Plumbing System Jobs

Assemble, install, maintain, and pressure test all pipes, fittings, and fixtures of fuel dispensers,submersibles (UGT), water heaters, drainage, water tanks, UGT and air-conditioned systems accordingto specifications and plumbing codes.Adhered to safety procedures while dealing with hazardous material.Following engineering drawings, schematics, blueprints, safety procedures, standards, and technicalmanuals to accomplish assigned tasks.Use hand tools, electrofusion welding machines, cuttings and different Plumbing instruments.Install, maintain and repair piping systems (Fuel, Vent, Unloading) using all pipe types (Galvanized steel,PVC,PP-R,PP-RCT,HDPE)Ability to estimate and select materials.

Job SummaryWe are seeking an experienced and skilled Plumber with 4-8 years of experience in the installation of HVAC and domestic hot water systems including chillers, heat pumps, calorifiers, plate heat exchangers and associated piping networks. The candidate shall be responsible for carrying out site installation activities in accordance with project drawings, specifications, quality standards and safety requirements.Key ResponsibilitiesCarry out installation works for chilled water, condenser water and domestic hot water piping systems.Execute installation activities related to chillers, heat pumps, calorifiers, plate heat exchangers, storage tanks and associated equipment.Install and assemble piping systems using:MS (Mild Steel) PipesHPVC PipesPPR PipesCopper Pipes (if required)Install and align pumps, valves and accessories as per approved shop drawings.Install various types of valves including:Butterfly ValvesGate ValvesBall ValvesCheck ValvesBalancing ValvesPressure Reducing Valves (PRVs)Differential Pressure Regulating Valves (DRVs)Control Valves and Actuated ValvesPerform cutting, threading, grooving and joining of piping systems using appropriate tools and equipment.Install pipe supports, hangers, brackets and anchors as per project requirements.Read and interpret piping layouts, isometric drawings and shop drawings.Coordinate with supervisors, engineers and other trades to ensure smooth execution of works.Conduct pressure testing, flushing and commissioning support activities.Identify and report installation issues, material shortages and site constraints.Ensure work is completed within project schedules while maintaining quality standards.Maintain proper housekeeping and ensure compliance with site safety regulations and permit requirements.Required Qualifications and SkillsMinimum 4-8 years of experience in plumbing and HVAC installation works.Proven experience in installation of chillers, heat pumps, calorifiers and hot water generation systems.Strong knowledge of MS, HPVC and PPR piping installation techniques.Experience in installation of DRVs, balancing valves and control valves.Ability to read and understand engineering drawings and P&ID diagrams.Familiarity with hydrostatic pressure testing and flushing procedures.Ability to work independently and under the direction of site supervisors.Good understanding of safe working practices and use of PPE.UAE/GCC experience will be an added advantage.Preferred ExperienceDistrict cooling systems.Domestic hot water systems.Heat pump water heating systems.Chilled water and condenser water systems.Hotel, commercial and industrial HVAC projects.Physical RequirementsAbility to work in construction environments and outdoor conditions.Ability to lift and handle piping materials, valves and equipment safely.Ability to work at heights and in confined spaces when required.Employment TypeFull Time

A Plumbing Supervisor leads a team of plumbers and technicians. They plan, schedule, and oversee daily installations, maintenance, and repairs. They ensure all work meets safety standards, complies with building codes, and stays within project budgets and timelines.B Experience: Typically requires a minimum of 5 years of hands-on plumbing experience and 1-3 years in a leadership or supervisory role.

Plumbing work at under construction site,high rise building at all over in pune & pimpri chinchwad.need also core cutting machine operator

We are looking for a Multi Skill Technician to join our team in Chennai. In this role, you will perform various technical tasks related to maintenance and repair. The ideal candidate will have 1 to 3 years of experience and hold an I.T.I. diploma. **Key Responsibilities:**- **Maintenance of Equipment:** Regularly inspect and maintain equipment to ensure it is running efficiently and safely.- **Repair Work:** Troubleshoot and repair mechanical and electrical issues to minimize downtime and maintain operational effectiveness.- **Installation Tasks:** Assist with the installation of new machinery, ensuring compliance with safety standards and procedures.- **Documentation:** Keep accurate records of maintenance activities, repairs, and inventory of parts and materials used.- **Coordination with Teams:** Work closely with other team members and departments to support various operational needs and ensure smooth workflow.**Required Skills and Expectations:**Candidates must have a solid technical background and should be able to handle multiple tasks effectively. Strong problem-solving skills are essential, as is the ability to work both independently and as part of a team. Attention to detail is crucial to ensure high-quality work. Good communication skills will help in coordinating with other staff and reporting any issues clearly. A valid I.T.I. certification is required, and preference will be given to candidates with experience in both mechanical and electrical systems. Being adaptable to new challenges is also important in this role.

Plumbing works in an Apartment with multistoried apartment containing12 blocks and each block consists of 48 Flats on a 3 storeyed building in Premier GruhalakshmiApartment, S M Road, Jalahalli West,Bangalore 560015

We are looking for an experienced plumber to install, maintain and repair sanitation units, water and gas supply lines, heating systems, and associated fixtures and appliances in residential, commercial, and industrial structures. You will also be required to design and inspect plumbing systems, perform diagnostics, and ensure they comply with regulatory codes.To be successful as a plumber you should be able to work independently and solve problems as quickly and efficiently as possible. To excel in this position you should have strong technical skills, be a master at troubleshooting and enjoy dealing with people.Plumber Responsibilities:Reading and interpreting blueprints to assess or plan plumbing installations and layouts.Installing, maintaining and repairing plumbing systems and fixtures.Fitting and repairing various household appliances.Cutting, welding and assembling pipes, tubes, fittings, and fixtures.Inspecting and testing plumbing systems for safety, functionality, and code compliance.Handling customer queries and responding to call outs.Troubleshooting and resolving problems.Preparing cost estimates.Plumber Requirements:Trade school diploma or completed apprenticeship.1+ years of experience as a plumber.Valid plumbing license.Good working knowledge of water supply, heating, and ventilation systems.

Senior Plumbing & Fire Fighting Draughtsman Requirement - 1 Experience Required 7+ yrs. Opening for senior profile Job Description : Internal Toilet Layout. External sanitary Layout. Terrace Rain Water down take Layout. Strom water drain Layout. Internal Toilet water supply Layout. Terrace Floor water supply layout. Water supply Schematic. Drainage schematic. MEP shaft schedule Layout. Pump room Detail. Underground Tank Detail. Over Head Tank Detail. Tank sleeve Detail. different types of tanks layout, details and sections like under ground, over head and auxiliary tank etc. Space Planning of Plumbing & Fire Fighting System Requirements. Preparing Water Supply & Drainage Schematics. Preparing Water Supply & Drainage Layouts. Preparing Water Tank Layout ,Section & Sleeve Details. Preparing Sprinkler Layout ,Fire Hydrant layouts. Preparing Co-Ordinated layouts. Preparing External Services layouts. ( SWD, SEWER, WATER & FF ) Preparing Builders Working layouts Preparation of Drawing for Plumbing And Fire Fighting. Internal Plumbing Design Including- Soil , Waste Drainage, Water Supply & Rain Water disposal to external. External Sewage and Storm Water Drainage Layout, Water supply Bore well Interconnecting to UG Tank. Installation of Sprinkler system, Hydrant System, Fire extinguisher system, Hose Reels System. Preparation of Schematic Diagram of Plumbing and Fire Fighting Services. Preparation of Water Demand for Residential and Commercial Building. Co-ordinate MEP Drawing. Details Design of Underground Water Tank & Overhead Water tank. Plumbing, Fire Fighting Quantity Take of.

who has working experience in office interior projects, knowledge of Auto cad, qualification degree or diploma in civil. knowledge of HVAC, fire Alarm, access control, electrica; works. two wheelar con veyance is must.

We nWe need site engineerQualificationsDiploma or BE mechnical1 to 2 years experience or freshers also can aplyLocation puneBike compulsorySkill and responsibilities1. Site Engineer knows about work, its drawing & BOQ.2. Site Engineer explains daily work activity to Workmen.3. Site Engineer communicates effectively to both Management, Client, Workmen on field.4. Preparing Schedule of Material Used and Available.5. Onsite material requirement posts before one day advance.6. Monitoring & evaluating the progress of work.7. Time management at when site job demand lot of tasks plan properly.8. Site engineers have a passion for solving problems and understanding the new things.9. Report properly to management team on Daily basis in report format.10. Daily Housekeeping after work completion.Do you need a summary of these responsibilities or specific details about any of them?Mail id -admin@hydropneu.inWe need site engineerQualificationsDiploma or BE mechnical1 to 2 years experience or freshers also can aplyLocation puneBike compulsorySkill and responsibilities1. Site Engineer knows about work, its drawing & BOQ.2. Site Engineer explains daily work activity to Workmen.3. Site Engineer communicates effectively to both Management, Client, Workmen on field.4. Preparing Schedule of Material Used and Available.5. Onsite material requirement posts before one day advance.6. Monitoring & evaluating the progress of work.7. Time management at when site job demand lot of tasks plan properly.8. Site engineers have a passion for solving problems and understanding the new things.9. Report properly to management team on Daily basis in report format.10. Daily Housekeeping after work completion.Do you need a summary of these responsibilities or specific details about any of them?Mail id -admin@hydropneu.inWe need site engineerQualificationsDiploma or BE mechnical1 to 2 years experience or freshers also can aplyLocation puneBike compulsorySkill and responsibilities1. Site Engineer knows about work, its drawing & BOQ.2. Site Engineer explains daily work activity to Workmen.3. Site Engineer communicates effectively to both Management, Client, Workmen on field.4. Preparing Schedule of Material Used and Available.5. Onsite material requirement posts before one day advance.6. Monitoring & evaluating the progress of work.7. Time management at when site job demand lot of tasks plan properly.8. Site engineers have a passion for solving problems and understanding the new things.9. Report properly to management team on Daily basis in report format.10. Daily Housekeeping after work completion.Do you need a summary of these responsibilities or specific details about any of them?Mail id -admin@hydropneu.ineed site engineer8788893045

Designing all plumbing & fire fighting drawings like UGT, OHT, PLUMBING & FIRE FIGHTING INTERNAL AND EXTERNAL DRAWINGS, SCHEMATIC, PREPARING CALCULATIONS LIKE WATER DMEAND, SOLAR, RAIN WATER HARVESTING ETC, HANDLE PROJECT LIKE RESIDENTIAL, BUNGALOWS, COMMERCIAL BUILDINGS, HOTEL ETC

We are looking for a Multi Skill Technician to join our team in Hyderabad, India. The ideal candidate should have 1-5 years of experience and hold an I.T.I. certification. As a Multi Skill Technician, you will be responsible for performing a variety of tasks such as electrical, plumbing, carpentry, and HVAC maintenance.Key Responsibilities:- Perform routine maintenance tasks in various areas such as electrical, plumbing, carpentry, and HVAC.Explanation: The Multi Skill Technician will be required to troubleshoot and repair issues in different areas to ensure smooth operations.- Install, repair, and maintain machinery and equipment.Explanation: The candidate will be responsible for ensuring all machinery and equipment are in working condition by performing regular maintenance and repairs.- Respond to service calls and resolve maintenance issues promptly.Explanation: The technician will need to address any maintenance issues that arise efficiently to minimize downtime and disruptions.Required Skills and Expectations:- Strong knowledge and experience in electrical, plumbing, carpentry, and HVAC maintenance.Explanation: The candidate should have a well-rounded skill set in various areas to effectively perform maintenance tasks.- Ability to work independently and prioritize tasks.Explanation: The candidate should be able to work autonomously and manage their workload efficiently to meet maintenance requirements.- Excellent problem-solving skills and attention to detail.Explanation: The Multi Skill Technician should be able to identify issues quickly and find effective solutions while paying close attention to detail.

Perform routine plumbing maintenance, repairs and installations Handle general handyman tasks including minor electrical, mechanical and carpentry work Inspect and troubleshoot plumbing systems to ensure smooth facility operations Support preventive maintenance and emergency repair activities