Electrical Maintenance Engineer Jobs in India

An Aircraft Maintenance Technician is responsible for inspecting, maintaining, troubleshooting, repairing, and servicing aircraft systems and components to ensure aircraft airworthiness, safety, and compliance with aviation regulations. The technician performs scheduled and unscheduled maintenance activities on aircraft structures, engines, avionics, hydraulic systems, and other critical equipment.Key ResponsibilitiesAircraft Inspection & MaintenancePerform routine, preventive, and scheduled maintenance on aircraft.Conduct pre-flight, transit, daily, weekly, and periodic inspections.Inspect aircraft structures, engines, landing gear, and mechanical systems.Ensure aircraft meet safety and airworthiness standards.Identify defects, wear, corrosion, or damage.Troubleshooting & RepairsDiagnose mechanical, electrical, hydraulic, and pneumatic faults.Repair or replace defective aircraft components.Troubleshoot aircraft systems using technical manuals and diagnostic equipment.Perform corrective maintenance and emergency repairs.Aircraft Systems MaintenanceMaintain aircraft engines and propulsion systems.Service hydraulic, fuel, pneumatic, and environmental control systems.Inspect and maintain landing gear and braking systems.Assist in avionics and electrical system maintenance.Perform lubrication and component servicing.Documentation & ComplianceRecord maintenance activities accurately in maintenance logs.Complete work orders, inspection reports, and service records.Ensure compliance with DGCA, FAA, EASA, and airline maintenance standards.Follow aircraft maintenance manuals and engineering procedures.Safety & Quality AssuranceFollow aviation safety regulations and company SOPs.Maintain a clean and organized work environment.Use Personal Protective Equipment (PPE) appropriately.Participate in safety audits and quality inspections.Report safety hazards and maintenance irregularities.Ground Support OperationsOperate aircraft servicing equipment and tools.Assist in aircraft towing and hangar operations.Coordinate with engineers, technicians, and flight operations staff.Support aircraft turnaround activities when required.Required SkillsAircraft maintenance and inspection knowledge.Mechanical and electrical troubleshooting skills.Knowledge of aircraft systems and components.Ability to read technical manuals and engineering drawings.Familiarity with aviation regulations and safety procedures.Problem-solving and analytical skills.Teamwork and communication abilities.Attention to detail and accuracy.Computer literacy and maintenance software knowledge.Educational QualificationsEssentialDiploma or Degree in Aircraft Maintenance Engineering, Aeronautical Engineering, Mechanical Engineering, or related field.PreferredDGCA-approved AME course.Aircraft Type Training Certification.Aviation maintenance certifications.Experience RequirementsFresherBasic knowledge of aircraft maintenance procedures.Practical training or apprenticeship experience preferred.Experienced1-5+ years of aircraft maintenance experience.Experience on commercial, cargo, or private aircraft.Knowledge of aircraft maintenance documentation systems.Working ConditionsAirport, hangar, workshop, and maintenance facilities.Rotational shifts including nights, weekends, and holidays.Exposure to aircraft noise and outdoor weather conditions.Physical work involving lifting, climbing, and working in confined spaces.Salary Range (India)Fresher: 25,000 - 30,000 per month1-3 Years Experience: 30,000 - 50,000 per month3-5 Years Experience: 50,000 - 80,000 per monthLicensed/Highly Skilled Technicians: 80,000+ per month

As an MEP Site Engineer, your primary role will involve managing and overseeing mechanical, electrical, and plumbing (MEP) works on construction sites to ensure projects are completed efficiently and to the highest standards.**Key Responsibilities:**- **Project Coordination:** Work closely with project managers and other engineers to coordinate MEP activities and ensure alignment with the overall project schedule.- **Site Inspection:** Conduct regular site inspections to verify that MEP installations comply with design specifications and local codes, ensuring safety and quality are maintained.- **Technical Support:** Provide technical assistance and guidance to contractors and subcontractors regarding MEP systems, troubleshooting any issues that may arise during installation.- **Documentation:** Maintain accurate records of MEP work, including progress reports, change orders, and any site modifications, to keep stakeholders informed and uphold project transparency.- **Material Management:** Oversee the procurement and proper usage of MEP materials, ensuring that they meet the required standards and are delivered on time to avoid delays.**Required Skills and Expectations:**Candidates should possess a Bachelors degree in Architecture, Engineering, or an Advanced/Higher Diploma related to MEP systems. A minimum of 1-7 years of relevant experience is expected. Strong analytical and problem-solving skills are essential for diagnosing issues effectively. Good communication skills are required to collaborate effectively with teams and stakeholders. Familiarity with building codes, safety standards, and best practices in the industry is critical. Lastly, proficiency in relevant software tools for designing and managing MEP systems will be advantageous.

We are seeking a dedicated Civil Site Engineer with 3 to 4 years of experience to oversee construction projects. This role involves managing site operations, ensuring quality standards, and collaborating with project managers and other engineers to deliver successful outcomes.Key Responsibilities:1. **Site Management**: Supervise daily operations on the construction site, ensuring all activities are conducted safely and efficiently.2. **Quality Control**: Conduct regular inspections and tests of materials and workmanship to ensure compliance with project specifications and industry standards.3. **Project Coordination**: Collaborate with architects, contractors, and other stakeholders to coordinate work schedules and resolve any issues that may arise.4. **Document Management**: Maintain accurate records of construction activities, including daily logs, reports, and site drawings.5. **Resource Allocation**: Assist in planning and managing resources such as labor, materials, and equipment to optimize productivity on site.Required Skills and Expectations:Candidates should possess a degree in Civil Engineering and a minimum of 3 to 4 years of relevant experience. Strong organizational and communication skills are essential for effective collaboration with teams and stakeholders. Proficiency in civil engineering software and the ability to analyze designs and drawings are required. A solid understanding of construction processes and safety regulations is crucial to ensure that projects are completed on time and within budget. The successful candidate must demonstrate reliability, attention to detail, and a proactive approach to problem-solving.

Job for BE / BTech , diploma holder (Electrical)Candidate job profile :-Floating engineer This includes traveling.As a Engineer with a specialization in Electrical Engineering, you'll be responsible for maintaining and improving electrical systems. Your role will involve troubleshooting issues, performing regular maintenance, and ensuring systems operate efficiently and safely. This position requires on-site support, technical expertise, and strong problem-solving skills.Responsibilities:-Troubleshoot and resolve electrical system issues.Perform regular maintenance and inspections of electrical systems.Ensure compliance with safety and regulatory standards.Collaborate with other engineers and technicians to improve efficiency.Document service and maintenance activities accurately.Provide on-site technical support as needed.Manage and prioritize a schedule of multiple service tasks.Job location india Salary- 15k + 3k(Travel allowance)If you interested please share your update resume my email id info@maanarmadafoundation.co.in

Requirement for Electrical Maintenance Supervisorb.tech/ Be Electricalfreshers - MaleSal- 18 KSatpur MIDC

As an Aircraft Maintenance Engineer in Kolkata, you will play a crucial role in ensuring the safety and efficiency of aircraft through regular maintenance and repairs. You will be working full-time from the office and collaborating with other team members to maintain high safety standards in aviation.**Key Responsibilities:**- **Perform Regular Inspections:** Conduct thorough checks on aircraft to identify any signs of wear or malfunction, ensuring they meet safety regulations.- **Carry Out Repairs:** Address mechanical and electrical issues found during inspections, using specialized tools and equipment to fix problems effectively.- **Maintain Documentation:** Keep detailed records of all maintenance and repair work done on each aircraft, ensuring compliance with aviation regulations.- **Test Aircraft Systems:** After repairs, run tests on various systems to verify that the aircraft is fully operational and safe for flight.- **Work Collaboratively:** Collaborate with pilots and other engineers to understand maintenance needs and schedule repairs efficiently.**Required Skills and Expectations:**- A strong understanding of aviation safety regulations and maintenance standards is crucial for this role.- Good problem-solving skills are required to diagnose issues accurately and develop effective solutions.- Strong attention to detail is essential to ensure that all maintenance work is completed to a high standard.- Effective communication skills will help you work well within a team and report issues clearly.- A commitment to continuous learning is important, as you will need to stay updated on new technologies and maintenance practices in the aviation industry.

We are seeking an experienced Electrical Maintenance Engineer to join our team in Chakan Pune. The ideal candidate will be responsible for ensuring the efficient operation of electrical systems and equipment, contributing to the overall smooth functioning of our facility.Key Responsibilities:- **Routine Maintenance**: Perform regular inspections and maintenance of electrical equipment, ensuring they function properly and meet safety standards.- **Troubleshooting**: Identify and diagnose electrical issues, providing effective solutions to minimize downtime and maintain productivity.- **Repair Work**: Carry out necessary repairs on faulty electrical systems and components, ensuring timely completion to avoid service interruptions.- **Upgrades and Improvements**: Implement upgrades to electrical systems as needed, enhancing overall performance and efficiency.- **Documentation**: Maintain accurate records of maintenance activities, repairs, and inspections for compliance and future reference.Required Skills and Expectations:Candidates should possess a degree in Electrical Engineering or a related field, along with 2 to 5 years of relevant experience. A strong understanding of electrical systems and maintenance practices is essential. Candidates must be detail-oriented, with solid problem-solving skills and the ability to work effectively under pressure. Excellent communication skills are necessary for coordinating with team members and reporting findings. Ideally, applicants should be proactive and willing to contribute to ongoing improvements in electrical maintenance processes. Gender-specific requirements may apply as per organizational policy.

WE ARE HIRING ELECTRICAL ENGINEERFRESHER AND EXPERIENCE BOTH ARE WELCOMEATTRACTIVE SALARY PROVIDEDLOCATION : MANJUSAR GIDCAPPLY : tpo.vp2017@gmail.comCALL : 8306133342

Fresh dipOMA ELDCTRICAL ENGINEER FOR TAINEE 0-2 YEAR EXPERIENCE IN ANY FIELD LIKE QUALITY PRODUCTION /MAINTENANCE HE WILL BE RESPONSIBLE FOR QUALLITY CHECKING (QC) IN DIPARTMENT /LABOUR HANDLING AND

As an Electrical Maintenance Engineer, you will play a crucial role in ensuring that electrical systems are functioning properly and safely. This position is ideal for fresh graduates holding a diploma in electrical engineering.**Key Responsibilities:**- **Troubleshooting Systems:** Identify problems in electrical systems and find effective solutions to fix them. This includes diagnosing issues in circuits, motors, and other electrical components.- **Performing Maintenance:** Regularly inspect electrical equipment and systems to keep them in good working condition. This may include cleaning, repairing, and replacing components as needed.- **Reading Technical Drawings:** Understand and interpret electrical schematics and layouts to assist in installations and maintenance tasks.- **Documenting Work:** Keep accurate records of maintenance activities, repairs, and inspections. This documentation is important for quality control and future reference.- **Collaborating with Team:** Work closely with other team members to ensure all electrical tasks are completed efficiently and on time.**Required Skills and Expectations:**- A diploma in electrical engineering is essential, indicating foundational knowledge in the field.- Strong problem-solving skills to effectively troubleshoot and tackle electrical issues.- Ability to read and understand technical documents, ensuring precision in maintenance tasks.- Good communication skills to work collaboratively with team members and report effectively on project status and issues.- A proactive and safety-conscious approach when dealing with electrical systems. Candidates must be male and comfortable working from home while ensuring all responsibilities are handled effectively.

We are looking for an Electrical Maintenance Executive to join our team in Asansol. This position is ideal for freshers who have completed their 12th grade and are eager to start a career in electrical maintenance.**Key Responsibilities:**- **Electrical Equipment Maintenance**: Regularly inspect and maintain electrical systems and machinery to ensure optimal performance and safety.- **Troubleshooting Issues**: Identify and resolve electrical faults or malfunctions, minimizing downtime and ensuring smooth operations.- **Installation Assistance**: Assist in the installation of new electrical equipment and systems, following guidelines and safety protocols.- **Documentation**: Maintain accurate records of maintenance activities, repairs, and equipment status for future reference and reporting.- **Safety Compliance**: Adhere to all safety standards and regulations while performing tasks to protect both yourself and your colleagues.**Required Skills and Expectations:**- Candidates must have completed their 12th grade and should be male due to specific role requirements in the workplace.- A basic understanding of electrical systems and components is necessary, along with a willingness to learn.- Strong problem-solving skills are essential to quickly identify and address maintenance issues.- Good communication skills are important for working with team members and reporting issues effectively.- Ability to work in a team environment and follow instructions from senior maintenance staff.This full-time position requires dedication and a proactive approach to learning and executing tasks.

We are looking for a dedicated Electrical Maintenance Engineer to join our team in Asansol. This role is suitable for freshers who have completed a diploma in electrical engineering. As part of our team, you will work from home while ensuring that electrical systems operate efficiently.**Key Responsibilities:**- **Electrical System Monitoring:** Regularly check and monitor electrical systems to identify any issues or areas that require maintenance. This is crucial to ensure optimal performance.- **Troubleshooting:** Diagnose electrical problems promptly and develop effective solutions. You will need to methodically assess issues to resolve them quickly.- **Maintenance Planning:** Schedule routine maintenance tasks to prevent electrical failures. This planning is essential for keeping systems running without interruptions.- **Documentation:** Maintain accurate records of maintenance activities, repairs, and parts used. Proper documentation helps in tracking performance and addressing future issues.- **Collaboration:** Work with other team members and departments to coordinate maintenance activities. Good communication ensures everyone is on the same page regarding electrical systems.**Required Skills and Expectations:**- A diploma in electrical engineering is mandatory; we welcome applications from recent graduates.- Basic understanding of electrical systems and troubleshooting methods will be beneficial.- Strong attention to detail and excellent problem-solving skills are essential for this role.- Ability to communicate effectively in a remote work environment, using digital tools and platforms.- A proactive attitude and willingness to learn will help you succeed in this position.

3-8 year experience in electrical maintenance/erforming regular, scheduled maintenance on electrical wiring, motors, machinery, and electrical fixtures /Maintaining accurate records of maintenance work, repairs, and electrical equipment status

plant electrical maintenance and automation/Troubleshooting expertise in motors, operation and maintenance of LT switchgear/Preventive and breakdown maintenance of MCC panels, PCC panels./Electrical troubleshooting of crane control panels,Required Candidate profileDiploma or Degree in Electrical Engineering + 3 to 6 years in Electrical Maintenance in an Engineering Industry.(Ability to handle shift responsibilities independently)Basic knowledge of plc

We are looking for a dedicated Aircraft Maintenance Technician to join our team in Visakhapatnam. In this role, you will be responsible for ensuring the safety and functionality of aircraft. This is a full-time position suitable for candidates with 0 to 6 years of experience and a minimum education of 12th pass.**Key Responsibilities:**- **Conduct Inspections:** Regularly check aircraft systems, engines, and components to ensure they meet safety standards and regulations.- **Perform Repairs:** Identify and fix mechanical issues, replacing defective parts to maintain optimal performance.- **Maintain Records:** Document all maintenance activities accurately to comply with regulatory standards and help with future inspections.- **Collaborate with Team:** Work closely with other technicians and engineers to assess aircraft performance and establish maintenance schedules.- **Follow Safety Protocols:** Adhere to safety guidelines to prevent accidents and ensure a safe working environment for all personnel.**Required Skills and Expectations:**- Candidates must have at least a 12th-grade education; technical courses related to aircraft maintenance are a plus.- Strong mechanical aptitude is essential, along with problem-solving skills to address maintenance challenges effectively.- Attention to detail is crucial for inspecting aircraft and keeping accurate records.- Good communication skills are needed for teamwork and reporting directly to supervisors.- A commitment to safety and adherence to aviation regulations is expected at all times. This position offers a unique opportunity to develop your skills in the aviation industry while contributing to the safety and reliability of aircraft operations.

Aircraft Maintenance professionals are responsible for inspecting, repairing, and maintaining aircraft systems to ensure safety, airworthiness, and compliance with aviation regulations. They work on airframes, engines, electrical systems, and avionics. Key Responsibilities1. Inspection & MaintenanceConduct routine inspections before and after flightsPerform scheduled maintenance (A-check, B-check, C-check, D-check)Diagnose mechanical and technical faults2. Repair & TroubleshootingRepair or replace defective aircraft componentsTroubleshoot engine, hydraulic, and electrical issuesUse diagnostic tools and maintenance manuals3. Testing & Quality ControlTest aircraft systems after maintenanceEnsure all systems meet safety standardsPerform functional and operational checks4. DocumentationMaintain accurate maintenance logs and recordsEnsure compliance with aviation authoritiesReport defects and corrective actions5. Safety ComplianceFollow strict aviation safety regulationsUse proper tools and protective equipmentEnsure aircraft meets airworthiness standards Types of Aircraft MaintenanceLine Maintenance - Routine checks at airportsBase Maintenance - Major repairs in hangarsPreventive Maintenance - Scheduled servicingCorrective Maintenance - Fixing faults/issues Education & QualificationsDiploma/Degree in Aircraft Maintenance Engineering or Aerospace EngineeringCertification from aviation authorities like:DGCA IndiaFAAEASAAME License (mandatory for certifying engineers) Required SkillsStrong technical and mechanical knowledgeAttention to detailProblem-solving abilityKnowledge of aircraft systems and toolsAbility to work under pressureGood communication and teamwork Tools & Equipment UsedDiagnostic testing equipmentHand and power toolsAircraft maintenance softwareTechnical manuals and blueprints Working ConditionsShift-based work (including nights and weekends)Work in hangars, airports, or outdoor environmentsPhysically demanding (lifting, climbing, bending)Exposure to noise and chemicals Career OpportunitiesAircraft Maintenance TechnicianLicensed Aircraft Maintenance EngineerQuality InspectorMaintenance SupervisorMRO SpecialistTop aviation employers include airlines, defense organizations, and companies like Air India, IndiGo, and SpiceJet. Salary (India Approx.)Fresher: 2.5 - 4 LPAExperienced: 5 - 12+ LPALicensed AME: 10 - 25+ LPA

Aircraft Maintenance professionals are responsible for inspecting, repairing, and maintaining aircraft systems to ensure safety, airworthiness, and compliance with aviation regulations. They work on airframes, engines, electrical systems, and avionics. Key Responsibilities1. Inspection & MaintenanceConduct routine inspections before and after flightsPerform scheduled maintenance (A-check, B-check, C-check, D-check)Diagnose mechanical and technical faults2. Repair & TroubleshootingRepair or replace defective aircraft componentsTroubleshoot engine, hydraulic, and electrical issuesUse diagnostic tools and maintenance manuals3. Testing & Quality ControlTest aircraft systems after maintenanceEnsure all systems meet safety standardsPerform functional and operational checks4. DocumentationMaintain accurate maintenance logs and recordsEnsure compliance with aviation authoritiesReport defects and corrective actions5. Safety ComplianceFollow strict aviation safety regulationsUse proper tools and protective equipmentEnsure aircraft meets airworthiness standards Types of Aircraft MaintenanceLine Maintenance - Routine checks at airportsBase Maintenance - Major repairs in hangarsPreventive Maintenance - Scheduled servicingCorrective Maintenance - Fixing faults/issues Education & QualificationsDiploma/Degree in Aircraft Maintenance Engineering or Aerospace EngineeringCertification from aviation authorities like:DGCA IndiaFAAEASAAME License (mandatory for certifying engineers) Required SkillsStrong technical and mechanical knowledgeAttention to detailProblem-solving abilityKnowledge of aircraft systems and toolsAbility to work under pressureGood communication and teamwork Tools & Equipment UsedDiagnostic testing equipmentHand and power toolsAircraft maintenance softwareTechnical manuals and blueprints Working ConditionsShift-based work (including nights and weekends)Work in hangars, airports, or outdoor environmentsPhysically demanding (lifting, climbing, bending)Exposure to noise and chemicals Career OpportunitiesAircraft Maintenance TechnicianLicensed Aircraft Maintenance EngineerQuality InspectorMaintenance SupervisorMRO SpecialistTop aviation employers include airlines, defense organizations, and companies like Air India, IndiGo, and SpiceJet. Salary (India Approx.)Fresher: 2.5 - 4 LPAExperienced: 5 - 12+ LPALicensed AME: 10 - 25+ LPA

We are Hiring Maintenance Manager At Pharma Companypost : Utility Maintenance Engineereducation : Diploma / Be Mechanical /electrical Engineerexperience : 8-10 Year in Pharma Companylocation : Manjusar Gidc Vadodarasalary : No Bar for Right Candidateapply : Tpo.vp2017@gmail.comcall : 8306133342

WE ARE HIRING ON URGENT BASEPOST : ELECTRICAL MAINTANANCE ENGINEEREDUCATION : DIPLOMA/ BE MECHANICALEXPERIENCE : 1-2 YEARLOCATION : GORVA, VADODARASALARY : 12-20 K DEPEND ON INTERVIEW

Urgent Requirement Maintanance Engineerfull Time Long Term Positioneducation : Diploma / Iti Electricalexperience : 4 -5 Year Experience in Maintanancelocation : Manjusar Gidc, Vadodara Gujaratsalary : Depend On Interview

We are looking for an Aircraft Maintenance Engineer to ensure the safe and efficient operation of aircraft. The position is based in Kannur, and we invite candidates with 0 to 6 years of experience, including fresh graduates who have completed their 12th grade.**Key Responsibilities:**- **Perform Routine Inspections:** Conduct regular checks on aircraft systems and components to identify and rectify any issues before they affect flight safety.- **Carry Out Repairs and Maintenance:** Fix mechanical and electronic issues in aircraft, ensuring all repairs adhere to safety guidelines and regulatory standards.- **Document Maintenance Activities:** Keep clear records of all maintenance work, inspections, and repairs conducted on the aircraft for compliance and future reference.- **Collaborate with Team Members:** Work closely with a team of engineers and technicians to ensure all aircraft are maintained efficiently and safely.- **Stay Updated on Procedures:** Regularly review and understand aviation regulations and maintenance standards to ensure compliance during inspections and repairs.**Required Skills and Expectations:**Candidates should have a strong attention to detail to identify potential safety issues. Good problem-solving skills are essential to troubleshoot and resolve maintenance challenges. Strong teamwork and communication abilities are expected, as collaboration with colleagues is key in this role. Basic computer skills are important for maintaining records and utilizing maintenance software. A proactive approach to learning and staying updated on the latest technology and processes in aviation maintenance is also highly valued.

Hiring for 38 Jobs in Aircraft Maintenance at Aviation Industry Jobs in Kurnool, Visakhapatnam, Itanagar, Patna, Vadodara, Belagavi, Kochi/Cochin, Mumbai, Bhubaneswar, Jaipur, for Freshers,Required Educational Qualification is : Secondary School, I.T.I., B.Arch, B.C.A, B.E, B.Tech, Other Bachelor Degree, Post Graduate Diploma, M.Tech, Any Master Degree with Good knowledge in Aircraft Maintenance, Aircraft Servicing, Aircraft Engineer, Aircraft Mechanic, Aircraft Technician, Aircraft Supervisor, Aircraft Maintenance Engineer, Aircraft Maintenance Technician, Electrical Engineer, Mechanical Engineer, Civil Engineer, Aeronautical Engineer etc.

OverviewThe Aircraft Maintenance Department is responsible for ensuring the airworthiness, safety, and operational reliability of an airlines fleet. The department performs routine maintenance, inspections, troubleshooting, and repairs on aircraft systems and components in compliance with aviation regulations and manufacturer guidelines. The team ensures that aircraft are maintained to the highest safety and operational standards, supporting on-time flight operations.Key Responsibilities Maintenance & RepairsPerform scheduled (line and base) maintenance, inspections, and preventive checks.Troubleshoot mechanical, hydraulic, pneumatic, and avionics systems.Repair or replace defective aircraft components in accordance with manufacturer manuals.Conduct engine checks, landing gear maintenance, and structural inspections.Maintain aircraft interiors, including seating, cabin systems, and emergency equipment. Documentation & ComplianceMaintain detailed records of maintenance activities, defects, and repairs.Ensure compliance with aviation regulations (DGCA, FAA, EASA, etc.) and airline SOPs.Prepare reports for regulatory audits and inspections.Ensure proper documentation of part replacements and maintenance logs. Safety & Quality AssuranceMonitor aircraft systems for potential issues and perform proactive maintenance.Ensure adherence to all safety, health, and environmental regulations.Participate in safety audits, inspections, and risk assessments.Report hazards, non-conformances, or technical issues promptly. Team CoordinationCoordinate with flight operations, ground staff, and technical control teams.Assist engineers and technicians during troubleshooting or major repairs.Support training and mentoring of junior maintenance staff. Technical & Operational SupportPerform software updates and troubleshooting for avionics and onboard systems.Test aircraft systems to verify proper functioning after maintenance.Recommend improvements in maintenance procedures and processes.Manage spare parts inventory, tools, and equipment for maintenance operations.Skills & CompetenciesTechnical Skills:Strong knowledge of aircraft systems (avionics, engines, hydraulics, pneumatics)Proficiency in maintenance software and diagnostic toolsAbility to read and interpret technical manuals, blueprints, and schematicsKnowledge of aviation safety standards and regulatory requirementsSoft Skills:Problem-solving and analytical thinkingAttention to detail and high level of accuracyTeamwork and effective communicationAbility to work under pressure and meet tight deadlinesPersonal Attributes:Commitment to safety and qualityReliability, discipline, and professionalismAdaptability to shift work and emergency maintenance situationsEducational QualificationsDiploma or Bachelors degree in Aeronautical Engineering, Mechanical Engineering, or Aircraft Maintenance Engineering (AME)Certifications in Aircraft Maintenance and Repair (DGCA-approved AME license for India, FAA/EASA certifications for international roles)ExperienceEntry Level: Freshers with relevant educational background and training may apply.Experienced: 06 years of experience in aircraft maintenance, line/base maintenance, or technical operations preferred.Work EnvironmentHangars, maintenance bays, and airport operational areasExposure to aircraft engines, hydraulics, and avionics systemsShift-based schedules, including nights, weekends, and emergency call-outsAdherence to strict safety protocols and PPE requirements

We are looking for a passionate Electrical Engineer to join our team in Nashik. This role is ideal for fresh graduates who hold a B.E in Electrical Engineering. As an Electrical Engineer, you will be expected to design, develop, and maintain electrical systems while working in a team-oriented environment.**Key Responsibilities:**- **Design Electrical Systems**: Create and develop electrical system layouts and specifications, ensuring they meet safety and performance standards.- **Conduct Testing and Assessments**: Perform tests on electrical systems and components to ensure they operate effectively and comply with regulatory standards.- **Troubleshoot Problems**: Identify and solve issues in electrical systems, using analytical skills to find solutions quickly and efficiently.- **Collaborate with Teams**: Work closely with other engineers and departments to integrate electrical systems with mechanical and software components.- **Prepare Technical Documentation**: Document designs, tests, and procedures to maintain standards and provide clear guidelines for future reference.**Required Skills and Expectations:**Candidates must have a Bachelor of Engineering in Electrical Engineering. Strong problem-solving skills and the ability to work well in a team environment are crucial. Familiarity with electrical design software and tools is preferred, but training will be provided. Excellent communication skills, both written and verbal, are necessary to convey ideas clearly. A strong attention to detail and a commitment to following safety protocols will ensure success in this role.

We are looking for a dedicated Electrical Engineer to join our team in Nashik. This role is suitable for fresh graduates holding a Bachelor of Engineering (B.E) in Electrical Engineering. As an Electrical Engineer, you will work on various projects, ensuring that electrical systems function efficiently and safely.**Key Responsibilities:**- **Design Electrical Systems:** Create and develop electrical system designs based on project requirements to ensure they meet industry standards and regulations.- **Conduct Tests:** Carry out tests on electrical equipment and systems to verify their performance and identify any issues or areas for improvement.- **Troubleshoot Problems:** Diagnose and resolve electrical issues swiftly to minimize downtime and ensure the reliability of electrical systems.- **Prepare Documentation:** Document design specifications, test results, and maintenance processes to maintain clear records for current and future reference.- **Collaborate with Teams:** Work alongside other engineers and project teams to contribute to interdisciplinary projects and share knowledge.**Required Skills and Expectations:**Candidates should possess strong problem-solving abilities and critical thinking skills. A foundational knowledge of electrical systems, circuits, and safety protocols is essential. Additionally, proficiency in using design software and simulation tools is preferred. Good communication skills are important for collaborating with teammates and presenting technical information clearly. A proactive attitude toward learning and adapting to new technologies is also expected in this role.

Quality/MaintenanceFreshers-MaleSal-15 K to 18 k8 Hours+Canteen Facility.Satpur..................................................................................................................

We are looking for a skilled Electrical Engineer with 5 to 6 years of experience to join our team in Pune, India. The successful candidate will be responsible for designing, developing, and maintaining electrical systems and components.Key Responsibilities:1. **System Design and Development**: Create and develop detailed electrical designs for various projects, ensuring they meet industry standards and client requirements.2. **Troubleshooting and Maintenance**: Diagnose and resolve electrical issues in existing systems, conducting regular maintenance to ensure optimal performance.3. **Project Coordination**: Collaborate with project managers and other engineers to coordinate project timelines, requirements, and deliverables effectively.4. **Compliance and Quality Control**: Ensure all electrical work complies with safety regulations and quality standards, conducting regular checks and documentation.5. **Technical Support**: Provide technical assistance and guidance to team members and clients, helping to resolve any electrical-related queries.Required Skills and Expectations:The ideal candidate should hold a diploma in Electrical Engineering and have proven experience in the field. Strong knowledge of electrical design principles, system installation, and maintenance practices is essential. Excellent problem-solving abilities, attention to detail, and strong interpersonal skills are required. The candidate must be comfortable working in an office environment and be capable of collaborating with diverse teams to achieve project goals. Being proactive, organized, and effective in communication will contribute greatly to the success of the projects undertaken.

We are seeking an enthusiastic Electrical Engineer to join our team in Bangalore. This role is ideal for recent graduates or those with up to two years of experience who are eager to grow and learn in the field of electrical engineering.Key Responsibilities:1. **Design and Development**: You will create and improve electrical systems and components for various projects. This includes using software tools to simulate and analyze designs.2. **Testing and Evaluation**: Conduct tests on electrical systems and components to ensure they meet safety and performance standards. Your findings will help refine products and ensure reliability.3. **Troubleshooting**: Identify and fix issues in existing electrical systems. This requires strong analytical skills to diagnose problems and implement effective solutions.4. **Collaboration**: Work closely with other engineers and team members to support project goals. Good communication is essential as you will share ideas and updates with the team.5. **Documentation**: Maintain clear records of designs, tests, and project progress. Effective documentation is key to ensuring all stakeholders are informed.Required Skills and Expectations:Candidates should possess a degree in Electrical Engineering or a related field. Strong problem-solving skills and attention to detail are crucial. Familiarity with design software is advantageous. A willingness to learn and adapt in a fast-paced environment is essential. Professionalism and a team-oriented attitude are expected to thrive in this role.

As an Electrical Engineer, you will be responsible for designing, developing, and maintaining electrical systems and components. Your key responsibilities will include analyzing electrical systems, troubleshooting issues, and ensuring compliance with safety standards. Additionally, you will collaborate with other engineers to improve system efficiency and performance.To excel in this role, you must have a diploma in electrical engineering and 0-2 years of experience in a similar role. Strong problem-solving skills, attention to detail, and the ability to work well in a team are essential. You should also have knowledge of electrical engineering principles, experience with electrical design software, and a commitment to meeting project deadlines. The ideal candidate will be a male engineer who is eager to learn and grow in the field of electrical engineering. This is a full-time position based in Noida, India, requiring you to work from the office.

Installs, Calibrates, Maintains, and Repairs Industrial Weighing Equipment, Including Load Cells, Weighbridges, and Electronic Scales. They Troubleshoot Faulty Systems, Perform On-site Repairs, and Provide Technical Customerkey Responsibilitiesinstallation & Calibration: Fit, Install, and Calibrate Electronic Weighing Scales, Benches, and Heavy-duty Load Cell Modules.maintenance & Repair: Diagnose, Maintain, and Repair Faulty Electronic Components, Circuitry, Load Cells, and Weighing Systems.technical Support: Provide Troubleshooting, Service Support (on-site or Telephone), and Training to Customers On Proper Equipment Use.documentation: Produce Service Reports, Maintenance Logs, and Technical Reports.assembly: Assemble Electrical Components in Production Settings.

Job for BE / BTech , diploma holder (Electrical)Candidate job profile :-As a Service Engineer with a specialization in Electrical Engineering, you'll be responsible for maintaining and improving electrical systems. Your role will involve troubleshooting issues, performing regular maintenance, and ensuring systems operate efficiently and safely. This position requires on-site support, technical expertise, and strong problem-solving skills.Responsibilities:-Troubleshoot and resolve electrical system issues.Perform regular maintenance and inspections of electrical systems.Ensure compliance with safety and regulatory standards.Collaborate with other engineers and technicians to improve efficiency.Document service and maintenance activities accurately.Provide on-site technical support as needed.Manage and prioritize a schedule of multiple service tasks.Job location Navi Mumbai Salary- 15k + 3k(Travel allowance)If interested please share your update resume my WhatsApp 9136330489 or email id info@maanarmadafouncdation.co.in

Job for BE, BTech, Electrical diploma holder candidateCandidate job profile :-As a Service Engineer with a specialization in Electrical Engineering, you responsible for maintaining and improving electrical systems. Your role will involve troubleshooting issues, performing regular maintenance, and ensuring systems operate efficiently and safely. This position requires on-site support, technical expertise, and strong problem-solving skills.ResponsibilitiesTroubleshoot and resolve electrical system issues.Perform regular maintenance and inspections of electrical systems.Ensure compliance with safety and regulatory standards.Collaborate with other engineers and technicians to improve efficiency.Document service and maintenance activities accurately.Provide on-site technical support as needed.Manage and prioritize a schedule of multiple service task