AutoCAD Job Vacancies in Mysore

To manage team of Engineers and provide them technical guidance. To perform engineering analysis and prepare calculations complying with Project Design Criteria, codes of practises and company standards. To supervise drafters in the production of engineering drawings in order to develop practical and economic designs. To participate in the preparation of all project design deliverables including layout drawings, detail drawings, schedules, specifications, data sheets, calculations requisitions, and technical tender evaluations, in accordance with the project requirements and the company procedures and standards. To ensure technical integrity of design deliverables. To ensure that all document checking and design verification tasks have been completed in accordance with the company and project procedures before formal document issue. To ensure conformance with customer requirement. To liaise with other consultants and to co-ordinate the discipline activities with the others to achieve the overall project design objectives in the most efficient manner. Attend meetings as and when required and prepare minutes of meeting. Resolve technical problems at site by liaising with PE directly. Prepare tender specifications and assist team to select competent vendor Support supervisors in the day-to-day execution of projects Undertake learning and development on a consistent and regular basis.

Checking materials and work in progress for compliance with the specified requirements.Observance and making sure of safety requirements on site.Resolving technical issues with employers representatives, suppliers, subcontractors and statutory authorities.Quality control in accordance with CSIs/procedures method statements, quality plans and inspection and test plans, all prepared by the project management team and by subcontractors.Liaising with company or project purchasing department to ensure that purchase orders are adequately defined as per the specified requirements.Measurement and valuation (in collaboration with the project quantity surveyor where appropriate).Providing data in respect of variation in orders and site instructions.Preparing and recording drawings, technical reports site diary and estimation of the project (detailed and abstract).Rate analysis of labour and activities.Monitoring labour strength and material movement at site.Updating measurements of work completion on daily basis and reporting to the office.Co-ordinating with the meetings between Architects, Clients & Engineer.Labour workforce management as required.

JOB DESCRIPTIONMechanical Designer (Solidworks)Job DescriptionWe are seeking a mechanical SolidWorks designer. This individual will be part of the R & D and engineering department and work closely with Production to design fans and exhaust systems. Responsibilities will include producing detailed bill of materials, models, assemblies and production drawings for new and existing products.ResponsibilitiesProvide/Develop Fabrication DocumentationMaintain Updated Fabrication DocumentationContinuous Design ImprovementProduct Revision Control - ECNNew Product Design/DevelopmentTechnical Documentation ContentMaintain/Update CAD LibraryBill of material through softwareMachine costingDesign statndardsSkills & ExperienceExpert in Solidworks creating parts, assemblies, design tables and drawings.Prefer 5+ years experience with advanced Solidworks and manufacturing.Proficient in AutoCAD creating 2D drawings.Mechanical background, preferably in exhaust systems or heating appliances, but not required.Experienced in sheet metal designDetail oriented, organized with the ability to handle multiple ongoing projects.Ability to communicate with sales, engineers, and outside customers.Familiar with engineering process, revisions, ECR, change orders, etc.Proficient with MS Office and Adobe.

1. Outline client design objectives.2. Conceptualize and sketch design plans.3. Determine cost of completion and project requirements in the budgeting phase.4. Set a timeline for the completion of an interior design project.5. Source materials and products included in plans.6. Create 'mood boards' to sample your design vision.7. Utilize computer applications in the design process.8. Inspect design after completion to determine whether client goals have been met.Interior Designer Requirements:Bachelor's degree in interior design or related fields.Portfolio of design work.Project management experience.Experience with computational design.Highly creative, imaginative and artistic.Excellent communication skills, especially in regard to communicating an artistic vision.Proficiency in AutoCAD, Illustrator, SketchUp or similar design softwareKnowledge of preparing BOQ

We are Currently looking for young passionate & creative individuals to get on board in our journey..

*Manage, design, develop, create and maintain small-scale through to large-scale construction projects in a safe, timely and sustainable manner*Conduct on site investigations and analyze data*Assess potential risks, materials and costs*Provide advice and resolve creatively any emerging problems/deficiencies*Oversee and mentor staff *Monitor progress and compile reports in project status*Manage budget and purchase equipment/materialsComply with guidelines and regulations including permits, safety etc and deliver technical files and other technical documentation as required

vacuum based waste water collection system in India and Abroad, forour engineering department, looking for a mechanical engineer.Job Description:- Make pre-studies of project;- Capacity calculations for the installations to design;- Develop lay outs and detailed drawings;- Work towards standard set-ups;- Draw in conversion from 2D to 3D design;Qualification:Bachelor Degree in Mechanical EngineeringKnowledge and experience in 2D&3D ModellingExperience:- 5+ Years and hands on experience in understanding the functions of pumps and itsdesign- Excellent Communication in written and spoken English- Self-motivator, team player,Salary:Commensurate with experience and negotiable

Well Conversant on HVAC, Plumbing, Drainage, and MEP related projects with site execution with understanding drawings preparation of material & document submittals.Should be experienced in site execution & Project management.Should be experienced in Testing, Commissioning of HVAC Projects, specially Air Balancing, Water Balancing & generating various reports related to HVAC services.Familiar with all the Inspection procedure & quality related to above.Capable to lead the site team & manage manpower.Good knowledge of EC Fan, Air Cooled Chillers, AHU etc.Preparation, Verification & Certification of Erection bills with measurements.Should be comfortable for working in any state in India.

QA/QC Engineer(Electrical Works)/ Instrumentation Job Summary:- Electrical engineer familiar with all major engineering standards associated with control gear components and electrical power station, Results-oriented Electrical Engineer specializing in high-level problem-solving process efficiency, and day-to-day maintenance in a manufacturing environment.QA/QC Engineer(Electrical Works)/ Instrumentation Duties and Responsibilities:- Responsible for all electrical inspections related to installation, testing, and commissioning. Responsible for conducting the inspection of all ongoing activates for electrical installation.Educational Qualification: B.tech in Engineering from recognized Technical Board/ Institute with not less than 50% marks.Diploma (Preferred)For More Details Please Visit This Site:.mtpltd.in

QA/QC Engineer(Electrical Works)/ Instrumentation Job Summary:- Electrical engineer familiar with all major engineering standards associated with control gear components and electrical power station, Results-oriented Electrical Engineer specializing in high-level problem-solving process efficiency, and day-to-day maintenance in a manufacturing environment.QA/QC Engineer(Electrical Works)/ Instrumentation Duties and Responsibilities:- Responsible for all electrical inspections related to installation, testing, and commissioning. Responsible for conducting the inspection of all ongoing activates for electrical installation.Educational Qualification: B.tech in Engineering from recognized Technical Board/ Institute with not less than 50% marks.Diploma (Preferred)For More Details Please Visit This Site:.navratnaindia.in

. Creating Detailed DrawingsDevelop precise technical drawings and blueprints based on engineering specifications.Use CAD software (such as AutoCAD, Revit, or similar) to produce 2D and 3D models of structures.2. Interpreting Design ConceptsWork closely with structural engineers and architects to understand their designs and requirements.Translate conceptual sketches into detailed construction drawings.3. Structural DetailingProvide detailed drawings of structural components, such as beams, columns, foundations, and connections.Include specifications for materials, dimensions, and fabrication processes.4. Reviewing and Modifying DrawingsReview design drawings for accuracy and completeness before finalization.Make revisions based on feedback from engineers or clients.5. CollaborationCollaborate with other drafters, engineers, and project managers to ensure all aspects of the project are considered.Attend project meetings to discuss design progress and updates.6. Compliance with StandardsEnsure that all drawings adhere to industry standards, building codes, and regulations.Stay updated on relevant codes and drafting standards.7. Documentation ManagementOrganize and maintain project documentation, including revisions and version control of drawings.Prepare project reports and technical documents as needed.8. Site Visits and InspectionsOccasionally visit construction sites to gather information and ensure that drawings align with on-site conditions.Take measurements and notes for accurate drafting.9. CommunicationCommunicate effectively with engineers, architects, and construction teams to clarify design intent.Address any questions or concerns regarding drawings during the construction process.10. Problem-SolvingIdentify and resolve potential issues in drawings before they impact construction.Suggest design modifications that enhance functionality or efficiency.