Calibration Jobs in

About Hari Om Tatsat TechnologiesHari Om Tatsat Technologies is a growing Technology company focused on delivering innovative digital solutions in Industrial Automation, software development (IT / OT / IoT), Advanced Linux and CyberSecurity.We are looking for highly motivated IT Sales Freelancers who can generate leads, connect with businesses, and close deals for our Data Acquisition solution - HOT DAQ Solution.ResponsibilitiesGenerate new business leads around MumbaiReach out to Pharmaceutical Analysis, Environmental Monitoring, Food & Beverage Industry, Clinical Diagnostics, Chemical Research, Forensic Science, Biotechnology and Life Sciences, Cosmetic Industry, Polymer & Material Science, Petroleum & Petrochemical IndustryPitch HOT DAQ Solution and capabilities to automation solution with other devicesConduct client meetings via call, on-line or in-personUnderstand client requirements and coordinate with internal teamsFollow up with potential clients and maintain relationshipsMaintain sales reports and pipeline updatesProducts You'll Be SellingHOT DAQ SolutionRequirementsGood communication and negotiation skillsBasic understanding of IT Software industryExperience in sales/business development is a plusAbility to work independentlyStrong networking and lead generation skillsLaptop and internet connection requiredCompensationAttractive commission on every successful dealPreferred CandidatesFreelancersSales ExecutivesIndividuals with existing business networks

Seeking a skilled Testing & Commissioning Engineer to plan, execute, and supervise the testing, pre-commissioning, commissioning, and handover of MEP systems. The role involves verifying system performance, identifying defects, coordinating inspections and approvals, maintaining commissioning documentation, and ensuring all mechanical, electrical, plumbing, firefighting, fire alarm, ELV, HVAC, and BMS systems operate safely and efficiently in accordance with project specifications and applicable standards.Key Responsibilities:Prepare testing and commissioning plans, procedures, schedules, and checklists for MEP systems.Coordinate commissioning activities with project managers, consultants, subcontractors, and clients.Conduct pre-commissioning inspections to verify installation quality and compliance with approved drawings.Perform testing and commissioning of HVAC, electrical, plumbing, firefighting, fire alarm, ELV, and BMS systems.Verify equipment installation, functionality, and performance against project specifications.Conduct functional performance tests and integrated systems testing.Identify defects, prepare punch lists, and coordinate timely rectification.Ensure compliance with applicable standards, local authority regulations, project specifications, and safety requirements.Prepare commissioning reports, inspection records, test certificates, and related technical documentation.Coordinate third-party inspections and obtain necessary authority approvals.Prepare operation and maintenance manuals, as-built documentation, and commissioning dossiers for project handover.Support facility management teams during the Defects Liability Period (DLP).Ensure compliance with quality, health, safety, and environmental (QHSE) policies.Maintain testing equipment and ensure proper calibration of instruments.Required Skills & Qualifications:Bachelor's degree or Diploma in Mechanical Engineering, Electrical Engineering, or a related engineering discipline.3-8 years of experience in MEP testing and commissioning.Strong knowledge of HVAC equipment, including AHUs, FCUs, chillers, and pumps.Understanding of LV electrical systems, DG sets, transformers, UPS systems, and electrical testing procedures.Experience with firefighting systems, fire pumps, sprinklers, hydrants, and fire alarm systems.Knowledge of plumbing, water supply, drainage, smoke management, ELV, and BMS systems.Ability to perform functional testing, identify technical issues, and troubleshoot system faults.Basic knowledge of AutoCAD and proficiency in Microsoft Office.Strong documentation, communication, coordination, and problem-solving skills.Understanding of QA/QC procedures, safety compliance, and authority inspection requirements.Testing and Commissioning or HVAC certifications are advantageous.Knowledge of NFPA standards and IOSH, NEBOSH, OSHA, or electrical safety certifications is preferred.GCC/UAE project experience is an added advantage.

Key ResponsibilitiesCollect daily progress data from site teams, departments, or operational units.Prepare and submit Daily Progress Reports (DPRs) within defined timelines.Verify the accuracy and completeness of data received from stakeholders.Track project activities, productivity, manpower, equipment utilization, and work completion status.Maintain daily records, logs, and report databases.Highlight delays, deviations, risks, and critical issues to management.Coordinate with project managers, engineers, supervisors, and other departments for timely information gathering.Generate weekly and monthly summary reports as required.Ensure proper documentation and record management.Support management with MIS reporting and data analysis.

Job Summary We are looking for an experienced Senior Executive / Engineer - Electrical & Instrumentation (E&I) for an industrial project site in Mundra, Gujarat.The candidate will be responsible for instrumentation maintenance, calibration, loop checking, control valve and MOV troubleshooting, commissioning, field instrumentation, automation system interface, and E&I field execution.The ideal candidate should have strong hands-on experience in industrial/process plant environments and be capable of independently handling field troubleshooting, maintenance, testing, and commissioning activities.Key ResponsibilitiesInstrumentation & Maintenance Perform calibration, testing, maintenance, and troubleshooting of field instruments such as Pressure, Temperature, Level, Flow, RTD, and Thermocouple instruments. Carry out installation, mounting verification, configuration, testing, and commissioning of field instruments. Perform preventive and corrective maintenance of instrumentation systems. Troubleshoot instrument faults and minimize equipment/plant downtime. Handle installation and troubleshooting of vibration sensors for rotating equipment.Control Valves & MOV Perform control valve inspection, stroke checking, calibration, testing, and troubleshooting. Work on Globe, Diaphragm, Gate, Ball, and Butterfly valves. Troubleshoot Motor Operated Valves (MOVs), actuators, feedback signals, interlocks, and control circuits. Conduct functional testing of valves and associated control loops.Loop Checking & Commissioning Execute complete instrument loop checking from field instruments to PLC/DCS/SCADA systems. Perform cable continuity, termination, signal verification, and loop integrity checks. Identify and rectify wiring, signal, polarity, termination, and instrumentation faults. Participate in pre-commissioning, commissioning, cold commissioning, hot commissioning, and start-up activities. Verify field signals, alarms, trips, permissives, and interlocks. . of automation and control systems.Instrument Configuration & Calibration Use HART 375/475 Communicators, Smart Calibrators, TRACS, pressure calibrators, loop calibrators, and multimeters. Configure and troubleshoot smart field instruments. Perform instrument ranging, parameter configuration, diagnostics, and calibration. Maintain proper calibration and testing records.Industrial Communication Troubleshoot industrial communication systems and protocols such as:o HARTo Profibuso Foundation Fieldbuso Industrial Etherneto Industrial Wireless Coordinate with automation/control teams for communication-related issues.Engineering Documentation Read and interpret:o P&IDso Instrument Hook-up Drawingso Instrument Loop Diagrams (ILDs)o Cable Scheduleso Instrument Datasheetso Wiring/Termination Drawingso Instrument Indexo I/O Listso Plant Layouts Verify instrument tagging, installation, cable termination, and field wiring against approved project drawings. Maintain accurate records of calibration, loop checking, testing, maintenance, and commissioning activities.Required Skills Strong hands-on experience in Instrumentation & E&I field activities. Good knowledge of process instrumentation and calibration. Experience in loop checking and commissioning. Practical knowledge of control valves and MOVs. Experience with PLC/DCS/SCADA/HMI systems. Knowledge of VFD configuration and troubleshooting. Hands-on experience with HART Communicator 375/475 and calibration equipment. Knowledge of industrial communication protocols such as Profibus, Foundation Fieldbus, HART, and Ethernet. Ability to read and understand P&IDs, ILDs, Hook-up Drawings, wiring diagrams, and instrument datasheets. Good troubleshooting and problem-solving abilities. Good coordination and communication skills.Qualification B.E. / B.Tech in Instrumentation Engineering or a related engineering discipline from a recognized university/institute.Experience 3-5 years of relevant experience in E&I field execution, instrumentation maintenance, commissioning, or plant operations. Candidates with experience in power plants, process plants, chemical/petrochemical plants, oil & gas, manufacturing, or other heavy industrial projects will be preferred.Candidate Profile Strong field execution and troubleshooting capability. Ability to work independently at an active industrial project site. Good understanding of industrial safety and permit-to-work procedures. Willingness to work at Mundra, Gujarat. Candidates who can join immediately or within 15 days will be preferred. Willingness to relocate to Mundra for the project duration.

We are seeking a dedicated Manufacturing Chemist with 5 to 11 years of experience to work full-time in our Raipur facility. In this role, you will be accountable for producing various pharmaceutical products, including tablets, capsules, ointments, syrups, and veterinary liquids and powders, in compliance with batch manufacturing records (BMR), standard operating procedures (SOP), and good manufacturing practices (GMP).Key responsibilities include operating production equipment and maintaining accurate batch records, ensuring that all production processes adhere to safety and hygiene standards. You will also collaborate closely with the quality assurance and quality control teams to ensure consistency and quality in production activities. To succeed in this role, you should hold a graduate degree, and strong attention to detail is essential. You will need excellent communication skills to coordinate effectively with colleagues and other departments. Prior experience handling production equipment and an understanding of quality control processes will be advantageous. Ensuring compliance with safety regulations and maintaining a clean working environment will also be critical. This position requires working from the office at our Siltara location. All interested candidates must be male, as specified in the job requirements. If you have a passion for manufacturing and quality assurance in the pharmaceutical industry, we invite you to apply.

Biomedical Engineer Experience: 7-9 YearsLocation: BangaloreHiring Company: Talent Zone ConsultantBrief JD:We are hiring a Biomedical Engineer to manage medical equipment, technical support, maintenance and compliance activities across healthcare facilities. The role involves equipment installation, preventive maintenance, troubleshooting, vendor coordination and ensuring medical devices are safe and operational.Key Responsibilities:Manage installation, maintenance and servicing of medical equipment.Perform preventive and corrective maintenance.Troubleshoot biomedical equipment and coordinate repairs.Coordinate with equipment vendors and service providers.Maintain equipment records, service schedules and documentation.Support equipment procurement, evaluation and commissioning.Ensure compliance with hospital safety and equipment standards.Relevant Skillset:Biomedical Engineering, Medical Equipment, Medical Devices, Equipment Maintenance, Preventive Maintenance, Troubleshooting, Installation, Commissioning, Calibration, Vendor Management, Hospital Equipment, Equipment Validation, Healthcare Compliance, Technical Support

We are seeking a Senior QA QC Engineer with 10 to 15 years of experience to join our team in Bhavnagar, India. This role involves thorough inspection, measurement, and technical assessment of marine machinery, including crankshafts, main engines, compressors, and hydraulic pumps/motors.Key responsibilities include conducting calibration, testing, and verification of marine equipment to ensure compliance with quality standards. You will apply your expertise to identify potential issues and implement corrective actions to enhance product reliability and performance. Regular assessments of machinery will be conducted to guarantee optimal functionality.Candidates are expected to possess a graduate degree and demonstrate proficiency in QA/QC processes. Strong technical skills in measuring instruments and an analytical mindset are necessary for effective problem-solving. Familiarity with marine equipment and industry standards will be an advantage. Excellent attention to detail and communication abilities are also essential for collaboration within the team.This is a full-time, office-based position. Fieldwork may be required, along with potential travel to various sites. The candidate should have the ability to use a laptop and mobile devices and must possess a valid driving license. Hours are standard workdays, with weekends off to ensure a balanced work schedule.

As an NDT Coordinator, you will play a vital role in conducting training at our Non-Destructive Testing Institute. With 5 to 10 years of experience, you will be responsible for delivering high-quality training sessions and ensuring compliance with industry standards.Key responsibilities include:- Facilitating and conducting training programs focused on non-destructive testing methods to enhance the skills of aspiring professionals.- Developing training materials and curricula to ensure effective learning experiences.- Monitoring and evaluating trainee performance to provide constructive feedback and support.- Maintaining compliance with ASNT Level 3 standards and promoting best practices in non-destructive testing.To be successful in this role, you are expected to have:- A solid understanding of non-destructive testing principles and practices.- A valid ASNT Level 3 certification, which is essential for conducting specialized training.- Excellent communication skills for effective interaction with trainees and colleagues.- Strong organizational skills to manage training schedules and documentation.This position is a full-time, office-based role located in Greater Noida, India. You will be expected to travel occasionally as required by training demands. A laptop and mobile device will be provided for you to manage your responsibilities effectively. Your commitment and expertise will contribute to the development of a skilled workforce in the NDT field.

JOB PURPOSEThe Manager QA/QC will be responsible for managing the complete Quality Assurance and Quality Control function of the organization.The role will ensure that raw materials, manufacturing processes, finished products and dispatches consistently meet approved drawings, specifications, quality standards, customer requirements and applicable compliance requirements.The Manager QA/QC will establish robust quality systems, lead the QA/QC team, control rejection and rework, manage customer complaints and audits, drive root-cause analysis and CAPA, and continuously improve product and process quality.KEY RESPONSIBILITIESA. Quality Assurance - QA Develop, implement and maintain the company's Quality Management System (QMS). Prepare and implement Quality Policies, SOPs, Work Instructions and Inspection Standards. Establish quality objectives, procedures and KPIs. Conduct internal quality and process audits. Ensure compliance with applicable customer and quality requirements. Review and improve existing quality systems and processes. Establish preventive quality controls to minimize defects. Maintain proper quality documentation and records. Promote a Right First Time and zero-defect culture.B. Quality Control - QCManage and monitor quality at all stages:Incoming Material In-Process Finishing Assembly Final Inspection Packing Dispatch Establish inspection standards and checklists. Ensure incoming material inspection. Ensure in-process inspection at critical manufacturing stages. Conduct and monitor final inspection. Verify dimensions, tolerances, appearance, functionality and surface finish. Ensure products conform to approved drawings, samples and specifications. Ensure non-conforming products are properly identified, segregated and controlled.C. Raw Material & Incoming Quality Develop incoming inspection procedures for:o Brasso Irono Zinco Aluminiumo Steelo Bought-out componentso Packaging materials Verify material specifications, dimensions and quality. Monitor supplier quality performance. Coordinate with Purchase and Stores regarding rejected materials. Maintain supplier rejection records and quality performance data.D. In-Process Quality ControlMonitor quality during: Casting Forging Pressing CNC/VMC machining Drilling Tapping Grinding Buffing Polishing Finishing Plating Powder Coating PVD Assembly Responsibilities include: First-piece approval Process inspection Critical dimension monitoring Process parameter control Defect identification Rejection/rework control Process improvementE. Final Inspection & Product ReleaseEnsure finished products are inspected before dispatch for: Dimensions Tolerances Appearance Surface finish Plating/coating Colour/shade Assembly Functionality Strength/performance Packing Labelling QuantityEnsure products are released for dispatch only after meeting defined quality requirements.CUSTOMER QUALITY MANAGEMENT Handle customer quality complaints professionally and promptly. Investigate customer complaints and identify root causes. Prepare 8D, CAPA and Root Cause Analysis reports. Coordinate customer inspections and quality audits. Maintain customer complaint records and trend analysis. Ensure corrective actions are implemented within agreed timelines. Verify effectiveness of corrective actions. Communicate customer-specific requirements to Production and other departments. Monitor customer satisfaction and recurring quality issues.ROOT CAUSE ANALYSIS & CAPALead quality problem-solving using: 5 Why Analysis Fishbone / Ishikawa Pareto Analysis 7 QC Tools Process Analysis Failure AnalysisResponsibilities: Identify root cause rather than only treating symptoms. Raise NCRs for significant non-conformities. Define corrective and preventive actions. Assign responsibility and target dates. Monitor CAPA closure. Verify effectiveness. Prevent recurrence of defects.SUPPLIER QUALITY MANAGEMENT Evaluate and monitor supplier quality performance. Establish supplier quality standards. Conduct supplier audits where required. Monitor supplier rejection and defect trends. Issue Supplier Corrective Action Requests. Work with Purchase for supplier development. Support approval of new suppliers from a quality perspective. Maintain supplier quality scorecards.CUSTOMER & PRODUCT SPECIFICATION CONTROL Ensure availability of approved drawings and specifications. Ensure production works only against approved drawings/samples. Control drawing revisions and specification changes. Ensure customer-specific requirements are communicated to concerned departments. Establish product inspection standards for new products. Participate in NPD, sampling and product development activities.SURFACE FINISH & PLATING QUALITYEnsure quality control of: Polishing Buffing Electroplating Nickel Chrome Brass finishes Antique finishes PVD Powder Coating Other decorative/protective finishesMonitor defects such as: Scratches Dents Colour variation Uneven finish Stains Peeling Poor adhesion Plating defects Surface roughness Coating thickness variationTESTING & CALIBRATION Establish product testing requirements. Ensure availability of appropriate testing equipment. Monitor calibration of measuring and testing instruments. Maintain calibration schedules and records. Ensure measuring instruments are suitable for their intended application. Coordinate external testing/laboratory requirements where necessary.QUALITY TEAM MANAGEMENT Lead the QA/QC team effectively. Define responsibilities and targets for QC Inspectors. Allocate inspection manpower according to production requirements. Train QC personnel on inspection methods and quality standards. Conduct regular quality meetings. Evaluate team performance. Identify training requirements. Develop quality awareness among production employees. Ensure discipline and consistency in inspection practices.PRODUCTION & CROSS-FUNCTIONAL COORDINATIONWork closely with: Production PPC Tool Room NPD/Sampling Purchase Stores Finishing Maintenance Dispatch MerchandisingThe Manager QA/QC should act as a bridge between Quality and Production, ensuring that quality issues are resolved at the process level without unnecessarily affecting production schedules.QUALITY MIS & REPORTINGPrepare and review: Daily Quality Reports Incoming Inspection Reports In-Process Inspection Reports Final Inspection Reports Rejection Reports Rework Reports NCR Reports CAPA Reports 8D Reports Customer Complaint Reports Supplier Quality Reports Quality KPI Reports Monthly Quality MISAnalyse trends for:Rejection Rework Scrap Customer Complaints Supplier Defects Process Defectsand initiate improvement actions.REQUIRED TECHNICAL SKILLSThe candidate should have strong knowledge of: Builder/Architectural Hardware Manufacturing Brass, Iron, Zinc, Aluminium & Steel Products Engineering Drawings GD&T / Basic Tolerances Measuring Instruments AQL & Sampling Incoming/In-Process/Final Inspection Surface Finishing Plating & Coating QMS ISO 9001 Internal Auditing 7 QC Tools SPC Root Cause Analysis CAPA 8D Problem Solving Supplier Quality Calibration Process Auditing Quality DocumentationCOMPUTER SKILLS Advanced MS Excel Quality MIS Quality Dashboards Data Analysis Pareto Charts Rejection Trend Analysis MS Word PowerPoint ERP/MIS softwareEDUCATIONAL QUALIFICATIONB.Tech / B.E. / Diploma in: Mechanical Engineering Production Engineering Industrial Engineering Metallurgy Quality Engineering or related technical discipline.Certification in ISO 9001, Six Sigma, Quality Auditing or Quality Management will be an advantage.EXPERIENCE8-12 years of relevant experience, preferably in: Builder Hardware Architectural Hardware Brass Hardware Iron Hardware Zinc Hardware Aluminium Hardware Sanitary Hardware Metal Components Engineering Manufacturing Export-oriented ManufacturingExperience in international customer requirements, export quality standards and customer audits will be preferred.

We are seeking an experienced AV Engineer to join our team in Sukhdev Vihar, Delhi. The ideal candidate will have 3-5 years of experience in audio-visual systems, bringing expertise to provide high-quality support and solutions for various AV projects.Key Responsibilities:1. Installation and Setup: You will be responsible for setting up and configuring audio-visual equipment, including projectors, microphones, speakers, and video conferencing systems, ensuring everything is functioning properly.2. Maintenance and Troubleshooting: Regular maintenance of AV systems is crucial. You will identify and resolve technical issues promptly to minimize downtime and ensure smooth operations for all users.3. Collaboration with Teams: Work closely with project managers, IT staff, and other team members to understand AV requirements for events and installations, providing input on the best equipment and solutions.4. User Training: You will conduct training sessions for users, helping them understand how to operate AV systems effectively and troubleshoot minor issues on their own.5. Documentation: Create and maintain detailed documentation of AV setups, including equipment lists and maintenance logs, to ensure consistency and efficiency for future projects.Required Skills and Expectations:Candidates should hold a graduate degree and have strong knowledge of AV technology and systems. Excellent problem-solving skills and the ability to work collaboratively in a team environment are essential. Effective communication skills will help in training users and coordinating with team members. A customer-focused approach and attention to detail are expected to deliver high-quality service consistently.

We are in urgent need of a narrow web Flexo Operator.Salary Range: 30 to 50k. Experience: 5+ years.Should know Shrink Film printing and paper label printing.Location: Noida Sector 90Good Working environment

We are looking for a skilled Tool Room Engineer to join our team in Haridwar. The ideal candidate will have 5 to 8 years of experience in tool design and manufacturing. Key Responsibilities:- Tool Design: Create and develop new tool designs that meet production requirements and improve efficiency. This includes using CAD software for precise designs.- Tool Maintenance: Carry out regular maintenance and repairs on existing tools to ensure they are in good working condition and perform effectively.- Quality Control: Monitor and evaluate the quality of tools produced in the workshop. Ensure that all tools meet industry standards and specifications.- Collaboration: Work closely with other departments, such as production and engineering, to understand tool requirements and provide technical support.- Documentation: Maintain detailed records of all tooling designs, modifications, and maintenance work done to ensure accountability and traceability.Required Skills and Expectations:Candidates must possess a diploma in engineering or a related field. A strong understanding of tool design, manufacturing processes, and materials is essential. Proficiency in CAD software is required to create precise designs. The candidate should have excellent problem-solving skills and the ability to work collaboratively within a team. Attention to detail and a commitment to producing high-quality tools are crucial. The role requires good communication skills to effectively share ideas and provide support to team members.

We are looking for a Multi Skill Technician with 1 to 3 years of experience who is eager to work from home in Janla, Bhubaneswar. This role requires hands-on skills in various technical fields and the ability to solve problems effectively.Key Responsibilities:1. **Maintenance and Repair**: You will be responsible for troubleshooting and fixing mechanical and electrical issues in equipment and machinery, ensuring they operate smoothly.2. **Installation**: You will assist in installing new equipment, ensuring proper setup, alignment, and functioning according to specifications.3. **Regular Inspections**: You will perform routine inspections on machinery and equipment to identify any potential issues before they become serious problems.4. **Documentation**: You will maintain accurate records of repairs, maintenance schedules, and any modifications made to equipment to ensure compliance with standards.5. **Collaboration**: You will work closely with other team members to ensure effective communication and coordination for project completion.Required Skills and Expectations:Candidates should be skilled in both electrical and mechanical aspects of machinery. A strong understanding of tools and equipment is essential. You should be detail-oriented, have good problem-solving skills, and be able to work independently. Excellent communication skills and the ability to prioritize tasks are also important for this role. A background with an I.T.I. certification is required, along with a passion for technical work and a proactive attitude towards learning and development.

Job DescriptionTechnicom Engineers Network is looking for a motivated and technically skilled BMS Engineer to join our team. The candidate will be responsible for the installation, testing, commissioning, operation, troubleshooting and maintenance of Building Management System (BMS) and Building Automation Systems at various projects.Key Responsibilities* Install, configure, test and commission BMS and building automation systems.* Monitor and troubleshoot BMS-related issues at project sites.* Work with HVAC control systems and associated field devices.* Handle BMS controllers, sensors, actuators, panels and related equipment.* Perform system integration and communication testing.* Work with communication protocols such as BACnet, Modbus and other relevant protocols.* Coordinate with project, electrical, HVAC and other technical teams during installation and commissioning.* Carry out preventive maintenance, fault finding and corrective actions.* Prepare and maintain site reports, testing/commissioning records and other technical documentation.* Support project execution and ensure work is completed according to required quality and safety standards.* Travel to project sites as required.Required Skills* Good understanding of BMS / Building Automation Systems.* Knowledge of HVAC controls.* Basic knowledge of DDC / PLC / SCADA will be an advantage.* Knowledge of BACnet / Modbus is preferred.* Ability to troubleshoot electrical/control-system-related issues.* Good communication and coordination skills.* Willingness to work at project sites.

The CNC Machine Maintenance Technician installs, troubleshoots, repairs, and maintains CNC (Computer Numerical Control) industrial machinery. The primary goal is to maximize machine uptime, ensure production accuracy, and perform rigorous preventive maintenance.CNC/VMC/VTL/LatheRoutine Maintenance: Perform scheduled preventive maintenance (PM) on CNC mills, lathes, and routers.Mechanical Repairs: Fix or replace spindles, ballscrews, bearings, linear guides, and gearboxes.Fluid Systems: Troubleshoot and repair hydraulic pumps, pneumatic valves, and coolant systems.Electrical Work: Diagnose faulty wiring, sensors, relays, servo motors, and drive amplifiers.Control Systems: Troubleshoot CNC control boards (e.g., Fanuc, Siemens, Haas, Mazak).Precision Alignment: Geometrically align machine axes using indicators, lasers, and ballbar tests.Documentation: Keep detailed digital logs of machine service history, parts used, and downtime.Safety Compliance: Adhere strictly to Lockout/Tagout (LOTO) procedures and OSHA safety regulations.

We are seeking a Senior Electrician based in Surat, India, with 0 to 5 years of experience. The ideal candidate should have graduated with relevant qualifications and demonstrate strong electrical skills.Key responsibilities include:1. Installation and Maintenance: You will be responsible for installing, maintaining, and repairing electrical systems in various settings. This includes ensuring that all work complies with safety standards and regulations.2. Troubleshooting: You will diagnose electrical issues, identify sources of problems, and implement effective solutions to prevent future issues, ensuring systems function efficiently.3. Project Support: You will assist in planning and executing electrical projects, collaborating with the team to ensure timely completion and adherence to specifications.4. Documentation: You will maintain accurate records, including service reports and project documentation, to track progress and ensure accountability in daily operations.5. Team Collaboration: Working closely with other electricians and technicians, you will share knowledge and expertise to foster a productive work environment.Candidates must possess strong technical skills in electrical systems and a solid understanding of safety protocols. Excellent problem-solving abilities and attention to detail are essential. Effective communication skills are necessary for working both independently and as part of a team. The role requires a commitment to quality workmanship and a proactive approach to learning new techniques and technologies in the electrical field.

We are looking for a Senior LAB Technician to join our team in Bangalore. The ideal candidate will have 8 to 10 years of experience in a laboratory setting, along with a B.Sc degree. This full-time position requires a male candidate to work from the office.Key Responsibilities:- Sample Preparation: Prepare and analyze various samples as per standard operating procedures to ensure accurate results.- Instrument Maintenance: Regularly check and maintain laboratory equipment to guarantee they are functioning correctly and safely.- Data Analysis: Compile and analyze data from experiments, ensuring precise reporting of results for further evaluation.- Quality Control: Perform quality checks on samples and processes to adhere to regulatory standards and laboratory protocols.- Training Team Members: Provide guidance and training to junior lab technicians, ensuring all staff are knowledgeable about procedures and safety measures.- Documentation: Maintain clear and organized records of tests, results, and maintenance performed on equipment for compliance purposes.Required Skills and Expectations:Candidates must have strong analytical skills and attention to detail to ensure laboratory accuracy. Proficiency in laboratory techniques and equipment is essential. Effective communication skills are necessary for collaboration with team members and reporting findings. The ideal candidate should demonstrate strong problem-solving abilities and possess a deep understanding of safety and compliance protocols. A proactive attitude and the ability to work independently will be important for success in this role.

As a Field Maintenance Engineer, you will play a crucial role in ensuring the smooth operation of equipment and systems in various locations. Your primary responsibilities will include:- Conducting Routine Maintenance: You will perform regular maintenance checks on machinery and equipment to prevent malfunctions and ensure optimal performance. - Troubleshooting Issues: When problems arise, you will identify and analyze the root cause of the issues to find effective solutions quickly.- Repairing Equipment: You will be responsible for repairing faulty equipment, which may involve replacing parts, fixing electrical systems, or recalibrating machinery.- Documenting Work: It's essential to keep detailed records of repairs, maintenance schedules, and any parts used, as this helps in future troubleshooting and planning.- Customer Interaction: You will communicate with clients to understand their needs and provide technical support, ensuring they are satisfied with the service provided.- Staying Updated on Technology: You will keep yourself informed about the latest tools and technologies in the field to improve efficiency and service quality.To excel in this role, you should have a solid background in mechanical or electrical systems. Good problem-solving skills are crucial, along with the ability to work independently and as part of a team. Effective communication is essential for interacting with clients and team members. A strong attention to detail will ensure that tasks are completed accurately and safely.

BMS Engineer - Urgent HiringTechnicom Engineers Network is looking for an experienced and technically skilled BMS Engineer to join our team. The candidate will be responsible for handling Building Management System (BMS), Building Automation and HVAC control systems across our projects.Key Responsibilities* Installation, testing and commissioning of BMS and Building Automation systems.* Configuration and monitoring of BMS systems and controllers.* Handling HVAC control systems, sensors, actuators and DDC controllers.* Troubleshooting BMS, HVAC control and communication-related issues.* Carrying out preventive and corrective maintenance of BMS systems.* Working with communication protocols such as BACnet and Modbus.* Coordinating with electrical, HVAC, project and site teams for smooth project execution.* Performing system testing, integration and commissioning at project sites.* Preparing site reports, testing/commissioning documents and other technical records.* Identifying faults and providing appropriate technical solutions.* Ensuring project work is completed according to required quality and safety standards.* Willingness to travel to project sites as required.Required Skills* Strong knowledge of BMS / Building Management Systems.* Hands-on experience in Building Automation.* Knowledge of HVAC Controls and DDC.* Experience in BMS installation, commissioning and troubleshooting.* Knowledge of BACnet / Modbus.* Understanding of sensors, actuators, controllers and BMS panels.* Knowledge of PLC/SCADA will be an added advantage.* Good technical, communication and coordination skills.* Ability to work independently as well as with project/site teams.Educational QualificationDiploma / B.E. / B.Tech in Electrical, Electronics, Instrumentation, Mechanical Engineering or a related field.Experience3-4+ years of relevant hands-on experience in BMS / Building Automation / HVAC Controls is preferred.Candidates with experience in BMS platforms such as Siemens, Schneider, Honeywell, Johnson Controls, Delta, Trane or other similar systems will be preferred.