Technician Job Vacancies in West Bengal

An Aircraft Maintenance Technician is responsible for inspecting, maintaining, repairing, and ensuring the airworthiness of aircraft systems and components. They play a critical role in aviation safety by performing routine maintenance checks and troubleshooting mechanical or technical issues. Key ResponsibilitiesPerform scheduled and unscheduled maintenance on aircraftInspect aircraft systems, engines, and components for faults or wearDiagnose mechanical and electrical issues using testing equipmentRepair or replace defective aircraft partsConduct pre-flight and post-flight inspectionsEnsure compliance with aviation safety regulations and standardsMaintain accurate maintenance logs and documentationCoordinate with engineers, pilots, and ground staffFollow strict safety procedures and quality standards Core DutiesEngine inspection and servicingHydraulic and electrical system maintenanceTroubleshooting avionics and mechanical systemsTesting aircraft performance after repairsUsing technical manuals and diagnostic tools Qualifications & RequirementsDiploma or Degree in Aircraft Maintenance Engineering (AME) or relevant fieldCertification from aviation authorities such as DGCA, FAA, or equivalentValid AME license (preferred)Knowledge of aircraft systems and safety standards Skills RequiredStrong technical and mechanical aptitudeAttention to detail and problem-solving skillsAbility to read technical manuals and diagramsGood communication and teamwork skillsTime management and ability to work under pressure Work EnvironmentAirports, hangars, or maintenance workshopsMay require shift work, weekends, and night dutiesPhysically demanding (standing, lifting, working in confined spaces) Salary Range (India)Fresher: 3 - 5 LPAExperienced: 5 - 15+ LPA

An Aircraft Maintenance Technician (AMT) is responsible for inspecting, repairing, and maintaining aircraft to ensure they are safe, airworthy, and compliant with aviation regulations. This is a safety-critical job where precision, documentation, and teamwork matter every day.Key ResponsibilitiesPerform routine inspections (pre-flight, transit, daily, weekly).Troubleshoot mechanical, hydraulic, electrical, and avionics faults.Repair or replace defective components (engines, landing gear, control systems).Use diagnostic tools, manuals, and maintenance software.Complete and certify maintenance records and logbooks.Ensure compliance with airworthiness directives and safety standards.Coordinate with pilots, engineers, and ground staff.Maintain cleanliness and tool control in work areas.Types of Maintenance WorkLine maintenance quick checks and fixes between flights.Base/heavy maintenance detailed inspections, structural work, major overhauls.Component/shop maintenance repairing parts removed from aircraft.Skills & CompetenciesStrong mechanical and electrical knowledge.Ability to read technical manuals and schematics.Troubleshooting and analytical thinking.Attention to detail and safety awareness.Physical stamina; ability to work in shifts, nights, outdoors.Team coordination and communication.Educational QualificationAME/AMT diploma or degree in aircraft maintenance/aviation engineering.Licensing from aviation authorities (where required).Type rating on specific aircraft is a big advantage.Tools & Equipment UsedHand and power tools.Aircraft jacks and hydraulic rigs.Testing and calibration equipment.Digital maintenance tracking systems.Work EnvironmentAirport ramps.Maintenance hangars.Repair workshops.May involve noise, heights, and varied weather conditions.

Skilled technician who installs, maintains, repairs, and tests electrical systems in residential, commercial, and industrial settings. Their work involves reading technical diagrams, installing wiring, motors, and transformers, troubleshooting faults, and ensuring compliance with safety standards.

Job Description Must have hands on experience in AutoCAD, MS Office, Sketchup, Lumion, Adobe Photoshop and other relevant tools. Having 3D Modelling / 3D rendering / Drafting in AutoCad knowledge. Having knowledge and experience in statutory / preparation of drawings as per requirement of Fire Protection and MEP Services - Architectural Planning (Internal), Space Zone Planning, Renders, Carpentry and Furniture Layout, Faade Design Layout, Flooring, Artwork and Signage layout, Finishes Drawings, Lighting Layout, All Services Layout, Finishes & Equipment Schedule etc. Coordinate and manage interior design projects from start to finish. Develop project plans, timelines, and budgets. Manage contractor relationships and ensure quality control. Oversee procurement of materials and furnishings. Proficiency with design software and project management tools. Must have worked as Project Draftsman in at least one restaurant project for full life cycle from conceptualisation to handing over of facility. Must have exposure in overall MEP (Electrical, Plumbing System, Mechanical, HAVC etc.) works as required for restaurant project. Must visits to project sites, assessing and reporting the design conformity, quality compliance, progress updates, criticalities and suggest improvement strategies. Interface between all Architect, client, engineers, Team Members and stakeholders. Languages to be known, English (writing and communication is must), Bengali, Hindi. Location: Kolkata / Howrah and travelling as requiredProject Exp. Minimum two restaurant projects. Minimum 4 - 5 years work experience in interior design project management. Knowledge in Planning, Interior Designing, MEP Services, other relevant.

This is a leading bus operator with a fleet of over 100 Volvo, Scania, and Tata buses, is looking to recruit skilled technicians. We are seeking assistance in sourcing suitable candidates for the following positions to support our ongoing operations and ensure the highest standards of maintenance and service:**Head Technicians*** Requirements: Strong diagnostic and repair skills, preferably with experience in Volvo and Tata buses.10 years minimum.The salary would be based on the experience and expertise

Job SummaryThe Avionics Engineer is responsible for the design, development, testing, installation, and maintenance of aircraft electronic systems. This role ensures safe, efficient, and compliant operation of avionics equipment including communication, navigation, surveillance, and flight control systems. The engineer works closely with cross-functional teams to support system integration, troubleshooting, upgrades, and continuous improvement in aviation technology. Key ResponsibilitiesDesign & Development:Design, develop, and integrate avionics systems for aircraft and aerospace applications.Create system schematics, wiring diagrams, and interface control documents.Develop embedded software or hardware for avionics components.Testing & Troubleshooting:Conduct system testing, validation, calibration, and verification to ensure performance standards.Diagnose issues in avionics equipment using testing tools and propose corrective actions.Perform root cause analysis for system failures and implement preventive measures.Installation & Integration:Oversee installation and configuration of avionics systems in aircraft.Ensure seamless integration of avionics with electrical, mechanical, and flight control systems.Coordinate with manufacturing, maintenance, and flight operations teams for system implementation.Compliance & Documentation:Ensure compliance with aviation authorities (FAA, EASA, DGCA) and safety standards.Prepare technical reports, maintenance manuals, and certification documentation.Maintain accurate documentation of design changes, test results, and system configuration.Maintenance & Support:Support maintenance teams in periodic inspections, upgrades, repairs, and system checks.Provide engineering support for aircraft modifications, retrofits, and new product introductions. Required Skills & CompetenciesTechnical Skills:Strong knowledge of communication, navigation, surveillance, autopilot, and flight control systems.Expertise in embedded systems, digital/analog electronics, and circuit design.Hands-on experience with avionics protocols (e.g., ARINC 429, MIL-STD-1553, CAN bus).Proficiency in tools such as MATLAB/Simulink, LabVIEW, PSPICE, Altium, Xilinx, or similar.Knowledge of aviation standards DO-178C, DO-254, RTCA, FAA/EASA guidelines.Soft Skills:Analytical and problem-solving ability with strong attention to detail.Effective communication, teamwork, documentation, and time-management skills.Ability to work under pressure and meet strict deadlines. Education & Experience RequirementsBachelors degree in Avionics Engineering, Aerospace Engineering, Electronics & Communication, Electrical Engineering, or related field.(Preferred) Masters degree in Avionics or related specialization.Experience:Entry Level: 02 yearsMid-Level: 37 yearsSenior: 8+ years in avionics engineering or related aerospace domain Work EnvironmentMay require working in aircraft hangars, manufacturing facilities, laboratories, or test sites.Willingness to travel for project support, testing, and system installation.Must adhere to aviation safety regulations and workplace safety protocols. Job Type & CompensationFull-time / PermanentCompetitive salary based on experience and qualificationsBenefits: Health insurance, travel allowance, training & professional development

Job Summary:The Aerospace Engineer is responsible for the design, development, testing, and maintenance of aircraft, spacecraft, missiles, and related systems and components. The role involves applying advanced engineering principles to improve performance, safety, and efficiency, ensuring compliance with industry standards and regulatory requirements.Key Responsibilities: Design & DevelopmentDesign and develop aerospace systems, components, and structures (aircraft, satellites, propulsion systems, etc.).Use CAD and simulation tools (CATIA, SolidWorks, ANSYS, MATLAB, Simulink) to create and test design prototypes.Develop new materials, manufacturing methods, or structural designs to enhance performance.Optimize aerodynamic, thermal, and propulsion system performance. Analysis & TestingConduct aerodynamic and structural analyses using CFD and FEA software.Test prototypes for functionality, safety, reliability, and performance under various conditions.Evaluate data from wind tunnel tests, flight tests, and simulations.Troubleshoot and resolve design or performance issues. Project & System ManagementPlan, manage, and oversee aerospace design or research projects from concept to completion.Integrate subsystems (avionics, propulsion, structures, controls) into a complete vehicle.Coordinate with multidisciplinary teams including electrical, mechanical, and software engineers.Prepare technical documentation, project plans, and progress reports. Research & InnovationConduct R&D for new aerospace technologies, materials, or propulsion systems.Stay updated on emerging trends such as unmanned aerial systems (UAVs), sustainable fuels, and space technologies.Develop innovative solutions to improve flight safety, fuel efficiency, and environmental performance. Compliance & Quality AssuranceEnsure all designs and products comply with aviation regulations and safety standards (FAA, EASA, DGCA, ISO, AS9100).Participate in audits, inspections, and certification processes.Implement quality assurance procedures to ensure reliability and durability of products.Required Skills & Competencies:Strong foundation in aerodynamics, propulsion, thermodynamics, and fluid mechanics.Proficiency in engineering software: CATIA, AutoCAD, MATLAB, Simulink, ANSYS, SolidWorks, or NASTRAN.Analytical and problem-solving abilities for complex engineering challenges.Excellent written and verbal communication skills for technical reporting.Attention to detail and adherence to precision engineering standards.Ability to work independently and as part of a cross-functional team.Strong time management and project coordination skills.Qualifications:Education: Bachelors degree in Aerospace Engineering, Aeronautical Engineering, Mechanical Engineering, or related field.Preferred: Masters degree or specialization in Aerodynamics, Propulsion, or Avionics.Experience: 05 years for entry-level roles; 5+ years for senior positions.Certifications (optional): Professional Engineer (PE), Six Sigma, or Project Management certification.Work Environment:Typically office or laboratory-based, with occasional field or test-site work.Involves collaboration with research institutions, defense organizations, or aviation companies.May include travel to manufacturing plants, airfields, or client sites.Requires adherence to strict safety and confidentiality standards.

Position Summary:The Aeronautical Engineer is responsible for the design, development, testing, and maintenance of aircraft and aerospace systems. The role focuses on improving flight safety, efficiency, and performance while ensuring compliance with aviation standards and regulations. The engineer works closely with design, testing, and manufacturing teams to deliver innovative and reliable aerospace solutions.Key Responsibilities: Design & DevelopmentDesign and develop aircraft components, structures, and systems.Use CAD/CAM software (CATIA, SolidWorks, AutoCAD, etc.) for 2D/3D modeling.Analyze aerodynamic, structural, and propulsion systems to optimize performance.Conduct feasibility studies for new design concepts and prototypes.Collaborate with cross-functional teams on product development and testing. Testing & AnalysisPerform wind tunnel tests, flight simulations, and performance evaluations.Analyze test results to identify design flaws or areas of improvement.Conduct structural and fatigue analysis using tools like ANSYS or MATLAB.Ensure designs meet safety, quality, and regulatory standards (DGCA, FAA, EASA). Production & MaintenanceSupport the manufacturing process by providing technical input and design validation.Assist in maintenance planning, fault diagnosis, and repair of aircraft systems.Evaluate materials and production methods for efficiency and durability. Documentation & CompliancePrepare technical reports, test documentation, and certification papers.Ensure compliance with aviation standards and environmental regulations.Maintain accurate records of design modifications, testing, and approvals. Innovation & ResearchResearch emerging aerospace technologies and materials.Contribute to projects related to UAVs, satellites, or space vehicles.Suggest improvements for existing aircraft systems and components.Skills & Competencies:Strong understanding of aerodynamics, propulsion, and flight mechanicsProficiency in CAD/CAE software (CATIA, ANSYS, MATLAB, SolidWorks)Knowledge of CFD and FEA toolsExcellent problem-solving and analytical skillsGood technical documentation and communication abilitiesTeam collaboration and project management skillsAwareness of aviation safety regulations and standardsQualifications:Education: B.E./B.Tech (M.E./M.Tech preferred)Experience: 05 years (entry-level to mid-level); internship or industry experience preferredCertifications (optional): CATIA, ANSYS, MATLAB, or DGCA-approved trainingWork Environment:Office and lab-based work with occasional visits to test sites or manufacturing unitsCollaboration with design, testing, and maintenance teamsMay involve travel for inspections, trials, or client meetingsJob Titles / Related Roles:Aerospace EngineerAircraft Design EngineerFlight Test EngineerMaintenance Engineer (Aviation)Propulsion Engineer

This is a leading bus operator with a fleet of over 100 Volvo, Scania, and Tata buses, is looking to recruit skilled technicians. We are seeking assistance in sourcing suitable candidates for the following positions to support our ongoing operations and ensure the highest standards of maintenance and service:**Head Technicians*** Requirements: Strong diagnostic and repair skills, preferably with experience in Volvo and Tata buses.10 years minimum. The salary would be based on the experience and expertise

The AC Technician is responsible for diagnosing and repairing air conditioning systems in commercial vehicles. This includes inspecting, testing, and maintaining AC components, as well as performing any necessary repairs or replacements. Key responsibilities for the AC Technician include:- Diagnosing AC system issues and determining the best course of action for repair- Performing routine maintenance on AC systems to ensure optimal performance- Repairing or replacing faulty components as needed- Testing AC systems to ensure proper functioning