ITI Job Vacancies in Kolkata

Job SummaryThe Avionics Engineer is responsible for the design, development, testing, installation, and maintenance of aircraft electronic systems. This role ensures safe, efficient, and compliant operation of avionics equipment including communication, navigation, surveillance, and flight control systems. The engineer works closely with cross-functional teams to support system integration, troubleshooting, upgrades, and continuous improvement in aviation technology. Key ResponsibilitiesDesign & Development:Design, develop, and integrate avionics systems for aircraft and aerospace applications.Create system schematics, wiring diagrams, and interface control documents.Develop embedded software or hardware for avionics components.Testing & Troubleshooting:Conduct system testing, validation, calibration, and verification to ensure performance standards.Diagnose issues in avionics equipment using testing tools and propose corrective actions.Perform root cause analysis for system failures and implement preventive measures.Installation & Integration:Oversee installation and configuration of avionics systems in aircraft.Ensure seamless integration of avionics with electrical, mechanical, and flight control systems.Coordinate with manufacturing, maintenance, and flight operations teams for system implementation.Compliance & Documentation:Ensure compliance with aviation authorities (FAA, EASA, DGCA) and safety standards.Prepare technical reports, maintenance manuals, and certification documentation.Maintain accurate documentation of design changes, test results, and system configuration.Maintenance & Support:Support maintenance teams in periodic inspections, upgrades, repairs, and system checks.Provide engineering support for aircraft modifications, retrofits, and new product introductions. Required Skills & CompetenciesTechnical Skills:Strong knowledge of communication, navigation, surveillance, autopilot, and flight control systems.Expertise in embedded systems, digital/analog electronics, and circuit design.Hands-on experience with avionics protocols (e.g., ARINC 429, MIL-STD-1553, CAN bus).Proficiency in tools such as MATLAB/Simulink, LabVIEW, PSPICE, Altium, Xilinx, or similar.Knowledge of aviation standards DO-178C, DO-254, RTCA, FAA/EASA guidelines.Soft Skills:Analytical and problem-solving ability with strong attention to detail.Effective communication, teamwork, documentation, and time-management skills.Ability to work under pressure and meet strict deadlines. Education & Experience RequirementsBachelors degree in Avionics Engineering, Aerospace Engineering, Electronics & Communication, Electrical Engineering, or related field.(Preferred) Masters degree in Avionics or related specialization.Experience:Entry Level: 02 yearsMid-Level: 37 yearsSenior: 8+ years in avionics engineering or related aerospace domain Work EnvironmentMay require working in aircraft hangars, manufacturing facilities, laboratories, or test sites.Willingness to travel for project support, testing, and system installation.Must adhere to aviation safety regulations and workplace safety protocols. Job Type & CompensationFull-time / PermanentCompetitive salary based on experience and qualificationsBenefits: Health insurance, travel allowance, training & professional development

This is a leading bus operator with a fleet of over 100 Volvo, Scania, and Tata buses, is looking to recruit skilled technicians. We are seeking assistance in sourcing suitable candidates for the following positions to support our ongoing operations and ensure the highest standards of maintenance and service:**Head Technicians*** Requirements: Strong diagnostic and repair skills, preferably with experience in Volvo and Tata buses.10 years minimum.The salary would be based on the experience and expertise

Urgent requirementPost - 200+Location - Pune (Mharashtra)For Fresher's candidates onlyQualification - Diploma and B.tech (Electrical)Salary - 19 to 25k (stipend)Duity hour- 8hrRoom and mess facilities available (Chargeable)Gender - MaleInterested candidates Apply on

An Electrical Engineer is responsible for designing, developing, and testing electrical systems and equipment. They also oversee the installation and maintenance of electrical systems in buildings, aircraft, and other structures. Responsibilities of an Electrical Engineer may include:- Designing electrical systems and components- Testing and evaluating electrical systems- Troubleshooting and repairing electrical issues- Ensuring compliance with safety standards and regulations- Collaborating with other engineers and professionals on projects- Providing technical support and guidance to team members

Responsibilities:1. Providing technical advice regarding design, construction, or program modifications and structural repairs.2. Managing and overseeing construction projects from start to finish.3. Ensuring that projects are completed within budget and on time.4. Conducting regular site visits to monitor progress and quality of work.5. Collaborating with architects and other professionals to ensure that projects meet specifications.6. Ensuring compliance with safety regulations and quality standards.

FitterVacancy - 4 ( 2 senior and 2 junior )Experience- senior -10- 12 years , junior- 7-10 yearsSalary- senior - 7.5 to 8.5 LPA /junior - 5-6.5 LPAJob Summary:We are seeking a highly skilled and experienced Industrial Fitter to join our maintenance team. Theideal candidate should have a minimum of 10 years of experience in mechanical maintenance work,specifically in a metal manufacturing environment. The role involves installation, repair, andmaintenance of industrial equipment, including pumps, motors, valves, furnaces, burners, and othermachinery.Key Responsibilities:- Perform routine and preventive maintenance on industrial equipment to ensure smoothoperations.- Diagnose mechanical faults and carry out timely repairs on pumps, motors, valves, furnaces,burners, and other factory machinery.- Dismantle and assemble mechanical components for maintenance, repair, and replacement.- Inspect, test, and troubleshoot mechanical systems to enhance operational efficiency.- Work with hydraulic, pneumatic, and lubrication systems.- Ensure proper alignment, balancing, and calibration of rotating equipment.- Follow safety procedures and industry standards while handling heavy machinery and tools.- Assist in equipment installation and commissioning.- Maintain accurate records of maintenance and repair activities.- Coordinate with other departments for smooth workflow and minimal downtime.Requirements:- Minimum of 10 years of hands-on experience in mechanical maintenance within a metalmanufacturing facility.- Strong knowledge of pumps, motors, valves, furnaces, burners, and related industrialequipment.- Ability to read and interpret mechanical drawings, blueprints, and manuals.- Experience with welding, cutting, and fabrication is a plus.- Proficiency in using hand tools, power tools, and diagnostic equipment.- Strong problem-solving skills and ability to work under pressure.- Good understanding of workplace safety standards and protocols.- Willingness to work in shifts and respond to emergency breakdown.Contact us HR @9102102367 or 9523023250

Position Summary:The Aeronautical Engineer is responsible for the design, development, testing, and maintenance of aircraft and aerospace systems. The role focuses on improving flight safety, efficiency, and performance while ensuring compliance with aviation standards and regulations. The engineer works closely with design, testing, and manufacturing teams to deliver innovative and reliable aerospace solutions.Key Responsibilities: Design & DevelopmentDesign and develop aircraft components, structures, and systems.Use CAD/CAM software (CATIA, SolidWorks, AutoCAD, etc.) for 2D/3D modeling.Analyze aerodynamic, structural, and propulsion systems to optimize performance.Conduct feasibility studies for new design concepts and prototypes.Collaborate with cross-functional teams on product development and testing. Testing & AnalysisPerform wind tunnel tests, flight simulations, and performance evaluations.Analyze test results to identify design flaws or areas of improvement.Conduct structural and fatigue analysis using tools like ANSYS or MATLAB.Ensure designs meet safety, quality, and regulatory standards (DGCA, FAA, EASA). Production & MaintenanceSupport the manufacturing process by providing technical input and design validation.Assist in maintenance planning, fault diagnosis, and repair of aircraft systems.Evaluate materials and production methods for efficiency and durability. Documentation & CompliancePrepare technical reports, test documentation, and certification papers.Ensure compliance with aviation standards and environmental regulations.Maintain accurate records of design modifications, testing, and approvals. Innovation & ResearchResearch emerging aerospace technologies and materials.Contribute to projects related to UAVs, satellites, or space vehicles.Suggest improvements for existing aircraft systems and components.Skills & Competencies:Strong understanding of aerodynamics, propulsion, and flight mechanicsProficiency in CAD/CAE software (CATIA, ANSYS, MATLAB, SolidWorks)Knowledge of CFD and FEA toolsExcellent problem-solving and analytical skillsGood technical documentation and communication abilitiesTeam collaboration and project management skillsAwareness of aviation safety regulations and standardsQualifications:Education: B.E./B.Tech (M.E./M.Tech preferred)Experience: 05 years (entry-level to mid-level); internship or industry experience preferredCertifications (optional): CATIA, ANSYS, MATLAB, or DGCA-approved trainingWork Environment:Office and lab-based work with occasional visits to test sites or manufacturing unitsCollaboration with design, testing, and maintenance teamsMay involve travel for inspections, trials, or client meetingsJob Titles / Related Roles:Aerospace EngineerAircraft Design EngineerFlight Test EngineerMaintenance Engineer (Aviation)Propulsion Engineer

Position OverviewWe are seeking a proactive and organized Admin HR Executive to support both human resources and administrative operations. The role is responsible for recruitment, employee relations, payroll support, and HR compliance, along with overseeing daily office administration, vendor management, and documentation. The Admin HR professional ensures smooth business operations while fostering a positive work environment.Key ResponsibilitiesHuman Resources (HR)Assist in end-to-end recruitment: job postings, screening, interviews, and onboarding.Maintain employee records, HR databases, and personnel files.Manage attendance, leave records, and payroll inputs.Support employee engagement initiatives, training, and performance reviews.Ensure HR policies and labor law compliance.Handle employee grievances, exit interviews, and full-and-final settlements.AdministrationOversee day-to-day office operations and facility management.Manage vendor relationships (housekeeping, security, travel, supplies).Coordinate meetings, events, and official travel arrangements.Maintain office inventory, procurement, and asset records.Handle correspondence, documentation, and filing (digital & physical).Support senior management with calendar management and scheduling.Required Skills & QualificationsBachelors degree in Human Resources, Business Administration, or related field.Proven experience in HR & administration (13 years for executive level; more for senior roles).Knowledge of HR practices, payroll processes, and labor laws.Proficiency in MS Office (Word, Excel, PowerPoint, Outlook).Familiarity with HR software/HRIS (SAP HR, Zoho People, Workday, etc.).Strong communication and interpersonal skills.Good problem-solving, organizational, and multitasking abilities.High level of integrity, confidentiality, and professionalism.Preferred Skills (Nice to Have)Experience with payroll software (GreytHR, ADP, etc.).Exposure to recruitment tools and ATS platforms.Event coordination and employee engagement activities.Knowledge of basic accounting and petty cash handling.

We have vacant of 42 Urgent Hiring of Aircraft Maintenance at Airports Jobs in Mumbai, Kolkata, Goa, Visakhapatnam, Trivandrum/Thiruvananthapuram, Kozhikode/Calicut, Chennai, Kannur, Mangalore, Surat, for Freshers Educational Qualification : I.T.I., B.C.A, B.B.A, B.E, B.Tech, Other Bachelor Degree, Post Graduate Diploma, M.Tech, Integrated PG, Any Master Degree Skill Aircraft Maintenance, Aeronautical Engineer, Aviation, Aircraft Engineer, Aircraft Maintenance Engineer, Aircraft Technician, Electrical Engineer, Mechanical Engineer, Civil Engineer, Site Engineer, Project Engineer, Avionics etc.

As an Aircraft Maintenance Engineer, your responsibilities will include conducting avionics and structural repairs, performing engine overhauls, troubleshooting aircraft systems, and ensuring the safe and efficient operation of aircraft. You will need to have strong technical ability, safety awareness, and excellent communication skills. Key skills required for this position include analytical thinking, problem-solving abilities, and proficiency with diagnostic equipment. You must also have a thorough understanding of aircraft systems and be able to effectively repair and maintain them.

We are looking for 71 Vacancies for Mechanical and Electrical Engineers at Aviation Industries Posts in Mumbai, Bangalore, Coimbatore, Imphal, Kolkata, Hyderabad, Tiruchirappalli/Trichy, Chennai, Kozhikode/Calicut, Surat, with deep knowledge in Aircraft Maintenance, Electrical Engineer, Mechanical Engineer, Aerospace Engineering, Aeronautical Engineer, Avionics, Aircraft Engineer, Aircraft Maintenance Engineering and Required Educational Qualification is : I.T.I., B.E, B.Tech, Other Bachelor Degree, Post Graduate Diploma, M.Tech, Any Master Degree

We are looking for 27 Jobs for Aircraft Engineer at Aviation Industry Posts in Mumbai, Imphal, Rourkela, Amritsar, Jaipur, Salem, Kolkata, Daman, Jammu, Chandigarh, with deep knowledge in Aircraft Maintenance, Aircraft Engineer, Aircraft Mechanic, Aircraft Technician, Aircraft Supervisor, Aircraft Maintenance Engineer, Aircraft Maintenance Technician, Aircraft Handling, Aircraft Maintenance Engineering, Electrical Engineer, Mechanical Engineer and Required Educational Qualification is : I.T.I., B.Arch, B.C.A, B.B.A, B.E, B.Tech, Other Bachelor Degree, Post Graduate Diploma, M.Tech, Any Master Degree