Servo Drives Jobs

Hiring: PLC Automation EngineerLocation: BangaloreExperience: 8-12 YearsIndustry: Industrial Automation / ManufacturingWe are looking for an experienced PLC Automation Engineer to design, develop, commission, and troubleshoot industrial automation systems for manufacturing and production environments.Key Responsibilities:Develop and program PLC-based automation systems.Configure and troubleshoot PLCs, HMIs, and SCADA systems.Integrate sensors, drives, servo systems, and industrial control equipment.Conduct system testing, commissioning, and on-site troubleshooting.Analyze automation faults and implement corrective actions.Coordinate with electrical, mechanical, and production teams.Prepare control logic, technical documentation, and commissioning reports.Key Skills: PLC Programming, Siemens PLC, Allen-Bradley, HMI, SCADA, Industrial Automation, VFD, Servo Drives, Control Systems, Electrical Troubleshooting, System Commissioning

* Hands-on experience in PLC programming and industrial automation.* Experience with Mitsubishi, Delta, Siemens, and INOVANCE PLCs.* Hands-on experience in Servo Motor and Servo Drive projects.* Experience in AC Drives / VFDs, including configuration, commissioning, parameterization, and troubleshooting.* Experience in motion-control applications, including positioning, indexing, synchronization, and speed control.* Develop, modify, and troubleshoot PLC programs and machine sequences.* Experience in HMI programming, including alarms, recipes, parameters, counters, and diagnostics.* Hands-on experience integrating PLC, HMI, Servo Drives, AC Drives, sensors, encoders, and pneumatic systems.* Experience in PLC I/O configuration, testing, and troubleshooting.* Hands-on experience in machine commissioning, installation, trial runs, and production support.* Strong troubleshooting skills in PLC, Servo, VFD, HMI, sensors, and communication systems.* Knowledge of industrial communication protocols such as Modbus, Ethernet, CAN/CANopen, PROFINET, etc.* Ability to read and understand electrical control drawings and wiring diagrams.* Experience in new machine development, automation projects, and machine modifications.* Experience in servo tuning, drive parameter setting, homing, positioning, and fault diagnosis.* Knowledge of pneumatic systems, sensors, actuators, and control panels.* Experience in machine cycle-time optimization and productivity improvement.* Maintain PLC/HMI/Drive software backups and technical documentation.* Ability to work independently on commissioning, troubleshooting, and project execution.

Plc Programming, Scada Development, Hmi Programming, Installation & Commissioning

Responsibilities:- Develop, implement, and troubleshoot PLC programs for SPM automation machines- Design and optimize control systems for efficiency and reliability- Collaborate with mechanical and electrical teams for project execution- Create documentation, test plans, and commissioning support- Identify and resolve automation system issues

Seeking a PLC Programmer with 4-6 years of experience to work from our office in Vasai East, Mumbai. Key responsibilities include designing, developing, and testing PLC programs for industrial automation systems. The ideal candidate should have a graduate degree in a related field, expertise in PLC programming languages, and the ability to troubleshoot and debug programs efficiently. Experience with various PLC platforms and a strong understanding of industrial control systems is essential. Strong communication skills and the ability to work well in a team setting are also required for this role.

Functional Area: Designing, Projects, Maintenance, Panel Wiring Designing of Industrial Automation and Process Control Systems Programming and Commissioning of PLCs, DCS, HMI, SCADA & Drive Systems Troubleshooting and Service Support Panel Wiring and AMC Work

Senior Electrical Maintenance Engineer* Team handling experience (currently he will be handling a team)* Hands on experience in Electrical machines like Press shop,assembly lines,injection moulding* Core maintenacne works -Preventive maintenance, Breakdown maintenance,Predictive Maintenance,MTBF & MTTR)* ISO Audit and documentation knowledge ( PM/History card/CBM/TBM/why-why analysis)* PLC/SERVO & HMI Programming knowledge (omron/mitsubishi)* Good communication & presentation skills* Kaizens/Improvement* Candidate already working as a senior engineer is preferable (or) already working as an Engineer for last 4years is preferable Must have a good communication skills.

You will work as part of a Team and Individually with Little Supervision. Understand Client Requirements and how they translate in Application Features. Collaborate with a Team of PLC Professionals to set Specifications for new Applications. Write high quality Source Code to program complete applications within Deadlines. Perform Unit and Integration Testing before Launch. Conduct Functional and Non-functional Testing. Troubleshoot and Debug Applications. Evaluate Existing Applications to Reprogram, Update and add new features. Develop Technical Documents and Handbooks to accurately represent Application Design and Code. Proven experience as Application Developer. Experience in Designing and Building Applications. In-depth knowledge of PLC and HMI Programming with diverse Development Tools. Excellent understanding of Software Design and Programming Principles. A team player with excellent Communication Skills. Eager to Travel all over India for the Development / Installation / Service Support.

You will work as part of a Team and Individually with Little Supervision. Understand Client Requirements and how they translate in Application Features. Collaborate with a Team of PLC Professionals to set Specifications for new Applications. Write high quality Source Code to program complete applications within Deadlines. Perform Unit and Integration Testing before Launch. Conduct Functional and Non-functional Testing. Troubleshoot and Debug Applications. Evaluate Existing Applications to Reprogram, Update and add new features. Develop Technical Documents and Handbooks to accurately represent Application Design and Code. Proven experience as Application Developer. Experience in Designing and Building Applications. In-depth knowledge of PLC and HMI Programming with diverse Development Tools. Excellent understanding of Software Design and Programming Principles. A team player with excellent Communication Skills. Eager to Travel all over India for the Development / Installation / Service Support.

Assistant Electronic EngineerResponsibilities1. Program Development and Implementation: Designing and writing PLC programs: This involves translating process requirements and control logic into ladder logic, function block diagrams, structured text, or other PLC programming languages. Implementing Human-Machine Interfaces (HMIs): Designing and configuring HMIs for operator interaction and visualization of process data. Testing and debugging programs: Thoroughly testing programs in simulated and real-world environments to identify and resolve errors.2. System Integration and Commissioning: Integrating PLCs with other automation components: Connecting PLCs to sensors, actuators, motors, and other devices. Commissioning and start-up of automated systems: Overseeing the installation, testing, and start-up of automated systems, ensuring they function correctly and safely. Troubleshooting and resolving system issues: Diagnosing and resolving problems with PLC programs, hardware, and communication networks. Calibrating instruments and devices: Ensuring accurate and reliable operation of sensors and actuators, temperature meter, etc.3. Maintenance and Support: Maintaining and updating existing PLC programs: Modifying programs to accommodate process changes, improve efficiency, or address issues. Providing technical support to operators and maintenance personnel: Assisting with troubleshooting, training, and documentation. Performing preventive maintenance on PLC systems: Regularly inspecting and testing PLC hardware and software to prevent failures. Documenting PLC programs and system configurations: Documenting the machine operational, troubleshooting and preventive maintenance manual. Creating and maintaining detailed documentation for program logic, hardware configurations, and troubleshooting procedures. Backing up PLC programs: Ensuring the safety of the programs through routine back-ups.4. Communication and Collaboration: Communicating

Technical Skills:PLC Programming Proficiency (Specify brands/platforms e.g., Siemens, Allen-Bradley, Schneider Electric)SCADA System Development & Configuration (Specify brands/platforms e.g., WinCC, FactoryTalk View, Wonderware InTouch)Industrial Communication Protocols (e.g., Modbus, Profibus, Ethernet/IP, OPC)Control System Design & ArchitectureInstrumentation & Control Knowledge (Sensors, Actuators, etc.)Electrical Drawings & Schematics InterpretationTroubleshooting & Problem-Solving Skills in Automation Systems(Optional: Specific software or tools e.g., AutoCAD Electrical)Experience:Minimum [Number] years of experience in PLC SCADA and Industrial Automation projects.Experience in [Specific Industry/Application - e.g., Manufacturing, Oil & Gas, Water Treatment] is preferred.Proven track record of successful project completion.Soft Skills:Strong analytical and problem-solving abilities.Excellent communication (written and verbal) and interpersonal skills.Ability to work independently and as part of a team. Strong organizational and time management skills.Attention to detail and a commitment to quality.

PLC & HMI Programming Application Load, Temperature, Humidity Controller

PLC Programming and Troubleshooting the problem. Logic Development for new machine. Preparation/ checking of electrical drawings for the machine. Monitored the manufacture of electrical device and operation to ensurecompliance with safety protocols. Plant & Machine Breakdown. Relay logic , Sensor logic. Panel Wiring. Star delta starter, Dol starter , Reverse Forward starter. Transformer Maintenance. Basic knowledge of electric control wiring. Servo configuration for all controls (Delta, Estun). AC Drive configuration (Mitsubishi, Siemens). Trouble shooting in electric control panel. Decision Making, critical thinking, organizing and planning.

Looking to hire B.E/B.Tech/Diploma Fresher and experienced PLC Programmer.Candidate should have good Practical Knowledge of Industrial Automation Tools like PLC Programming, commissioning, Interfacing, SCADA system, DCS, HMI Programming, Drives, Panel Designing, AutoCAD Designing and more...contact us on: +91-8882999066

Technical Support

Industrial Robotics EngineerExperience: 8-11 YearsLocation: PuneWe are hiring an Industrial Robotics Engineer to design, program, integrate, and optimize robotic systems and motion-control solutions for industrial automation applications.Key ResponsibilitiesDesign and implement industrial robotic systems and automation solutions.Develop robot programs, motion-control logic, and control sequences.Integrate robots with PLCs, sensors, servo drives, and other automation equipment.Perform robot commissioning, troubleshooting, and performance optimization.Support robotic cell integration and production-line automation.Collaborate with mechanical, electrical, and controls engineering teams.Ensure safety standards, system reliability, and project delivery timelines.Relevant SkillsIndustrial Robotics, Robot Programming, Motion Control, PLC, Servo Drives, Robot Integration, Industrial Automation, ABB Robots, FANUC, KUKA, Siemens PLC, Robot Simulation, Safety Systems, Commissioning, Troubleshooting

Bachelors degree in Electrical, Electronics, Mechatronics, or related engineering fields.6+ years of experience in Process industries with Siemens technologies.Hands-on expertise with Siemens PLCs (S7-1200, S7-1500, S7-300, etc.) and SCADA systems (WinCC, TIA Portal).Strong programming skills in Ladder Logic, Structured Text (ST), or Function Block Diagram (FBD).Proficiency in configuring communication protocols like Profinet, Profibus, and Modbus.Knowledge of industrial safety standards and practices.Experience with servo and VFD drives (e.g., Sinamics).Familiarity with industrial sensors, actuators, and I/O modules.Strong problem-solving and troubleshooting skills.Excellent communication skills for effective collaboration with teams and clients.

Commissioning of SPM machines with component prove. Commissioning of fixtures on different make machines. Preventive maintenance of SPM machines as per schedule. Troubleshooting of all type breakdowns in SPM machines & Fixtures. Ladder programming & machine interfacing with fixtures, HPP, Coolant tank Do the modification of SPM machine as per requirement KEY SKILLS: Having knowledge of commissioning, installation of SPM machines & PLC based machines. Electrical Maintenance of SPM machines & PLC based machines. Having knowledge of FANUC, MITSUBISHI, Siemens controllers. Knowledge of reading and editing of ladder programming & new program preparation. Knowledge of Proficad software for preparation of electrical circuit. Knowledge of Fanuc ladder 3, GX developer, GX works software of ladder programming. Knowledge of GT designer for HMI screens designing. Basic knowledge of part programs, and macro programming. Knowledge of electric motors, drives, switchgears, and panel wiring. Basic knowledge of hydraulic & pneumatics valves and circuits. Experience of machine modification at customer site.

JD: Designing, Projects, Maintenance, Panel Wiring Designing of Industrial Automation and Process Control Systems Programming and Commissioning of PLCs, DCS, HMI, SCADA & Drive Systems Troubleshooting and Service Support Panel Wiring and AMC Work

You will work as part of a Team and Individually with Little Supervision. Understand Client Requirements and how they Translate in Application Features. Collaborate with a Team of PLC Professionals to set Specifications for new Applications. Write high quality Source Code to program complete applications within Deadlines. Perform Unit and Integration Testing before Launch. Conduct Functional and Non-functional Testing. Troubleshoot and Debug Applications. Evaluate Existing Applications to Reprogram, Update and Add new features. Develop Technical Documents and Handbooks to accurately represent Application Design and Code. Proven experience as Application Developer. Experience in Designing and Building Applications. In-depth knowledge of PLC and HMI Programming with diverse Development Tools. Excellent understanding of Software Design and Programming Principles. A team player with excellent Communication Skills. Eager to Travel all over India for the Development / Installation / Service Support.