendations.Site acceptance testing (SAT), pre-commissioning, commissioning & handover.Coordination with site engineers, OEMs, EPC contractors & utility clients.Required Skills & ExpertiseStrong knowledge of protection & control schemes.Expertise in:Transformer protectionLine protectionBusbar protectionSwitchyard protectionIn-depth experience with Schneider, Siemens & Micom relays.Excellent field troubleshooting and problem-solving ability.Ability to independently execute complete commissioning projects.

Job Title: Testing EngineerOverviewWe are looking for a dedicated and technically skilled Testing Engineer to join our dynamic team in Ahmedabad, Gujarat.This role involves testing, commissioning, and maintenance of electrical and protection systems used in substations, switchgear, transformers, and industrial power networks - both in India and abroad.________________________________________Key Responsibilities- Execute testing and commissioning of protection relays, switchgear panels, transformers, and control systems.- Perform primary and secondary injection relay testing using advanced test kits (OMICRON, Megger, ISA, etc.).- Carry out specialized tests including Tan Delta, Contact Resistance Measurement (CRM), Breaker Timing, CT/PT testing, and HV/LV/HT panel verification.- Analyze and optimize relay coordination, logic, and protection settings as per design requirements.- Prepare and review detailed test reports and documentation.- Provide technical support and troubleshooting during commissioning and site operations.- Collaborate with project and field teams to ensure smooth and timely project execution.- Ensure adherence to safety, quality, and compliance standards during all testing activities.________________________________________Job Skill Requirements1. Education: Minimum Diploma in Electrical Engineers, Instrumentation, or Electronics & Telecommunication (ETC).2. Experience: Freshers with a strong technical background or minimum 1 year of experience in testing & commissioning, relay testing, or power system protection.3. Travel: Must be willing to travel extensively - up to 75% of the time - for site work within Pan India.4. Domain Exposure: Preference for candidates with experience or interest in substation testing, relay coordination, or electrical commissioning projects.5. Gender Requirement: Only male candidates are eligible for this position.________________________________________Required Qualifications & Skills- B.E./B.Tech or Diploma in Electrical Engineer / Electronics / Instrumentation / Power Systems Engineering.- Hands-on experience with OMICRON, Megger, ISA, SCOPE, or Crest testing kits.- Familiarity with Tan Delta, CRM, Breaker Timing, CT/PT, HV/LV Testing.- Strong understanding of relay protection schemes and power system components.- Knowledge of protection logic, coordination, and panel wiring diagrams.- Excellent analytical, problem-solving, and communication skills.- Self-motivated with the ability to work independently under minimal supervision.________________________________________Preferred Skills- Experience in Relay Testing Engineers, relay coordination, or HV panel testing.- Knowledge of electrical safety practices and system protection standards.- Ability to handle multiple testing projects efficiently under tight schedules.________________________________________ Location: Ahmedabad, Gujarat Travel: Pan India Contact: +91 76000 96674________________________________________

Were Hiring! Role: Testing & Commissioning / Relay Testing Engineer Company: NS Engineers Office Location: Ahmedabad, Gujarat (with site travel) Work Location: Pan India About the Role Join our power-system experts and work on cutting-edge testing & commissioning projects for substations, switchgear and industrial networks. Key Responsibilities Conduct testing & commissioning of protection relays, switchgear panels, transformers and control systems. Perform primary & secondary injection relay testing with OMICRON, Megger and other advanced kits. Execute specialised tests: Tan Delta, CRM, Breaker Timing, CT/PT, HV/LV & HT panel testing. Optimise relay coordination, settings and protection logic; prepare detailed test reports. Commission HV panels & substation automation; provide on-site technical support. Ensure full compliance with safety and quality standards. What Were Looking For Education: B.E./B.Tech in Electrical Engineering Experience: Minimum 6 Month (ideal 03 years) in testing & commissioning / power-system protection Core Skills Tan Delta, CRM, Breaker Timing, Isolator, CT/PT testing Insulation Resistance Test (IR Test) Winding Resistance Test Turns Ratio Test (TTR Test) Magnetizing Current Test BDV (Breakdown Voltage) Test of Transformer Oil Vector Group Test Polarity and Phase Relation Test Load and Temperature Rise Test Relay coordination & protection logic HV panel commissioning HT/LV/Switchgear & Transformer testing ISA / SCOPE / Crest kits OMICRON Test Universe Substation automation Soft Skills Strong problem-solving ability Clear communication Teamwork mindset Willingness to travel Ready to power up your career? Send your CV to hr1@nsengineers.co.in Contact: 7600057502 Subject: Relay Testing Engineer NS Engineers

- Key Responsibilities:1. Design and develop electrical systems: The engineer will be responsible for designing and developing electrical systems for various projects, ensuring they meet industry standards and client requirements.2. Conduct testing and troubleshooting: They will conduct testing on electrical systems to ensure functionality and troubleshoot any issues that may arise during the testing phase.3. Prepare technical reports and documentation: The engineer will be required to prepare technical reports documenting the design process, testing results, and any modifications made to the electrical systems.4. Collaborate with team members: They will collaborate with other team members, including project managers and other engineers, to ensure projects are completed on time and within budget.- Required Skills and Expectations:1. Strong knowledge of electrical engineering principles: The candidate should have a solid understanding of electrical engineering principles and how they apply to real-world projects.2. Proficiency in AutoCAD and other design software: Experience with AutoCAD and other design software is essential for this role to create detailed electrical designs.3. Good communication skills: The engineer should have good communication skills to effectively collaborate with team members and communicate technical information to non-technical stakeholders.4. Ability to work independently and in a team: The candidate should be able to work independently on tasks assigned to them while also being a team player and collaborating with other team members effectively.

1. Supervise and execute HVAC installation work as per design drawings and project specifications.2. Coordinate with clients, consultants, and internal teams to ensure smooth project execution.3. Manage site activities including ducting, piping, insulation, and equipment installation.4. Ensure timely availability of manpower, materials, and tools at the site.5. Conduct site inspections and ensure compliance with quality and safety standards.6. Support testing, balancing, and commissioning of HVAC systems.7. Prepare and maintain site reports, progress updates, and daily work logs.8. Identify and resolve technical issues and report deviations to the Project Manager.9. Assist in quantity estimation and material reconciliation for ongoing projects.10. Required Qualifications and Skills:11. Education: Diploma / B.E. / B.Tech in Mechanical Engineering.12. Experience: 2 4 years of experience in HVAC project execution or site supervision.13. Strong understanding of HVAC systems, drawings, and installation procedures.14. Ability to read and interpret mechanical drawings and technical specifications.15. Good communication and team coordination skills.16. Knowledge of project planning, material handling, and safety protocols.17. Proficient in MS Office (Excel, Word) and basic AutoCAD

Retrofitting relay, testing of transformer and potential transformer, air circuit breakers and vacuum circuit breakers electrical test to ensure their proper operation and safety.

o Perform site-specific testing and commissioning of electrical equipment, including transformers, switchgear, circuit breakers, protection relays, bus bars, cables, and more.o Execute tests for both Low Tension (LT) and High Tension (HT) equipment in compliance with national and international standards.o Coordinate and supervise electrical pre-commissioning, commissioning, and start-up activities for power plants and substations.

Job Title: Commissioning Engineer Effluent Treatment Plant (ETP)Department: Operations & MaintenanceLocation: Anywhere in India Job Purpose:To ensure smooth commissioning, operation, and maintenance of Effluent Treatment Plants (ETPs), ensuring treated water meets environmental standards. The role involves on-site coordination, chemical handling, troubleshooting, and client interaction for successful handover and continued performance.Key Responsibilities:1.. Commissioning Activities:Conduct pre-commissioning checks, flushing, testing, and trial runs.Execute system start-up, monitor parameters, and stabilize operations.2. Operational Management:Operate the plant as per standard procedures and ensure compliance with environmental norms.Record daily operational parameters like flow, pH, COD, BOD, TSS, etc.Maintain chemical dosing systems and ensure chemical stock levels.3. Maintenance & Troubleshooting:Perform preventive and breakdown maintenance of mechanical/electrical/chemical systems.Identify and resolve operational issues and report major faults.Key Skills Required:Knowledge of wastewater treatment processes (physical, chemical, biological).Familiarity with lab instruments and chemical analysis techniques.Hands-on experience in ETP start-up, troubleshooting, and O&M.Qualifications:Education: Diploma / B.Sc / M.Sc in Chemistry / Environmental Science / Industrial Chemistry / Chemical Engineering or related field.

Job Purpose:To provide expert-level testing, commissioning, maintenance, and service support for transformers, ensuring optimal performance and compliance with industry standards.Key Responsibilities:Testing & Diagnostics:Conduct electrical tests such as insulation resistance, winding resistance, transformer turns ratio (TTR), and vector group tests.Perform advanced diagnostic tests, including Tan Delta, Partial Discharge (PD), and Sweep Frequency Response Analysis (SFRA).Analyze test results and provide recommendations for corrective actions.Commissioning:Supervise the installation and commissioning of transformers at project sites.Execute functional and performance tests in compliance with IEC and IEEE standards.Ensure seamless integration of transformers into the power grid.Service & Maintenance:Perform on-site troubleshooting and fault diagnosis for transformers.Undertake repairs, retrofitting, and preventive maintenance activities.Replace defective components and ensure restored operational efficiency.Technical Documentation:Prepare test reports, commissioning logs, and service records.Maintain documentation for regulatory compliance and client reference.Client Support:Provide technical support to clients during and post-project implementation.Train client teams on proper operation and maintenance of transformers.Safety & Compliance:Adhere to safety protocols and quality assurance standards during testing and commissioning.Conduct risk assessments and ensure workplace safety.Key Skills:Expertise in transformer testing, commissioning, and servicing processes.Proficiency in handling equipment like TTR meters, SFRA analyzers, and Tan Delta testers.Strong problem-solving and analytical skills.In-depth knowledge of industry standards such as IEC 60076 and IEEE C57.

We required testing & commissioning engineer, please apply who is willing to travel across PAN India.

A test engineer's role is to ensure that a product meets specifications and quality standards by designing, executing, and analyzing tests: Test design: Create test plans, scripts, and scenarios to test a product's functionality, performance, security, and regression Test execution: Perform tests according to strict criteria and controls Test analysis: Analyze test data to identify defects, strengths, and opportunities for improvement Test reporting: Write up reports on test results and communicate them to stakeholders Test troubleshooting: Work with developers to identify and fix errors Test process improvement: Provide feedback and suggestions to improve the testing process and software development Test quality assurance: Ensure the product meets quality standards and monitor safety measures Test liaison: Act as a liaison between manufacturing, design, sales, and marketing Test documentation: Record all testing procedures and results Test automation: Create automated systems for regular check-ups Test engineers may also need to stay updated on the latest testing tools, techniques, and methodologies.

B.E./ BTECH In Electrical 8 years hands-on experience in Testing & pre-commissioning works in package substation & primary substation and associated equipment. Knowledge in testing CT's, PT's, meters, power transformers & other auxiliary equipment's of substation like battery & battery charges.

Requirement Fire Alarm Testing Commissioning Engineer of Should have Minimum 3 Year Experience

Assembly of electronic Testing and Measuring Instruments & Calibration

Prepare Develop detailed BIM models for ELV systems (IBMS, FDAS, Control System, PLC, VESDA etc.), security (ACS, CCTV, PA, Boom Barrier etc.), communication and data networks.Understand and develop Schematic Drawings, System Architecture, and layouts of ELV Systems, Block Diagram, Cable, Cable Tray, and Conduit layout based on received calculations,Have experience in working in field for building management system installation and commissioning.Perform clash detection and resolve clashes related to ELV elements.Generate construction BIM Model and support the creation of as-built Models.Collaborate with project teams to meet project deliverables and deadlines.Stay updated on industry trends and advancements in BIM technology and methodologies related to ELV systems.Follow company/project BIM standards, templates, and best practices.Assist in quality control processes and provide guidance to junior team members, if applicable.

Hiring for 3 Testing Jobs in Mumbai, Hyderabad - Testing Engineer with minimum 1 Year Experience,Required Educational Qualification is : Diploma, Advanced/Higher Diploma, Professional Degree with Good knowledge in Technical Communicator,Service Engineer,Computer Operator etc.

We are urgently hiring Scala Developer for company located at Mohali having Work from Home/Hybrid (for Mohali)/Work from officeCompany OverviewWe are a highly talented & experienced team of IT solution providers based in the UK and with offshore offices in India. Company exists to meet the growing demands of IT services that are bespoke to individual client challenges.Over the past decade, we have built a strong track record of success by delivering more than 500 projects to clients around the world.Job OverviewScala Developer role with 4-6 years of experience.Employment type: Full-Time, Remote, Hybrid or Work from OfficeQualifications and Skills4-6 years of experience as a Scala DeveloperProficiency in Scala programming and related frameworks like AkkaExperience with REST APIs and Agile methodologiesStrong knowledge of testing/unit testing tools like JUnit/MockitoFamiliarity with cloud-based environments (AWS, Azure)Hands-on experience with Kafka and ElasticsearchRoles and ResponsibilitiesStrong scala programming skills and experience with Scala frameworks such as Akka is must.Efficient in designing and developing REST APIs.Experience with SQL and NoSQL databases.Proficiency in software design patterns and principles.Experience with version control tools such as Git.Good understanding of Agile methodologies and a collaborative mindset.Excellent problem- solving and analytical skills.Experience in unit testing (eg. JUnit/ Mockito).Experience in cloud- based environments such as AWS or Azure.Experience with Kafka and Elasticsearch.

Need Freshers with EEE background for Testing and Commissioning oriented Projects

Seeking Freshers with Pan India work Interested. Travel and Stay Accommodations Provided. Background with Electrical. It will Onsite Work

PROTECTION RELAY ENGINEER POWER SYSTEM PROTECTION EXPERT A skilled Protection Relay Engineer plays a vital role in ensuring power system reliability, safety, and fast fault clearance across substations and industrial power networks. Key Skills & Expertise Relay Testing & Commissioning (Numerical / Static / Electromechanical) Distance, Differential, Overcurrent & Earth Fault Protection Transformer, Generator & Motor Protection Relay Configuration, Setting & Coordination Secondary Injection Testing (OMICRON / FREJA / MEGGER) CT / PT Testing & Verification SCADA & Substation Automation Fault Analysis & Troubleshooting Commissioning: 11kV / 33kV / 66kV / 132kV & Above Preventive & Breakdown Maintenance Industries Served Power Transmission & Distribution Substations & Switchyards Renewable Energy (Solar / Wind) Industrial Utilities WhatsApp & Calling: 76000 96674 Website: www.powertest.in

Company DescriptionPowertest Solutions is proud to introduce the AMT 205, a cutting-edge Multifunctional Relay testing kit, specially manufactured in India to support the Make in India initiative. Designed to test a wide range of sub-station equipment such as power transformers, current transformers, potential transformers, circuit breakers, and more, the AMT 205 offers high precision and versatility. Featuring multiple current and voltage sources, analog binary inputs and outputs, and comprehensive testing capabilities, our product ensures reliability and accuracy. We provide a 3-year warranty and 24/7 support, setting us apart in the industry and dedicated to enhancing your electrical equipment testing experience.Role DescriptionThis is a full-time remote role for a Protection Relay Engineer. The Protection Relay Engineer will be responsible for conducting tests and maintenance on sub-station equipment using the AMT 205 testing kit. Tasks include analyzing and troubleshooting protection relay systems, preparing test reports, ensuring compliance with industry standards, and providing technical support to clients. The engineer will collaborate closely with team members to improve testing procedures and solve complex issues effectively.QualificationsKnowledge in testing and maintaining protection relays and sub-station equipmentExperience with troubleshooting, analyzing, and resolving technical issues related to electrical testingStrong understanding of industry standards and regulatory compliance for electrical testingAbility to prepare detailed technical reports and documentation of testing resultsEffective communication skills for providing technical support and collaborating with team membersBachelor's degree in Electrical Engineering or a related fieldExperience with AMT 205 or similar relay testing kits is a plusProficiency in using related software and testing toolsAbility to work independently and remotely, managing multiple tasks efficiently

We are seeking a highly skilled and experienced Electrical Engineer or Electrical Project Manager to oversee electrical installation and commissioning works across our project locations. The ideal candidate will have a strong background in handling electrical systems for construction or industrial projects, with proven experience in MEP-focused roles. The position requires hands-on supervision, technical knowledge, and the ability to coordinate across various teams to ensure timely and quality project execution. The candidate must possess strong team leadership capabilities to manage and guide site engineers, technicians, and support staff throughout project lifecycles.Key Responsibilities:Lead and manage a team of engineers, supervisors, and site staff to effectively execute all electrical works on site.Ensure the team performs assigned responsibilities with a focus on quality, safety, and timely delivery.Supervise the installation, testing, and commissioning of key power infrastructure including transformers, HT/LT panels, DG sets, and substation components.Conduct erection of double-pole structures and transformer substations in accordance with site requirements.Oversee underground and overhead cable laying activities in alignment with approved project drawings while accommodating site-specific conditions.Manage reconductoring and replacement of HT/LT lines, installation of new double pole structures, and erection of spun poles.Inspect and supervise all cable termination and identification work to ensure quality and accuracy across internal and external wiring systems.Ensure effective communication and collaboration between engineering teams, site staff, and management to maintain smooth workflow and resolve issues promptly.Qualifications and Experience:Bachelors Degree in Electrical Engineering or a related field.Minimum of 10 years of relevant experience in electrical installation, testing, andcommissioning within construction or industrial environments.M.Tech in Electrical Engineering is preferable but not mandatory.Proven ability to lead and manage teams in a project execution environment.Strong knowledge of MEP systems, site execution practices, and electrical safety standards.Demonstrated leadership, attention to detail, and ability to manage multiple tasks while working closely with cross-functional teams.

We're seeking an experienced Installation Engineer to oversee the installation of electrical DC and AC systems for our solar plant projects. The ideal candidate will have 3-5 years ofexperience in solar plant installation and will be responsible for ensuring the successful execution of electrical systems.Key Responsibilities: Install and commission electrical DC and AC systems, including:- MMS (Mounting Structures) and module installation- Inverter and transformer installation- 33 kV transmission line (TL) and bay work- SEM (Substation Equipment Management) and electrical equipment installation Ensure compliance with electrical safety standards and company policies Troubleshoot and resolve installation issuesCollaborate with project teams to ensure project timelines are metConduct quality checks to ensure installation meets specificationsRequirements: 3-5 years of experience in solar plant installation, with a focus on electrical DC and AC systems Strong knowledge of electrical engineering principles and solar plant designExperience with electrical installation, including MMS, inverters, and transformersExcellent problem-solving and communication skills Ability to work at heights and in outdoor environmentsPreferred Skills: Experience with solar plant installation software and tools Knowledge of relevant safety regulations and standards, such as IEC and IEEEExperience with testing and commissioning of electrical systems Strong attention to detail and quality focus

We are seeking a highly skilled and experienced Electrical Engineer to oversee electrical installation and commissioning works across our project locations. The ideal candidate will have a strong background in handling electrical systems for construction or industrial projects, with proven experience in MEP-focused roles. The position requires hands-on supervision, technical knowledge, and the ability to coordinate across various teams to ensure timely and quality project execution.Key Responsibilities:Supervise the installation, testing, and commissioning of key power infrastructure including transformers, HT/LT panels, DG sets, and substation components.Conduct erection of double-pole structures and transformer substations in accordance with site requirements.Oversee underground and overhead cable laying activities in alignment with approved project drawings while accommodating site-specific conditions.Manage reconductoring and replacement of HT/LT lines, installation of new double pole structures, and erection of spun poles.Inspect and supervise all cable termination and identification work to ensure quality and accuracy across internal and external wiring systems.Qualifications and Experience:Bachelors Degree in Electrical Engineering or a related field.Minimum of 5 years of relevant experience in electrical installation, testing, and commissioning within construction or industrial environments.Strong knowledge of MEP systems, site execution practices, and electrical safety standards.Demonstrated leadership, attention to detail, and ability to manage multiple tasks while working closely with cross-functional teams.