Technician Fresher Jobs in Tamil Nadu

- Install and service CCTV, Video Door Phones (VDP), Access Control, Intruder Alarm, Networking, and Smart Home Automation systems.- Perform cable laying, device mounting, termination, testing, and commissioning.- Attend service calls and troubleshoot system issues.- Coordinate with engineers and project managers during project execution.- Maintain site documentation and installation quality standards.- Follow safety procedures and complete assigned work on time.Requirements:- ITI / Diploma or relevant technical qualification.- 1-3 years of experience in CCTV, networking, electrical, or security systems.- Basic knowledge of IP cameras, networking, and electr...

Job TitleAircraft Maintenance Engineer (AME)DepartmentAircraft Maintenance / EngineeringLocationsChennaiJob SummaryAn Aircraft Maintenance Engineer (AME) is responsible for inspecting, maintaining, repairing, troubleshooting, and certifying aircraft to ensure they are safe, airworthy, and compliant with aviation regulations. The role involves carrying out scheduled and unscheduled maintenance on aircraft systems, engines, avionics, electrical components, hydraulic systems, landing gear, and structural components while adhering to the standards established by aviation authorities.Key ResponsibilitiesAircraft Inspection & MaintenancePerform routine, preventive, scheduled, and unscheduled aircraft maintenance.Conduct daily, transit, weekly, A-check, B-check, C-check, and heavy maintenance inspections.Inspect aircraft structures, fuselage, wings, landing gear, flight controls, and engines.Diagnose and rectify aircraft defects using approved maintenance procedures.Replace, repair, and overhaul defective aircraft components.Ensure all maintenance tasks are completed according to the Aircraft Maintenance Manual (AMM).Troubleshooting & RepairsIdentify mechanical, hydraulic, electrical, pneumatic, and avionics faults.Use specialized diagnostic tools and testing equipment.Repair aircraft systems while maintaining manufacturer specifications.Coordinate with engineering teams for complex technical issues.Perform functional tests after repairs to verify serviceability.Engine & Component MaintenanceInspect aircraft engines for wear, leaks, corrosion, and damage.Perform engine servicing, oil changes, filter replacement, and component inspections.Maintain propellers, Auxiliary Power Units (APU), and fuel systems.Monitor engine performance and recommend corrective actions.Avionics & Electrical SystemsInspect communication and navigation systems.Maintain radar, autopilot, cockpit instrumentation, and electrical wiring.Test aircraft electronic systems for operational reliability.Ensure compliance with avionics maintenance procedures.Documentation & ComplianceComplete maintenance logs, inspection reports, and defect records.Maintain aircraft technical documentation accurately.Ensure compliance with aviation regulatory authorities.Certify aircraft for return to service after maintenance (where appropriately licensed).Follow company maintenance policies and quality assurance procedures.Safety & Quality AssuranceFollow all aviation safety regulations and standard operating procedures.Maintain clean and organized work areas.Ensure proper use of Personal Protective Equipment (PPE).Report safety hazards and technical discrepancies immediately.Participate in safety audits and quality inspections.Team CoordinationWork closely with pilots, technicians, quality inspectors, and operations staff.Coordinate maintenance schedules with flight operations.Assist junior technicians with technical guidance and training.Participate in emergency aircraft recovery and AOG (Aircraft on Ground) support.Required QualificationsDiploma or Bachelor's Degree in Aircraft Maintenance Engineering, Aeronautical Engineering, Mechanical Engineering, or Aerospace Engineering.DGCA-approved AME qualification or equivalent aviation authority certification is preferred.Valid Aircraft Maintenance Engineer License (where applicable).Type rating on specific aircraft is an advantage.Relevant experience in aircraft maintenance is preferred.Required SkillsStrong knowledge of aircraft systems and maintenance procedures.Excellent troubleshooting and fault diagnosis skills.Knowledge of aviation regulations and airworthiness standards.Ability to interpret aircraft maintenance manuals and engineering drawings.Strong analytical and problem-solving abilities.Excellent attention to detail.Good communication and teamwork skills.Ability to work under pressure and meet strict deadlines.Computer proficiency in maintenance management software.Good technical documentation skills.Technical KnowledgeAircraft StructuresGas Turbine EnginesHydraulic SystemsPneumatic SystemsElectrical SystemsAvionics SystemsFlight Control SystemsLanding Gear SystemsFuel SystemsAircraft DocumentationMaintenance PlanningAircraft Safety StandardsPreferred CertificationsDGCA Aircraft Maintenance Engineer LicenseEASA Part-66 License (preferred internationally)ICAO-compliant aviation trainingHuman Factors TrainingSafety Management System (SMS) TrainingFuel Tank Safety TrainingEWIS (Electrical Wiring Interconnection System) TrainingAircraft Type Rating CertificationWorking ConditionsAirport hangars, maintenance bases, and line maintenance stations.Rotational shifts including nights, weekends, and public holidays.Outdoor work in varying weather conditions.Physically demanding work involving standing, climbing, bending, and lifting equipment.Exposure to aircraft noise, fuels, lubricants, and hydraulic fluids while following strict safety procedures.Salary Range (India)Fresher: 3.5 - 6 LPA2-5 Years: 6 - 10 LPA5-10 Years: 10 - 18 LPALicensed/Type-Rated AME: 15 - 30+ LPA (depending on airline, aircraft type, and experience)

An Aircraft Maintenance Engineer (AME) is responsible for inspecting, maintaining, repairing, troubleshooting, and certifying aircraft to ensure they are safe, airworthy, and compliant with aviation regulations. The role involves carrying out scheduled and unscheduled maintenance on aircraft systems, engines, avionics, electrical components, hydraulic systems, landing gear, and structural components while adhering to the standards established by aviation authorities.Key ResponsibilitiesAircraft Inspection & MaintenancePerform routine, preventive, scheduled, and unscheduled aircraft maintenance.Conduct daily, transit, weekly, A-check, B-check, C-check, and heavy maintenance inspections.Inspect aircraft structures, fuselage, wings, landing gear, flight controls, and engines.Diagnose and rectify aircraft defects using approved maintenance procedures.Replace, repair, and overhaul defective aircraft components.Ensure all maintenance tasks are completed according to the Aircraft Maintenance Manual (AMM).Troubleshooting & RepairsIdentify mechanical, hydraulic, electrical, pneumatic, and avionics faults.Use specialized diagnostic tools and testing equipment.Repair aircraft systems while maintaining manufacturer specifications.Coordinate with engineering teams for complex technical issues.Perform functional tests after repairs to verify serviceability.Engine & Component MaintenanceInspect aircraft engines for wear, leaks, corrosion, and damage.Perform engine servicing, oil changes, filter replacement, and component inspections.Maintain propellers, Auxiliary Power Units (APU), and fuel systems.Monitor engine performance and recommend corrective actions.Avionics & Electrical SystemsInspect communication and navigation systems.Maintain radar, autopilot, cockpit instrumentation, and electrical wiring.Test aircraft electronic systems for operational reliability.Ensure compliance with avionics maintenance procedures.Documentation & ComplianceComplete maintenance logs, inspection reports, and defect records.Maintain aircraft technical documentation accurately.Ensure compliance with aviation regulatory authorities.Certify aircraft for return to service after maintenance (where appropriately licensed).Follow company maintenance policies and quality assurance procedures.Safety & Quality AssuranceFollow all aviation safety regulations and standard operating procedures.Maintain clean and organized work areas.Ensure proper use of Personal Protective Equipment (PPE).Report safety hazards and technical discrepancies immediately.Participate in safety audits and quality inspections.Team CoordinationWork closely with pilots, technicians, quality inspectors, and operations staff.Coordinate maintenance schedules with flight operations.Assist junior technicians with technical guidance and training.Participate in emergency aircraft recovery and AOG (Aircraft on Ground) support.Required QualificationsDiploma or Bachelor's Degree in Aircraft Maintenance Engineering, Aeronautical Engineering, Mechanical Engineering, or Aerospace Engineering.DGCA-approved AME qualification or equivalent aviation authority certification is preferred.Valid Aircraft Maintenance Engineer License (where applicable).Type rating on specific aircraft is an advantage.Relevant experience in aircraft maintenance is preferred.Required SkillsStrong knowledge of aircraft systems and maintenance procedures.Excellent troubleshooting and fault diagnosis skills.Knowledge of aviation regulations and airworthiness standards.Ability to interpret aircraft maintenance manuals and engineering drawings.Strong analytical and problem-solving abilities.Excellent attention to detail.Good communication and teamwork skills.Ability to work under pressure and meet strict deadlines.Computer proficiency in maintenance management software.Good technical documentation skills.Technical KnowledgeAircraft StructuresGas Turbine EnginesHydraulic SystemsPneumatic SystemsElectrical SystemsAvionics SystemsFlight Control SystemsLanding Gear SystemsFuel SystemsAircraft DocumentationMaintenance PlanningAircraft Safety StandardsPreferred CertificationsDGCA Aircraft Maintenance Engineer LicenseEASA Part-66 License (preferred internationally)ICAO-compliant aviation trainingHuman Factors TrainingSafety Management System (SMS) TrainingFuel Tank Safety TrainingEWIS (Electrical Wiring Interconnection System) TrainingAircraft Type Rating CertificationWorking ConditionsAirport hangars, maintenance bases, and line maintenance stations.Rotational shifts including nights, weekends, and public holidays.Outdoor work in varying weather conditions.Physically demanding work involving standing, climbing, bending, and lifting equipment.Exposure to aircraft noise, fuels, lubricants, and hydraulic fluids while following strict safety procedures.Salary Range (India)Fresher: 3.5 - 6 LPA2-5 Years: 6 - 10 LPA5-10 Years: 10 - 18 LPALicensed/Type-Rated AME: 15 - 30+ LPA (depending on airline, aircraft type, and experience)

A medical coder translates a patient's medical records-such as doctor notes, test results, and diagnoses-into universal, standardized alphanumeric codes used for health records and insurance billing.Main Daily TasksReview charts: Read through physician notes, lab reports, and radiology summaries to understand patient care.Assign codes: Select the correct codes using standard systems like ICD-10 (for diagnoses) and CPT (for medical procedures).Check for errors: Look for missing information or unclear notes in patient files.Protect privacy: Keep all patient data safe, secure, and completely confidential

We are looking Diploma /Any degree graduate for CCTV Technician freshers and experience in Tirchy Location.Skills set: CCTV and Surveillance ,Access Control and Intercom systems,Networking and Cabling ,Installation and MaintenanceImmediate Joiners preferred.

Molecular Biology Lab Assistant- Conduct laboratory experiments and research activities according to established protocols.Perform sample preparation, testing, analysis, and documentation.Apply techniques such as PCR, DNA/RNA extraction, electrophoresis, microscopy, and cell culture, depending on the role.Maintain laboratory equipment, reagents, samples, and records.Analyze and interpret experimental data and prepare reports.Follow laboratory safety, quality-control, and regulatory procedures.Assist in research projects involving genetics, molecular biology, biotechnology, or healthcare applications.Review scientific literature and stay updated on relevant technologies and research.Collaborate with researchers, clinicians, laboratory technicians, and other scientific teams.Support preparation of technical reports, presentations, research documentation, and publications.

Key Responsibilities:Prepare and arrange the operation theatre before surgical procedures.Ensure the availability, cleanliness, sterilization, and proper functioning of surgical instruments and equipment.Assist surgeons, anesthesiologists, and OT nurses during surgical procedures as required.Maintain aseptic techniques and sterile conditions in the operation theatre.Handle, arrange, and transfer surgical instruments safely.Check the functionality of anesthesia equipment, monitors, suction apparatus, and other OT equipment within the assigned scope.Ensure the availability of surgical supplies, consumables, and emergency equipment.Follow infection prevention, biomedical waste management, and hospital safety protocols.Required Skills:Knowledge of surgical instruments and operation theatre procedures.Understanding of aseptic techniques and infection control.Familiarity with OT equipment and sterilization methods.Good communication and teamwork skills.Attention to detail and organizational skills.Ability to work effectively in emergency and high-pressure situations.Commitment to patient safety and professional ethics.

We are looking for an Aircraft Maintenance Engineer in Chennai. This role is essential in ensuring the safety and reliability of aircraft by performing maintenance, repairs, and inspections. The ideal candidate will have a passion for aviation and a keen eye for detail.Key Responsibilities:- Perform Routine Maintenance: Conduct regular checks on aircraft systems and components to ensure they are functioning correctly and safely.- Inspect Aircraft: Carry out detailed inspections before and after flights to identify any potential issues or wear and tear.- Repair and Replace Parts: Fix or replace any faulty parts, ensuring that all repairs meet industry standards and regulations.- Document Work: Keep accurate records of all maintenance performed, including any repairs and inspections, to ensure compliance with aviation regulations.- Collaborate with Team: Work closely with other engineers and technicians to ensure smooth operations and share knowledge on maintenance practices.Required Skills and Expectations:- A minimum of a 12th-grade education is required; prior experience in aircraft maintenance is a plus.- Strong problem-solving skills to identify and resolve issues effectively.- Attention to detail is crucial for safeguarding aircraft safety and operational efficiency.- Effective communication skills are necessary to work collaboratively with team members and report findings clearly.- Must be willing to work in an office environment and be flexible with working hours to meet operational needs.

We are seeking a motivated Junior Engineer to join our team in Anna Nagar, Chennai. This full-time role is suitable for recent graduates and those with up to 2 years of experience in relevant fields.As a Junior Engineer, your key responsibilities will include assisting in the installation and maintenance of electronic low voltage systems such as CCTV and automation systems. You will be involved in networking tasks and will gain hands-on experience on-site. The role requires you to travel for site visits, supporting various projects as necessary. Strong communication skills in both Tamil and English will be essential for effective teamwork and client interactions.To be successful in this role, you should hold a Diploma or Bachelor's degree in Electrical and Electronics Engineering (ECE), Electrical Engineering (EEE), Electronics and Instrumentation (E&I), Computer Science, or a related field. Basic knowledge of electrical and networking concepts is expected. You should be willing to travel and work on-site, which may include the requirement for a valid driving license for travel purposes. Familiarity with ELV systems will be advantageous.Candidates must possess good problem-solving skills and a proactive attitude towards learning. This position offers an excellent opportunity to begin your engineering career in a hands-on environment, working collaboratively with experienced professionals.

Immediate opening for Electrical Technician in leading Manufacturing Industry Location - Chennai salary - 18k to 22k Experience -0yr to 1yr ( in any manufacturing Industry ) No of opening - 5

Analyze Records: Review patient electronic health records (EHR) to understand diagnoses and treatments.Assign Codes: Translate clinical data into standard ICD-10-CM, CPT, and HCPCS Level II codes.Ensure Compliance: Follow strict federal, state, and insurance-specific coding regulations.

An Aircraft Maintenance Engineer (AME) is responsible for inspecting, maintaining, repairing, troubleshooting, and certifying aircraft to ensure they are safe, airworthy, and compliant with aviation regulations. The role involves carrying out scheduled and unscheduled maintenance on aircraft systems, engines, avionics, electrical components, hydraulic systems, landing gear, and structural components while adhering to the standards established by aviation authorities.Key ResponsibilitiesAircraft Inspection & MaintenancePerform routine, preventive, scheduled, and unscheduled aircraft maintenance.Conduct daily, transit, weekly, A-check, B-check, C-check, and heavy maintenance inspections.Inspect aircraft structures, fuselage, wings, landing gear, flight controls, and engines.Diagnose and rectify aircraft defects using approved maintenance procedures.Replace, repair, and overhaul defective aircraft components.Ensure all maintenance tasks are completed according to the Aircraft Maintenance Manual (AMM).Troubleshooting & RepairsIdentify mechanical, hydraulic, electrical, pneumatic, and avionics faults.Use specialized diagnostic tools and testing equipment.Repair aircraft systems while maintaining manufacturer specifications.Coordinate with engineering teams for complex technical issues.Perform functional tests after repairs to verify serviceability.Engine & Component MaintenanceInspect aircraft engines for wear, leaks, corrosion, and damage.Perform engine servicing, oil changes, filter replacement, and component inspections.Maintain propellers, Auxiliary Power Units (APU), and fuel systems.Monitor engine performance and recommend corrective actions.Avionics & Electrical SystemsInspect communication and navigation systems.Maintain radar, autopilot, cockpit instrumentation, and electrical wiring.Test aircraft electronic systems for operational reliability.Ensure compliance with avionics maintenance procedures.Documentation & ComplianceComplete maintenance logs, inspection reports, and defect records.Maintain aircraft technical documentation accurately.Ensure compliance with aviation regulatory authorities.Certify aircraft for return to service after maintenance (where appropriately licensed).Follow company maintenance policies and quality assurance procedures.Safety & Quality AssuranceFollow all aviation safety regulations and standard operating procedures.Maintain clean and organized work areas.Ensure proper use of Personal Protective Equipment (PPE).Report safety hazards and technical discrepancies immediately.Participate in safety audits and quality inspections.Team CoordinationWork closely with pilots, technicians, quality inspectors, and operations staff.Coordinate maintenance schedules with flight operations.Assist junior technicians with technical guidance and training.Participate in emergency aircraft recovery and AOG (Aircraft on Ground) support.Required QualificationsDiploma or Bachelor's Degree in Aircraft Maintenance Engineering, Aeronautical Engineering, Mechanical Engineering, or Aerospace Engineering.DGCA-approved AME qualification or equivalent aviation authority certification is preferred.Valid Aircraft Maintenance Engineer License (where applicable).Type rating on specific aircraft is an advantage.Relevant experience in aircraft maintenance is preferred.Required SkillsStrong knowledge of aircraft systems and maintenance procedures.Excellent troubleshooting and fault diagnosis skills.Knowledge of aviation regulations and airworthiness standards.Ability to interpret aircraft maintenance manuals and engineering drawings.Strong analytical and problem-solving abilities.Excellent attention to detail.Good communication and teamwork skills.Ability to work under pressure and meet strict deadlines.Computer proficiency in maintenance management software.Good technical documentation skills.Technical KnowledgeAircraft StructuresGas Turbine EnginesHydraulic SystemsPneumatic SystemsElectrical SystemsAvionics SystemsFlight Control SystemsLanding Gear SystemsFuel SystemsAircraft DocumentationMaintenance PlanningAircraft Safety StandardsPreferred CertificationsDGCA Aircraft Maintenance Engineer LicenseEASA Part-66 License (preferred internationally)ICAO-compliant aviation trainingHuman Factors TrainingSafety Management System (SMS) TrainingFuel Tank Safety TrainingEWIS (Electrical Wiring Interconnection System) TrainingAircraft Type Rating CertificationWorking ConditionsAirport hangars, maintenance bases, and line maintenance stations.Rotational shifts including nights, weekends, and public holidays.Outdoor work in varying weather conditions.Physically demanding work involving standing, climbing, bending, and lifting equipment.Exposure to aircraft noise, fuels, lubricants, and hydraulic fluids while following strict safety procedures.Salary Range (India)Fresher: 3.5 - 6 LPA2-5 Years: 6 - 10 LPA5-10 Years: 10 - 18 LPALicensed/Type-Rated AME: 15 - 30+ LPA (depending on airline, aircraft type, and experience)

An Aircraft Maintenance Engineer is responsible for inspecting, maintaining, repairing, and ensuring the airworthiness of aircraft systems and components. They ensure that aircraft meet safety regulations and are safe for flight operations by following aviation authority standards.Key ResponsibilitiesInspect aircraft systems, engines, and components before and after flights.Perform routine maintenance, repairs, and overhauls on aircraft.Diagnose mechanical and electrical faults in aircraft systems.Replace or repair defective aircraft parts and components.Ensure compliance with aviation safety standards and regulations.Maintain detailed maintenance records and technical documentation.Conduct troubleshooting on aircraft systems such as engines, landing gear, hydraulics, and avionics.Coordinate with pilots and ground crew regarding aircraft condition and maintenance issues.Test aircraft systems to ensure proper functioning after maintenance.Ensure all work is completed according to aviation authority guidelines.Required SkillsStrong knowledge of aircraft systems and engineering principlesMechanical and technical troubleshooting skillsAttention to detail and safety awarenessProblem-solving abilityAbility to work under pressure and in shiftsGood communication and teamwork skillsEducational QualificationDiploma or Degree in Aircraft Maintenance Engineering (AME) or Aeronautical Engineering.Certification or license from aviation authority (such as DGCA in India).ExperienceFreshers can work as Technicians or Trainees.Experienced engineers may work as Licensed Aircraft Maintenance Engineers.Work EnvironmentAirports and aircraft hangarsAviation maintenance organizationsAirlines and aircraft manufacturing companies

Job Summary:An Aircraft Maintenance Engineer (AME) is responsible for inspecting, maintaining, repairing, and ensuring the airworthiness of aircraft and its components. They ensure that aircraft meet safety standards and aviation regulations before flight operations. AMEs play a critical role in passenger safety and aircraft performance.Key Responsibilities1. Aircraft InspectionPerform routine and scheduled inspections of aircraft systems and components.Examine engines, landing gear, hydraulic systems, avionics, and airframes.Identify mechanical or technical faults and safety issues.2. Maintenance & RepairsCarry out preventive and corrective maintenance on aircraft.Repair or replace damaged aircraft parts and systems.Troubleshoot mechanical, electrical, and avionics problems.3. Testing & TroubleshootingConduct operational and functional tests after maintenance.Diagnose system failures using specialized tools and equipment.Ensure proper functioning of aircraft engines and instruments.4. Documentation & ReportingMaintain accurate maintenance records and technical logs.Prepare inspection and repair reports.Ensure compliance with aviation authority regulations.5. Safety ComplianceFollow aviation safety standards and maintenance procedures.Ensure aircraft meets regulatory requirements before release.Adhere to workplace safety and quality standards.6. CoordinationWork closely with pilots, ground staff, and technical teams.Coordinate with airline operations and engineering departments.Communicate maintenance updates and technical findings.Required SkillsStrong technical and mechanical knowledge.Problem-solving and troubleshooting ability.Attention to detail and accuracy.Knowledge of aircraft systems and aviation regulations.Ability to work under pressure and tight schedules.Good communication and teamwork skills.Educational QualificationDiploma or Degree in Aircraft Maintenance Engineering (AME) or Aeronautical Engineering.Certification approved by aviation authorities (such as DGCA or relevant authority).Training from a recognized aviation institute.Experience RequirementsFresher AMEs may work as trainees or junior technicians.Experience in aircraft maintenance or airline engineering department preferred.Hands-on training or apprenticeship experience is an advantage.Work EnvironmentAirports, hangars, and maintenance workshops.Shift duties including nights, weekends, and holidays.Work may involve noise, heights, and outdoor conditions.