Draftsman Jobs

As an MEP Site Engineer, your primary role will involve managing and overseeing mechanical, electrical, and plumbing (MEP) works on construction sites to ensure projects are completed efficiently and to the highest standards.**Key Responsibilities:**- **Project Coordination:** Work closely with project managers and other engineers to coordinate MEP activities and ensure alignment with the overall project schedule.- **Site Inspection:** Conduct regular site inspections to verify that MEP installations comply with design specifications and local codes, ensuring safety and quality are maintained.- **Technical Support:** Provide technical assistance and guidance to contractors and subcontractors regarding MEP systems, troubleshooting any issues that may arise during installation.- **Documentation:** Maintain accurate records of MEP work, including progress reports, change orders, and any site modifications, to keep stakeholders informed and uphold project transparency.- **Material Management:** Oversee the procurement and proper usage of MEP materials, ensuring that they meet the required standards and are delivered on time to avoid delays.**Required Skills and Expectations:**Candidates should possess a Bachelors degree in Architecture, Engineering, or an Advanced/Higher Diploma related to MEP systems. A minimum of 1-7 years of relevant experience is expected. Strong analytical and problem-solving skills are essential for diagnosing issues effectively. Good communication skills are required to collaborate effectively with teams and stakeholders. Familiarity with building codes, safety standards, and best practices in the industry is critical. Lastly, proficiency in relevant software tools for designing and managing MEP systems will be advantageous.

Mechanical DraftsmanDesignAutoCad+ SolidworksFreshers/ ExperiencedSal-12 to 20 KNASHIK

Plumbers,Install and Repair Pipes, Drains and Fixtures and Fittings that Supply Water and Gas or Remove Waste.apprentice/trainee Plumbers Usually Start On the Training or Adult Minimum Wage and Can Earn Up to $39 An Hour as They Gain Skills and Unit Standards.newly Licensed Plumbers, Usually Earn $35 to $42 An Hour.licensed and Experienced Plumbers Can Earn Between $45 and $53 An Hour.

We are seeking a skilled MEP Engineer to join our team in Jaipur. The ideal candidate will have 5 to 11 years of experience in Mechanical, Electrical, and Plumbing (MEP) systems, with a strong educational background in Engineering (B.E). This is a full-time position where you will work from the office.**Key Responsibilities:**- **Design and Implementation:** Develop comprehensive designs for MEP systems ensuring they meet project requirements and regulatory standards.- **Coordination:** Collaborate with other engineering teams to ensure smooth integration of MEP systems with architectural and structural designs.- **Project Management:** Supervise MEP projects from planning through execution, ensuring they are completed on time and within budget.- **Quality Control:** Conduct regular inspections of MEP installations to ensure compliance with specifications and standards.- **Troubleshooting:** Identify and resolve any issues or conflicts in the MEP systems during construction and post-installation.- **Documentation:** Maintain accurate project documentation including reports, drawings, and specifications throughout the project lifecycle.**Required Skills and Expectations:**Candidates should possess a strong technical understanding of MEP systems and be proficient in design software. Excellent problem-solving skills, attention to detail, and the ability to work in a team are essential. Candidates must have effective communication skills to collaborate with various stakeholders and lead project discussions. Time management skills are crucial to ensure project deadlines are met. Additionally, candidates should be proactive in staying updated with industry trends and technologies. Male applicants are preferred for this position.

Position : Draughtsman (FF) and (PHE)Job Location : BangaloreSoftware Skills: Autocad and RevitExperience: Minimum 2-6 years (residential and commercial buildings)Responsibilities (General):Drafting PHE and FF drawingsKnowledge of standards Excellent skills on AutoCADExtracting CAD drawings from RevitPreparing Images and 3D rendering.HR RecruiterMahima Consultancy9096446948

Prepare and optimize CAD drawings for:o CNC Bridge Saws slab layouts, straight cuts, miters, and angle cutso 4-Axis CNC Routers cut-outs, drainboards, recesses, carvings, andengravingso CNC Baluster / Column Profiling Machines profiles, diameters, lengths,and turning references Ensure all drawings are dimensionally accurate, properly scaled, and CNC compatible Work closely with CNC operators and programmers across cutting, carving, and Align drawings with machine capabilities, tooling limits, and clamping methods Maintain standardized drawing formats, layers, and naming conventions Define reference points, zero points, and machining allowances 38 years experience as a CAD Draftsman / CAD Engineer in CNC-based Proven experience preparing drawings for CNC bridge saws, CNC routers (3 / 4 )axis.

CAD Drawing Expert to support CNC production acrossmultiple advanced stone machines, including CNC Bridge Saws, 4-Axis CNC Routers,and CNC Baluster / Column Profiling Machines.This role is responsible for converting design intent into accurate, CNC-ready drawingsthat ensure smooth execution on the shop floor.achine-Specific CAD Preparation Prepare and optimize CAD drawings for:o CNC Bridge Saws slab layouts, straight cuts, miters, and angle cutso 4-Axis CNC Routers cut-outs, drainboards, recesses, carvings, andengravingso CNC Baluster / Column Profiling Machines profiles, diameters, lengths,and turning references Ensure all drawings are dimensionally accurate, properly scaled, and CNC,37 years experience as a CAD Draftsman / CAD Engineer in CNC-basedmanufacturing Strong proficiency in AutoCAD or equivalent CAD software Proven experience preparing drawings for CNC bridge saws, CNC routers (3 / 4axis), and CNC lathe or baluster profiling machines Practical understanding of CNC machining workflows and limitations Ability to read and interpret architectural and fabrication drawings

Position : Electrical DraftsmanJob Location : MumbaiClient : Leading MEP design consultant companyEducational Qualification: AnySoftware Skills: AutoCAD and RevitExperience: Minimum 3-4 years (residential and commercial buildings)Responsibilities - Electrical (General):Preparation of Scheme plan for Electrical LayoutPreparing design drawings as well as project coordination drawingsHandling project drawings with the concerned engineering staff.Preparation of Main Single line Electrical drawingsPreparation Corporation approval drawings for given dataPreparation of Electrical Lighting and Conduit layoutPreparation of cable tray routing Layout, earthing, and equipmentsPlease send latest resume to mahimaconsultancy05@gmail.comMahima Consultancy, Nagpur7448189290 / 8329699514

Position : PHE and FF DraftsmanJob Location : MumbaiClient : Leading MEP design consultant companyEducational Qualification: AnySoftware Skills: AutoCAD and RevitExperience: Minimum 3-4 years (residential and commercial buildings)Responsibilities - Plumbing & FF (General):Sound knowledge on Plumbing and Fire Protection drafting as per NBC and Indian relevant Codes.Preparation of Design documents & Technical Data sheetPreparation of drawings for water supply pipes, drainage system, storm water design, WTP, STP and Fire Protection system.Coordination for project activities and drawing specifications with the clients to ensure drawings and documents are as per the specifications.Please send latest resume to mahimaconsultancy05@gmail.comMahima Consultancy, Nagpur7448189290 / 8329699514

Position : Draughtsman (Electrical)Job Location: MumbaiSoftware Skills: Autocad Experience: 3-8 years (residential and commercial buildings)Responsibilities - Electrical (General):Preparation of Scheme plan for Electrical LayoutPreparing design drawings as well as project coordination drawingsHandling project drawings with the concerned engineering staff.Preparation of Main Single line Electrical drawingsPreparation Corporation approval drawings for given dataPreparation of Electrical Lighting and Conduit layoutPreparation of cable tray routing Layout, earthing, and equipments

Conduct research into the feasibility, design, operation and performance of mechanisms, components and systemsPlan and manage projects, and prepare material, cost and timing estimates, reports and design specifications for machinery and systemsDesign power plants, machines, components, tools, fixtures and equipmentAnalyze dynamics and vibrations of mechanical systems and structuresSupervise and inspect the installation, modification and commissioning of mechanical systems at construction sites or in industrial facilitiesDevelop maintenance standards, schedules and programs and provide guidance to industrial maintenance crewsInvestigate mechanical failures or unexpected maintenance problemsPrepare contract documents and evaluate tenders for industrial construction or maintenanceSupervise technicians, technologists and other engineers and review and approve designs, calculations and cost estimates.

Conduct research into the feasibility, design, operation and performance of mechanisms, components and systemsPlan and manage projects, and prepare material, cost and timing estimates, reports and design specifications for machinery and systemsDesign power plants, machines, components, tools, fixtures and equipmentAnalyze dynamics and vibrations of mechanical systems and structuresSupervise and inspect the installation, modification and commissioning of mechanical systems at construction sites or in industrial facilitiesDevelop maintenance standards, schedules and programs and provide guidance to industrial maintenance crewsInvestigate mechanical failures or unexpected maintenance problemsPrepare contract documents and evaluate tenders for industrial construction or maintenanceSupervise technicians, technologists and other engineers and review and approve designs, calculations and cost estimates.

Conduct research into the feasibility, design, operation and performance of mechanisms, components and systemsPlan and manage projects, and prepare material, cost and timing estimates, reports and design specifications for machinery and systemsDesign power plants, machines, components, tools, fixtures and equipmentAnalyze dynamics and vibrations of mechanical systems and structuresSupervise and inspect the installation, modification and commissioning of mechanical systems at construction sites or in industrial facilitiesDevelop maintenance standards, schedules and programs and provide guidance to industrial maintenance crewsInvestigate mechanical failures or unexpected maintenance problemsPrepare contract documents and evaluate tenders for industrial construction or maintenanceSupervise technicians, technologists and other engineers and review and approve designs, calculations and cost estimates.

We are looking for a skilled MEP Site Engineer to join our team in Hyderabad. This role is ideal for individuals with 1 to 7 years of experience in mechanical, electrical, or plumbing systems. The MEP Site Engineer will be responsible for overseeing the installation, maintenance, and operation of MEP systems in construction projects.**Key Responsibilities:**- **Supervise Installation:** Ensure that all mechanical, electrical, and plumbing installations are carried out according to design specifications and industry standards.- **Quality Control:** Monitor work progress and quality, ensuring compliance with project requirements and that all installations meet safety regulations.- **Collaborate with Teams:** Work closely with architects, contractors, and other engineers to address any issues and ensure smooth project execution.- **Site Management:** Manage daily site operations, including labor and material coordination, to keep projects on track and resolve any on-site challenges.- **Provide Technical Support:** Offer technical guidance to construction teams, helping them understand MEP systems and installations.- **Documentation and Reporting:** Maintain accurate records of work performed, prepare reports on project status, and document any changes made during the installation process.**Required Skills and Expectations:**Candidates should have a strong background in MEP systems, with a degree or diploma in engineering or architecture. Proficiency in technical drawing software and project management tools is essential. Strong communication and teamwork skills are crucial, as the role demands constant interaction with various stakeholders. Candidates must be detail-oriented, able to problem-solve effectively, and manage multiple tasks efficiently. A commitment to safety and quality standards is also expected.

We are seeking a dedicated CAD Engineer with 1 to 2 years of experience to join our team in Nashik. The ideal candidate should possess a Bachelors degree in Engineering and have a strong foundation in computer-aided design (CAD) software.**Key Responsibilities:**- **Creating Detailed CAD Models:** Develop accurate 2D and 3D models based on project requirements to aid in product design and development.- **Drafting Technical Drawings:** Produce technical drawings and schematics that communicate complex information clearly to engineering and manufacturing teams.- **Modifying Existing Designs:** Collaborate with senior engineers to revise and enhance existing CAD designs to improve functionality and efficiency.- **Reviewing Design Specifications:** Assess project specifications and requirements to ensure all designs align with company standards and client expectations.- **Collaborating with Cross-Functional Teams:** Work closely with other departments such as manufacturing, quality assurance, and project management to ensure successful project execution.**Required Skills and Expectations:**The ideal candidate must be proficient in using CAD software, such as AutoCAD or SolidWorks. A strong understanding of engineering principles and practices is essential. Good problem-solving skills and attention to detail are necessary for creating accurate designs. Effective communication skills will facilitate collaboration with team members and stakeholders. A proactive attitude and willingness to adapt to new challenges are also important, as is the ability to manage multiple projects simultaneously in a fast-paced work environment.

Key ResponsibilitiesDrawing Creation: Use CAD software (e.g., AutoCAD, Revit) to produce detailed 2D and 3D drawings, including floor plans, elevations, schematics, wiring diagrams, and assembly drawings, based on sketches or design data provided by engineers.Revision and Modification: Revise existing drawings to reflect design changes (redlining), updates, or required dimensional corrections, ensuring all revisions are documented and controlled.Standards and Compliance: Ensure all drawings adhere to required industry codes (e.g., ASME, IS codes), standardized drafting practices, and company quality standards, including correct use of GD&T (Geometric Dimensioning and Tolerancing).Documentation: Organize and maintain a clean digital database of drawing files, specifications, and related documents for easy retrieval and version control.Material Quantification: Assist in calculating material quantities, dimensions, and specifications necessary for the final product or construction project.

DRAFTSMAN -- experience of AutoCAD.- 2D/3D*Knowledge of packaging & sales will be added advantage.^QualificationDiploma mechanical or ITI with Auto cad