Process Inspection Jobs

The Draft is an ISO 9001:2015 certified bakery and caf with FSSAI registration. We are looking for a Food Safety & Quality Executive to take charge of our hygiene, safety and quality systems. You will make sure every product leaving our kitchen and bakery meets food safety regulations and our own quality standards.

Job PurposeThe Quality Controller will be responsible for ensuring that raw materials, components, in-process products and finished products meet defined quality standards, approved drawings, specifications and customer requirements.The role will involve regular inspection at different stages of production, identification of defects, coordination with Production and other departments, maintaining quality records, and supporting corrective and preventive actions.Key ResponsibilitiesA. Incoming Material Inspection Inspect incoming raw materials and bought-out components. Check Brass, Iron, Zinc, Aluminium, Steel and other materials as per specifications. Verify dimensions, quantity, grade, surface condition and material quality. Identify and report defective or non-conforming materials. Maintain incoming inspection records.B. In-Process Quality Control Conduct quality inspections at different stages of manufacturing. Monitor machining, casting, forging, pressing, drilling, grinding, polishing, finishing and assembly processes. Ensure products are manufactured according to approved drawings and specifications. Identify defects at the earliest stage to reduce rejection and rework. Coordinate with Production Supervisors for immediate corrective action.C. Final Inspection Carry out final inspection of finished products before packing and dispatch. Check:o Dimensionso Toleranceso Appearanceo Surface finisho Colour and platingo Functionalityo Assemblyo Packing and labelling Ensure only approved products are released for dispatch.D. Drawing & Measurement Read and understand engineering/product drawings. Check dimensions and tolerances as per approved drawings. Use measuring instruments such as:o Vernier Calipero Micrometero Height Gaugeo Plug Gaugeo Ring Gaugeo Thread Gaugeo Measuring Scales and other inspection equipment. Ensure measuring instruments are properly maintained and calibrated.E. Surface Finish & Plating Inspection Inspect polishing, buffing, plating, powder coating, PVD and other finishing processes. Identify scratches, dents, colour variation, stains, plating defects, roughness and other surface defects. Coordinate with finishing vendors/departments regarding quality problems.F. Defect & Rejection Control Identify, segregate and record rejected products. Maintain daily rejection and rework reports. Analyse recurring quality problems. Communicate major defects immediately to Production and QA/QC management. Support reduction of rejection, rework and customer complaints.G. Quality DocumentationMaintain proper records including: Incoming Inspection Reports In-Process Inspection Reports Final Inspection Reports Rejection Reports Rework Reports NCR Reports Corrective Action Reports Calibration Records Product Inspection Checklists Customer Complaint RecordsH. Root Cause & Corrective Action Participate in investigation of quality problems. Use basic Root Cause Analysis techniques such as 5 Why and Fishbone Analysis. Support implementation of Corrective and Preventive Actions (CAPA). Verify effectiveness of corrective actions.I. Customer & Product Quality Understand customer-specific quality requirements. Ensure production is carried out according to approved samples, drawings and specifications. Support customer inspections and quality audits when required. Assist in investigation and resolution of customer complaints.Required Technical Skills Good knowledge of quality inspection procedures. Knowledge of Brass, Iron, Zinc, Aluminium and other metal hardware. Good knowledge of engineering drawings and tolerances. Knowledge of measuring instruments. Knowledge of surface finishing and plating defects. Knowledge of AQL and sampling inspection. Basic knowledge of 7 QC Tools. Root Cause Analysis and CAPA. Knowledge of calibration and inspection systems. Knowledge of production processes and defect identification.Computer Skills MS Excel MS Word Preparation of inspection reports Basic ERP/MIS knowledge Data entry and quality reportingEducational QualificationDiploma / ITI / B.Tech / B.E. in Mechanical, Production, Metallurgy, Quality or related technical discipline.Candidates with relevant practical experience in manufacturing may also be considered.Experience2-5 years of experience in: Builder Hardware Architectural Hardware Brass Hardware Iron Hardware Zinc Hardware Aluminium Hardware Sanitary Hardware Metal Components Engineering/Manufacturing IndustryExperience in quality inspection and manufacturing processes will be preferred.

Key ResponsibilitiesPerform in-process inspections at various production stages according to quality plans and inspection standards.Verify product dimensions, specifications, appearance, and process parameters using appropriate measuring instruments.Conduct visual, dimensional, and functional inspections of components and finished products.Record inspection results and maintain accurate quality documentation and reports.Identify, document, and report non-conforming products and process deviations.Coordinate with production supervisors and operators to resolve quality issues.Ensure adherence to quality control procedures, work instructions, and customer specifications.Monitor production processes and recommend corrective and preventive actions.Support root cause analysis activities for quality-related issues.Verify implementation and effectiveness of corrective actions.Ensure proper handling and segregation of rejected or non-conforming materials.Participate in internal audits, quality improvement initiatives, and continuous improvement activities.Maintain calibration status awareness of measuring and inspection equipment.

As a QC Welding Inspector in Kanpur, you will play a crucial role in ensuring the quality and reliability of welding processes and products. Your primary responsibilities will include:- Inspecting Welds: Regularly assess welded joints to ensure they meet specified standards and specifications, identifying any defects or inconsistencies.- Conducting Tests: Perform non-destructive tests such as ultrasonic, magnetic particle, or liquid penetrant tests to evaluate the integrity of welds.- Documentation: Maintain detailed records of inspections, tests, and findings to ensure compliance with industry standards and regulations.- Collaboration: Work closely with welders and other production staff to address any issues or improvements needed in the welding process.- Reporting: Prepare reports summarizing inspection results, recommending corrective actions as necessary to enhance quality.To be successful in this role, you should possess:- Educational Background: An I.T.I. certification in Welding or a related field, demonstrating your technical knowledge and skills in the field.- Experience: 1 to 5 years of hands-on experience in welding inspection, showcasing your familiarity with various welding techniques and standards.- Attention to Detail: Strong observational skills to spot defects and issues in welding that may not be immediately visible.- Communication Skills: Ability to convey findings clearly to team members and management, fostering a collaborative environment.- Problem-solving Abilities: Aptitude for identifying issues in welding and recommending solutions effectively to enhance quality and safety.

We are seeking a dedicated Quality Engineer with 2 to 5 years of experience to ensure our products meet high standards of quality at our Alwar office. This role involves continuous improvement and quality assurance processes.Key Responsibilities:1. Quality Inspection: Perform inspections on incoming materials and in-process products to verify they meet specified standards and regulatory requirements.2. Root Cause Analysis: Identify and analyze quality issues through data collection and analysis, using problem-solving techniques to implement effective solutions.3. Process Improvement: Collaborate with production teams to develop and implement quality control processes, improving efficiency and product reliability.4. Audit and Compliance: Conduct internal audits to ensure compliance with quality standards and manufacturing regulations, preparing reports to summarize findings.5. Training and Guidance: Provide training to staff on quality procedures and best practices, fostering a culture of quality within the organization.Required Skills and Expectations:Candidates should hold a diploma in a relevant field and possess strong analytical skills. Attention to detail and the ability to work independently and as part of a team are essential. Effective communication and technical writing skills are important for documenting processes and sharing findings with colleagues. A good understanding of quality management systems and methodologies, such as Six Sigma or ISO standards, is preferred. We are looking for a male candidate who is proactive, motivated, and eager to contribute to our quality assurance efforts.

We are seeking a Process Control Engineer based in Mumbai, India, with 0 to 4 years of experience and a diploma in engineering. This full-time position is ideal for a detail-oriented individual eager to contribute to our engineering team.As a Process Control Engineer, you will be responsible for ensuring that our industrial processes run smoothly and efficiently. You will monitor control systems, analyze process data, and implement improvements to enhance productivity and reduce costs.Key Responsibilities:1. System Monitoring: Regularly check and maintain control systems to ensure they function correctly and meet production targets.2. Data Analysis: Collect and analyze data from various processes to identify trends, variances, and opportunities for optimization.3. Implementation of Improvements: Collaborate with senior engineers to develop and implement process enhancements, focusing on quality and efficiency.4. Troubleshooting: Quickly respond to process disruptions, diagnosing issues and coordinating with team members to resolve them effectively.5. Documentation: Maintain comprehensive records of process changes, enhancements, and troubleshooting efforts to ensure compliance and facilitate knowledge sharing.Required Skills and Expectations:Candidates should possess strong analytical skills and attention to detail, along with a solid understanding of control systems. Effective communication is essential for collaborating with team members and providing clear reports. A willingness to learn and adapt in a fast-paced environment is crucial, as is a commitment to safety and quality standards in engineering practices.

We are seeking a dedicated Fitter to join our team in Coimbatore. The ideal candidate should have 1-2 years of experience in fitting and should have completed at least their 10th grade. This is a full-time position that requires working from the office.Key Responsibilities:- Assembly of Components: You will be responsible for assembling various mechanical parts and components according to specifications and blueprints.- Installation and Maintenance: You will install equipment and machinery, ensuring they are properly set up and operational.- Repair Work: Identify and repair defective parts or machinery to ensure efficient functioning.- Quality Checks: Conduct regular quality checks on assembled parts to meet company standards and specifications.- Tool Handling: Safely use and maintain hand tools, power tools, and machinery required for fitting tasks.- Documentation: Keep accurate records of work completed, including repairs and adjustments, to track maintenance and progress.Required Skills and Expectations:The ideal candidate should have strong problem-solving skills and attention to detail. You should be comfortable working with your hands and have knowledge of basic mechanical systems. Good physical stamina is essential, as the job may involve lifting heavy equipment. Candidates must also demonstrate the ability to read and interpret technical drawings and manuals. Communication skills are important for collaborating with team members and reporting to supervisors. A positive attitude and willingness to learn new skills will be greatly valued in this role.

We are looking for a skilled HBM Operator to set up and operate Horizontal Boring Machines for machining large and heavy engineering components. The candidate should have experience in CNC machining, programming knowledge, and the ability to read engineering drawings while maintaining quality and production standards.Key Responsibilities Set up and operate HBM (Horizontal Boring Machines) for machining operations Perform machine setting, tool setting, and fixture loading Read and interpret engineering drawings and machining requirements Monitor machining operations and maintain production targets Conduct dimensional inspection using precision measuring instruments Ensure quality standards during machining of large components Maintain machine cleanliness and follow 5S practices on the shop floor Maintain production records and follow safety guidelinesSkills Required Strong knowledge of HBM machine operations and setup Understanding of CNC programming (Fanuc / Siemens preferred) Knowledge of large component machining Good understanding of machining parameters for steel and cast iron Ability to read engineering drawings and process sheets Experience in handling precision measuring instruments (Micrometer, Vernier Caliper, Dial Gauge, Bore Gauge) Knowledge of machining processes and tooling Strong attention to quality and safety standards

We are looking for 88 TIG & Arc Welder Posts in Dubai, UAE, with deep knowledge in TIG Welding, Welder, Welding Inspection, TIG Welder, Laser Welding, Automatic Welder, Automatic Welding, Welding Process, Electrician, Plumber and Required Educational Qualification is : 12th Pass, 10th Pass, I.T.I. Direct- Zoom Interview / Calling Interviews Employment Visa Jobs Preferred Location: Dubai, UAE (Not in India)Salary: Depending on the interview,Facilities: Accommodation & Transportation Medical, Food etc.Send me CV: WhatsApp / Email /Telegram /Call meCONTACT NO :+91-8506075088/ 9999074062 ( Ak Gupta)

Fabrication Engineer - RequiredProcess Planning & DevelopmentTechnical SupportQuality & ComplianceCost & Efficiency ImprovementProduction Planning & CoordinationEquipment & Tooling ManagementDocumentation & Reporting

Job Title: In process Inspection Inspector: Fabrication & MachiningBusiness Unit: JLPLReporting to: Quality Manager : In process QualityEmployment Category: Fresher/ Experienced Working Hours: 8 Hours ShiftKey Responsibilities: Conduct Set-up Approval Inspect parts for fabrication clearance (before Machining) Conduct Process Audit Maintain all inspection records as per defined process Ensure all template, gauges & instruments available as per the part requirement Ensure all production instruments duly calibrated & in good condition. Ensure all updated drawings are available in each working station as per part production. Manage non conformity from reporting, rework & preventive action & disposal. Support production team to ensure defect free production. Conduct weld joint penetration test as per plan.Qualifications & Experience: ITI /Diploma/Degree in Mechanical Engineering or related field. 0-5 years of experience in quality assurance / control. Strong analytical skills, leadership, and communication abilities. CTC shall be paid in line with Qualification & Experience.Preferred Skills: Good knowledge in engineering drawing interpretation. Welding & machining knowledge is preferable. Computer knowledge with MS Office is must. Initiative & drive for continuous improvement.

- To do daily in-process inspection at press shop , Anodizing shop, Machine shop based on given checklist & drawing specification.- To do process audit based on given specifications and observation- To make daily inspection report and submit- To monitor rework & rejection and identify the possible root cause and improvement action.

Job Setting and operating of VTL machines like Yu-shine, Hyundai,Taiton,Bullard CNCKnowledge of VTL machines programming.Fully Conversant with Siemens and Fanuc Programming structure and NomenclatureKnowledge of larger size component machining.Knowledge of steel & cast iron machining parametersOperating knowledge of machining processes & Drawing studyKnowledge of measuring instruments such as Micrometers, Vernier caliper, dial indicators, Dial bore gauge & stick micrometer.Implementation of 5S in shop floor

Here is a detailed and highly functional job description for an Industrial Welder. This profile is tailored for engineering, sheet metal, and structural fabrication environments, where precision, blueprint reading, and safety are paramount.Job Description: Industrial Welder / Fabricator Department: Production / Fabrication Shop / MaintenanceReports To: Welding Supervisor / Production Engineer Experience Level: 2-5 years (ITI / Welder Certification preferred)Job Purpose The Welder is responsible for joining metal components, plates, tubes, and structures using various industrial welding techniques based on blueprint specifications. This role requires a high level of manual dexterity, an understanding of metallurgy, and strict adherence to dimensional tolerances to ensure strong, defect-free welded joints that meet rigorous quality standards.Key Responsibilities1. Welding Operations & Techniques Multi-Process Welding: Set up and operate welding equipment to perform high-quality MIG (Metal Inert Gas), TIG (Tungsten Inert Gas), and SMAW (Shielded Metal Arc/Stick) welding based on the material thickness and job specifications.Machine Calibration: Adjust welding machine parameters, including current (amperage), voltage, gas flow rate, and wire feed speed, to match the specific metal type (Mild Steel, Stainless Steel, or Aluminum).Positional Welding: Execute clean and structurally sound welds in various positions, including flat, vertical, horizontal, and overhead positions.2. Fit-Up & Fabrication Support Blueprint Analysis: Read and interpret mechanical engineering drawings, welding symbols, layouts, and process sheets to determine the required weld dimensions and sequences. Pre-Weld Preparation: Clean, grind, bevel, and clamp metal pieces together to ensure a perfect fit-up. Use measuring tools like vernier calipers, pitch gauges, and squares to verify alignment before striking an arc. Tack Welding: Apply precise tack welds to temporarily secure structures in place before executing the final continuous weld bead, preventing thermal warping or distortion.3. Quality Assurance & Defect Prevention Visual Inspection: Conduct immediate post-weld visual inspections to check for common welding defects such as porosity, undercut, slag inclusion, cracks, or lack of penetration.Post-Weld Finishing: Use chipping hammers, wire brushes, and angle grinders to clean slag, remove spatter, and smooth out weld seams for a neat finish.4. Safety & Shop Floor Discipline PPE Enforcement: Operate with absolute compliance regarding welding safety gear, including auto-darkening welding helmets, leather aprons, welding jackets, and heavy-duty heat-resistant gloves.Fume & Fire Safety: Ensure the welding booth extraction systems are active and maintain a clear, hazard-free zone around flammable gas cylinders (Argon, $CO_2$, Acetylene).

In-Process Monitoring: Conduct regular inspections and quality checks on the production line. This includes verifying raw materials, components, and the final product to ensure they meet specified standards.Documentation and Record-Keeping: Maintain meticulous records of all quality checks, test results, and production data. Ensure all batch records and logbooks are accurately filled out and signed.Deviation Handling: Identify and report any deviations or non-conformances from the standard operating procedures (SOPs). Investigate the root cause of these deviations and collaborate with the production team to implement corrective actions.Compliance: Ensure strict adherence to Good Manufacturing Practices (GMP), regulatory guidelines, and company quality policies.Sampling and Testing: Collect samples of products at various stages for laboratory testing. Perform basic in-process tests (e.g., tablet hardness, capsule weight variation, liquid volume).Training: Provide guidance and training to production staff on quality procedures and GMP requirements to foster a culture of quality.

We are looking for 88 TIG & Arc Welder Posts in Dubai, UAE, with deep knowledge in TIG Welding, Welder, Welding Inspection, TIG Welder, Laser Welding, Automatic Welder, Automatic Welding, Welding Process, Electrician, Plumber and Required Educational Qualification is : 12th Pass, 10th Pass, I.T.I. Direct- Zoom Interview / Calling Interviews Employment Visa Jobs Preferred Location: Dubai, UAE (Not in India)Salary: Depending on the interview,Facilities: Accommodation & Transportation Medical, Food etc.Send me CV: WhatsApp / Email /Telegram /Call meCONTACT NO :+91-8506075088/ 9999074062 ( Ak Gupta)

JOB PURPOSEThe Manager QA/QC will be responsible for managing the complete Quality Assurance and Quality Control function of the organization.The role will ensure that raw materials, manufacturing processes, finished products and dispatches consistently meet approved drawings, specifications, quality standards, customer requirements and applicable compliance requirements.The Manager QA/QC will establish robust quality systems, lead the QA/QC team, control rejection and rework, manage customer complaints and audits, drive root-cause analysis and CAPA, and continuously improve product and process quality.KEY RESPONSIBILITIESA. Quality Assurance - QA Develop, implement and maintain the company's Quality Management System (QMS). Prepare and implement Quality Policies, SOPs, Work Instructions and Inspection Standards. Establish quality objectives, procedures and KPIs. Conduct internal quality and process audits. Ensure compliance with applicable customer and quality requirements. Review and improve existing quality systems and processes. Establish preventive quality controls to minimize defects. Maintain proper quality documentation and records. Promote a Right First Time and zero-defect culture.B. Quality Control - QCManage and monitor quality at all stages:Incoming Material In-Process Finishing Assembly Final Inspection Packing Dispatch Establish inspection standards and checklists. Ensure incoming material inspection. Ensure in-process inspection at critical manufacturing stages. Conduct and monitor final inspection. Verify dimensions, tolerances, appearance, functionality and surface finish. Ensure products conform to approved drawings, samples and specifications. Ensure non-conforming products are properly identified, segregated and controlled.C. Raw Material & Incoming Quality Develop incoming inspection procedures for:o Brasso Irono Zinco Aluminiumo Steelo Bought-out componentso Packaging materials Verify material specifications, dimensions and quality. Monitor supplier quality performance. Coordinate with Purchase and Stores regarding rejected materials. Maintain supplier rejection records and quality performance data.D. In-Process Quality ControlMonitor quality during: Casting Forging Pressing CNC/VMC machining Drilling Tapping Grinding Buffing Polishing Finishing Plating Powder Coating PVD Assembly Responsibilities include: First-piece approval Process inspection Critical dimension monitoring Process parameter control Defect identification Rejection/rework control Process improvementE. Final Inspection & Product ReleaseEnsure finished products are inspected before dispatch for: Dimensions Tolerances Appearance Surface finish Plating/coating Colour/shade Assembly Functionality Strength/performance Packing Labelling QuantityEnsure products are released for dispatch only after meeting defined quality requirements.CUSTOMER QUALITY MANAGEMENT Handle customer quality complaints professionally and promptly. Investigate customer complaints and identify root causes. Prepare 8D, CAPA and Root Cause Analysis reports. Coordinate customer inspections and quality audits. Maintain customer complaint records and trend analysis. Ensure corrective actions are implemented within agreed timelines. Verify effectiveness of corrective actions. Communicate customer-specific requirements to Production and other departments. Monitor customer satisfaction and recurring quality issues.ROOT CAUSE ANALYSIS & CAPALead quality problem-solving using: 5 Why Analysis Fishbone / Ishikawa Pareto Analysis 7 QC Tools Process Analysis Failure AnalysisResponsibilities: Identify root cause rather than only treating symptoms. Raise NCRs for significant non-conformities. Define corrective and preventive actions. Assign responsibility and target dates. Monitor CAPA closure. Verify effectiveness. Prevent recurrence of defects.SUPPLIER QUALITY MANAGEMENT Evaluate and monitor supplier quality performance. Establish supplier quality standards. Conduct supplier audits where required. Monitor supplier rejection and defect trends. Issue Supplier Corrective Action Requests. Work with Purchase for supplier development. Support approval of new suppliers from a quality perspective. Maintain supplier quality scorecards.CUSTOMER & PRODUCT SPECIFICATION CONTROL Ensure availability of approved drawings and specifications. Ensure production works only against approved drawings/samples. Control drawing revisions and specification changes. Ensure customer-specific requirements are communicated to concerned departments. Establish product inspection standards for new products. Participate in NPD, sampling and product development activities.SURFACE FINISH & PLATING QUALITYEnsure quality control of: Polishing Buffing Electroplating Nickel Chrome Brass finishes Antique finishes PVD Powder Coating Other decorative/protective finishesMonitor defects such as: Scratches Dents Colour variation Uneven finish Stains Peeling Poor adhesion Plating defects Surface roughness Coating thickness variationTESTING & CALIBRATION Establish product testing requirements. Ensure availability of appropriate testing equipment. Monitor calibration of measuring and testing instruments. Maintain calibration schedules and records. Ensure measuring instruments are suitable for their intended application. Coordinate external testing/laboratory requirements where necessary.QUALITY TEAM MANAGEMENT Lead the QA/QC team effectively. Define responsibilities and targets for QC Inspectors. Allocate inspection manpower according to production requirements. Train QC personnel on inspection methods and quality standards. Conduct regular quality meetings. Evaluate team performance. Identify training requirements. Develop quality awareness among production employees. Ensure discipline and consistency in inspection practices.PRODUCTION & CROSS-FUNCTIONAL COORDINATIONWork closely with: Production PPC Tool Room NPD/Sampling Purchase Stores Finishing Maintenance Dispatch MerchandisingThe Manager QA/QC should act as a bridge between Quality and Production, ensuring that quality issues are resolved at the process level without unnecessarily affecting production schedules.QUALITY MIS & REPORTINGPrepare and review: Daily Quality Reports Incoming Inspection Reports In-Process Inspection Reports Final Inspection Reports Rejection Reports Rework Reports NCR Reports CAPA Reports 8D Reports Customer Complaint Reports Supplier Quality Reports Quality KPI Reports Monthly Quality MISAnalyse trends for:Rejection Rework Scrap Customer Complaints Supplier Defects Process Defectsand initiate improvement actions.REQUIRED TECHNICAL SKILLSThe candidate should have strong knowledge of: Builder/Architectural Hardware Manufacturing Brass, Iron, Zinc, Aluminium & Steel Products Engineering Drawings GD&T / Basic Tolerances Measuring Instruments AQL & Sampling Incoming/In-Process/Final Inspection Surface Finishing Plating & Coating QMS ISO 9001 Internal Auditing 7 QC Tools SPC Root Cause Analysis CAPA 8D Problem Solving Supplier Quality Calibration Process Auditing Quality DocumentationCOMPUTER SKILLS Advanced MS Excel Quality MIS Quality Dashboards Data Analysis Pareto Charts Rejection Trend Analysis MS Word PowerPoint ERP/MIS softwareEDUCATIONAL QUALIFICATIONB.Tech / B.E. / Diploma in: Mechanical Engineering Production Engineering Industrial Engineering Metallurgy Quality Engineering or related technical discipline.Certification in ISO 9001, Six Sigma, Quality Auditing or Quality Management will be an advantage.EXPERIENCE8-12 years of relevant experience, preferably in: Builder Hardware Architectural Hardware Brass Hardware Iron Hardware Zinc Hardware Aluminium Hardware Sanitary Hardware Metal Components Engineering Manufacturing Export-oriented ManufacturingExperience in international customer requirements, export quality standards and customer audits will be preferred.

As a QC Welding Inspector, you will ensure the quality and safety of welding processes and structures in our projects. Your primary focus will be on inspecting welds and ensuring that they meet the required standards.Key Responsibilities:- Weld Inspection: Regularly examine welded joints to check for defects, ensuring compliance with technical specifications and standards.- Documentation: Maintain detailed records of inspections, including reports of non-conformance and corrective actions taken.- Quality Standards Compliance: Ensure that all welding activities adhere to relevant quality standards and regulations to guarantee safety and reliability.- Collaboration: Work closely with the welding team and engineers to provide feedback on welding practices and suggest improvements.- Training Support: Assist in training and guiding new staff on welding inspection techniques and quality control processes.Required Skills and Expectations:- Educational Background: Candidates should have completed I.T.I. in a relevant field.- Experience: A minimum of 1 to 5 years of experience in welding inspection, with a solid understanding of welding processes and standards.- Technical Skills: Familiarity with various welding techniques and inspection tools is essential.- Attention to Detail: Ability to spot defects or issues in welds, ensuring all work meets quality expectations.- Communication Skills: Strong verbal and written communication skills to effectively report findings and collaborate with team members.- Gender Specification: This role is specifically for male candidates, as per organizational requirements.

We are looking for a QC Welding Inspector to join our team in Ludhiana. The ideal candidate should have experience in quality control, particularly in welding processes, and will be responsible for ensuring that all welding work meets strict quality standards. Key Responsibilities:- Inspect Welding Work: Review and assess completed welding tasks to ensure they meet specifications and quality standards.- Conduct Tests: Perform various inspections and tests, such as visual evaluations and non-destructive tests, to confirm the integrity of welds.- Document Findings: Maintain detailed records of inspections, test results, and compliance with standards to ensure traceability and quality assurance.- Report Issues: Identify and report any defects or issues in welding to the relevant teams for corrective actions.- Collaborate with Teams: Work closely with welders and engineers to communicate inspection results and provide constructive feedback for improvement.- Stay Updated: Keep current with welding standards and quality control regulations to ensure compliance with industry requirements.Required Skills and Expectations:- Candidates should have an ITI certification and a minimum of 1-5 years of experience in a welding quality control role.- Strong knowledge of welding processes, techniques, and materials is essential.- Good observation and analytical skills to accurately identify defects.- Ability to interpret technical drawings and specifications.- Effective communication skills to relay information clearly to team members and management.- Must be able to work from the office and contribute to a team-oriented environment.