Service Engineer Jobs in India

An Aircraft Maintenance Technician is responsible for inspecting, maintaining, troubleshooting, repairing, and servicing aircraft systems and components to ensure aircraft airworthiness, safety, and compliance with aviation regulations. The technician performs scheduled and unscheduled maintenance activities on aircraft structures, engines, avionics, hydraulic systems, and other critical equipment.Key ResponsibilitiesAircraft Inspection & MaintenancePerform routine, preventive, and scheduled maintenance on aircraft.Conduct pre-flight, transit, daily, weekly, and periodic inspections.Inspect aircraft structures, engines, landing gear, and mechanical systems.Ensure aircraft meet safety and airworthiness standards.Identify defects, wear, corrosion, or damage.Troubleshooting & RepairsDiagnose mechanical, electrical, hydraulic, and pneumatic faults.Repair or replace defective aircraft components.Troubleshoot aircraft systems using technical manuals and diagnostic equipment.Perform corrective maintenance and emergency repairs.Aircraft Systems MaintenanceMaintain aircraft engines and propulsion systems.Service hydraulic, fuel, pneumatic, and environmental control systems.Inspect and maintain landing gear and braking systems.Assist in avionics and electrical system maintenance.Perform lubrication and component servicing.Documentation & ComplianceRecord maintenance activities accurately in maintenance logs.Complete work orders, inspection reports, and service records.Ensure compliance with DGCA, FAA, EASA, and airline maintenance standards.Follow aircraft maintenance manuals and engineering procedures.Safety & Quality AssuranceFollow aviation safety regulations and company SOPs.Maintain a clean and organized work environment.Use Personal Protective Equipment (PPE) appropriately.Participate in safety audits and quality inspections.Report safety hazards and maintenance irregularities.Ground Support OperationsOperate aircraft servicing equipment and tools.Assist in aircraft towing and hangar operations.Coordinate with engineers, technicians, and flight operations staff.Support aircraft turnaround activities when required.Required SkillsAircraft maintenance and inspection knowledge.Mechanical and electrical troubleshooting skills.Knowledge of aircraft systems and components.Ability to read technical manuals and engineering drawings.Familiarity with aviation regulations and safety procedures.Problem-solving and analytical skills.Teamwork and communication abilities.Attention to detail and accuracy.Computer literacy and maintenance software knowledge.Educational QualificationsEssentialDiploma or Degree in Aircraft Maintenance Engineering, Aeronautical Engineering, Mechanical Engineering, or related field.PreferredDGCA-approved AME course.Aircraft Type Training Certification.Aviation maintenance certifications.Experience RequirementsFresherBasic knowledge of aircraft maintenance procedures.Practical training or apprenticeship experience preferred.Experienced1-5+ years of aircraft maintenance experience.Experience on commercial, cargo, or private aircraft.Knowledge of aircraft maintenance documentation systems.Working ConditionsAirport, hangar, workshop, and maintenance facilities.Rotational shifts including nights, weekends, and holidays.Exposure to aircraft noise and outdoor weather conditions.Physical work involving lifting, climbing, and working in confined spaces.Salary Range (India)Fresher: 25,000 - 30,000 per month1-3 Years Experience: 30,000 - 50,000 per month3-5 Years Experience: 50,000 - 80,000 per monthLicensed/Highly Skilled Technicians: 80,000+ per month

As an MEP Site Engineer, your primary role will involve managing and overseeing mechanical, electrical, and plumbing (MEP) works on construction sites to ensure projects are completed efficiently and to the highest standards.**Key Responsibilities:**- **Project Coordination:** Work closely with project managers and other engineers to coordinate MEP activities and ensure alignment with the overall project schedule.- **Site Inspection:** Conduct regular site inspections to verify that MEP installations comply with design specifications and local codes, ensuring safety and quality are maintained.- **Technical Support:** Provide technical assistance and guidance to contractors and subcontractors regarding MEP systems, troubleshooting any issues that may arise during installation.- **Documentation:** Maintain accurate records of MEP work, including progress reports, change orders, and any site modifications, to keep stakeholders informed and uphold project transparency.- **Material Management:** Oversee the procurement and proper usage of MEP materials, ensuring that they meet the required standards and are delivered on time to avoid delays.**Required Skills and Expectations:**Candidates should possess a Bachelors degree in Architecture, Engineering, or an Advanced/Higher Diploma related to MEP systems. A minimum of 1-7 years of relevant experience is expected. Strong analytical and problem-solving skills are essential for diagnosing issues effectively. Good communication skills are required to collaborate effectively with teams and stakeholders. Familiarity with building codes, safety standards, and best practices in the industry is critical. Lastly, proficiency in relevant software tools for designing and managing MEP systems will be advantageous.

Job for BE / BTech , diploma holder (Electrical)Candidate job profile :-Floating engineer This includes traveling.As a Engineer with a specialization in Electrical Engineering, you'll be responsible for maintaining and improving electrical systems. Your role will involve troubleshooting issues, performing regular maintenance, and ensuring systems operate efficiently and safely. This position requires on-site support, technical expertise, and strong problem-solving skills.Responsibilities:-Troubleshoot and resolve electrical system issues.Perform regular maintenance and inspections of electrical systems.Ensure compliance with safety and regulatory standards.Collaborate with other engineers and technicians to improve efficiency.Document service and maintenance activities accurately.Provide on-site technical support as needed.Manage and prioritize a schedule of multiple service tasks.Job location india Salary- 15k + 3k(Travel allowance)If you interested please share your update resume my email id info@maanarmadafoundation.co.in

Designation :- Service Engineer (Electric)Qualification:- Minimum ITI ElectricianLocation :- Ahmedabad GujaratExperience:- Minimum 1 year of ExperienceInterested candidate can contact on 7623888872

We are looking for a dedicated Aircraft Maintenance Technician to join our team in Visakhapatnam. In this role, you will be responsible for ensuring the safety and functionality of aircraft. This is a full-time position suitable for candidates with 0 to 6 years of experience and a minimum education of 12th pass.**Key Responsibilities:**- **Conduct Inspections:** Regularly check aircraft systems, engines, and components to ensure they meet safety standards and regulations.- **Perform Repairs:** Identify and fix mechanical issues, replacing defective parts to maintain optimal performance.- **Maintain Records:** Document all maintenance activities accurately to comply with regulatory standards and help with future inspections.- **Collaborate with Team:** Work closely with other technicians and engineers to assess aircraft performance and establish maintenance schedules.- **Follow Safety Protocols:** Adhere to safety guidelines to prevent accidents and ensure a safe working environment for all personnel.**Required Skills and Expectations:**- Candidates must have at least a 12th-grade education; technical courses related to aircraft maintenance are a plus.- Strong mechanical aptitude is essential, along with problem-solving skills to address maintenance challenges effectively.- Attention to detail is crucial for inspecting aircraft and keeping accurate records.- Good communication skills are needed for teamwork and reporting directly to supervisors.- A commitment to safety and adherence to aviation regulations is expected at all times. This position offers a unique opportunity to develop your skills in the aviation industry while contributing to the safety and reliability of aircraft operations.

We are looking for hardworking and enthusiastic individuals to join our team as Ground Staff in Indore. This role is essential for ensuring smooth operations at our facility. Both freshers and experienced candidates (0-6 years) who have completed their 12th grade are encouraged to apply. **Key Responsibilities:**- **Customer Assistance:** Greet and assist passengers as they arrive, ensuring a welcoming experience and handling inquiries efficiently.- **Check-in Support:** Help passengers with the check-in process, including baggage handling and ticket verification, to facilitate a seamless travel experience.- **Ticketing and Documentation:** Manage the sale of tickets and prepare necessary travel documents, ensuring accuracy and compliance with regulations.- **Baggage Services:** Ensure timely handling of baggage, guiding passengers to the baggage claim area, and addressing any issues they may encounter.- **Safety Compliance:** Follow safety procedures and protocols at all times, contributing to a secure environment for both staff and passengers.**Required Skills and Expectations:**Candidates should possess excellent communication skills, both verbal and written, to interact effectively with passengers. A friendly and approachable demeanor is essential for providing great customer service. Basic computer knowledge is required for managing ticketing systems. Candidates should be organized and able to multitask in a fast-paced environment. A team player attitude and a willingness to learn are also important. Candidates must be flexible with work hours, including weekends and holidays, based on operational needs.

Aircraft Maintenance professionals are responsible for inspecting, repairing, and maintaining aircraft systems to ensure safety, airworthiness, and compliance with aviation regulations. They work on airframes, engines, electrical systems, and avionics. Key Responsibilities1. Inspection & MaintenanceConduct routine inspections before and after flightsPerform scheduled maintenance (A-check, B-check, C-check, D-check)Diagnose mechanical and technical faults2. Repair & TroubleshootingRepair or replace defective aircraft componentsTroubleshoot engine, hydraulic, and electrical issuesUse diagnostic tools and maintenance manuals3. Testing & Quality ControlTest aircraft systems after maintenanceEnsure all systems meet safety standardsPerform functional and operational checks4. DocumentationMaintain accurate maintenance logs and recordsEnsure compliance with aviation authoritiesReport defects and corrective actions5. Safety ComplianceFollow strict aviation safety regulationsUse proper tools and protective equipmentEnsure aircraft meets airworthiness standards Types of Aircraft MaintenanceLine Maintenance - Routine checks at airportsBase Maintenance - Major repairs in hangarsPreventive Maintenance - Scheduled servicingCorrective Maintenance - Fixing faults/issues Education & QualificationsDiploma/Degree in Aircraft Maintenance Engineering or Aerospace EngineeringCertification from aviation authorities like:DGCA IndiaFAAEASAAME License (mandatory for certifying engineers) Required SkillsStrong technical and mechanical knowledgeAttention to detailProblem-solving abilityKnowledge of aircraft systems and toolsAbility to work under pressureGood communication and teamwork Tools & Equipment UsedDiagnostic testing equipmentHand and power toolsAircraft maintenance softwareTechnical manuals and blueprints Working ConditionsShift-based work (including nights and weekends)Work in hangars, airports, or outdoor environmentsPhysically demanding (lifting, climbing, bending)Exposure to noise and chemicals Career OpportunitiesAircraft Maintenance TechnicianLicensed Aircraft Maintenance EngineerQuality InspectorMaintenance SupervisorMRO SpecialistTop aviation employers include airlines, defense organizations, and companies like Air India, IndiGo, and SpiceJet. Salary (India Approx.)Fresher: 2.5 - 4 LPAExperienced: 5 - 12+ LPALicensed AME: 10 - 25+ LPA

Job Title: Electrical EngineerLocation: Mumbai , ThaneExperience: 3-5 years (Electrician/Electrical Engineer)Job Summary:We are hiring an Electrician/Electrical Engineer with expertise in electrical panel wiring and installation. The candidate should have hands-on experience in troubleshooting, maintenance, and ensuring compliance with safety standards.Key Responsibilities:Perform electrical panel wiring, installation, and testing.Troubleshoot and repair electrical systems, equipment, and components.Read and interpret electrical drawings, blueprints, and schematics.Conduct preventive maintenance of electrical systems.Ensure safety protocols and compliance with electrical standards.Coordinate with the project/site team for smooth execution of work.Requirements:Diploma and graduate in Electrical Engineering / ITI in Electrician trade.Knowledge of electrical panel wiring and control systems.Ability to read and interpret wiring diagrams.Strong problem-solving and troubleshooting skills.Willingness to work on-site as per project requirements.

Designation :Engineer CalibrationInterested Candidate can contact and apply on 7623888872Designation :Engineer CalibrationQualification : BE/ Diploma in Mechanical CTC: Best in industryLocation :- Rajkot Gujarat1. Must have experience in Metallurgy Lab who have knowledge of instruments.2. Must have Knowledge Calibration method of all IMTEs , Std. Gauges and Weigh Bridge.3. Should be able to give decision based on Calibration report.4. Should be able to do Instruments planning as per requirement of Business Units.5. Ensuring on-time Calibration of TMTEs / Standard gauges / Weigh Bridge,6. Must be having knowledge of making monthly MIS for Calibration section.7. Maintain Calibration Record as per ISO guideline.Interested Candidate can contact and apply on 7623888872

Qualification :Diploma/BE Mechanical/AutomobileJob description :Lead a team to assist customers in resolving equipment-related troubleshooting and schedule maintenance.Maintain CSI (Customer Satisfaction Index) and MTTR (Mean Time to Repair).Generate revenue through parts sales and service schemes, both via dealers and direct customer contact.Provide technical and motivational training to dealer teams to enhance work efficiency.Organize field training sessions for operators and customers, focusing on daily maintenance, safety, and improving operational skills.Manage warranty settlements and ensure stock availability at dealer locations.Coordinate with vendors such as Cummins, Volvo, Eaton, and others to address product and service-related issues.CTC: Best in industryInterested Candidate can apply on 7623888872.

JD:Hand on experience on complaint resolutionToll-free complaint handlingField visit for customer feedbackOff season maintenanceFailure analysisWarranty analysis.Dealer handlingTechnician trainingProduct tracking.Dealer service infra development Minimum experience 2-3 yrsPreferred from implements and tractor industry.Interested candidates can apply now in 7623888872

We are looking for a skilled MEP Site Engineer to join our team in Hyderabad. This role is ideal for individuals with 1 to 7 years of experience in mechanical, electrical, or plumbing systems. The MEP Site Engineer will be responsible for overseeing the installation, maintenance, and operation of MEP systems in construction projects.**Key Responsibilities:**- **Supervise Installation:** Ensure that all mechanical, electrical, and plumbing installations are carried out according to design specifications and industry standards.- **Quality Control:** Monitor work progress and quality, ensuring compliance with project requirements and that all installations meet safety regulations.- **Collaborate with Teams:** Work closely with architects, contractors, and other engineers to address any issues and ensure smooth project execution.- **Site Management:** Manage daily site operations, including labor and material coordination, to keep projects on track and resolve any on-site challenges.- **Provide Technical Support:** Offer technical guidance to construction teams, helping them understand MEP systems and installations.- **Documentation and Reporting:** Maintain accurate records of work performed, prepare reports on project status, and document any changes made during the installation process.**Required Skills and Expectations:**Candidates should have a strong background in MEP systems, with a degree or diploma in engineering or architecture. Proficiency in technical drawing software and project management tools is essential. Strong communication and teamwork skills are crucial, as the role demands constant interaction with various stakeholders. Candidates must be detail-oriented, able to problem-solve effectively, and manage multiple tasks efficiently. A commitment to safety and quality standards is also expected.

A Sourcing Executive drives procurement and vendor development for precision motors and gearboxes. Responsibilities encompass end-to-end purchasing, cost optimization, inventory control, and technical vendor management.Key Responsibilities :-Strategic Procurement: Manage end-to-end procurement, including material planning, inventory control, and cost optimization to ensure zero production delays. Vendor Management: Identify, onboard, and develop new suppliers. Negotiate prices, contracts, and payment terms. Technical Sourcing: Source raw materials and components like round bars, forgings, castings, and injection-molded plastics .Quality & Coordination: Oversee supplier quality and coordinate with internal production teams, engineering, and logistics. System Operations: Utilize Enterprise Resource Planning (ERP) systems for purchase tracking, order processing, and inventory managementRequirements & Qualifications Education:-B.E. or Diploma in Mechanical Engineering. Experience: Typically requires 3 to 6 years of experience in purchasing and sourcing within a manufacturing environment. Domain Knowledge: Understanding of CNC/VMC machining, gear manufacturing processes, and surface protection/hardening techniques .Soft Skills: Strong negotiation, analytical, and vendor coordination

Installs, Calibrates, Maintains, and Repairs Industrial Weighing Equipment, Including Load Cells, Weighbridges, and Electronic Scales. They Troubleshoot Faulty Systems, Perform On-site Repairs, and Provide Technical Customerkey Responsibilitiesinstallation & Calibration: Fit, Install, and Calibrate Electronic Weighing Scales, Benches, and Heavy-duty Load Cell Modules.maintenance & Repair: Diagnose, Maintain, and Repair Faulty Electronic Components, Circuitry, Load Cells, and Weighing Systems.technical Support: Provide Troubleshooting, Service Support (on-site or Telephone), and Training to Customers On Proper Equipment Use.documentation: Produce Service Reports, Maintenance Logs, and Technical Reports.assembly: Assemble Electrical Components in Production Settings.

Job for BE, BTech, Electrical diploma holder candidateCandidate job profile :-As a Service Engineer with a specialization in Electrical Engineering, you responsible for maintaining and improving electrical systems. Your role will involve troubleshooting issues, performing regular maintenance, and ensuring systems operate efficiently and safely. This position requires on-site support, technical expertise, and strong problem-solving skills.ResponsibilitiesTroubleshoot and resolve electrical system issues.Perform regular maintenance and inspections of electrical systems.Ensure compliance with safety and regulatory standards.Collaborate with other engineers and technicians to improve efficiency.Document service and maintenance activities accurately.Provide on-site technical support as needed.Manage and prioritize a schedule of multiple service task