Engineering Fresher Jobs in Bangalore

An Aircraft Maintenance Engineer (AME) is responsible for inspecting, maintaining, repairing, troubleshooting, and certifying aircraft to ensure they are safe, airworthy, and compliant with aviation regulations. The role involves carrying out scheduled and unscheduled maintenance on aircraft systems, engines, avionics, electrical components, hydraulic systems, landing gear, and structural components while adhering to the standards established by aviation authorities.Key ResponsibilitiesAircraft Inspection & MaintenancePerform routine, preventive, scheduled, and unscheduled aircraft maintenance.Conduct daily, transit, weekly, A-check, B-check, C-check, and heavy maintenance inspections.Inspect aircraft structures, fuselage, wings, landing gear, flight controls, and engines.Diagnose and rectify aircraft defects using approved maintenance procedures.Replace, repair, and overhaul defective aircraft components.Ensure all maintenance tasks are completed according to the Aircraft Maintenance Manual (AMM).Troubleshooting & RepairsIdentify mechanical, hydraulic, electrical, pneumatic, and avionics faults.Use specialized diagnostic tools and testing equipment.Repair aircraft systems while maintaining manufacturer specifications.Coordinate with engineering teams for complex technical issues.Perform functional tests after repairs to verify serviceability.Engine & Component MaintenanceInspect aircraft engines for wear, leaks, corrosion, and damage.Perform engine servicing, oil changes, filter replacement, and component inspections.Maintain propellers, Auxiliary Power Units (APU), and fuel systems.Monitor engine performance and recommend corrective actions.Avionics & Electrical SystemsInspect communication and navigation systems.Maintain radar, autopilot, cockpit instrumentation, and electrical wiring.Test aircraft electronic systems for operational reliability.Ensure compliance with avionics maintenance procedures.Documentation & ComplianceComplete maintenance logs, inspection reports, and defect records.Maintain aircraft technical documentation accurately.Ensure compliance with aviation regulatory authorities.Certify aircraft for return to service after maintenance (where appropriately licensed).Follow company maintenance policies and quality assurance procedures.Safety & Quality AssuranceFollow all aviation safety regulations and standard operating procedures.Maintain clean and organized work areas.Ensure proper use of Personal Protective Equipment (PPE).Report safety hazards and technical discrepancies immediately.Participate in safety audits and quality inspections.Team CoordinationWork closely with pilots, technicians, quality inspectors, and operations staff.Coordinate maintenance schedules with flight operations.Assist junior technicians with technical guidance and training.Participate in emergency aircraft recovery and AOG (Aircraft on Ground) support.Required QualificationsDiploma or Bachelor's Degree in Aircraft Maintenance Engineering, Aeronautical Engineering, Mechanical Engineering, or Aerospace Engineering.DGCA-approved AME qualification or equivalent aviation authority certification is preferred.Valid Aircraft Maintenance Engineer License (where applicable).Type rating on specific aircraft is an advantage.Relevant experience in aircraft maintenance is preferred.Required SkillsStrong knowledge of aircraft systems and maintenance procedures.Excellent troubleshooting and fault diagnosis skills.Knowledge of aviation regulations and airworthiness standards.Ability to interpret aircraft maintenance manuals and engineering drawings.Strong analytical and problem-solving abilities.Excellent attention to detail.Good communication and teamwork skills.Ability to work under pressure and meet strict deadlines.Computer proficiency in maintenance management software.Good technical documentation skills.Technical KnowledgeAircraft StructuresGas Turbine EnginesHydraulic SystemsPneumatic SystemsElectrical SystemsAvionics SystemsFlight Control SystemsLanding Gear SystemsFuel SystemsAircraft DocumentationMaintenance PlanningAircraft Safety StandardsPreferred CertificationsDGCA Aircraft Maintenance Engineer LicenseEASA Part-66 License (preferred internationally)ICAO-compliant aviation trainingHuman Factors TrainingSafety Management System (SMS) TrainingFuel Tank Safety TrainingEWIS (Electrical Wiring Interconnection System) TrainingAircraft Type Rating CertificationWorking ConditionsAirport hangars, maintenance bases, and line maintenance stations.Rotational shifts including nights, weekends, and public holidays.Outdoor work in varying weather conditions.Physically demanding work involving standing, climbing, bending, and lifting equipment.Exposure to aircraft noise, fuels, lubricants, and hydraulic fluids while following strict safety procedures.Salary Range (India)Fresher: 3.5 - 6 LPA2-5 Years: 6 - 10 LPA5-10 Years: 10 - 18 LPALicensed/Type-Rated AME: 15 - 30+ LPA (depending on airline, aircraft type, and experience)

We are looking for a part-time Data Processing Engineer to join our team. This role is perfect for recent graduates or those with a background in data management. The position allows you to work from home, providing flexibility while you gain valuable experience in the field. Key responsibilities include:1. Data Entry: Accurately input and update data in various systems to maintain up-to-date records. This involves checking for errors and ensuring that all information is precise.2. Data Cleaning: Identify and correct inaccuracies in the existing data sets. This ensures that our data is reliable and ready for analysis.3. Data Analysis Support: Assist in processing and analyzing data to help our team improve workflows and make informed decisions. You will work with various tools and software to help interpret the data.4. Report Generation: Create simple reports based on the processed data to provide insights and support team projects. This may include summarizing findings and presenting them clearly.Required skills and expectations include:- Basic knowledge of data processing and management concepts.- Strong attention to detail for ensuring data accuracy and reliability.- Proficiency in using computer systems and software, particularly spreadsheets.- Good communication skills to work effectively with the team and convey findings.- A proactive attitude and willingness to learn about data analysis and processing techniques. Ideal candidates are self-motivated individuals eager to grow their skills in data handling and processing.

We are seeking a motivated Software Engineer to join our team in Bangalore. This full-time position is suitable for recent graduates and is open to female candidates. The ideal candidate will have a passion for technology and a desire to learn and grow in a collaborative environment.Key Responsibilities:1. Software Development: Design, develop, and test high-quality software solutions. You will work on coding tasks and contribute to application development, ensuring functionality and performance.2. Collaboration: Work closely with team members, including designers and other engineers, to understand project requirements. Effective communication is essential to facilitate teamwork and deliver successful projects.3. Debugging and Troubleshooting: Identify and resolve software defects within applications. This involves testing and analyzing code to ensure reliability and efficiency in the software.4. Documentation: Create and maintain technical documentation for software components. Clear documentation helps keep records of the work done and assists team members in understanding the software architecture.Required Skills and Expectations:Candidates should possess a Bachelor Degree

We are seeking a motivated Field Service Engineer to join our team in Bangalore. This entry-level position is ideal for candidates with an I.T.I. qualification who are eager to start their careers in the engineering field. The role involves ensuring that equipment is installed and maintained to meet customer satisfaction.Key Responsibilities:1. Installation and Setup: You will be responsible for setting up and installing equipment at client locations, ensuring everything is operational and meets quality standards.2. Maintenance and Repair: Conduct regular maintenance checks and perform necessary repairs on equipment to prevent malfunctions and extend the lifespan of devices.3. Customer Support: Provide excellent customer service, addressing any technical issues and answering client queries to ensure a smooth experience.4. Documentation: Maintain accurate records of service operations, including installation details and maintenance logs, to keep track of all activities.5. Collaboration: Work closely with your team and other departments to ensure that service goals and customer expectations are met.Required Skills and Expectations:Candidates should possess strong problem-solving abilities and technical skills related to equipment maintenance. Good communication skills are essential for interacting with clients and addressing their needs effectively. A willingness to learn and adapt to new technologies is important, as is the ability to work as part of a team. A clean driving record and readiness to travel for field service tasks may also be required.

We are looking for a Civil Site Supervisor to oversee construction projects in Bangalore. The ideal candidate will have a diploma in civil engineering and will work on-site to ensure the successful completion of projects, focusing on quality and safety.TO APPLY VISIT BHADANIS QUANTITY SURVEYING WEBSITEThe main responsibilities include supervising the daily operations on the construction site, ensuring that work is carried out according to plans and specifications. You will also coordinate with different teams to facilitate the project flow and solve any on-site issues. Monitoring work progress and quality is essential, as is keeping detailed records of daily activities. Furthermore, you will be responsible for ensuring compliance with safety regulations and maintaining a safe work environment for all employees.Candidates should have strong communication skills to effectively interact with workers, engineers, and project managers. Attention to detail is crucial in maintaining quality standards and ensuring that the work aligns with project specifications. You should be able to read and interpret blueprints and technical drawings, as this will help in coordinating construction activities effectively. A proactive approach to problem-solving and the ability to work under pressure will also be advantageous. We welcome applications from individuals with 0 to 6 years of experience willing to learn and grow in the construction field. A commitment to safety and quality is vital in this role.

Provide on-site support for POS, hardware, software, and networking issues.Install and configure POS machines, switches, routers, printers, laptops, desktops, andperipherals.Install Windows OS and troubleshoot basic Windows/Linux issues.Troubleshoot printers, barcode scanners, receipt printers, cash drawers, and other POSperipherals.Diagnose hardware, software, network, connectivity, and power-related issues.Perform basic LAN, Wi-Fi, IP, and network troubleshooting.Lay, crimp, terminate, and patch Ethernet/network cables.Test systems after installation or repair.Respond to service requests and coordinate with internal teams when required.Maintain service records and complete assigned requests within timelines.Travel to client locations as required.

As an Aircraft Maintenance Engineer, you will play a vital role in ensuring the safety and reliability of aircraft. You will be responsible for performing maintenance, repairs, and inspections on various aircraft systems. Key Responsibilities:- Conduct Routine Inspections: Regularly check aircraft systems, engines, and structures to ensure they meet safety standards and operational requirements.- Perform Repairs: Diagnose and fix issues with aircraft components such as engines, electrical systems, and landing gear to maintain high operational performance.- Documentation: Maintain accurate records of all maintenance activities and inspections performed to comply with aviation regulations and standards.- Collaborate with Team: Work closely with other engineers and technicians to share knowledge and ensure that all maintenance tasks are completed efficiently and safely.- Adhere to Safety Regulations: Follow all safety protocols and guidelines to maintain a safe working environment for yourself and your colleagues.Required Skills and Expectations:A good candidate should have a keen attention to detail, as accuracy is critical in aviation. Effective communication and teamwork skills are essential to work well with other professionals in the field. The ability to problem-solve quickly and efficiently is important, especially when dealing with unexpected issues. Basic technical knowledge of aviation systems and a strong commitment to safety and compliance with regulations are crucial. Candidates with a background in engineering or a strong interest in aircraft maintenance will find this position rewarding.

We are looking for a motivated and enthusiastic Civil Engineer Trainee to join our team in Bangalore, India, Karnataka . This internship position is perfect for recent graduates who want to gain hands-on experience in the civil engineering field.CERTIFICATIONS: -NICMAR,RICS, BHADANIS ,IIT TRAINING CERTIFICATE PREFERREDKey Responsibilities:1. Assisting in Project Design: Work under senior engineers to assist in designing structures, roads, and other civil engineering projects using software tools like AutoCAD.2. Site Visits: Participate in site visits to monitor project progress and report on site conditions, ensuring that work adheres to safety and quality standards.3. Preparing Reports: Help in preparing detailed reports and documentation related to project developments, which include measurements, materials used, and project timelines.4. Supporting Field Surveys: Collaborate with survey teams to carry out field surveys and gather data that will be used for planning and design purposes.5. Learning and Development: Engage in training sessions and workshops to enhance your knowledge of civil engineering principles, materials, and construction practices.Required Skills and Expectations:The ideal candidate should have a degree in civil engineering or a related field and possess strong analytical and problem-solving skills. Good communication abilities are essential for collaborating with team members and stakeholders. A basic understanding of excel software is beneficial. Candidates should show eagerness to learn, adapt to new challenges, and apply engineering concepts effectively in real-world scenarios. A proactive attitude and attention to detail will contribute significantly to successful project outcomes.CERTIFICATIONS: -NICMAR,RICS, BHADANIS ,IIT TRAINING CERTIFICATE PREFERRED

We are seeking a dedicated Executive Civil Engineer to join our team in Bangalore, India, Karnataka . This role is ideal for recent graduates or those with up to six years of experience in civil engineering.CERTIFICATIONS: -NICMAR,RICS, BHADANIS ,IIT TRAINING CERTIFICATE PREFERREDKey Responsibilities:1. Project Design: You will assist in the design of civil engineering projects, ensuring they meet technical specifications and safety regulations.2. Site Supervision: You will oversee construction sites, ensuring that work is carried out according to plans and quality standards.3. Collaboration: You will work closely with architects, contractors, and other engineers to coordinate project activities and address challenges.4. Quality Control: Regularly inspect materials and workmanship on site to ensure compliance with project standards.5. Documentation: You will maintain accurate records of project progress, including reports and daily logs, ensuring complete transparency and accountability.Required Skills and Expectations:Candidates should possess a degree in civil engineering and preferably have experience in construction or project management. Strong analytical skills and attention to detail are essential for evaluating projects effectively. Good communication skills are necessary for collaborating with team members and stakeholders. The ideal candidate should be proactive, able to work under pressure, and committed to delivering high-quality results on time. Flexibility and a willingness to learn new technologies in civil engineering will be crucial to your success in this role.CERTIFICATIONS: -NICMAR,RICS, BHADANIS ,IIT TRAINING CERTIFICATE PREFERRED

We are seeking a motivated Trainee Civil Engineer to join our team in Bangalore. This internship is a great opportunity for fresh graduates to gain hands-on experience in the civil engineering field.VISIT BHADANIS QUANTITY SURVEYING WEBSITEKey Responsibilities:VISIT BHADANIS QUANTITY SURVEYING WEBSITE 1. Project Quantity Surveying: QS & Estimation , Billing ,Planning , Tendering , Contracts , Cost Control Budgeting Online Course For Civil Engineers & Mep Engineers Mechanical Engineers1. Assisting in Project Planning: You will support senior engineers in preparing project plans, understanding specifications, and helping to create schedules for various construction activities.2. Site Visits: You will accompany experienced engineers on site visits to observe and learn about the construction process, safety protocols, and quality control measures.3. Data Collection and Analysis: You will help collect data related to materials, costs, and progress and assist in analyzing this data to ensure projects are on track and within budget.4. Documentation: You will assist in maintaining project documentation, including drawings, reports, and meeting notes, which are essential for effective communication among team members.5. Learning Engineering Software: You will have the opportunity to learn and use engineering software tools commonly used in the industry, which will aid your technical skills development.Required Skills and Expectations:Candidates should possess a degree in Civil Engineering and demonstrate a keen interest in the field. Strong analytical and problem-solving skills are essential, along with the ability to work collaboratively in a team. Good communication skills are important for interacting with colleagues and clients. An eagerness to learn and adapt in a fast-paced environment is highly valued.

Job Openings for 12 MEP Engineer Jobs for Freshers in Mumbai, Pune, Kolkata, Hyderabad, Bangalore, Chennai, Ahmedabad, Trivandrum/Thiruvananthapuram, Vijayawada, having Educational qualification of : B.E, B.Tech with Good knowledge in MEP Engineer, MEP Estimation Engineer, MEP, Revit MEP, MEP Manager, MEP Supervisor, MEP Quantity Surveyor, Quantity Estimation, Site Engineer, Hvac Engineer, Plumbing etc.

As an Aircraft Engineer, you will play a vital role in ensuring the safety and performance of aircraft. Your primary responsibilities will include:- Aircraft Maintenance: Conduct regular inspections and maintenance checks on aircraft to ensure they are safe and fully operational, following industry standards and regulations.- Troubleshooting and Repair: Identify and fix technical issues and malfunctions in aircraft systems, ensuring timely repairs to avoid delays in operations.- Documentation: Maintain accurate records of inspections, repairs, and maintenance activities, which are crucial for compliance and safety audits.- Collaboration: Work closely with other engineers and maintenance staff to share knowledge and improve processes, enhancing overall efficiency in the workplace.- Continuous Learning: Stay updated with industry developments and new technologies related to aircraft systems, ensuring that your skills and knowledge remain relevant.To succeed in this role, you should have:- A background in aviation or engineering, ideally with relevant coursework or training.- Strong problem-solving skills and the ability to think critically under pressure.- Good attention to detail to ensure precision in maintenance and repairs.- Effective communication skills to relay technical information clearly to team members.- A commitment to safety, quality, and adherence to regulatory standards.This role is suitable for individuals with 0 to 6 years of experience who have completed at least their 12th grade education. You will be required to work from the office in Bangalore, collaborating with your team daily.

We are looking for 43 Urgent Vacancy For Fire Safety Officers Posts in Jammu, Srinagar, Jamshedpur, Ranchi, Belagavi, Bellary, Mangalore, Bidar, Gulbarga, Hubli, with deep knowledge in Help Desk Executive, receptionist, Airport Passenger Service Associate, Passenger Handling, Guest Relations, Customer Relationship, fire and Required Educational Qualification is : Secondary School, Vocational Course, Diploma, B.C.A, B.Com, Bachelor of Hotel Management, B.Sc, Other Bachelor Degree, Any Master Degree

Job Openings for 61 Jobs available in Software Engineer at multiple locations Jobs for Freshers in Mumbai, Chennai, Hyderabad, Bangalore, Indore, Pune, Jaipur, Patna, Gurgaon, Surat, having Educational qualification of : B.C.A, B.E, B.Tech, Other Bachelor Degree, Post Graduate Diploma, M.C.A, M.Tech, Any Master Degree with Good knowledge in Software Engineer, Software Product Engineer, Software Quality Engineer, Software Analyst, Software Developer, Software Architect, Software Designer, Coding Analyst, Quality Assurance Testing Engineer, Software Project Management etc.

An Aircraft Technician is responsible for inspecting, maintaining, repairing, and testing aircraft systems and components to ensure safe and efficient aircraft operations. The technician works on mechanical, electrical, hydraulic, pneumatic, and avionics systems according to aviation safety standards and regulatory requirements.Aircraft Technicians perform scheduled maintenance, troubleshoot technical faults, replace defective parts, and certify aircraft readiness for flight under the supervision of licensed engineers when required.Key ResponsibilitiesAircraft Inspection & MaintenancePerform routine and scheduled aircraft maintenance checks.Inspect aircraft structures, engines, landing gear, and control systems.Conduct pre-flight, transit, daily, weekly, and periodic inspections.Identify defects, malfunctions, and mechanical issues.Repair & TroubleshootingDiagnose technical and mechanical faults in aircraft systems.Repair or replace damaged aircraft components and parts.Troubleshoot hydraulic, pneumatic, fuel, electrical, and engine systems.Use specialized testing and diagnostic equipment.Component InstallationInstall aircraft parts, instruments, wiring, and assemblies.Remove and replace aircraft engines or system components when required.Ensure all installations comply with aviation safety standards.Documentation & ReportingMaintain accurate maintenance logs and technical records.Complete inspection reports and work orders.Record all repairs, replacements, and maintenance activities.Ensure compliance with aviation authority regulations.Safety ComplianceFollow aviation safety procedures and maintenance manuals.Adhere to company policies and international aviation regulations.Ensure tools and equipment are properly calibrated and maintained.Maintain a clean and safe working environment.Team CoordinationWork closely with Aircraft Maintenance Engineers, pilots, and ground staff.Coordinate with technical supervisors and quality assurance teams.Assist during aircraft turnaround operations.Types of Aircraft Systems HandledAircraft EnginesHydraulic SystemsElectrical SystemsFuel SystemsBrake SystemsPneumatic SystemsLanding GearFlight Control SystemsCabin SystemsAvionics EquipmentRequired SkillsStrong mechanical and technical knowledgeTroubleshooting and problem-solving abilityKnowledge of aircraft systems and maintenance proceduresAbility to read technical manuals and engineering drawingsAttention to detail and accuracyGood communication and teamwork skillsTime management and multitasking abilitiesSafety awareness and compliance knowledgeEducational QualificationsDiploma or Degree in Aircraft Maintenance Engineering, Aeronautical Engineering, or Aerospace EngineeringAME (Aircraft Maintenance Engineering) certification preferredDGCA/FAA/EASA-approved training is an advantageTechnical vocational training in aviation maintenance may also be acceptedExperience RequirementsFresherBasic knowledge of aircraft maintenance proceduresInternship or training experience preferredExperienced Technician1-5+ years of aircraft maintenance experienceExperience on commercial or private aircraftFamiliarity with aviation maintenance software and toolsCertifications PreferredDGCA AME LicenseFAA A&P LicenseEASA Part-66 LicenseHuman Factors & Safety TrainingFuel Tank Safety CertificationAviation Safety Management TrainingWorking EnvironmentAirportsAircraft hangarsMaintenance workshopsAviation maintenance organizations (MRO)Airlines and private aviation companiesAircraft Technicians may work:Rotational shiftsNight shiftsWeekends and holidaysIn noisy and physically demanding environmentsPhysical RequirementsAbility to stand for long hoursClimb ladders and work at heightsLift heavy aircraft parts and toolsWork in confined spacesGood hand-eye coordination and physical fitnessSalary Range (Approx.)IndiaFresher: 20,000 - 35,000 per monthExperienced: 40,000 - 1,20,000+ per month

We are looking for a motivated Data Processing Engineer to join our team. This part-time position is ideal for freshers who are eager to learn and grow in a data-driven environment. The role involves processing and managing data from various sources while ensuring accuracy and efficiency.Key Responsibilities:1. Data Input and Management: Accurately input and organize data using spreadsheets and databases, ensuring that all information is up-to-date and correctly formatted.2. Data Quality Assurance: Review and verify the integrity of data to identify errors or inconsistencies. This includes cross-referencing data with original sources to maintain high standards of quality.3. Collaborative Support: Work closely with team members to assist in data-related projects, understanding specific requirements and providing necessary updates.4. Learning and Development: Participate in training sessions and stay informed about data processing tools and technologies to enhance your skills and improve work efficiency.

As a Data Processing Engineer, you will be responsible for handling and organizing data efficiently. This part-time role allows you to work from home, making it ideal for freshers who are eager to begin their career in data management.Key Responsibilities:- Data Collection and Input: You will gather data from various sources and ensure it is entered accurately into our systems. Attention to detail is crucial to maintain data integrity.- Data Cleaning: Your role involves reviewing data for errors and inconsistencies. You will correct any inaccuracies to ensure that the data is reliable and useful.- Data Analysis: You will assist in analyzing data to identify trends and patterns. This involves using basic analytical tools to interpret the data and provide insights.- Reporting: You will prepare simple reports based on the processed data. Clear communication is important as you will share findings with the team.Required Skills and Expectations:Candidates should have a basic understanding of data management processes. Proficiency in Microsoft Excel or similar software is preferred, as you will use these tools for data entry and analysis. Strong attention to detail, analytical thinking, and good communication skills are essential for success in this role. A willingness to learn and adapt in a fast-paced environment will be valued. You should also be comfortable working independently and managing your time effectively while meeting deadlines.

We are looking for a Data Processing Engineer to join our team in Electronic City, Bangalore. This part-time, remote position is perfect for freshers who have completed at least their 10th grade. You will help us manage and process data efficiently to support our projects.Key Responsibilities:1. Data Entry: Accurately input data into our systems. You will ensure that all information is correct and up-to-date, which is vital for our operations.2. Data Cleaning: Identify and correct errors or inconsistencies in our data. This involves reviewing datasets to maintain high-quality standards and ensuring our data is reliable.3. Data Organization: Help in organizing raw data into structured formats. This makes it easier for the team to analyze and derive insights from the information.4. Basic Reporting: Assist in generating simple reports based on the processed data. You will summarize findings to support decision-making processes within the team.Required Skills and Expectations:Candidates should have strong attention to detail and good organizational skills to manage data effectively. Basic computer skills and familiarity with spreadsheet software are essential. A willingness to learn and an ability to work independently in a remote environment are also important. Effective communication skills will help you collaborate with team members and understand project needs clearly.

We are looking for a motivated and enthusiastic female Civil Engineer to join our team in Bangalore. This role is open to recent graduates who are eager to apply their knowledge in real-world projects.Key responsibilities include:1. Design and Analysis: You will assist in the design and analysis of civil engineering projects, using software tools to create detailed plans that ensure safety and efficiency.2. Site Inspection: You will perform site inspections to monitor construction activities, ensuring that all work complies with project specifications and local regulations.3. Collaboration: Working closely with other engineers, architects, and construction teams, you will help coordinate efforts and maintain communication to ensure project milestones are met on time.4. Documentation: You will prepare and maintain detailed engineering documentation, reports, and project records to track progress and facilitate project evaluation.5. Problem Solving: You will identify potential issues during the design and construction phases and propose effective solutions to overcome challenges.Required skills and expectations include:- A degree in Civil Engineering or a related field.- Basic knowledge of civil design software like AutoCAD or similar.- Strong analytical skills and attention to detail.- Excellent communication skills, both written and verbal.- A team-oriented mindset with a willingness to learn from experienced engineers.We welcome fresh graduates who are eager to start their careers in civil engineering and contribute positively to our projects.

We are looking for a passionate Machine Learning Engineer to join our team in Bangalore. This is an excellent opportunity for fresh graduates eager to launch their careers in machine learning and data science.Key Responsibilities:1. Model Development: Design and build machine learning models to solve complex problems. You will apply algorithms to data sets and work on optimizing model performance.2. Data Analysis: Analyze large volumes of data to derive insights and trends. You will be responsible for cleaning, processing, and transforming data to make it suitable for modeling.3. Collaboration: Work closely with data scientists, software engineers, and other stakeholders. Your role will involve brainstorming sessions and integrating machine learning solutions within existing systems.4. Continuous Learning: Stay updated with the latest trends and techniques in machine learning. You will be encouraged to learn and implement new algorithms and tools as technology evolves.Required Skills and Expectations:Candidates should hold a graduate degree in a relevant field and be keen to explore the world of machine learning. Proficiency in programming languages such as Python or R is essential. A good understanding of algorithms, statistics, and linear algebra is expected. Strong problem-solving skills and the ability to work independently and collaboratively in a team are important. Ideal candidates will demonstrate a willingness to learn and adapt in a fast-paced environment. This position is exclusively open to female candidates.

We are seeking a motivated and dedicated female Civil Engineer to join our team in Bangalore. This is a full-time position suitable for fresh graduates looking to start their career in civil engineering. The role involves working on a variety of projects, ensuring that they are completed safely, efficiently, and on time.Key Responsibilities:- Project Design: Assist in designing various civil projects, which includes creating plans and specifications that meet required standards and regulations.- Site Inspection: Conduct regular inspections of construction sites to ensure compliance with design specifications and safety guidelines.- Collaboration: Work closely with architects, contractors, and other engineers to ensure smooth project execution and resolve any technical issues that arise.- Documentation: Prepare and maintain accurate project documentation, including reports, plans, and records necessary for project planning and execution.- Quality Control: Monitor the quality of materials and workmanship on-site to ensure that the final output meets specified quality standards.Required Skills and Expectations:- Educational Background: A degree in Civil Engineering or related field is essential.- Technical Skills: Familiarity with engineering software such as AutoCAD or similar tools is preferred.- Communication Skills: Strong verbal and written communication abilities are necessary for effective collaboration with team members and stakeholders.- Problem-Solving Skills: Ability to identify potential issues and develop effective solutions quickly.- Attention to Detail: A keen eye for detail to ensure accuracy in designs and compliance with regulations is crucial. We welcome fresh talent ready to contribute and grow in a dynamic engineering environment.