Estimation Engineer Jobs

1) Overall 6 Years Experience in Construction Project, Instrumentation Works in Oil & Gas / Refinery / Petrochemical Projects & Out of 6 Years, Min. 2 Years in Cost & Estimation Functions. 2) Review of Tender Documents & Preparing Enquiries for Subcontract / Vendor Service works.3) Must have good computer skills (MS Office).4) Gulf / Abroad Experience Preferred.

We are looking for a Costing Engineer with 2 to 6 years of experience to join our team in Jaipur. The ideal candidate will be responsible for estimating project costs and ensuring efficient resource utilization.Key Responsibilities:- Cost Estimation: Analyze project specifications and perform detailed cost estimates to provide accurate pricing for projects.- Budget Monitoring: Regularly monitor project budgets to track expenses and identify any potential cost overruns.- Data Analysis: Gather and analyze data on material costs, labor rates, and overhead to support cost calculations and recommendations.- Collaboration: Work closely with project managers, engineers, and suppliers to gather necessary information for pricing decisions.- Reporting: Prepare detailed reports on cost estimates, budgets, and financial forecasts to help management make informed decisions.- Cost Control Strategies: Develop and recommend strategies to minimize costs while maintaining quality standards in project execution.Required Skills and Expectations:Candidates should hold a Bachelors degree in Engineering (B.E.) and demonstrate strong analytical skills with a keen attention to detail. Proficiency in costing and estimating software is essential. Good communication skills are necessary for effective collaboration with various departments. Candidates must be able to work under pressure and meet tight deadlines. A proactive approach to problem-solving and the ability to adapt to changing project requirements are important for success in this role.

As an Estimation Engineer in Hyderabad, you will play a crucial role in preparing accurate cost estimates for projects, ensuring that they align with the project's requirements and budget constraints.Key Responsibilities:- Prepare Cost Estimates: Calculate the cost of materials, labor, and other resources needed for projects based on detailed specifications.- Analyze Project Specifications: Review and interpret project plans and specifications to identify requirements and constraints affecting the estimates.- Collaboration with Teams: Work with project managers and engineers to gather project information and resolve any discrepancies in the estimates.- Maintain Database of Rates: Create and update a database of material and labor costs to ensure that estimates are based on current market rates.- Risk Assessment: Identify potential risks in the project scope that may affect costs and propose strategies to mitigate those risks.- Report Generation: Prepare detailed reports and presentations of estimates to communicate findings and recommendations to stakeholders effectively.Required Skills and Expectations:Candidates should possess a Bachelors degree in Engineering. A minimum of 2 to 4 years of experience in estimation or related roles is essential. Strong analytical skills are required to assess project specifications accurately. Proficiency in estimation software and Microsoft Excel is expected. Candidates should demonstrate excellent communication skills to interact with various teams and present estimates clearly. Attention to detail and the ability to work under tight deadlines are crucial for success in this role. Familiarity with project management principles is an added advantage.

Key ResponsibilitiesPrepare quantity estimations based on drawings, BOQs, and project specifications.Assist in the preparation and submission of client and contractor bills.Verify quantities executed at site and maintain measurement records.Prepare rate analysis for project items and variations.Support cost estimation for tenders, quotations, and project proposals.Maintain billing records, work progress reports, and project documentation.Coordinate with site engineers and project teams for quantity verification.Monitor project progress against billing milestones.Assist in preparing monthly billing and cost reports.Ensure compliance with contract terms and project requirements.Support reconciliation of quantities, materials, and project costs.Assist during audits and project documentation reviews.

As a Senior QA Engineer, you will play a crucial role in ensuring the quality and reliability of our software products. Your responsibilities will include the following:- Test Planning and Strategy: You will develop and implement comprehensive test plans to ensure our software meets high-quality standards.- Test Case Development: Your role will involve creating detailed test cases based on requirements and specifications to verify functionality and performance.- Automation Testing: You will design and maintain automated tests to enhance testing efficiency and coverage, reducing the time taken for regression testing.- Defect Identification and Reporting: You will work closely with the development team to identify, document, and track defects, ensuring they are resolved promptly.- Collaboration with Cross-Functional Teams: You will collaborate with developers and product managers to understand features and requirements, facilitating better testing and quality assurance processes.- Continuous Improvement: You will contribute to the enhancement of QA processes and practices, advocating for best practices in software testing and quality assurance.To excel in this role, you should have a Bachelors degree in Engineering and ideally between 0 to 3 years of experience in software testing. Proficiency in both manual and automated testing methodologies is essential. Strong analytical skills, attention to detail, and the ability to work effectively in a team are expected. Familiarity with various testing tools and frameworks will be an added advantage. You should be able to communicate clearly and work diligently in a fast-paced environment.

We are seeking a dedicated and detail-oriented Costing Engineer to join our team in Sawantwadi, Pune. The ideal candidate will have 2 to 4 years of relevant experience and a diploma in engineering or a related field. As a Costing Engineer, your primary responsibility will be to analyze and estimate the costs associated with projects, ensuring that all financial aspects are accounted for accurately. You will review project specifications and collaborate with various departments to gather the necessary information for cost estimation. Evaluating material costs, labor, overhead, and other expenses is crucial to providing comprehensive cost analyses.Key responsibilities include preparing detailed cost breakdowns for project proposals, monitoring ongoing project costs to identify discrepancies, and working closely with project managers to provide financial insights throughout the project lifecycle. You will also update pricing databases and conduct cost-benefit analysis to recommend cost-saving measures.Candidates should possess strong analytical skills and a keen attention to detail to ensure accuracy in cost estimates. Proficiency in costing software and Microsoft Excel is essential. Effective communication skills are required, as you will interact with team members from different departments. A proactive attitude towards problem-solving and a strong understanding of engineering principles are also expected. If you are looking for a challenging role where your contributions will directly impact project success, we encourage you to apply.

Job descriptionRole & responsibilities* Prepare BOQs, Bar Bending Schedules & Quantity Surveys* Conduct quantity estimations and rate analyses* Ensure accurate billings within deadlines* Manage subcontractor billing process from start to finishRole: Billing / Planning EngineerIndustry Type: Engineering & ConstructionDepartment: Construction & Site EngineeringEmployment Type: Full Time, PermanentRole Category: Construction Engineering

Job description:Job Description - Plumbing Draftsman / Plumbing DrafterPosition: Plumbing Draftsman / Plumbing DrafterDepartment: MEP DesignIndustry: MEP Consulting / EngineeringLocation: BengaluruOpenings: 2Job SummaryWe are looking for skilled Plumbing Draftsmen/Drafters to join our MEP design team. The candidates will be responsible for preparing accurate plumbing drawings, layouts, and documentation for building projects while coordinating with other MEP disciplines and ensuring drawings comply with project requirements and applicable standards.Key ResponsibilitiesPrepare detailed 2D plumbing drawings and layouts using AutoCAD.Develop plumbing layouts for water supply, drainage, soil and waste systems.Prepare sanitary, storm-water and rainwater drainage layouts.Prepare pipe routing, shaft layouts, riser diagrams, and schematic drawings.Develop detailed drawings for plumbing fixtures and equipment.Prepare plumbing drawings based on architectural and engineering requirements.Coordinate plumbing layouts with HVAC, Electrical, Fire Fighting, and Architectural drawings.Identify and resolve clashes and coordination issues before finalizing drawings.Revise drawings based on comments from engineers, clients, and project teams.Prepare detailed sections, elevations, and enlarged layouts wherever required.Maintain proper drawing standards, layers, dimensions, annotations, and drawing revisions.Assist engineers in preparing BOQ, quantity take-offs, and material schedules when required.Ensure drawings are issued within project timelines and maintain proper document control.Coordinate with the site team and incorporate site requirements or approved changes into drawings.Required SkillsStrong knowledge of AutoCAD and plumbing drafting.Good understanding of building plumbing systems.Knowledge of water supply and drainage systems.Ability to read and understand architectural and MEP drawings.Good knowledge of pipe sizes, fittings, plumbing fixtures, and routing.Understanding of plumbing shafts, risers, and service coordination.Knowledge of Revit MEP/BIM will be an added advantage.Good attention to detail and accuracy.Ability to work independently as well as coordinate with the MEP design team.Candidate ProfilePosition 1 - Junior Plumbing DrafterExperience: 1 year of relevant experience.Gender-FemaleFreshers with strong AutoCAD knowledge may also be considered.Good knowledge of basic plumbing drafting and AutoCAD.Should be willing to learn and work closely with senior engineers/drafters.Position 2 - Senior Plumbing DrafterExperience: Approximately 10 years of relevant experience. Gender- MaleStrong experience in building plumbing drafting and MEP coordination.Should be capable of independently handling plumbing drawings for projects.Should have good knowledge of AutoCAD and preferably Revit MEP.Experience coordinating with architects, engineers, and site teams will be preferred.EducationDiploma / ITI / Bachelor's degree in Civil, Mechanical, Plumbing, or a related engineering field is preferred.Key QualitiesStrong technical understanding.Good communication and coordination skills.Ability to meet deadlines.Attention to detail.Problem-solving ability.Team-oriented and professional approach.Note: Candidates should have practical experience in building plumbing drafting and MEP coordination. Experience in large-scale commercial, residential, hospitality, or industrial projects will be an advantage.

We are looking for an Estimation Engineer to join our team in Chennai. The ideal candidate will have 1 to 7 years of experience and a diploma in a relevant field. This is a full-time position, and work will be conducted from our office.Key Responsibilities:- Prepare Cost Estimates: Analyze project specifications and prepare detailed cost estimates to ensure accurate budgeting for projects.- Analyze Blueprints and Drawings: Review project plans, blueprints, and drawings to identify materials and labor required, ensuring all aspects of the project are covered.- Coordinate with Stakeholders: Communicate with project managers, architects, and clients to gather information that is crucial for preparing precise estimates.- Evaluate Subcontractor Quotes: Collect and assess quotes from subcontractors and suppliers to ensure competitive pricing and adherence to project specifications.- Maintain Documentation: Organize and maintain all estimation documents and reports, ensuring they are up to date and accessible for future reference.- Assess Risks: Identify potential risks and issues related to costs and provide recommendations to mitigate these risks.Required Skills and Expectations:Candidates should have strong analytical skills, enabling them to make accurate assessments of project costs. Excellent communication skills are essential for effective collaboration with various stakeholders. Proficiency in estimation software and tools is expected, along with a solid understanding of construction methods, materials, and regulations. Attention to detail is crucial, as minor errors can lead to significant budget implications. The candidate should be able to work independently while also thriving in a team-oriented environment.

Key Responsibilities: Monitor government and private e-tender portals for new opportunities. Identify eligible tenders based on the company's business scope and qualifications. Review tender documents, BOQs, drawings, specifications, and contract conditions. Analyze technical, commercial, and contractual requirements. Prepare Rate Analysis Prepare technical bid documents and ensure compliance with tender requirements. Coordinate with Estimation, Planning, Procurement, Finance, Legal, and Design teams for bid preparation. Obtain vendor and subcontractor quotations to support cost estimation. Prepare and maintain tender submission checklists and documentation. Maintain updated records of company credentials, financials, Work Experience, work orders, client references, equipment, employee details, bank guarantees, and statutory documents. Upload and submit bids through government e-procurement portals within deadlines. Attend pre-bid meetings and respond to client clarifications. Maintain tender records, submission status, and management reports. Support project handover to the execution team upon contract award. Ensure confidentiality, accuracy, and compliance throughout the tendering process.Qualification : Bachelor's Degree in Civil Engineering or a related discipline.

Company: Tempo Instruments Pvt. Ltd.Department: Production / EngineeringJob Location: Mira Road, MumbaiExperience: 3-5 Years

We are looking for a experienced Billing Engineer to manage client Plumbing & Firefighting billing , subcontractor billing, quantity verification, and documentation for Plumbing & Firefighting projects. The candidate will ensure accurate measurement, timely submission of bills, and proper coordination with site and accounts teams.

As an Electrical Design & Estimation Engineer, you will be responsible for the design and estimation of various electrical systems. Your expertise will help ensure projects are completed efficiently and meet quality standards. Your key responsibilities will include:- Design Electrical Systems: Create detailed designs for electrical systems to meet project requirements, ensuring compliance with industry standards and safety regulations.- Prepare Estimates: Develop accurate cost estimates for electrical projects by calculating material, labor, and overhead costs to inform budgeting and bidding processes.- Conduct Site Evaluations: Visit project sites to assess existing electrical systems and gather relevant data, which will inform your designs and estimates.- Collaborate with Teams: Work closely with project managers, architects, and other engineers to integrate electrical designs with overall project plans and requirements.- Review Specifications: Analyze project specifications to ensure that electrical designs align with client expectations and technical requirements.- Maintain Documentation: Keep thorough records of design changes, estimates, and project communications to ensure all stakeholders have access to up-to-date information.To succeed in this role, candidates should possess the following skills:- A diploma in Electrical Engineering or a related field.- 2 to 5 years of relevant experience in electrical design and estimation.- Proficiency in design software such as AutoCAD or similar tools.- Strong analytical skills to assess project requirements and prepare detailed estimates.- Good communication skills to effectively work with team members and clients.- A detail-oriented approach to ensure accuracy in designs and cost estimates.

Key ResponsibilitiesPrepare and submit client bills as per project progress and contractual agreements.Verify contractor and subcontractor bills, measurements, and payment claims.Review and certify quantities executed at the project site.Maintain measurement books (MB), billing records, and project documentation.Coordinate with project managers, site engineers, and finance teams for billing-related matters.Track project costs, variations, and change orders.Prepare rate analysis and cost estimates for additional work items.Reconcile quantities and costs with project budgets and contracts.Ensure compliance with contractual terms, specifications, and billing procedures.Monitor receivables and assist in payment follow-ups with clients.Prepare MIS reports related to billing, project costs, and revenue realization.Support project audits by maintaining accurate billing records and documentation.

1) Overall 6 Years Experience in Construction Project, Instrumentation Works in Oil & Gas / Refinery / Petrochemical Projects & Out of 6 Years, Min. 2 Years in Cost & Estimation Functions.2) Review of Tender Documents & Preparing Enquiries for Subcontract / Vendor Service works.3) Must have good computer skills (MS Office).4) Gulf / Abroad Experience Preferred.

Experience :1) Overall 6 Years Experience in Construction Project Mechanical Works in Oil & Gas / Refinery / Petrochemical Projects & Out of 5 Years, Min. 2 Years in Cost & Estimation Functions.2) Review of Tender Documents & Preparing Enquiries for Subcontract works.3) Must have good computer skills (MS Office).4) Gulf / Abroad Experience Preferred.

Hiring: Billing & Estimation Engineer (3-5 Years Experience) Location: Kharadi, Pune Job Description:We are looking for a Billing & Estimation Engineer with 3 to 5 years of experience, preferably in MIVAN and High-Rise Residential Construction Projects. Key Responsibilities:Prepare cost estimates, tender documents, and BOQsHandle client and subcontractor billing as per site progressWork on MIVAN shuttering and high-rise construction billing formatsAnalyze drawings, technical specs, and quantitiesMaintain project-wise cost control & documentationPrepare and process change orders / variations Qualifications:Diploma / Degree in Civil Engineering3 to 5 years of relevant experience in MIVAN and high-rise building projectsProficient in MS Excel, AutoCAD, and estimation softwareTo apply, contact: 9823520443 www.marsplacements.co.in