Inspection Jobs

# JOB DESCRIPTION - HOME INSPECTION EXECUTIVE### PositionHome Inspection Executive / Civil Engineer### Salary16,000 - 20,000 per month### Job LocationField-based / Multiple Project Locations### Job TypeFull-Time### Purpose of the JobThe Home Inspection Executive will be responsible for visiting residential properties and conducting quality inspections to ensure that construction work meets the required quality standards, specifications, and company guidelines.### Key Responsibilities* Conduct on-site inspections of residential homes and construction projects.* Inspect civil and construction work for quality, workmanship, and compliance with required standards.* Identify construction defects, finishing issues, and quality concerns.* Prepare inspection reports and document observations with photographs when required.* Coordinate with site teams and contractors regarding identified issues.* Follow up on corrective actions and ensure quality concerns are addressed.* Travel to different project locations as required.* Maintain accurate records of inspections and submit reports within the required timelines.* Ensure all inspections are conducted professionally and as per company procedures.### Educational Qualification* Diploma / B.E. / B.Tech in Civil Engineering.* Freshers with good technical knowledge may also be considered.### Required Skills & Eligibility* Good understanding of basic civil construction and building quality standards.* Ability to identify construction defects and quality issues.* Good observation and reporting skills.* Good communication and coordination skills.* Willingness to work extensively in the field.* Must have a valid two-wheeler (bike) and a valid driving licence.* Willingness to travel to multiple residential project locations.### Field WorkThis is a primarily field-based role. The candidate will be required to travel to different residential properties and project sites for home inspections.### Company Benefits* Travel expenses will be provided by the company.* Food expenses will be provided by the company.* Opportunity to gain practical experience in residential construction and quality inspection.

Raw material entry and released order. Raw material analysis Prepration of mobile phase. Raw material analysis by titration Volumetric prepration and standardization INSTRUMENT HANDLING Karl fisher UV spectroscopy (simadzu 1900i,1800) FTIR pH meter Disintegration apparatus Friability ,hardness apparatus

We are seeking a motivated and dedicated Graduate Trainee Engineer to join our team in Delhi. This is an excellent opportunity for fresh graduates to kickstart their engineering careers and gain hands-on experience in a dynamic work environment.Key Responsibilities:- Learning and Development: Engage in comprehensive training programs to understand our systems, processes, and products, enhancing your engineering knowledge.- Project Assistance: Collaborate with senior engineers on various projects, helping with design, development, and implementation while gaining practical insights into engineering practices.- Technical Support: Provide assistance in troubleshooting and resolving technical issues, contributing to a smooth workflow and maintaining high-quality standards.- Documentation: Maintain clear records of project activities and results, ensuring effective communication within the team and with other departments.- Continuous Improvement: Participate in brainstorming sessions to suggest process improvements and innovations that enhance efficiency and reduce costs.Required Skills and Expectations:We expect candidates to hold a relevant engineering degree and demonstrate strong analytical skills. Effective communication in both spoken and written forms is essential for collaboration and documentation. A proactive attitude towards learning and problem-solving is vital. Ideal candidates should be able to work well within a team and adapt quickly in a fast-paced environment, demonstrating a commitment to continuous improvement in engineering practices.

Key ResponsibilitiesQuality Assurance & Control (QA/QC)Process Inspection & Auditing: Monitor production processes, assembly lines, and machining stages to ensure compliance with engineering drawings, quality plans, and standard operating procedures (SOPs).Incoming & In-Process Inspection: Oversee raw material inspections, first-article inspections (FAI), in-process checks, and final pre-dispatch quality clearances.Testing & Calibration: Supervise dimensional, metallurgical, and functional testing of components using precision measuring instruments (e.g., Vernier calipers, micrometers, height gauges, CMM). Ensure regular calibration of all measuring equipment.Defect Management & Continuous ImprovementRoot Cause Analysis: Investigate internal rejections, customer complaints, and supplier quality failures using root cause problem-solving methodologies (e.g., 5-Why, Fishbone/Ishikawa diagram, Pareto analysis).Corrective & Preventive Actions (CAPA): Develop, implement, and track effective CAPA plans to eliminate recurring defects and prevent non-conformances.Process Optimization: Collaborate with production, tooling, and engineering teams to optimize manufacturing processes, reduce scrap rates, and improve overall product reliability.Documentation & ComplianceQuality Documentation: Maintain comprehensive quality records, Inspection Reports (IR), Material Test Certificates (MTC), and Process Flow Diagrams.Audits & Standards: Maintain compliance with ISO standards (e.g., ISO 9001, IATF 16949); actively participate in internal and external client/third-party quality audits.

JOB DESCRIPTION - QUALITY CONTROL (QC) MANAGERPosition: Quality Control (QC) ManagerDepartment: QualityLocation: Bahadurgarh/Jhajjar, HaryanaQualification: B.Tech - Mechanical EngineeringExperience: 4-5 YearsSalary: Up to 40,000 CTC per monthFinal Salary: Depending on technical knowledge, relevant experience, and interview performanceIndustry: MS Fabrication / Engineering / ManufacturingJob SummaryWe are looking for an experienced QC Manager with strong practical knowledge of MS fabrication, welding, engineering drawings, inspection and ISO quality systems. The candidate will be responsible for maintaining product quality from incoming material through fabrication, welding, assembly and final inspection.Key Responsibilities Manage day-to-day Quality Control activities on the fabrication/manufacturing shop floor. Inspect MS fabricated components, structures, frames, and welded assemblies. Conduct incoming material, in-process, and final inspections. Ensure fabricated parts comply with approved engineering drawings, dimensions, and tolerances. Monitor welding quality and identify defects such as porosity, undercut, cracks, improper weld size, and distortion. Check fit-up, dimensions, weld size, and overall workmanship. Maintain inspection reports, check sheets and quality records. Raise and manage NCRs (Non-Conformance Reports) and implement corrective/preventive actions. Perform Root Cause Analysis for recurring quality issues. Coordinate with Production, Design, Purchase and Project teams for quality improvements. Ensure measuring and inspection instruments are properly calibrated. Support customer inspections and internal/external quality audits. Maintain quality procedures and documentation according to ISO 9001 Quality Management System requirements. Monitor supplier/vendor quality as required. Reduce rejection, rework, and customer complaints through continuous improvement.Technical Knowledge Required MS fabrication and welded assemblies MIG/MAG and Arc welding inspection Welding symbols and fabrication drawings Engineering drawing interpretation Basic GD&T and dimensional tolerances Vernier calliper, micrometre, height gauge, weld gauge and other inspection instruments Visual welding inspection Raw-material inspection and material identification NCR and CAPA Root Cause Analysis and 5 Why ISO 9001 documentation and audit requirements Calibration and inspection records Basic MS Excel and quality documentationJoining Preference: Immediate or early joiner preferred.

Key Responsibilities1. Implement and monitor safety policies, procedures, and guidelines at the project site.2. Conduct regular site inspections to identify unsafe conditions, potential hazards, and unsafe work practices.3. Ensure the use of appropriate Personal Protective Equipment (PPE) by all employees, contractors, and workers.4. Conduct toolbox talks, safety briefings, and awareness sessions for site personnel.5. Monitor compliance with applicable industrial safety rules, regulations, and company safety standards.6. Prepare and maintain safety documentation, inspection reports, incident reports, and safety registers.7. Assist in risk assessments, Job Safety Analysis (JSA), and Permit-to-Work (PTW) procedures.8. Investigate accidents, near misses, and unsafe incidents and recommend corrective and preventive actions.9. Ensure proper safety arrangements for working at heights, electrical work, lifting operations, and other hazardous activities, wherever applicable.10. Coordinate with project managers, site engineers, contractors, and workers to address safety-related issues.11. Conduct emergency preparedness checks and support fire safety and emergency response activities.12. Ensure timely reporting of safety observations and follow up on corrective actions.

Key Responsibilities1. Conduct Internal Audits as per company procedures and quality standards.2. Handle and coordinate Customer Audits and ensure timely closure of audit observations.3. Maintain and implement ISO 9001 and AS9100 quality system requirements.4. Coordinate internal, customer, and certification audits.5. Prepare, review, and implement SOPs and work instructions.6. Prepare and review Control Plans as per process and customer requirements.7. Handle Internal and Customer Complaints and ensure timely resolution.8. Prepare and monitor Corrective and Preventive Actions (CAPA).9. Perform in-house calibration of measuring and inspection instruments.10. Verify and control calibration records and certificates.11. Maintain Aerospace Customer Records, including job photographs, powder consumption records, process records, and other required documentation.12. Maintain Inspection and Test Records (ITR) and ensure proper traceability.13. Prepare and maintain Certificate of Conformance (COC) as per customer requirements.14. Conduct or coordinate sample metallography and hardness testing and maintain test records.15. Carry out sample inspection as per drawings, specifications, and quality requirements.16. Perform in-process sample inspection at different stages of production.17. Monitor quality during machining, blasting, masking, plasma spraying/coating, grinding, polishing, and packaging processes.18. Inspect incoming, in-process, and finished components using appropriate measuring instruments.19. Review engineering drawings, specifications, inspection standards, and customer requirements.20. Identify quality issues, perform root cause analysis, and coordinate corrective actions with Production.21. Maintain NCR, CAPA, inspection reports, quality records, and other QA documentation.22. Coordinate with Production, QC, Store, Purchase, and other departments for quality-related activities.23. Support continuous improvement activities to reduce rejection, rework, and customer complaints.

Assist with crane and lifting-equipment inspections.Support load testing and functional testing.Take site photographs and maintain inspection records.Assist with inspection reports and equipment documentation.Follow site safety procedures.ITI Mechanical / Fitter or Diploma in Mechanical Engineering.Freshers may apply.Willingness to travel to Bhubaneswar, Cuttack and nearby industrial locations.Two-wheeler preferred.Employment: Part-time / on-callRemuneration: 500-1,000 per site visit, depending on the assignment and candidate's qualification. Travel expenses to be discussed separately.

Job Responsibilities1. In-Process Quality Inspection: Inspect products during production to ensure quality standards.2. Measuring Instruments & Inspection: Use measuring instruments to check product dimensions and specifications.3. Defect Identification & Rejection Control: Identify defects and control rejected products.4. Production Line Monitoring: Monitor production processes and ensure quality compliance.5. Documentation & Reporting: Maintain inspection records and prepare quality reports.6. Quality Coordination: Coordinate with production teams to resolve quality issues

Key ResponsibilitiesSupervise day-to-day site activities and ensure smooth project execution.Monitor work progress and ensure adherence to project timelines.Coordinate with contractors, vendors, consultants, and internal teams.Ensure quality standards are maintained throughout project execution.Monitor manpower deployment and site productivity.Verify material requirements, deliveries, and inventory at the site.Conduct regular site inspections and ensure compliance with safety regulations.Prepare daily, weekly, and monthly progress reports.Resolve site-related issues and coordinate corrective actions.Maintain project documentation, work records, and site reports.Ensure compliance with company policies, project specifications, and statutory requirements.

Supervise daily plant operations and mechanical maintenance activities.Plan and execute preventive, predictive, and breakdown maintenance.Monitor the performance and condition of mechanical equipment.Supervise installation, erection, alignment, testing, and commissioning of equipment.Coordinate fabrication, welding, piping, and equipment maintenance activities as applicable.Manage technicians, operators, and contract manpower at the plant or project site.Read and interpret mechanical drawings, P&IDs, and equipment layouts.Ensure compliance with safety procedures, PPE requirements, and Permit-to-Work (PTW) systems.Coordinate with production, maintenance, quality, procurement, and project teams.Maintain daily reports, equipment maintenance records, inspection reports, and spare-parts records.Identify equipment failures, perform root cause analysis, and implement corrective actions.Monitor downtime, equipment reliability, work progress, and maintenance costs.Ensure compliance with quality standards, housekeeping, and company procedures.interested candidate can contact us on : 7623888872

Supervise daily reactor operations and chemical production activities as per approved SOPs.Monitor reactor temperature, pressure, agitation, reaction time, and other process parameters.Ensure correct raw material identification, weighing, charging, and batch processing.Coordinate batch manufacturing activities to achieve daily production targets.Monitor reaction progress and report process deviations to the concerned engineer or production manager.Ensure proper reactor start-up, shutdown, cleaning, and readiness for the next batch.Coordinate filtration, drying, material transfer, and packing operations wherever applicable.Maintain batch manufacturing records, production logs, shift reports, and material consumption records.Ensure compliance with quality specifications and coordinate with the Quality Control (QC) department for sampling and testing.interested candidate can contact us on:- 7623888872

Key Responsibilities1. Receive, issue, and maintain records of raw materials, consumables, and finished goods.2. Update stock entries in Google sheets, Excel and maintain accurate inventory records.3. Perform daily stock verification and support monthly physical inventory.4. Prepare GRN, MRN and other store-related documents.5. Follow FIFO system and ensure proper material storage.6. Coordinate with Production, Purchase for smooth material flow.7. Maintain cleanliness, safety, and 5S standards in the store.8. Assist in material planning and timely replenishment of stock.Required Skills & Qualifications Graduate in any discipline. 1-3 years of experience in a manufacturing/engineering store. Knowledge of Zoho,Horizon, MS Excel, Tally (preferred). Good communication and documentation skills. Strong organizational skills and attention to detail.Benefits PF & ESIC Paid Leave Career Growth Opportunities Friendly Working Environment