3847

Fresher Engineering Jobs

Filters

  • 0 - 6 yrs
  • 30.0 Lac/Yr
  • Kolkata
Aircraft Maintenance Aircraft Engineer Aircraft Maintenance Engineer Aircraft Maintenance Technician Aircraft Mechanic Aircraft Technician Avionics Avionics Technician Avionics Engineer Aviation Trainer Aviation Electrical Engineer Echanical Mechanical Engineer Aviation Engineer Aerospace Engineer Aerospace Engineering Aerospace Aeronautical Engineer Aeronautical
Job TitleAircraft Maintenance Engineer (AME)DepartmentAircraft Maintenance / EngineeringJob SummaryAn Aircraft Maintenance Engineer (AME) is responsible for inspecting, maintaining, repairing, troubleshooting, and certifying aircraft to ensure they are safe, airworthy, and compliant with aviation regulations. The role involves carrying out scheduled and unscheduled maintenance on aircraft systems, engines, avionics, electrical components, hydraulic systems, landing gear, and structural components while adhering to the standards established by aviation authorities.Key ResponsibilitiesAircraft Inspection & MaintenancePerform routine, preventive, scheduled, and unscheduled aircraft maintenance.Conduct daily, transit, weekly, A-check, B-check, C-check, and heavy maintenance inspections.Inspect aircraft structures, fuselage, wings, landing gear, flight controls, and engines.Diagnose and rectify aircraft defects using approved maintenance procedures.Replace, repair, and overhaul defective aircraft components.Ensure all maintenance tasks are completed according to the Aircraft Maintenance Manual (AMM).Troubleshooting & RepairsIdentify mechanical, hydraulic, electrical, pneumatic, and avionics faults.Use specialized diagnostic tools and testing equipment.Repair aircraft systems while maintaining manufacturer specifications.Coordinate with engineering teams for complex technical issues.Perform functional tests after repairs to verify serviceability.Engine & Component MaintenanceInspect aircraft engines for wear, leaks, corrosion, and damage.Perform engine servicing, oil changes, filter replacement, and component inspections.Maintain propellers, Auxiliary Power Units (APU), and fuel systems.Monitor engine performance and recommend corrective actions.Avionics & Electrical SystemsInspect communication and navigation systems.Maintain radar, autopilot, cockpit instrumentation, and electrical wiring.Test aircraft electronic systems for operational reliability.Ensure compliance with avionics maintenance procedures.Documentation & ComplianceComplete maintenance logs, inspection reports, and defect records.Maintain aircraft technical documentation accurately.Ensure compliance with aviation regulatory authorities.Certify aircraft for return to service after maintenance (where appropriately licensed).Follow company maintenance policies and quality assurance procedures.Safety & Quality AssuranceFollow all aviation safety regulations and standard operating procedures.Maintain clean and organized work areas.Ensure proper use of Personal Protective Equipment (PPE).Report safety hazards and technical discrepancies immediately.Participate in safety audits and quality inspections.Team CoordinationWork closely with pilots, technicians, quality inspectors, and operations staff.Coordinate maintenance schedules with flight operations.Assist junior technicians with technical guidance and training.Participate in emergency aircraft recovery and AOG (Aircraft on Ground) support.Required QualificationsDiploma or Bachelor's Degree in Aircraft Maintenance Engineering, Aeronautical Engineering, Mechanical Engineering, or Aerospace Engineering.DGCA-approved AME qualification or equivalent aviation authority certification is preferred.Valid Aircraft Maintenance Engineer License (where applicable).Type rating on specific aircraft is an advantage.Relevant experience in aircraft maintenance is preferred.Required SkillsStrong knowledge of aircraft systems and maintenance procedures.Excellent troubleshooting and fault diagnosis skills.Knowledge of aviation regulations and airworthiness standards.Ability to interpret aircraft maintenance manuals and engineering drawings.Strong analytical and problem-solving abilities.Excellent attention to detail.Good communication and teamwork skills.Ability to work under pressure and meet strict deadlines.Computer proficiency in maintenance management software.Good technical documentation skills.Technical KnowledgeAircraft StructuresGas Turbine EnginesHydraulic SystemsPneumatic SystemsElectrical SystemsAvionics SystemsFlight Control SystemsLanding Gear SystemsFuel SystemsAircraft DocumentationMaintenance PlanningAircraft Safety StandardsPreferred CertificationsDGCA Aircraft Maintenance Engineer LicenseEASA Part-66 License (preferred internationally)ICAO-compliant aviation trainingHuman Factors TrainingSafety Management System (SMS) TrainingFuel Tank Safety TrainingEWIS (Electrical Wiring Interconnection System) TrainingAircraft Type Rating CertificationWorking ConditionsAirport hangars, maintenance bases, and line maintenance stations.Rotational shifts including nights, weekends, and public holidays.Outdoor work in varying weather conditions.Physically demanding work involving standing, climbing, bending, and lifting equipment.Exposure to aircraft noise, fuels, lubricants, and hydraulic fluids while following strict safety procedures.Salary Range (India)Fresher: 3.5 - 6 LPA2-5 Years: 6 - 10 LPA5-10 Years: 10 - 18 LPALicensed/Type-Rated AME: 15 - 30+ LPA (depending on airline, aircraft type, and experience)
View all details

12th Pass Freshers For Roustabout

Petrocore Operations Oilfield

Rigger Roustabout Offshore Offshore Platforms Offshore Drilling Offshore Lead Floor Man Diploma Trainee Diploma Fitter Diploma Engineer Diploma Trainee Engineer Diploma Mechanical Engineer
We are looking for a dedicated and hardworking Roustabout to join our team in Saudi Arabia. As a Roustabout, you will play a crucial role in supporting various operations, ensuring that tasks are completed safely and efficiently.Key Responsibilities:- Assist with Rig Operations: Support the rig crew in setting up, maintaining, and dismantling equipment used in drilling operations. This includes handling tools and materials needed for efficient workflow.- General Maintenance: Help with the upkeep of the work site and equipment to ensure a safe and clean environment. This involves cleaning decks, managing waste, and performing minor repairs as needed.- Material Handling: Load and unload equipment and supplies, ensuring that all items are transported safely and securely to the proper locations on site.- Safety Compliance: Follow safety procedures and guidelines to ensure personal safety and the safety of others on the site. This includes wearing appropriate safety gear and participating in safety drills.- Team Cooperation: Work closely with other crew members, showing teamwork and communication skills to ensure tasks are completed effectively and on time.Required Skills and Expectations:- Must have completed at least the 12th grade education.- Strong physical stamina and fitness, as the job involves manual labor and working in various weather conditions.- Willingness to learn and follow instructions from supervisors.- Basic understanding of safety practices in industrial environments is a plus.- Positive attitude and ability to work in a team-oriented environment.- Must be male, as per job requirements.
View all details
  • 0 - 1 yrs
  • 4.5 Lac/Yr
  • Chennai
Pharmacy Pharmacist Doctor MBBS Pharma D Pharma Pharma D BPT MPT Staff Nurse Nursing Biomedical Service Engineer Biochemistry Microbiology Clinical Pharmacist Physiology Nursing Staff Biotechnology Biomedical Engineer Biochemist Bpharma PLC M D Pharm
Description : Develop and formulate new food products based on market requirements.Test and improve existing food products, recipes, and formulations.Conduct quality checks on raw materials, ingredients, and finished products.Ensure compliance with food safety, hygiene, and quality standards.Monitor food processing and production activities.Conduct shelf-life and stability studies for food products.Perform sensory evaluation of food products for taste, texture, aroma, and appearance.Research new ingredients, food technologies, and preservation methods.Coordinate with production, quality control, and R&D teams.Identify and resolve product quality and processing issues.Maintain product specifications, laboratory records, and technical reports.Assist in developing nutritional information and product labels.Ensure proper storage and handling of ingredients and finished products.Support audits and maintain food safety documentation.Stay updated on food industry regulations, standards, and new technologies.
View all details
  • 0 - 6 yrs
  • 100.0 Lac/Yr
  • Canada
Mechanical Maintenance Maintenance Mechanical Engineer Mechanical Maintenance Incharge Mechanical Maintenance Supervisor Mechanical Maintenance Fitter Mechanical Maintenance Engineer Executive Mechanical Maintenance Mechanical Design Autocad Mechanical
Maintenance engineers work involves checking, repairing and servicing machinery, equipment, systems and infrastructures. Maintenance engineers ensure that industrial machinery and equipment runs smoothlyExperience0 - 9 YearsNo. of Openings50EducationAny Bachelor Degree, Post Graduate DiplomaRoleMechanical Maintenance EngineerIndustry TypeEngineering / Cement / MetalsGender[ Male / Female ]Type of JobFull TimeWork Location TypeWork from Office
View all details

Get Personalized Job Matches

Based on your experience, skills, interests, and career goals to help you find the most relevant opportunities faster. Register Now!
  • Fresher
  • 4.8 Lac/Yr
  • Tajpur Mafi Moradabad
Reporting Skills SAP System Knowledge Team Collaboration Prioritization Problem-Solving Keyboard Proficiency Online Data Entry Time Management Attention to Detail Excel Proficiency Data Entry Technical Troubleshooting Communication Skills Documentation Skills Data Entry Accuracy Organizational Skills Typist Typing Embedded Hardware Embedded Technology Software Architecture Chip Design Embedded Systems Embedded C Computer Science Embedded Software Embedded
We are seeking a motivated Embedded Engineer to join our team. This is a part-time position, suitable for freshers who have completed their 12th grade and are eager to start a career in embedded systems. The role offers the flexibility of working from home.nnKey responsibilities include designing and developing embedded systems. You will work on the programming of microcontrollers and integrating hardware and software components. Additionally, you will be involved in testing and debugging embedded applications, ensuring their functionality and performance meet required standards. Troubleshooting issues and proposing improvements will also be essential parts of your job.nnThe ideal candidate should have a strong interest in electronics and programming. Familiarity with programming languages such as C or C++ is important for effective communication with microcontrollers. You should be willing to learn and adapt to new technologies quickly. Excellent problem-solving skills, attention to detail, and the ability to work independently are essential attributes for this role.nnWe are looking for someone who can dedicate time effectively while working from home. Your commitment to the projects and ability to collaborate with team members virtually will contribute significantly to your success in this position. If you are passionate about embedded systems and eager to start your career, we encourage you to apply.
View all details
  • 0 - 1 yrs
  • 4.3 Lac/Yr
  • Gandhinagar
Mechanical Engineer Checking Officer
Performs complete layout inspection by measuring dimensions, such as length, height, and distance, between reference points, using precision instruments such as micrometers, calipers, dial indicator, and CMM, to ensure product meets specifications. Able to locate reference point(s) on part and measure dimension such as angle, arc, and radii, using combinations of aids, such as surface plate parallel bars, angle plates, gauge blocks, plug pins, V blocks, sine bars, and precision measuring instruments such as height gage. Performs verification on Incoming, In-Process, and Outgoing products. Develops policies and procedures to ensure quality product Monitors indicators related to ensuring employees conform to production or processing standards Maintains operations data and prepares productivity/quality reports for R&D Manager/Production Head/ Technical Head Visually compares work pieces against one another to assess/detect manufacturing variations in processes. Be able to determine acceptance, rejection of materials presented for inspection Assists and/or trains operators on part visual acceptability, and measurement and process procedures as required Reports quality problems or findings to Quality Control Manager and follows up to ensure that corrective action has/will take place. Maintains record of inspections and prepares list of defects, interacts with other departments to ensure compliance with specification and to facilitate the acceptance of parts. Accomplish inspection related tasks as directed by the Quality Department or upper management Be a team member of the quality department and support Production, Engineering and other internal departments to further the interests of the company as a whole.
View all details
  • Fresher
  • 0.9 Lac/Yr
  • Nashik
Maintenance Operations Testing Commissioning Engineer Installation Engineer
Job Title:and Commissioning EngineerJob Responsibilities:- Handle Operations and Maintenance activities.- Perform installation, testing and commissioning of equipment.- Monitor equipment performance and system operations.- Conduct preventive and breakdown maintenance.- Identify and troubleshoot technical issues.- Coordinate with project and maintenance teams.- Prepare maintenance and commissioning reports.- Ensure safety standards and quality procedures.- Visit project sites as per requirements.Required Skills:- Knowledge of Electrical / Mechanical systems.- Experience in O&M and Commissioning activities.- Troubleshooting and problem-solving skills.- Knowledge of maintenance procedures.- Good communication and coordination skills.Qualification: BE / B.Tech / Diploma in Electrical or Mechanical Engineering (as per employer requirement).
View all details

Fresher hiring for ITI Fitter

APT Power Engineering P Ltd

  • 0 - 1 yrs
  • 2.3 Lac/Yr
  • Beeramguda Hyderabad
ITI Fitter ITI Electrician Diploma Mechanical Engineer Diploma Electrical Engineer
We are seeking an ITI Fitter to join our team in Beeramguda. This is a full-time position suitable for freshers who are eager to learn and grow in a practical environment.Key Responsibilities:- Training and Skill Development: Assist in the training process to gain hands-on experience in fitting and mechanical tasks specific to our operations.- Technical Support: Support maintenance and assembly tasks, ensuring that all fittings and mechanical components are accurately assembled and maintained.- Collaboration: Work closely with senior fitters and engineers to understand equipment operations and contribute to team projects.- Workplace Safety: Adhere to safety guidelines and protocols to maintain a safe working environment for yourself and colleagues.Required Skills and Expectations:- Educational Background: Candidates must have passed the 10th grade and hold an ITI qualification in Fitter, Electrician, or ITI Mechanical Diploma.- Physical Capability: The role may involve physical tasks; candidates should be comfortable with hands-on work and able to lift and handle machinery and tools.- Team Player: A strong ability to work effectively in a team, demonstrating good communication and collaboration skills.- Eagerness to Learn: A proactive attitude towards training and development is essential; we are looking for candidates who are willing to gain new skills.This position is based in Beeramguda, offering an excellent opportunity for those starting their careers in fitting and maintenance.
View all details
  • 0 - 6 yrs
  • 3.5 Lac/Yr
  • Valasaravakkam Chennai
Service Engineer Printer Maintenance Hardware Repair Troubleshooting Hardware Engineering Printer Engineer
WE ARE HIRING!Hardware Service EngineerCompany: TANDEM - Office Printing & Document SolutionsTANDEM is looking for skilled, enthusiastic and technically inclined Hardware Service Engineers to join our technical support team.Job Responsibilities Installation, configuration and commissioning of photocopiers and printers. Diagnose and troubleshoot hardware and technical issues. Perform repair and maintenance of photocopiers, multifunction printers and related equipment. Attend customer service calls and provide timely technical support. Conduct preventive maintenance and equipment servicing. Handle spare parts, consumables and technical documentation. Maintain good customer relationships through professional service.Technical Skills & Requirements ITI / Diploma / Degree in Electronics, Electrical, Computer Hardware or a related discipline. Knowledge of computer hardware, printers and photocopiers is preferred. Understanding of printer mechanisms, networking and troubleshooting is an advantage. Good communication and problem-solving skills. Willingness to travel for customer visits and service assignments. Freshers with technical knowledge and a willingness to learn may also apply.Preferred Candidate ProfileWe are looking for candidates who are technically curious, disciplined, customer-focused and committed to delivering quality service.Job Type: Full-timeWork Location: Chennai / Surandai, as per vacancy
View all details
  • Fresher
  • 3.3 Lac/Yr
  • Delhi NCR
Siemens AC Drives PLC Panel Designing
We are seeking a motivated Automation Engineer to join our team in Delhi NCR. PLC AUTOMATION AND VFD PROGRAMMING This full-time position is ideal for recent diploma graduates looking to start their careers in automation technology.nnKey Responsibilities:nn- Develop Automation Solutions: Design and implement automation processes to improve efficiency and productivity within the organization.n n- Test and Troubleshoot Systems: Analyze automation systems and perform tests to identify areas for improvement, ensuring systems operate smoothly.nn- Collaborate with Teams: Work closely with other engineering teams to integrate automation solutions and ensure alignment with project goals.nn- Maintain Documentation: Keep detailed records of automation processes, system configurations, and changes made for future reference.nnRequired Skills and Expectations:nnThe ideal candidate will hold a diploma, demonstrating a foundational understanding of engineering principles. Freshers will be expected to show enthusiasm for learning and a willingness to adapt to new technologies. Strong analytical and problem-solving skills are essential to effectively identify issues and implement solutions. Good communication skills are necessary for collaboration with team members. The role requires a keen attention to detail and a proactive approach to both individual and team tasks. Applicants must be male and ready to work from the office in Delhi NCR.
View all details

Fresher - Urgent Requirement For Sales Engineer

GenNEXT Lab Technologies Pvt Ltd

  • 0 - 2 yrs
  • Rohini Sector 9 Delhi
Industrial Sales Lead Generation Technical Sales Area Sales Sales
Join our team as a Sales Engineer in Rohini Sector 9, Delhi, where you will be part of a dynamic environment focused on driving sales and engineering solutions. This entry-level position is suitable for recent graduates or individuals with up to two OR more years of experience.As a sales engineer, your key responsibilities will include engaging with clients to understand their needs, presenting our engineering solutions, and providing product demonstrations. You will also collaborate with the sales team to prepare proposals and ensure customer satisfaction. Your ability to effectively communicate technical information to clients will be vital in building strong relationships and closing sales.Candidates for this role should possess excellent communication skills, both verbal and written, to convey complex concepts clearly. A technical background is essential, allowing you to understand and explain product features enthusiastically. Strong listening skills are important to identify client requirements accurately, while a problem-solving mindset will help you address client concerns effectively. Additionally, a proactive attitude and willingness to learn will contribute to your success in this position.This full-time role requires you to work from the office, ensuring effective collaboration with your team and clients. We are looking for male candidates who are eager to start their careers in sales engineering, ready to learn and grow in a supportive environment.
View all details
  • 0 - 2 yrs
  • 2.5 Lac/Yr
  • Bhubaneswar
Service Engineer Sales Man Computer Operator Computer Hardware Hardware Networking Desktop Support Software Installation Laptop Support Hardware Design Computer Networking Network Troubleshooting Software Troubleshooting Hardware Installation Printer Support LAN Support Printer Troubleshooting CCTV Installation
Join our team as a Computer Hardware Engineer in Bhubaneswar, India. We are looking for enthusiastic individuals who are eager to start their careers in computer hardware. This position is ideal for candidates with 0 to 2 years of experience, and a minimum education of 10th pass. Key Responsibilities:- Design and Test Hardware Components: You will be involved in creating designs for computer hardware and testing these components to ensure they function properly and meet quality standards.- Troubleshoot and Repair: Your job will include identifying problems in existing hardware and performing repairs to maintain optimal performance.- Collaborate with Team Members: You will work closely with engineers and other professionals to support hardware integration and improve system performance.Required Skills and Expectations:- Basic Understanding of Computer Hardware: A foundational knowledge of how different hardware components work together is essential.- Problem-Solving Skills: You should be able to approach challenges with a logical mindset and develop effective solutions.- Willingness to Learn: Since this role is for entry-level candidates, a strong desire to learn and grow in the field of computer engineering is crucial.- Good Communication Skills: You will need to communicate effectively with teammates and supervisors, sharing your ideas and requirements clearly. This is a full-time, office-based position, providing an excellent opportunity to launch your career in computer hardware engineering.
View all details
  • 0 - 3 yrs
  • 4.5 Lac/Yr
  • Khandala MIDC Satara
Autocad Electrical Engineer
As an Electrical Engineer, you will be responsible for designing and creating electrical schematics, single-line diagrams, wiring diagrams, and panel layout drawings using CAD tools. This position is an apprenticeship based in Khandala MIDC, Satara, ideal for recent graduates or those with up to three years of experience holding a diploma.Key responsibilities will include:- Creating technical drawings: You will use CAD software to develop detailed electrical schematics and layout drawings.- Reading electrical drawings: Efficiently interpreting and understanding electrical designs is essential.- Preparing bills of material: You will compile lists of materials required for projects.- Reporting work progress: You will communicate updates and completion status effectively.- Client communication: Addressing client queries and concerns will be part of your responsibilities.Required skills include:- Proficiency in reading and creating electrical drawings, demonstrating technical knowledge.- Familiarity with CAD tools for design work and drafting.- Hands-on skills: Ability to work manually with electrical components and systems.- Strong communication skills: To liaise with clients and report progress clearly.To excel in this role, you should be detail-oriented, able to collaborate with a team, and manage tasks efficiently. The office-based position requires dedication and a commitment to developing your technical skills in the electrical engineering field.
View all details
  • Fresher
  • 1.5 Lac/Yr
  • Kolkata
Networking LAN-Local Area Network Hardware Networking Computer Hardware Server Support Desktop Support Service Desk Laptop Support IT Helpdesk IP Addressing Hardware Installation Desktop Administration OS Installation
Responding to client support requests.Contacting clients to find out the nature of the problem.Travelling to the client's location or connecting via a remote link.Troubleshooting hardware and software issues.Installing and maintaining hardware and computer peripherals.Installing and upgrading operating systems and computer software.Troubleshooting networking and connection issues.Advising on software or hardware upgrades.Providing basic training in computer operation and management.Completing job reports and ordering supplies.
View all details
  • 0 - 2 yrs
  • Kolkata
Instrumentation Engineer Instrumentation Technician After Sales Service Preventive Maintenance
We are seeking a dedicated Service Engineer to join our team in Kolkata. This entry-level position is ideal for candidates with 0 to 2 years of experience who hold a diploma in a relevant field. The Service Engineer will play a crucial role in providing technical support and solutions to our clients.Key Responsibilities:- Technical Support: Assist clients with troubleshooting and resolving technical issues related to our products, ensuring a high level of customer satisfaction.- Maintenance and Repair: Conduct regular maintenance, repairs, and inspections of equipment to ensure optimal performance and reliability.- Documentation: Maintain accurate records of service calls, including problems encountered and solutions provided, to improve service efficiency and client communication.- Product Demonstrations: Provide product demonstrations and training to clients, helping them understand the features and functions of the equipment.Required Skills and Expectations:Candidates should possess strong problem-solving abilities and effective communication skills to interact with clients and team members. Basic technical knowledge is essential, along with a proactive attitude towards learning and adapting to new technologies. A willingness to work collaboratively in a team environment and a commitment to customer satisfaction are also crucial for success in this role.
View all details
  • 0 - 2 yrs
  • 2.8 Lac/Yr
  • Bhabhar Banaskantha
Site Engineer Civil Engineer
We are looking for a Civil Site Engineer to join our team in Bhabhar, Banaskantha. This role is ideal for recent graduates or those with up to two years of experience in civil engineering. As a Civil Site Engineer, you will be responsible for site supervision, overseeing construction activities, and assisting in structural planning and project management. Your day-to-day activities will involve ensuring that projects comply with design specifications, managing resources on site, and coordinating with subcontractors and suppliers.Key responsibilities include:- Site supervision: Monitoring construction progress, ensuring work is carried out according to plans, and maintaining quality standards.- Structural planning: Assisting in the preparation of design documents and drawings for construction projects.- Project management: Collaborating with project stakeholders, managing timelines, and ensuring project milestones are met.Required skills and expectations:- A graduate degree in Civil Engineering is mandatory.- A maximum of two years of relevant experience in construction or civil engineering is preferred.- Strong communication and teamwork skills are essential for effective collaboration on projects.- Ability to manage multiple tasks and meet deadlines in a dynamic work environment.- A valid driving license is necessary for fieldwork and site visits.This full-time role requires you to work from the office. Daily on-site presence will be necessary to ensure effective management of ongoing projects. The work schedule will follow standard office hours with weekends off.
View all details
  • 0 - 3 yrs
  • 1.8 Lac/Yr
  • Kolkata
Hardware Networking Desktop Support Computer Hardware LAN-Local Area Network OS Installation
We are looking for a dedicated Desktop Support Engineer to join our team in Kolkata. This entry-level position is ideal for individuals with up to 3 years of experience who are eager to grow their careers in IT support.Key Responsibilities:1. Technical Assistance: Provide support to end-users by troubleshooting hardware and software issues, ensuring efficient operation of desktop systems.2. Setup and Maintenance: Install, configure, and maintain desktop computers and peripherals, ensuring they are up and running effectively for all users.3. Documentation: Maintain records of issues and solutions in a clear and organized manner, helping build a knowledge base for future reference.4. User Training: Educate users on basic troubleshooting steps and best practices for using their desktop systems.Required Skills and Expectations:Candidates should possess a solid understanding of computer systems, networks, and troubleshooting techniques. Strong communication skills are essential to effectively assist users and convey technical information in an understandable manner. A proactive attitude and willingness to learn are important traits. As this is a full-time position based in an office environment, the candidate must be committed to working regularly on-site. A minimum educational qualification of 12th pass is required, and preference is given to male applicants. This role is perfect for someone looking to start a career in desktop support and willing to enhance their technical skills.
View all details
  • 0 - 1 yrs
  • 2.0 Lac/Yr
  • Indore
Civil 3d Autocad Site Execution
Create 2D drawings and 3D models using CAD software.Prepare detailed engineering and manufacturing drawings. Work on part modelling, assembly modelling and drafting.Understand GD&T, fits, tolerances and engineering standards.Assist in product design and development.Coordinate with production and manufacturing teams.Modify and improve existing mechanical designs.Technical Skills Required:AutoCADSolidWorks2D Drafting and 3D ModellingEngineering Drawing InterpretationBasic knowledge of GD&T and Manufacturing Processes
View all details
  • Fresher
  • Navi Mumbai
Javascript Dot Net 4.0 C# Node.Js
Company Policy: Fresher's Policy: Package: Starting 3 months' salary will be 12500/- Gross monthly and next 9 months it will be 21100/- Gross monthly (for first year) Policy: - 2.8yrs written commitment Develop, enhance, and maintain software applications using JavaScript and .NET,/ C#, Node.Js technologies. Support development activities including coding, debugging, testing, and troubleshooting. Understand business requirements and convert them into technical logic Collaborate with trainers, functional consultants, and senior developers Support ERP/CRM modules during implementation and post-training Participate in testing, troubleshooting, and documentation activities functionality. Continuously learn and adapt to new technologies and development practices.
View all details

Looking For Web Developer

V-Touch Solutions.

  • 0 - 1 yrs
  • 1.3 Lac/Yr
  • Rajaji Puram Lucknow
Front End Engineer Back-End Developer Mysql Core PHP ASP.NET Javascript Team Coordinator
Web Developer - Full StackEntry-Level End-to-End Web DevelopmentLocation: Rajaji Puram, LucknowExperience: 0-6 MonthsEmployment Type: Full-TimeWork Mode: On-siteThe RoleWe're putting together a compact, hands-on development team in Lucknow and are looking to bring on a Web Developer who can move comfortably across the entire stack - the interface a user interacts with, the logic running behind it, and the data that holds it all together.We're not looking for someone boxed into one end of development. We want a developer who can pick up HTML, CSS, and JavaScript on one side, Python and/or PHP on the other, and stitch the two together with databases and APIs without needing to be walked through it.This opening is built for freshers and early-career developers (up to 6 months) who'd rather learn by shipping real features than by watching from the sidelines.Your Day-to-DayBuildingTurn requirements into working, responsive web pages using HTML5, CSS3, and JavaScript.Write server-side logic in Python and/or PHP to support those pages.Keep code clean, readable, and reusable - across both ends of the stack.ConnectingWire up interfaces to backend services, databases, and third-party APIs.Work with REST APIs and handle HTTP request-response flows correctly.Perform database operations - creating, reading, updating, and deleting records as the application demands.Trace and fix bugs, test features, and tighten up application behaviour end to end.Contribute to improving existing full-stack applications and their performance.Pair with senior developers to translate requirements into working software.Track your work through Git/GitHub and collaborate with the team.RefiningTrace and fix bugs, test features, and tighten up application behaviour end to end.Contribute to improving existing full-stack applications and their performance.Pair with senior developers to translate requirements into working software.Track your work through Git/GitHub and collaborate with the team.The Skill SetLanguages & Core ProgrammingSolid grasp of HTML5, CSS3, and JavaScript.Foundational command of Python and/or PHP - variables, functions, conditionals, loops, data structures, and basic OOP.Ability to use front-end and backend languages together within one application.Web & Application DevelopmentComfort with responsive layouts, forms, UI principles, and browser developer tools.Working knowledge of DOM manipulation and client-side form validation.Understanding of server-side programming and how application logic is structured.Familiarity with REST APIs, HTTP methods, and request-response handling.Ability to link an application to its database and external services.Databases & Data HandlingBasic MySQL knowledge with the ability to write SQL queries.Understanding of tables, relationships, primary and foreign keys.Comfort with CRUD operations.Exposure to MongoDB or other databases is a bonus.Tooling & WorkflowBasic Git and GitHub usage.Understanding of debugging, testing, and organising code sensibly.Awareness of development workflows and how applications are deployed.Academic, personal, internship, or GitHub projects all count in your favour.Bonus Points (Not Mandatory)React on the front end.Node.js or comparable backend tooling.Python frameworks such as Django or Flask, or PHP frameworks such as Laravel.Any freelance, internship, or self-driven project work you can point to.A Note on ExpectationsPython and PHP are the primary backend languages here, paired with HTML, CSS, and JavaScript on the front end. We're not expecting mastery across every technology listed - a balanced, working foundation across the stack matters far more than ticking every box.
View all details
  • 0 - 2 yrs
  • 2.8 Lac/Yr
  • Gandhinagar
Quality Control Quality Analysis Quality Check
Examine raw materials, in-process, and finished products to check for defects and ensure they meet specifications.Accept or reject finished products based on whether they meet quality standards
View all details
  • 0 - 1 yrs
  • 3.0 Lac/Yr
  • Gandhinagar
Mechanical Design AutoCAD 2D AutoCAD Designer
We are looking for 1 design engineer Post in Gandhinagar with deep knowledge in mechanical design,AutoCAD 2D, AutoCAD Designer and Required Educational Qualification is : Diploma, B.E, B.Tech
View all details
  • 0 - 1 yrs
  • 4.0 Lac/Yr
  • Chennai
Biomedical Engineer Pharmacy Physiotherapy Bsc Nurse Clinical Specialist Physical Therapist Clinical Physiotherapist Consultant Physiotherapist Physiotherapist
Key responsibilities:Assess patients' physical conditions, mobility, and functional limitations.Develop individualized treatment and rehabilitation plans.Provide exercises and therapeutic techniques to improve mobility and strength.Treat patients with musculoskeletal, neurological, and sports-related conditions.Perform therapeutic exercises, stretching, and mobility training.Use appropriate physiotherapy equipment and treatment techniques.Monitor patients' progress and modify treatment plans when required.Educate patients on home exercises and proper body mechanics.Help patients improve balance, coordination, flexibility, and physical function.Maintain accurate patient records and treatment documentation.
View all details
  • 0 - 1 yrs
  • 4.0 Lac/Yr
  • Chennai
Medical Coding Neurologist Neuro Science Trauma Care Technology Pharmacologist Physiotherapist ICU Staff Nurse Female Staff Nurse Biotechnology Biomedical Engineer Bioinformatics Biochemistry Microbiologist Biology Zoology Botany Pharmacy
We are seeking a Biomedical Engineer to join our team. This is a full time positionKey Responsibilities:B.E./B.Tech in Biomedical Engineering or an equivalent relevant qualification.Good analytical and problem-solving skills.Attention to detail and accuracy.Basic computer knowledge and documentation skills.Good communication and teamwork abilities.Willingness to learn new technologies and processes.Freshers and experienced candidates may apply.Required skills & Experience:Education background:A degree in Biomedical Engineer is essentialContact HR DEEPA:
View all details
  • 0 - 1 yrs
  • 4.0 Lac/Yr
  • Chennai
Biotechnology Biotechnologist Biomedical Engineer Biotech Biotech Engineer Biochemist Biomedical Engineering Bioinformatics Biochemistry Tech Biotechnology Bsc Biotech MSC Biotech Phil Biotechnology Biomedical Trainee Clinical Biochemistry
We are looking for a dedicated Bhms Doctor to join our team in Chennai. This full-time role is ideal for recent graduates or those with minimal experience. The position requires you to work from the office.Key Responsibilities:- Patient Consultation: Discuss and assess patients' health concerns, providing personalized treatment options based on homeopathic principles.- Diagnosis & Treatment: Utilize homeopathy to diagnose ailments and recommend appropriate treatments, ensuring to consider each patient's unique health profile.- Follow-Up Care: Monitor patients' progress and make necessary adjustments to treatments, ensuring optimal recovery and satisfaction.- Record Keeping: Maintain accurate and up-to-date patient records, including treatment plans and health outcomes, to facilitate ongoing care and future consultations.- Collaboration: Work closely with other healthcare professionals to provide comprehensive patient care and share insights on homeopathic practices.Required Skills and Expectations:The ideal candidate should possess a degree in BHMS and demonstrate a solid understanding of homeopathic principles. Strong communication skills are essential for effectively engaging with patients and explaining treatment options. A compassionate and empathetic attitude is necessary to deliver quality patient care. Additionally, the candidate should be detail-oriented to ensure accurate record-keeping and follow-up processes. A willingness to learn and adapt in a dynamic healthcare environment is also expected.
View all details

Design Engineer Fresher

Impact HR & KM Solutions

  • 0 - 1 yrs
  • 3.0 Lac/Yr
  • Nashik
Design Engineer Analog Design Engineer Electronics Design Engineer Embedded Design Engineer Hvac Design Engineer Hardware Design Engineer
We are seeking an innovative, detail-oriented, and technically proficient Design Engineer to conceptualize, model, and detail mechanical or structural engineering components. In this role, you will be responsible for creating precise 3D models and 2D manufacturing drawings, conducting engineering calculations, collaborating with production and fabrication teams, and ensuring all designs meet industry standards, client specifications, and safety codes.Key ResponsibilitiesDesign & Modeling3D Modeling & Detailing: Develop accurate 3D models, assemblies, and detailed 2D production/shop drawings using CAD software (SolidWorks, AutoCAD, CATIA, or Tekla Structures).Engineering Calculations: Perform structural, mechanical, or tolerance calculations to ensure product strength, safety, and functionality.Design Optimization: Modify and optimize existing designs to reduce material costs, improve manufacturing efficiency, and resolve shop-floor assembly issues.Documentation & CoordinationBOM & Documentation: Generate comprehensive Bills of Materials (BOM), part lists, cutting schedules, and technical documentation for production release.Cross-Functional Collaboration: Coordinate closely with production, quality control (QC), and sales teams to align design parameters with manufacturing capabilities and client requirements.Revision Control & Engineering Changes: Maintain rigorous version control for engineering drawings and implement Engineering Change Orders (ECO) accurately.
View all details

Hiring For Panel Engineer Fresher

Impact HR & KM Solutions

  • 0 - 1 yrs
  • 3.0 Lac/Yr
  • Nashik
Commissioning Control Systems Electrical Drawings Electrical Engineering HMI Development Industrial Networks Panel Design Panel Layout Project Management Safety Standards SCADA Systems Instrumentation Technical Documentation
Key ResponsibilitiesPanel Design, Engineering & DraftingSchematic & Layout Design: Design electrical schematic drawings, component layout diagrams, and wiring diagrams using CAD software (AutoCAD Electrical, EPLAN) or manual drafting.Component Sourcing & Bill of Materials (BOM): Prepare detailed BOMs, selecting right-sized circuit breakers (MCB, MCCB, ACB), contactors, relays, timers, PLCs, HMI, and busbars based on load requirements.Standards Compliance: Ensure all panel designs conform to relevant Indian Standards (IS) and international electrical safety codes.Assembly Supervision, Wiring & TestingWiring & Fabrication Supervision: Supervise shop-floor technicians during enclosure fabrication, busbar bending/mounting, component fixing, and internal wiring.Quality Control & Testing: Conduct thorough continuity checks, insulation resistance (Megger) testing, high-voltage (HV) tests, and functional/simulation testing of control logic prior to dispatch.Site Troubleshooting & Documentation: Coordinate with installation teams for on-site panel commissioning, fault-finding, and maintenance of complete as-built wiring manuals.
View all details
  • 0 - 1 yrs
  • 3.0 Lac/Yr
  • Nashik
Process Coordinator Process Handling Process Consultant Process Advisor Process Engineer Process Manager
Key ResponsibilitiesWorkflow Tracking & SOP Adherence: Monitor day-to-day operations across production, purchase, accounts, and dispatch teams to ensure strict compliance with company Standard Operating Procedures (SOPs).Cross-Departmental Coordination: Serve as the primary liaison between department heads to eliminate communication gaps, facilitate smooth handoffs, and align operational targets.Bottleneck Identification & Resolution: Proactively spot workflow delays, resource gaps, or process redundancies and implement corrective action plans.MIS & Data Reporting: Maintain operational tracking sheets, update ERP records, draft Minutes of Meetings (MOM), and submit daily/weekly performance MIS reports to management.Quality & Auditing Support: Assist in internal process audits, process mapping, and quality checks to ensure project deliverables meet established timelines.
View all details
Electronics Electronics Design Engineer Electronics Engineer Electronics & Communication Engineer Electronics Instrumentation Engineer Electronics Lecturer Electronics Technician Electronics Ser Walk in
As an Electronics Engineer, you will play a crucial role in designing, developing, and testing various electronic systems and components. Your responsibilities will include:- Circuit Design: Create and optimize circuit designs for electronic devices, ensuring they meet specifications and functionality requirements.- Prototyping: Develop prototypes to test the performance of electronic systems, allowing for adjustments and improvements before final production.- Testing and Evaluation: Conduct thorough testing of electronic components and systems, analyzing results to identify any issues and ensure quality standards are met.- Documentation: Maintain accurate documentation of designs, tests, and procedures to facilitate communication and compliance with industry standards.- Collaboration: Work closely with other engineers and teams to integrate electronic systems within larger projects, ensuring seamless operation and compatibility.- Troubleshooting: Quickly diagnose and resolve technical issues that arise during the design or testing phases, applying critical thinking and problem-solving skills.To succeed in this role, you should have a Bachelors degree in Electronics Engineering or a related field. A basic understanding of electronic circuit design, programming, and simulation software is essential. You should be familiar with using testing equipment like oscilloscopes and multimeters. Strong analytical skills, attention to detail, and the ability to work collaboratively in a team are key. Additionally, effective communication skills will help you convey technical information clearly to team members and stakeholders.
View all details

Hiring Fresher / Aeronautical Analyst / B.E

Flight2sucess Immigration Llp

  • 0 - 6 yrs
  • 50.0 Lac/Yr
  • Germany
Aeronautical Aeronautical Engineer Aeronautical Engineering Aeronautical Analyst Walk in Aircraft Performance Aviation Regulations Critical Thinking Decision Making Flight Dynamics Project Management Research Skills Simulation Software Teamwork Risk Assessment Technical Writing Data Analysis Time Management Problem Solving Mathematics Aerodynamics Attention to Detail Computer Programming Communication Skills
Job DescriptionApply under Opportunity Card GermanyExcellent opportunity in every field.excellent chances to get PR within 8 monthsFamily visaGovt visaFree education and medical facilitiesWill be treated as citizenPermanent visaHigh Level standardAmazing cultureRewarding employment opportunitiesAll post landing services will be guided before landing GermanyCandidate will have every legal right what the citizen enjoys except right to voteChild tax benefits givenPension plan givenUnemployment wages givenSpouse can legally work
View all details
Aeronautical Aeronautical Engineer Aeronautical Engineering Aeronautical Analyst Walk in Aircraft Performance Aviation Regulations Critical Thinking Decision Making Flight Dynamics Project Management Research Skills Simulation Software Teamwork Aerodynamics Risk Assessment Attention to Detail Technical Writing Communication Skills Data Analysis Time Management Problem Solving Mathematics Computer Programming
Job DescriptionApply under Opportunity Card GermanyExcellent opportunity in every field.excellent chances to get PR within 8 monthsFamily visaGovt visaFree education and medical facilitiesWill be treated as citizenPermanent visaHigh Level standardAmazing cultureRewarding employment opportunitiesAll post landing services will be guided before landing GermanyCandidate will have every legal right what the citizen enjoys except right to voteChild tax benefits givenPension plan givenUnemployment wages givenSpouse can legally work
View all details

Fresher hiring for Drilling Engineer

Petrocore Operations Oilfield

  • 0 - 4 yrs
  • 20.0 Lac/Yr
  • Dubai +1 UAE
Rigger Roustabout Petrochemical Petroleum Engineer Mechanical Engineer Mechanical Technician Mechanical Fitter Diploma Engineer Diploma Trainee Diploma Fitter Diploma Trainee Engineer Diploma Mechanical Engineer Offshore Offshore Drilling Offshore Platforms
DESCRIPTIONJob descriptionTeam member - Drilling Responsibilities The role is responsible for supporting Drilling & Completion (D&C) offshore activities, encompassing the planning, execution, and delivery of offshore exploratory and development drilling operations. The position contributes to ensuring technical integrity, operational safety, and execution efficiency across all offshore drilling activities. The role involves managing and mentoring a team of engineers, coordinating closely with subsurface, completion, and other crossfunctional teams, and providing technical oversight throughout the well lifecycle. A key responsibility includes ensuring strict compliance with HSSE standards, optimizing well designs, and driving continuous improvement in contractor performance and operational outcomes. This position requires a strong technical foundation in well engineering and offshore drilling operations, coupled with proven leadership, communication, and stakeholdermanagement capabilities, to effectively deliver safe, efficient, and costeffective offshore wells. HSSE Leadership: Exhibit a strong personal commitment to HSSE by setting an example and fostering a safety-first culture. Ensuring that all D&C activities are conducted in accordance with the highest level of safety and environmental standards. Drilling Engineering and Operations Management: Support and supervise the technical integrity and assurance of well designs, ensuring full integration between subsurface and wells teams during planning. Collaborate with the subsurface team to develop and maintain the Drilling Basis of Design (BoD). Conduct front-end planning for development wells, optimizing well designs, casing, cementing, and fluid programs. Perform technical risk assessments, contingency planning, and develop mitigation strategies for all drilling activities. Evaluate existing well designs and recommend optimizations to enhance operational efficiency. Lead and coordinate the execution of offshore drilling operations. Ensure comprehensive delivery of detailed field development drilling engineering. Cost and Resource Management: Prepare cost estimates for drilling projects. Review and optimize the Schedule of Rates and drilling programs. Contracting & Vendor Management: Oversee the entire contracting process, from preparing scopes of work to selecting rigs, well equipment, and services. Ensure alignment of all technical elements and commercial recommendations with the company's operational goals. Serving as the primary contact for well planning issues and contractor coordination. Lead contractor performance management, ensuring high standards from rigs, equipment, and well service providers. Team Leadership & Coordination: Manage and mentor a team of drilling engineers, providing guidance and technical authority throughout drilling operations. Ensure seamless coordination between in-house technical support and external drilling service providers. Regulatory & Audit Compliance: Ensure that drilling operations adhere to national and international regulations and standards. Participate in audits of rig/well sites and service bases to ensure compliance with international standards. Reporting & Stakeholder Management: Prepare and present regular reports on drilling operations, cost estimates, and project progress to senior management. Communicate with key internal and external stakeholders to ensure alignment of operational objectives. Qualifications Must: Master's or bachelor's degree within Petroleum Engineering 8-12 years of relevant work experience Demonstrated business acumen and abilities to lead teams Demonstrated experience dealing with suppliers and/or customers Excellent written and verbal communications skills Work experience in a multicultural and changing environment.
View all details
Roustabout Rigger Petrochemical Petroleum Engineer Chemical Engineer BE Mechanical Offshore Offshore Platforms Offshore Drilling Offshore Lead Diploma Trainee Diploma Fitter Diploma Engineer Diploma Trainee Engineer Diploma Electrical Engineer Diploma Mechanical Engineer
We are looking for a Mechanical Engineer to join our team in Saudi Arabia. This is a full-time position aimed at individuals who are eager to learn and grow in the field of mechanical engineering. The ideal candidate should be detail-oriented and possess strong problem-solving skills.Key Responsibilities:- Design and Analysis: Create and analyze mechanical designs using engineering software, ensuring they meet project specifications and standards.- Testing and Evaluation: Conduct tests on prototypes and existing products to evaluate performance and identify areas for improvement.- Collaboration: Work closely with other engineers and departments to ensure the seamless integration of mechanical systems in projects.- Documentation: Prepare technical reports and documentation for designs and tests, which are essential for future reference and maintenance.- Project Support: Assist in project management by providing mechanical insights and recommendations to meet deadlines and project goals.Required Skills and Expectations:Candidates should have a degree in Mechanical Engineering or a related field. Practical experience is beneficial but not required, as we welcome fresh graduates. Strong knowledge of engineering principles and design software is important. Effective communication skills, both written and verbal, are necessary to collaborate with team members and present findings clearly. The candidate should also be willing to learn and adapt in a fast-paced environment. A proactive approach to problem-solving and a commitment to quality are essential traits for success in this role.
View all details

12th Pass Freshers For Roustabout

Petrocore Operations Oilfield

  • 0 - 4 yrs
  • 20.0 Lac/Yr
  • Al Wakrah +1 Qatar
Rigger Roustabout Petrochemical Petroleum Engineer Mechanical Engineer Btech BE BE Mechanical Offshore Offshore Drilling Offshore Platforms Diploma Engineer Diploma Trainee Diploma Fitter Diploma Trainee Engineer Diploma Mechanical Engineer
We are looking for a dedicated Roustabout to join our team in Qatar. This full-time position is open to male candidates who have completed their 12th grade and possess 0 to 4 years of experience.Key Responsibilities:- Equipment Maintenance: Regularly assist in the maintenance and repair of equipment to ensure everything operates smoothly and safely.- Site Preparation: Help prepare work sites by clearing debris and setting up necessary tools and equipment for various operations.- Material Handling: Safely transport and handle materials and supplies as required, ensuring all items are organized and easily accessible.- Support Team Activities: Collaborate with other team members and provide assistance in various tasks to promote efficient workflow and productivity.- Follow Safety Protocols: Adhere strictly to safety guidelines and procedures to maintain a safe working environment and minimize risks.Required Skills and Expectations:Candidates should have a basic understanding of manual work and a willingness to learn new skills. Good physical stamina and the ability to perform repetitive tasks are essential. You should be a team player, capable of working under supervision, while also being proactive in assisting colleagues. Reliability and punctuality are expected, as is a commitment to maintaining a clean and organized workspace. Effective communication skills will help facilitate collaboration with teammates, ensuring smooth operations on-site.
View all details
  • 0 - 1 yrs
  • 3.8 Lac/Yr
  • Delhi NCR
Electrical Panel VFD Drives PLC Electrical Maintenance
As an Electrical Engineer, you will engage in key tasks related to PLC panel automation, electrical panel manufacturing, and installation of VFD panels. This full-time position is based in Delhi NCR and is suited for recent diploma graduates.Key responsibilities include:- PLC Panel Automation: You will work on programming and integrating PLC panels to enhance automation processes in various systems.- Electrical Panel Manufacturing: Your role involves participating in the design and production of various electrical panels, ensuring they meet specified standards and requirements.- Wiring and Installation: You will handle wiring jobs for electrical panels, installing them in accordance with safety regulations and operational standards.The ideal candidate should have a diploma in electrical engineering, with a focus on practical skills in PLC and VFD panels. Since this is an office-based position, fieldwork is expected, requiring your availability for installation tasks. Familiarity with electrical systems and wiring is advantageous.Additional expectations include strong attention to detail, the ability to troubleshoot electrical issues, and effective communication skills. You should also be prepared to use provided tools and equipment, including laptops for design and documentation purposes. The working schedule consists of standard office hours from Monday to Friday, with weekends off. The successful candidate will have opportunities to gain hands-on experience in a dynamic work environment.
View all details
  • 0 - 6 yrs
  • 30.0 Lac/Yr
  • Ahmedabad
Aircraft Maintenance Aircraft Engineer Aircraft Maintenance Engineer Aircraft Maintenance Technician Aircraft Mechanic Aircraft Technician Avionics Avionics Technician Avionics Engineer Aviation Trainer Aviation Electrical Engineer Echanical Mechanical Engineer Aviation Engineer Aerospace Engineer Aerospace Engineering Aerospace Aeronautical Engineer Aeronautical
Job SummaryAn Aircraft Maintenance Engineer (AME) is responsible for inspecting, maintaining, repairing, troubleshooting, and certifying aircraft to ensure they are safe, airworthy, and compliant with aviation regulations. The role involves carrying out scheduled and unscheduled maintenance on aircraft systems, engines, avionics, electrical components, hydraulic systems, landing gear, and structural components while adhering to the standards established by aviation authorities.Key ResponsibilitiesAircraft Inspection & MaintenancePerform routine, preventive, scheduled, and unscheduled aircraft maintenance.Conduct daily, transit, weekly, A-check, B-check, C-check, and heavy maintenance inspections.Inspect aircraft structures, fuselage, wings, landing gear, flight controls, and engines.Diagnose and rectify aircraft defects using approved maintenance procedures.Replace, repair, and overhaul defective aircraft components.Ensure all maintenance tasks are completed according to the Aircraft Maintenance Manual (AMM).Troubleshooting & RepairsIdentify mechanical, hydraulic, electrical, pneumatic, and avionics faults.Use specialized diagnostic tools and testing equipment.Repair aircraft systems while maintaining manufacturer specifications.Coordinate with engineering teams for complex technical issues.Perform functional tests after repairs to verify serviceability.Engine & Component MaintenanceInspect aircraft engines for wear, leaks, corrosion, and damage.Perform engine servicing, oil changes, filter replacement, and component inspections.Maintain propellers, Auxiliary Power Units (APU), and fuel systems.Monitor engine performance and recommend corrective actions.Avionics & Electrical SystemsInspect communication and navigation systems.Maintain radar, autopilot, cockpit instrumentation, and electrical wiring.Test aircraft electronic systems for operational reliability.Ensure compliance with avionics maintenance procedures.Documentation & ComplianceComplete maintenance logs, inspection reports, and defect records.Maintain aircraft technical documentation accurately.Ensure compliance with aviation regulatory authorities.Certify aircraft for return to service after maintenance (where appropriately licensed).Follow company maintenance policies and quality assurance procedures.Safety & Quality AssuranceFollow all aviation safety regulations and standard operating procedures.Maintain clean and organized work areas.Ensure proper use of Personal Protective Equipment (PPE).Report safety hazards and technical discrepancies immediately.Participate in safety audits and quality inspections.Team CoordinationWork closely with pilots, technicians, quality inspectors, and operations staff.Coordinate maintenance schedules with flight operations.Assist junior technicians with technical guidance and training.Participate in emergency aircraft recovery and AOG (Aircraft on Ground) support.Required QualificationsDiploma or Bachelor's Degree in Aircraft Maintenance Engineering, Aeronautical Engineering, Mechanical Engineering, or Aerospace Engineering.DGCA-approved AME qualification or equivalent aviation authority certification is preferred.Valid Aircraft Maintenance Engineer License (where applicable).Type rating on specific aircraft is an advantage.Relevant experience in aircraft maintenance is preferred.Required SkillsStrong knowledge of aircraft systems and maintenance procedures.Excellent troubleshooting and fault diagnosis skills.Knowledge of aviation regulations and airworthiness standards.Ability to interpret aircraft maintenance manuals and engineering drawings.Strong analytical and problem-solving abilities.Excellent attention to detail.Good communication and teamwork skills.Ability to work under pressure and meet strict deadlines.Computer proficiency in maintenance management software.Good technical documentation skills.Technical KnowledgeAircraft StructuresGas Turbine EnginesHydraulic SystemsPneumatic SystemsElectrical SystemsAvionics SystemsFlight Control SystemsLanding Gear SystemsFuel SystemsAircraft DocumentationMaintenance PlanningAircraft Safety StandardsPreferred CertificationsDGCA Aircraft Maintenance Engineer LicenseEASA Part-66 License (preferred internationally)ICAO-compliant aviation trainingHuman Factors TrainingSafety Management System (SMS) TrainingFuel Tank Safety TrainingEWIS (Electrical Wiring Interconnection System) TrainingAircraft Type Rating CertificationWorking ConditionsAirport hangars, maintenance bases, and line maintenance stations.Rotational shifts including nights, weekends, and public holidays.Outdoor work in varying weather conditions.Physically demanding work involving standing, climbing, bending, and lifting equipment.Exposure to aircraft noise, fuels, lubricants, and hydraulic fluids while following strict safety procedures.Salary Range (India)Fresher: 3.5 - 6 LPA2-5 Years: 6 - 10 LPA5-10 Years: 10 - 18 LPALicensed/Type-Rated AME: 15 - 30+ LPA (depending on airline, aircraft type, and experience)
View all details
  • 0 - 6 yrs
  • 30.0 Lac/Yr
  • Chennai
Aircraft Maintenance Aircraft Engineer Aircraft Maintenance Engineer Aircraft Maintenance Technician Aircraft Mechanic Aircraft Technician Avionics Avionics Technician Avionics Engineer Aviation Trainer Aviation Electrical Engineer Echanical Mechanical Engineer Aviation Engineer Aerospace Engineer Aerospace Engineering Aerospace Aeronautical Engineer Aeronautical
Job SummaryAn Aircraft Maintenance Engineer (AME) is responsible for inspecting, maintaining, repairing, troubleshooting, and certifying aircraft to ensure they are safe, airworthy, and compliant with aviation regulations. The role involves carrying out scheduled and unscheduled maintenance on aircraft systems, engines, avionics, electrical components, hydraulic systems, landing gear, and structural components while adhering to the standards established by aviation authorities.Key ResponsibilitiesAircraft Inspection & MaintenancePerform routine, preventive, scheduled, and unscheduled aircraft maintenance.Conduct daily, transit, weekly, A-check, B-check, C-check, and heavy maintenance inspections.Inspect aircraft structures, fuselage, wings, landing gear, flight controls, and engines.Diagnose and rectify aircraft defects using approved maintenance procedures.Replace, repair, and overhaul defective aircraft components.Ensure all maintenance tasks are completed according to the Aircraft Maintenance Manual (AMM).Troubleshooting & RepairsIdentify mechanical, hydraulic, electrical, pneumatic, and avionics faults.Use specialized diagnostic tools and testing equipment.Repair aircraft systems while maintaining manufacturer specifications.Coordinate with engineering teams for complex technical issues.Perform functional tests after repairs to verify serviceability.Engine & Component MaintenanceInspect aircraft engines for wear, leaks, corrosion, and damage.Perform engine servicing, oil changes, filter replacement, and component inspections.Maintain propellers, Auxiliary Power Units (APU), and fuel systems.Monitor engine performance and recommend corrective actions.Avionics & Electrical SystemsInspect communication and navigation systems.Maintain radar, autopilot, cockpit instrumentation, and electrical wiring.Test aircraft electronic systems for operational reliability.Ensure compliance with avionics maintenance procedures.Documentation & ComplianceComplete maintenance logs, inspection reports, and defect records.Maintain aircraft technical documentation accurately.Ensure compliance with aviation regulatory authorities.Certify aircraft for return to service after maintenance (where appropriately licensed).Follow company maintenance policies and quality assurance procedures.Safety & Quality AssuranceFollow all aviation safety regulations and standard operating procedures.Maintain clean and organized work areas.Ensure proper use of Personal Protective Equipment (PPE).Report safety hazards and technical discrepancies immediately.Participate in safety audits and quality inspections.Team CoordinationWork closely with pilots, technicians, quality inspectors, and operations staff.Coordinate maintenance schedules with flight operations.Assist junior technicians with technical guidance and training.Participate in emergency aircraft recovery and AOG (Aircraft on Ground) support.Required QualificationsDiploma or Bachelor's Degree in Aircraft Maintenance Engineering, Aeronautical Engineering, Mechanical Engineering, or Aerospace Engineering.DGCA-approved AME qualification or equivalent aviation authority certification is preferred.Valid Aircraft Maintenance Engineer License (where applicable).Type rating on specific aircraft is an advantage.Relevant experience in aircraft maintenance is preferred.Required SkillsStrong knowledge of aircraft systems and maintenance procedures.Excellent troubleshooting and fault diagnosis skills.Knowledge of aviation regulations and airworthiness standards.Ability to interpret aircraft maintenance manuals and engineering drawings.Strong analytical and problem-solving abilities.Excellent attention to detail.Good communication and teamwork skills.Ability to work under pressure and meet strict deadlines.Computer proficiency in maintenance management software.Good technical documentation skills.Technical KnowledgeAircraft StructuresGas Turbine EnginesHydraulic SystemsPneumatic SystemsElectrical SystemsAvionics SystemsFlight Control SystemsLanding Gear SystemsFuel SystemsAircraft DocumentationMaintenance PlanningAircraft Safety StandardsPreferred CertificationsDGCA Aircraft Maintenance Engineer LicenseEASA Part-66 License (preferred internationally)ICAO-compliant aviation trainingHuman Factors TrainingSafety Management System (SMS) TrainingFuel Tank Safety TrainingEWIS (Electrical Wiring Interconnection System) TrainingAircraft Type Rating CertificationWorking ConditionsAirport hangars, maintenance bases, and line maintenance stations.Rotational shifts including nights, weekends, and public holidays.Outdoor work in varying weather conditions.Physically demanding work involving standing, climbing, bending, and lifting equipment.Exposure to aircraft noise, fuels, lubricants, and hydraulic fluids while following strict safety procedures.Salary Range (India)Fresher: 3.5 - 6 LPA2-5 Years: 6 - 10 LPA5-10 Years: 10 - 18 LPALicensed/Type-Rated AME: 15 - 30+ LPA (depending on airline, aircraft type, and experience)
View all details
  • 0 - 6 yrs
  • 30.0 Lac/Yr
  • Hyderabad
Aircraft Maintenance Aircraft Mechanic Aircraft Technician Aircraft Engineer Aircraft Maintenance Engineer Aircraft Maintenance Engineering Aerospace Aerospace Engineer Aerospace Engineering Avionics Avionics Technician Avionics Engineer Aeronautical Aeronautical Engineer Aeronautical Engineering
An Aircraft Maintenance Engineer (AME) is responsible for inspecting, maintaining, repairing, troubleshooting, and certifying aircraft to ensure they are safe, airworthy, and compliant with aviation regulations. The role involves carrying out scheduled and unscheduled maintenance on aircraft systems, engines, avionics, electrical components, hydraulic systems, landing gear, and structural components while adhering to the standards established by aviation authorities.Key ResponsibilitiesAircraft Inspection & MaintenancePerform routine, preventive, scheduled, and unscheduled aircraft maintenance.Conduct daily, transit, weekly, A-check, B-check, C-check, and heavy maintenance inspections.Inspect aircraft structures, fuselage, wings, landing gear, flight controls, and engines.Diagnose and rectify aircraft defects using approved maintenance procedures.Replace, repair, and overhaul defective aircraft components.Ensure all maintenance tasks are completed according to the Aircraft Maintenance Manual (AMM).Troubleshooting & RepairsIdentify mechanical, hydraulic, electrical, pneumatic, and avionics faults.Use specialized diagnostic tools and testing equipment.Repair aircraft systems while maintaining manufacturer specifications.Coordinate with engineering teams for complex technical issues.Perform functional tests after repairs to verify serviceability.Engine & Component MaintenanceInspect aircraft engines for wear, leaks, corrosion, and damage.Perform engine servicing, oil changes, filter replacement, and component inspections.Maintain propellers, Auxiliary Power Units (APU), and fuel systems.Monitor engine performance and recommend corrective actions.Avionics & Electrical SystemsInspect communication and navigation systems.Maintain radar, autopilot, cockpit instrumentation, and electrical wiring.Test aircraft electronic systems for operational reliability.Ensure compliance with avionics maintenance procedures.Documentation & ComplianceComplete maintenance logs, inspection reports, and defect records.Maintain aircraft technical documentation accurately.Ensure compliance with aviation regulatory authorities.Certify aircraft for return to service after maintenance (where appropriately licensed).Follow company maintenance policies and quality assurance procedures.Safety & Quality AssuranceFollow all aviation safety regulations and standard operating procedures.Maintain clean and organized work areas.Ensure proper use of Personal Protective Equipment (PPE).Report safety hazards and technical discrepancies immediately.Participate in safety audits and quality inspections.Team CoordinationWork closely with pilots, technicians, quality inspectors, and operations staff.Coordinate maintenance schedules with flight operations.Assist junior technicians with technical guidance and training.Participate in emergency aircraft recovery and AOG (Aircraft on Ground) support.Required QualificationsDiploma or Bachelor's Degree in Aircraft Maintenance Engineering, Aeronautical Engineering, Mechanical Engineering, or Aerospace Engineering.DGCA-approved AME qualification or equivalent aviation authority certification is preferred.Valid Aircraft Maintenance Engineer License (where applicable).Type rating on specific aircraft is an advantage.Relevant experience in aircraft maintenance is preferred.Required SkillsStrong knowledge of aircraft systems and maintenance procedures.Excellent troubleshooting and fault diagnosis skills.Knowledge of aviation regulations and airworthiness standards.Ability to interpret aircraft maintenance manuals and engineering drawings.Strong analytical and problem-solving abilities.Excellent attention to detail.Good communication and teamwork skills.Ability to work under pressure and meet strict deadlines.Computer proficiency in maintenance management software.Good technical documentation skills.Technical KnowledgeAircraft StructuresGas Turbine EnginesHydraulic SystemsPneumatic SystemsElectrical SystemsAvionics SystemsFlight Control SystemsLanding Gear SystemsFuel SystemsAircraft DocumentationMaintenance PlanningAircraft Safety StandardsPreferred CertificationsDGCA Aircraft Maintenance Engineer LicenseEASA Part-66 License (preferred internationally)ICAO-compliant aviation trainingHuman Factors TrainingSafety Management System (SMS) TrainingFuel Tank Safety TrainingEWIS (Electrical Wiring Interconnection System) TrainingAircraft Type Rating CertificationWorking ConditionsAirport hangars, maintenance bases, and line maintenance stations.Rotational shifts including nights, weekends, and public holidays.Outdoor work in varying weather conditions.Physically demanding work involving standing, climbing, bending, and lifting equipment.Exposure to aircraft noise, fuels, lubricants, and hydraulic fluids while following strict safety procedures.Salary Range (India)Fresher: 3.5 - 6 LPA2-5 Years: 6 - 10 LPA5-10 Years: 10 - 18 LPALicensed/Type-Rated AME: 15 - 30+ LPA (depending on airline, aircraft type, and experience)
View all details
View More Jobs