Inspection Job Vacancies in Vadodara

ABOUT A LEADING GUJARAT CONGLOMERATEA Leading Gujarat Conglomerate is a growing manufacturer of Copper Clad Laminates (CCL), serving the PCB and electronics industry. We are building a world-class manufacturing setup with a focus on quality, process discipline, and operational excellence.ROLE OVERVIEWThe Plant Head will have end-to-end ownership of the CCL manufacturing facility - from raw material intake through finished laminate output. This is a critical leadership role responsible for production targets, yield improvement, cost management, and team development.KEY RESPONSIBILITIESProduction & Operations- Own and deliver monthly/quarterly production targets across all laminate grades- Drive yield improvement programs and reduce scrap/rework across the press, treater, and slitting lines- Monitor cost-per-sheet and identify levers to reduce manufacturing cost without compromising quality- Implement and sustain 5S, Kaizen, and lean manufacturing practices on the shop floorProcess & Equipment Oversight- Oversee operation of hydraulic multi-daylight presses, treater lines, and thermal systems- Ensure optimal functioning of oil heaters, boilers, and associated thermal infrastructure- Drive a culture of preventive maintenance - reduce unplanned downtime and improve OEE- Collaborate with maintenance and engineering teams to manage planned shutdowns and upgradesPeople & Cross-Functional Leadership- Lead production, maintenance, quality, and engineering teams across shifts- Set KPIs, conduct performance reviews, and develop frontline supervisors and engineers- Coordinate with procurement for raw material planning (resin, glass fabric, copper foil)- Work with sales and quality on customer complaints, NCRs, and corrective actionsCompliance & Safety- Ensure adherence to factory safety norms, environmental regulations, and statutory compliance- Maintain all plant records, daily production logs, and MIS reports for management reviewCANDIDATE PROFILEExperience- 3-10+ years of experience in CCL, PCB, composites, or laminates manufacturing- Proven track record of managing multi-line production facilities- Prior experience in a plant leadership or operations head role preferredTechnical Knowledge- Working knowledge of hydraulic press systems and hot press lamination cycles- Understanding of thermal energy systems - oil heaters, boilers, heat exchangers- Familiarity with resin systems (epoxy, FR-4), impregnation, and curing processes- Exposure to quality parameters: peel strength, Tg, Dk/Df, thermal stressEducation- B.E. / B.Tech in Mechanical, Chemical, Polymer, or Production Engineering- MBA or PG Diploma in Operations Management is an added advantageCritical Requirement: Must have hands-on experience managing a hot press production line in a CCL / laminates environment.REPORTING & LOCATIONReports To CEO / Managing DirectorLocation Plant Site, IndiaTeam Size 30-100+ (depending on phase)

As a Quality Engineer, you will play a crucial role in maintaining and improving the quality standards of our products and processes. Your main responsibilities will include:- **Quality Assurance**: Conduct regular inspections and audits of products and processes to ensure compliance with quality standards and specifications.- **Testing Protocols**: Develop and implement testing protocols to evaluate product quality and reliability. You will record results and provide feedback for improvement.- **Root Cause Analysis**: Investigate and analyze defects and non-conformance issues. You will identify root causes and recommend corrective actions to prevent recurrence.- **Documentation**: Maintain accurate records of quality inspections, test results, and corrective actions taken. This documentation is essential for tracking improvements and ensuring accountability.- **Collaboration**: Work closely with production and engineering teams to communicate quality standards and resolve issues effectively. Teamwork is vital for enhancing product quality.- **Training**: Provide guidance and training to production staff about quality standards and procedures, ensuring everyone understands their role in maintaining quality.To succeed in this role, candidates should possess a Diploma in a related field and have 2 to 3 years of experience in quality engineering. A keen eye for detail and strong analytical skills are essential. Additionally, candidates should have good communication skills to effectively collaborate with team members and document findings clearly. A proactive approach to problem-solving will be highly valued in this position.

We are looking for a dedicated Solar Site Supervisor to manage day-to-day activities at solar project sites. The candidate will be responsible for supervising installation teams, ensuring quality and safety, coordinating with contractors, and completing work within timelines. This role requires strong technical knowledge of solar systems and practical on-site experience.

Position OverviewThe Aircraft Mechanic / Aircraft Technician is responsible for performing maintenance, repair, inspection, and modification tasks on aircraft to ensure they are safe, airworthy, and fully operational. The role involves hands-on technical work, strict adherence to aviation regulations, and close coordination with engineers, quality inspectors, and flight crews to support efficient flight operations.Key Responsibilities Aircraft Maintenance & RepairPerform scheduled (A, B, C, D checks) and unscheduled maintenance on aircraft and components.Inspect, troubleshoot, and repair airframes, engines, hydraulic, pneumatic, fuel, and electrical systems.Carry out defect rectification, part replacement, and system testing as per maintenance manuals.Conduct routine inspections and ensure all work meets safety and airworthiness standards.Perform line maintenance and base maintenance activities according to daily operational needs.Support pre-flight and post-flight checks to ensure aircraft readiness. Technical & Diagnostic WorkDiagnose and repair mechanical and electrical malfunctions using testing equipment and manuals.Follow manufacturer and regulatory guidelines for maintenance tasks.Utilize specialized tools, precision instruments, and ground support equipment (GSE).Coordinate with engineers to ensure accurate troubleshooting and defect clearance.Ensure calibration and care of maintenance tools and test instruments. Documentation & ReportingRecord all maintenance activities in job cards, logbooks, and technical documents.Update maintenance tracking systems (e.g., AMOS, Trax, Ramco, or Rusada Envision).Ensure accurate documentation for all inspections, replacements, and modifications.Report component failures, delays, and discrepancies to supervisors or engineering teams.Maintain proper traceability of spares and materials used in maintenance. Safety & ComplianceComply with DGCA / FAA / EASA / CAR-145 safety and maintenance standards.Adhere to company safety management systems (SMS) and quality procedures.Follow proper lockout/tagout and hazardous materials handling procedures.Conduct work in accordance with approved maintenance data and aviation legislation.Ensure Foreign Object Damage (FOD) control and maintain a clean work environment. Team CoordinationWork collaboratively with engineers, quality control inspectors, and flight operations teams.Assist in training junior technicians or apprentices on maintenance practices.Communicate effectively with supervisors regarding progress and issues.Support quick turnaround during AOG (Aircraft on Ground) situations.Required Skills & CompetenciesExcellent technical and mechanical aptitude.Strong problem-solving and troubleshooting skills.Proficiency in using hand tools, torque wrenches, and diagnostic equipment.Sound understanding of aviation maintenance manuals and documentation.High level of attention to detail, accuracy, and discipline.Ability to work under pressure, at heights, and in outdoor conditions.Good communication and teamwork abilities.Educational QualificationDiploma / Degree in Aircraft Maintenance Engineering (AME) or Aeronautical Engineering.Certification from an approved training organization (DGCA / EASA / FAA Part-147).Valid AME license in relevant category (B1 Mechanical / B2 Avionics) preferred.Experience05 years of experience in aircraft maintenance, repair, or overhaul (MRO).Experience on specific aircraft types (e.g., Airbus A320, Boeing 737, ATR, Embraer) is an advantage.Fresher candidates with DGCA-approved AME training may also apply (for trainee roles).Working ConditionsWork performed in hangars, workshops, or ramp areas (day/night shifts).May involve rotational shifts, weekends, and emergency standby duties.Physically demanding role requiring manual handling, climbing, and precision work.

WE ARE HIRING POST : QC ENGINEEREDUCATION : DIPLOMA MECHANICALEXPERIENCE : 4-5 YEAR LOCATION : MANJUSAR GIDCSALARY : 25-30 K DEPEND ON INTERVIEWAPPLY : tpo.vp2017@gmail.comCALL : 8306133342WE ARE HIRING POST : QC ENGINEEREDUCATION : DIPLOMA MECHANICALEXPERIENCE : 4-5 YEAR LOCATION : MANJUSAR GIDCSALARY : 25-30 K DEPEND ON INTERVIEWAPPLY : tpo.vp2017@gmail.comCALL : 8306133342

WE ARE HIRING SAFETY OFFICERThe Cnadidate must have good experience and exposure inIdentify unsafe acts and unsafe conditions and take corrective actions.Conduct regular safety inspections and audits of machinery, equipment, and work areas.,investigate incidents/accidents, and implement corrective actions, EHS policies & procedure Motivate & drive the team to follow safety rules & regulations at workplace, Manage and maintain safety equipment,Fire Equipment, and first-aid facilities,Ensure compliance with local and national safety laws, factory acts, OSHA standards, and environmental regulations,Maintain and update safety records, permits, and statutory registers,Coordinate with government safety inspectors and auditors,Conduct fire drills and evacuation drills.Support ISO 45001 / EHS management systems.Conduct safety induction training for new employees and contractors.Organize periodic toolbox talks,and Safety Awerness training.Promote safety awareness and safe work practices among workers and supervisors, to comply statutory requirement as per factory Act

WE ARE HIRING FOR QC ENGINEERPOST : QC ENGINEEREDUCATION : DIPLOMA / BE MECHANICALEXPERIENCE : 2-3 YEAR IN QCLOCATION : MANJUSAR GIDC VADODARASALARY : 20-30 K DEPEND ON INTERVIEWAPPLY : tpo.vp2017@gmail.comCALL : 8306133342

Devise sampling procedures and directions for recording and reporting quality data. Review the implementation and efficiency of quality and inspection systems. Plan, conduct and monitor testing and inspection of products to ensure product quality.