Duties & Responsibility
• Experience in hardware oriented / embedded firmware development
• Excellent Programming Skills in C language. Assembler know how is desirable to maintain older designs
• Should have working experience with G...
Position: Project Engineer for Plastic Products.
Qualification: B Tech/BE
Experience: 3 to 8 yrs. In Analysis, Design Skills, Project Management, Manufacturing Methods and Procedures, Process Improvement, Technical Understanding, Documentation Skil...
Architect, design, develop, test and validate electronic hardware and embedded systems. Perform Value Analysis and Value Engineering (re-design) of existing hardware circuit boards inside Body Control Systems (BCS) of automotive vehicles, Body Contro...
Key Skills : control system,electronics engineer,circuit designing,power electronics,embedded c,electronics engineering
- Should be Familiar with Embedded Systems, C, C+ ( Programming Language)
- Should have work experience on PCB Designing & Trouble shooting
- Should have work experience on Circuit Designing ( Analog/ Digital)
Key Skills : embedded systems developer,pcb designing,troubleshooting
Looking for driven candidates ready to start a challenging career with a top-tier tech company.
Design and development of Embedded Boards for the defense sector.
Schematic capture, Component selection, Power analysis, testing, Board bri...
Key Skills : design and development of embedded boards for the defense sector,hardware design,circuit designing,board design
Qualifications Required: Diploma/B.E/B.Tech/Ms/M.Tech
Experience: 2 To 15 Years
Location: Toronto, Ottawa, Vancouver, Scarborough, North York, Mississauga, Calgary, Montreal
1 Prepare Material Cost And Timing Estimates, Reports And Design...
We are looking for Sr. Eng. R & D
JD for Mechanical Engineers-
Designing of mechanism, Sheet metal parts, Plastic parts, Tolerance optimization. Expertise in use of CAD/CAE/MATLAB tools
for mechanism design, Exposure to Six Sigma and DFSS desig...
- Expertise in Low PowerPhysical design and Static Timing Analysis.
- Experience in Netlist-GDS flow which includes Synthesis, Layout(Floorplan, Place and Route, CTS (clock tree synthesis), Static Timing Analysis, Formal Verification, Physical Ver...
- Expertise in Low PowerPhysical design and Static Timing Analysis
- Experience in Netlist-GDS flow which includes Synthesis, Layout(Floorplan, Place and Route, CTS (clock tree synthesis), Static Timing Analysis, Formal Verification, Physical Verifi...
- Development of IO pads libraries (in various technologies) including design, characterization & view generation for industry standard EDA tools.
- Verification of functionality, performance, power, and all the ESD/LU requirements for all I/O c...
Qualification: B.E Electrical / Diploma in Mechanical
Position: 5 members
Experience: Fresher
Experience: 1-2 years with knowledge of ACAD/E Plan
Skill set:
Knowledge of electrical circuit design
Product selection and knowledg...
Key Skills : quality control engineer,designing,autocad designing,mechanical engineering
RS 90,000 To 1,25,000 Haridwar, Kashipur, Rudrapur-Udham, Sitarganj
Hiring for urgent opening for Electronics and Electrical Engineers.
Skills Required: Production, Quality, maintenance, PLC, e-CAD, SCADA, VLSI Design,
Candidate should be flexible to work in different domains.
Functional Area: Production, Manu...
Required to Design Schematics for Manufacturing Machinery, Evaluate Machine Safety Circuits, and also to Program Plc's and Hmi's.
plc Programming (ab, Omron, Pilz).
familiarity with Cnc, Robots, Pneumatics, Hydraulics
Expertise in Analog LayoutDesign/Architecture
- Creation and updates ofLayout, complex analog circuits
- Floorplaning, Extraction
- Block level, top level layout design
- Experience in MIPI layout design is preferred
- Experience in submicron te...
Key Skills : Analog Layout Designing,Analog Layout Engineer,Analog Design Engineer
We have urgent requirement of Electronic Design Engineer at Mumbai.
Required Education:
B.Tech/B.E. ( Electronics ) MSc. ( Electronics )
Required Experience & Skills:
1. Domain expert with 5-6 years of industry experience.
2. Experie...
max Systems is looking for Embedded Systems Engineer for its Chennai development center,
As an embedded engineer you will be working on design, development and testing of advanced microprocessors and microcontrollers based systems for Aerospac...
Dear Engineer,
We impart Hands-on paid training on Power Plant Technology, Boiler, CHP, Turbine, Condenser, Cooling Tower, Gear Box, Dearater, PLCs, SCADA, HMI, Motion Control (Drives & Motors), DCS, Industrial Networking, Process control and Inst...
- 10 To 15 Years Hands On Experience
- Bachelor Degree :B.Tech/M.Tech in Electrical Engineering
- Preferred Gender: Male
- Background /Industry: Having experience in design, engineering and estimation of substations, transmission lines, city dist...
This is Vaibhav from SSJ Solutions and we have some exciting career options for you.
We have been providing exciting career options at senior/middle levels (from CEOs, SBU Heads down to PMs/PLs) since 1991 in IT/Software, Telecom, Finance, HRD for I...
Ability to design and develop complex Printed Circuit Boards and provide innovative design solutions for product development.
Proficient in design/layout of Digital, Analog and Power designs.
Identification and creation of process procedures for la...
1. Creativity in designing new circuits which is capable of the building design.
2. Study of drawing and execute the work
3. To co-ordinate with electrical contractor for Electrification, Execution, Erection & Commissioning.
4. To provide the ...
DV Engineers having experience in (System Verilog, UVM)
Experience 3 Years to 8 Years
Job Locations Bangalore, Shanghai,
JD:-
a ) SoC based verification:
- Must have working knowledge of Verilog , System Verilog (HVL)
Key Skills : system verilog,uvm,ovm,axi,ace,ahb,apb,verilog,amba,data collection,data analyst,data...
The Candidate Should Be Responsible for Designing, Developing, and Testing Computer Hardware, Including Computer Systems, Circuit Boards, Computer Chips, Keyboards, Routers, and Printers.
primary Responsibilities
- Design and Oversee the Product...
Greetings from Job Ingo HR Solution!!!
This is to inform you Currently We Have Urgent Openings for Our Client.
Job Title/Designation: Production Engineer Required for Manufacturing Industry.
No. of Vacancies: 02
Education/Qualification: Any Grad...
- Experience : 8 - 12 Years
- Location : Bangalore
- 8+ Years of experience in ASIC Verification
- Expert in System Verilog and verification methodologies
- Expertise in Bus protocols
- Experience with simulators, debug tools, and commercial v...
1 - Programming Microcontrollers In C.
2 -Atmega, Pic, Arm 7, Raspberry Pi
3 -Designing, Developing And Debugging Electronic Circuits.
4 - Pcb Designing
5 -Creating Circuit Diagrams Abstract And Project Reports.
6 -Guiding Juniors In Building C...
• Develop micro-architecture and RTL implementation.
• Block level/ full chip integration and design.
• Hands-on with Lint, CDC , LEC and preferably Low Power check tools
• Some experience of AXI/AHB
• design in System Verilog and timin...
Clipocruit Job Placements & Career Counseeling Pvt Ltd
RS 6,00,000 To 16,00,000 Hyderabad
Requirements:
• Analog and Mix signal block connectivity verification at RTL and gate level.
• Integrate analog models with RTL and GATE simulation environment.
• Define test strategy for Analog blocks - create test plan, define test concurr...
Designing & Commissioning of Electric Control Panel System.
- Commissioning of Projects(PLC, HMI)
- Preparation of control circuit Small projects.
- PLC Programming.
- Control System Drawing preparation.
We Would like to Introduce Ourselves as Leading Company Providing Industrial Automation & Power Plant Training. Sr Thermonix Technologies is Committed to a Mission of Becoming the Best Plc Training in Delhi/ncr.
generic Training Methodology a...
Should have basic knowledge of Hardware design.
Exposure on MATLAB & P-Spice
PCB Designing & Simulations
Circuit Analysis, Circuit Design and Troubleshooting
Should have the basic knowledge of programming especially ADC-DAC
- 4 experience with Bachelor/Master’s degree in EE or EC Engineering.
- Must be from R&D Background.
- Demonstrated experience designing analog and digital circuits.
- Strong knowledge in FIR and IIR filters design
- Experience in tools like ...
Key Skills : production manager,electrical engineer,electrical production manager,electronics engineer,matlab,simulink,electrical incharge,electrical...
Candidate with Sound Knowledge of Embedded C Programming On Various Micro-controller Architecture with Understanding of Embedded Hardware, Handling Various Technical Aspects like Product Documentation, Coding of Modules, Monitoring Critical Paths &a...
Expertise in Low PowerPhysical design and Static Timing Analysis
Experience in Netlist-GDS flow which includes Synthesis, Layout(Floorplan, Place and Route, CTS (clock tree synthesis), Static Timing Analysis, Formal Verification, Physical Verificat...
1) Must be Diploma / BE in Electrical-Electronics
2) Require minimum 2-3 Year Experience in Electronic Panel-Circuit Designing in Auto CAD and E-Plan Software.
3) Payment: As per Experience and interview.
Key Skills : panel-circuit designing in autocad and e-plan software.,panel-circuit designing in autocade-plan software.
Product design, development and Testing using Skills & Experience in LED Lighting Industry.
Hands-on experience in Testing of LED Driver, LED Light, Switching Transformers, Electronic Components as per various Industry Standards.
Experienced in han...
Key Skills : a good team player with excellent communication skills robust decision making ability strong organizing capabilities self motivated with an...
Perform formal product development process to full completion
Perform detailed analysis of designs, create test procedures and conduct testing to verify equipment designs and analysis.
Responsible for development of production drawings and manufac...
Job Responsibility Involves Full Ownership of Complete Memory Development Process Starting from Freezing of Specifications , Forming the Verification Plan , Ensuring the Timely Approvals from Customer , Self Execution of Memory Design , Verification.
1. Skills and Knowledge:
a.Hardware design, Schematics designing & PCB Layout designing of boards (consisting Microcontroller, memory and Analog components etc.)
b.Board Bring up, final testing and release of Hardware.
c.Designing of Analog Circui...
Collaborating with engineers and design teams in the design and development of complex, detailed layouts of rigid and flexible printed circuit boards using CAE and CAD applications and tools. You would work with multiple design teams to plan schedule...
RS 1,75,000 To 4,50,000 North Delhi, South Delhi, East Delhi, West Delhi
As An Application Engineer You Will Work Directly, Sometimes in Great Depth, with Customers to Understand Their Technical and Business Challenges and Help Them Appreciate How to Apply Our Products Toward the Resolution of Their Problems.
SR Thermonix Technologies's generic training methodology and focus on practical training has helped it gain strong foothold in Indian industry.
Eligibility Criteria:
• Degree / Diploma / ITI Engineers in electronics & Communication, Electric...
Learns the practical application of engineering principles, achieves expertise in Electrical Engineering, and investigates new techniques as part of a team. Responsible for designing Electrical product/subsystem release solutions.
Duties include (...
PCB layout design.
Design & development of Analog & Digital based hardware circuit, Testing & Troubleshooting, Benchmarking :
Competitor product study and analysis at Schematic & Layout level PCB Design,
Hardware Design (SMPS De...
Loading...