Machine Shop Engineer Jobs

We are looking for a Machine Shop Supervisor to oversee operations in our workshop. The ideal candidate will ensure that all processes run smoothly and efficiently while managing the team. Key Responsibilities:- Supervise Daily Operations: Oversee the daily activities in the machine shop to ensure production goals are met and quality standards are maintained.- Manage Team Performance: Lead and support shop personnel, providing guidance and training to enhance skills and efficiency.- Quality Control: Implement and enforce quality checks to ensure all finished products meet the required specifications and standards.- Maintain Equipment: Ensure that all machinery is well-maintained and safe to operate, coordinating repairs and service schedules as necessary.- Inventory Management: Monitor inventory levels of materials and tools, placing orders as needed to ensure continuous operations without delays.- Safety Compliance: Promote a safe working environment by ensuring all team members adhere to safety regulations and best practices.Required Skills and Expectations:Candidates should have a diploma in a relevant field and demonstrate a strong understanding of machining processes. Attention to detail is critical, along with problem-solving skills to address any challenges that arise in production. Effective communication abilities are essential for leading the team and coordinating with different departments. The candidate must also be able to work full-time in our Thiruvallur office, and we require male candidates for this role. A proactive attitude towards continuous improvement will be highly valued.

WE ARE HIRING Bajaj Auto Limited Location: Waluj, MaharashtraPOSITIONDiploma Trainee Engineer / Apprentice TraineeJOB DESCRIPTIONWe Corporate is hiring Male & Female candidates for Production Operations at Waluj.Selected candidates will work in the following production areas:Vehicle AssemblyEngine AssemblyMachine ShopELIGIBILITY CRITERIAQualification: ITI / DiplomaPass-out Years: 2023, 2024 & 2025Minimum Marks: 50%Gender: Male & FemaleAge: 18-25 YearsELIGIBLE ITI TRADESFitter Turner Machinist (Grinder) Mechanic Motor Vehicle (MMV) Mechanic Diesel Engine Electrician Electronics Mechanic Welder (Gas & Electric)ELIGIBLE DIPLOMA BRANCHESMechanical Engineering Automobile Engineering Electrical Engineering Electronics Electronics & Communication Metallurgical Engineering Electronics & Telecommunication Mechatronics Production Engineering Industrial / Manufacturing EngineeringPHYSICAL CRITERIAMinimum Height:Male - 157 cm Female - 152 cmMinimum Weight:Male - 45 kg Female - 40 kgWORKING DETAILSShift: 1st / 2nd ShiftWorking Days: Monday to SaturdayDuty Hours: 8 HoursWeek Off: 1 Week OffSTIPEND DETAILS Category Monthly StipendNAPS - ITI 16,000NATS - Diploma 17,000FACILITIES & BENEFITSTransportation at subsidized ratesFood at subsidized ratesPaid PG / Room AvailableSharing Rooms approx. 1,500-2,000 per personSafety Shoes & UniformPPECanteenInsuranceOn-the-Job TrainingREQUIRED DOCUMENTSCandidates should carry:Updated CV10th Certificate12th Certificate (if applicable)ITI/Diploma All Semester Mark SheetsITI/Diploma Passing CertificateAadhaar CardPAN Card2-3 Passport Size PhotosSELECTION PROCESSInterview Medical Test DocumentationINTERESTED CANDIDATES CAN CONTACT:Apply Now: Fill out the Google Form to apply for this position.

We are looking for a skilled Maintenance Engineer to manage and improve our equipment and systems in Coimbatore, India. The ideal candidate will have between 3 to 5 years of experience and be a male graduate who is ready to work in the office.Key Responsibilities:1. Equipment Maintenance: Perform regular inspections and maintenance of machinery to ensure they operate efficiently and safely. This includes troubleshooting and repairing any faults.2. Preventive Maintenance: Develop and implement preventive maintenance schedules to minimize downtime and extend the life of equipment.3. Documentation: Maintain accurate records of maintenance activities, including repairs, inspections, and replacement parts used. This helps in tracking performance and planning future maintenance.4. Collaboration: Work closely with other engineering and production teams to ensure all maintenance activities align with production schedules and quality standards.5. Safety Compliance: Ensure all maintenance practices comply with safety regulations and company policies, fostering a safe working environment for all employees.Required Skills and Expectations:Candidates should have a solid understanding of mechanical and electrical systems. Proficiency in using diagnostic tools and software is essential. Strong problem-solving skills and attention to detail are necessary to identify issues and implement solutions quickly. Good communication skills are important for effective collaboration with colleagues and management. Candidates should be proactive and able to adapt to changing circumstances in a dynamic work environment.

As a Tool Maker, you will be responsible for creating, repairing, and maintaining precision tools and molds used in the manufacturing process. Your work will ensure the smooth operation of production machinery and contribute to high-quality output.Key Responsibilities:- Tool Fabrication: You will design and build tools according to specifications, ensuring they meet the required standards for quality and precision.- Tools Maintenance: Regularly inspect and maintain tools to ensure they are in optimal working condition. This includes sharpening and repairing worn or damaged tools.- Blueprint Interpretation: Read and understand technical drawings and schematics to accurately create tools and molds that meet specific production needs.- Machinery Operation: Operate various machines such as lathes, milling machines, and grinding machines. Familiarity with these machines is essential for effective tool making.- Quality Control: Conduct tests to check the functionality and quality of produced tools, making necessary adjustments to meet quality standards.Required Skills and Expectations:- A Diploma in Mechanical Engineering or a related field is essential for this role.- You should have 2 to 8 years of relevant work experience in tool making.- Strong attention to detail and precision is crucial for producing high-quality tools.- Good problem-solving skills are necessary for identifying and fixing issues with tools or equipment.- Basic computer skills, particularly in design software, are advantageous for tool design tasks. We expect you to be a team player with effective communication skills and a strong work ethic. Your ability to work efficiently in a fast-paced environment is also important.

We are looking for a Mechanical Production Engineer based in Ghaziabad, India, with 2-4 years of experience and a diploma in Mechanical Engineering. As a Mechanical Production Engineer, you will be responsible for overseeing the manufacturing process, ensuring quality control, managing production schedules, and troubleshooting any issues that arise on the production line.Key responsibilities include planning and organizing production schedules, assessing project and resource requirements, estimating, negotiating, and agreeing on budgets and timescales with clients and managers, ensuring that health and safety regulations are met, and determining quality control standards.The ideal candidate should have strong problem-solving skills, excellent technical knowledge, the ability to work well under pressure, good communication skills, and the ability to work in a team. We are looking for a detail-oriented individual who can demonstrate leadership skills and a strong work ethic. Experience in a manufacturing environment is preferred.

We are seeking experienced Machine Shop In-Charges to lead and optimize machining operations. The role requires strong technical expertise in CNC/VMC operations, production planning, and shop-floor management to achieve consistent productivity, quality, and cost targets. Key Roles & Responsibilities Overall responsibility for machining operations and shop-floor performance Expertise in CNC / VMC machine shop operations Execute and monitor production planning and scheduling Drive OEE-based performance improvement and efficiency enhancement Hands-on knowledge of machine programming, tooling, and operating systems Manage shift planning, manpower allocation, and supervision Conduct cost analysis and improve operational effectiveness Coordinate with Quality, Maintenance, and Production teams Ensure strict adherence to safety, quality, and process standards Required Skills & Competencies Strong technical knowledge of CNC/VMC machining processes Experience in production planning, OEE monitoring, and shop-floor control Solid understanding of machine programming and tooling systems Proven leadership and team management skills Analytical mindset for cost control and continuous improvement Candidates with experience in the same field will be preferred.

wanted Senior production engineer, Quality Engineer, Male , Age - 40 years, Experience in Machine shop components, manufacturing industry.

Senior Engineer* Team handling experience (currently he will be handling a team)* Hands on experience in Electrical machines like Press shop, assembly lines, injection Moulding* Core maintenance works -Preventive maintenance, Breakdown maintenance, Predictive Maintenance, MTBF & MTTR)* ISO Audit and documentation knowledge (PM/History card/CBM/TBM/why-why analysis)* PLC/SERVO & HMI Programming knowledge (Omron/Mitsubishi)* Good communication & presentation skills* Kaizens/Improvement* Candidate already working as a senior engineer is preferable (or) already working as an Engineer for last 4years is preferable Must have a good communication skill.

FRESHER OR EXP

Opening :Sr.Quality Engineer Location: Chinchwad Midc Experience: 5 to 8 Yrs. Machines Shop Quality Interested please Call : 8010995764.Warm RegardsMr.Dinesh Bagul.Ascent Placement Solution8010995764.

Qualification-Mechanical Fresher, Job Location -Gurgaon

Bachelor's degree in Mechanical Engineering or related field.Extensive experience in CNC & VMC machining and production management.Proficient in CNC & VMC programming and operator training.Strong knowledge of cutting tools, metrology, and production cost reduction.Excellent communication and coordination skills.Send CV : worksapex2@gmail.com

Knowledge of CNC ,VMC and HMC programming and settingknowledge of Sheet metal febricationKnowledge of Press shop and weld Shop

We are looking for 2 Machine Shop Incharge Posts in Ropar, Rupnagar with deep knowledge in Industrial Engineer and Required Educational Qualification is : Professional Degree

Quality Assurance of Machine Shop components manufactured on CNC,VMC, Turning Centres. use FMEA techniques, 7 QC tools, SPC, MSA, 8D etc.Analysis of customer complaints.Preparation of Quality plans

Post: Machine Shop EngineerGood Understanding of Processes, Manpower Management, Good Learner, Adaptable to situation, Decision Making* Vehicle is Must*

Senior Electrical Maintenance Engineer* Team handling experience (currently he will be handling a team)* Hands on experience in Electrical machines like Press shop,assembly lines,injection moulding* Core maintenacne works -Preventive maintenance, Breakdown maintenance,Predictive Maintenance,MTBF & MTTR)* ISO Audit and documentation knowledge ( PM/History card/CBM/TBM/why-why analysis)* PLC/SERVO & HMI Programming knowledge (omron/mitsubishi)* Good communication & presentation skills* Kaizens/Improvement* Candidate already working as a senior engineer is preferable (or) already working as an Engineer for last 4years is preferable Must have a good communication skills.

Greeting From Vishakan Placement Service !! Hiring VMC OperatorIndustry: Automotive -Sheet metal industry Qualification: Diploma- B,E/B.Tech Mechanical/Automobile Experience: 3-8 YearsLocation: Papparapakkam Tiruvallur Job Shift Timing: 06.00 am to 2.30 pm - 1st shift 02.00pm to 09.50 pm - 2nd shift 09.50pm to 06.00am - 3rd shift 09.00 am to 05.30 pm - General shift Sunday week-OffNo of openings : 35+ Cab Facility: Pickup from Thiruninravur Railway Station Pickup from Thiruvallur Railway Station Immediate Joiner Need Joining within 7 to 15 Days Interview Schedule: Monday - Saturday / 10 AM- 12 PM & 2 PM-4 PM Interview Timing Interview Process: Direct Walk in Interview- HR Round - Technical Round - MD Round Immediate Joiner Must Work Location: Papparambakkam Village, Mannur Road, Koppur, Tamil Nadu - 602025 Candidate Nearby Location: sriperumbudur, Thandalam, Mannur, Nemili, Manavala Nagar(tiruvallur), Thiruninravur,Sevvapettai,Veppampattu,Thirumuazhisai, Aranvoyal. If candidate interested for job feel free please call immediately Call @ Vishakan Placement Service - HR Pradeep # please refer your friends or colleague#

Dear XXXX,Hiring for-(Automotive industry.)Dept:- (Prod,Quality,Main,Design & development,NPD,Purchase etc.)Exp:- Any.Salary- As per Interview/ExperienceLocation- Chakan,PCMC PuneTo apply-Whatsapp resume/cv or contact us- 9525070746Mail- sujeetmuz6@gmail.comNote:- Pls feel free to contact us on given contact for any query/support.RegardsAutomotive IndustryDisclaimer : This email is sent by Automotive Industry (sujeetmuz6@gmail.com, ), who is registered with PlacementIndia.com. As a recipient of this email, you are responsible for checking the validity of offers/information contained in this email, and if you find the content inappropriate, you can report the same through our Complaint Feedback link. You may also BLOCK this company from your Login Folder with PlacementIndia.com.Note: This is a private communication from the recruiter. You get an auto-login facility here for the ease to apply for the job. We highly recommend you not to forward this email to anyone to keep your account protected from unauthorized access

Requirement for Production Engineer. Good Understanding of Autocad, Good Communication Skill, Ready to Work On Site*vehicle is Must*