Equipment Design Engineer Jobs

Job:- Rotating Equipment EngineerJob Location:- Delhi NCR And MaharashtraManage complete technical scope for supply of new packaged rotating equipment for onshore and offshore projects including gas turbine-generators, gas turbine-compressors, electric motor-driven compressor trains, and extended plant scope.Good understanding of Gear Box, Coupling and systemsSupport Project Manager to address technical concerns with internal and external clients. Lead global technical project teams of multi-discipline engineers, designers and suppliersManage Engineering schedule, including on time release of equipment specifications, bills of material, and customer documentationLead all technical contract requirements on assigned projects to deliver on targets and objectives, including certifications and compliance to all applicable standardsProvide engineering support during proposal, manufacturing, testing, installation, commissioning and operationSupport team with detailed design decisions to meet contract requirements, such as overall system control philosophies and main equipment specificationConduct detailed review of contract requirements and specifications and translate these to the project team.Required:-Bachelors Degree in Mechanical Engineering with experience in packaging or operation of rotating equipmentRelevant minimum experience of 10 years is expected in the field of Rotating Equipment for Oil & Gas, Petrochemical, and other Process Industry applications, achieved through combination of positions in Engineering, Project Management, Manufacturing, Proposals, and/or Procurement.Thanks & Regards,Amit Srivastava

Job Title: Senior Engineer - Cryo Equipment (Fuel Tank Design)Company: Recruited by Catapult Recruitment SolutionsLocation: Thanjavur, Tamil NaduJob Type: Full-time, PermanentExperience: 5+ years (minimum)Education: Postgraduate / Graduate Degree in Mechanical EngineeringDepartment: Design Reports to: CEOAbout the RoleCatapult Recruitment Solutions is hiring on behalf of a heavy engineering company in Thanjavur, Tamil Nadu, expanding into cryogenic equipment manufacturing. We're looking for a Senior Engineer - Cryo Equipment to lead the design, development, and testing of cryogenic fuel tanks and related systems. This is a high-visibility role reporting directly to the CEO, ideal for an engineer who wants to help build a new business line from the ground up rather than operate within an established one. The role is suited to someone with a strong grounding in cryogenic vessel design, working toward the caliber of engineering seen at specialized cryogenic equipment manufacturers such as CTR Cryo and Cryolor.Key Responsibilities Design and develop cryogenic fuel tanks and related cryogenic equipment - sizing, detailed engineering, and fabrication drawings. Perform thermal analysis, vacuum insulation design, and cryogenic fluid handling calculations to optimize tank performance and heat-leak control. Select and specify accessories including valves, piping, safety relief devices, and insulation systems. Ensure designs comply with applicable codes and standards such as ASME and PED. Liaise with statutory authorities, including PESO, for regulatory approvals of cryogenic equipment. Prepare and implement QA/QC plans, QAP, and ITP documentation for cryogenic vessel manufacturing. Support manufacturing and fabrication teams in translating designs into production, including static, mobile, and storage cryogenic vessels. Troubleshoot design and system-level issues, including field failures and complex cryogenic system problems. Develop and standardize safety protocols for cryogenic tank design, handling, and testing. Coordinate with cross-functional teams (production, procurement, quality) and support the project from design through commissioning. Identify opportunities for design optimization, cost reduction, and continuous improvement in cryogenic engineering practices.Required Skills & Qualifications Postgraduate or Graduate degree in Mechanical Engineering. Minimum 5 years of hands-on experience in cryogenic tank/vessel design (static, mobile, or storage). Working knowledge of PESO approvals and statutory compliance for pressure/cryogenic equipment. Strong understanding of cryogenic fluid handling, vacuum technology, and thermal analysis. Experience with ASME / PED codes and QA/QC documentation (QAP, ITP). Proficiency in CAD tools (SolidWorks, AutoCAD, or equivalent). Strong problem-solving skills with the ability to troubleshoot complex system failures. Good communication and stakeholder management skills.About You (Preferred Profile) Ideally brings deep specialization in cryogenic systems for industrial, fuel tank, or aerospace applications, with exposure to standardized safety protocol development and cryogenic tank design optimization for customer-specific applications. Prior experience at a specialized cryogenic equipment company (e.g., CTR Cryo, Cryolor, INOX India/INOXCVA, VRV Asia Pacific, Chart Industries, Linde) is a strong plus. Experience leading or mentoring junior engineers is an advantage, though not required at the 5-year experience level. Familiarity with FEA/simulation tools for thermal and structural analysis.

An Erection & Commissioning Engineer is an engineer responsible for:Erection (Installation)Supervising installation of industrial equipment, machinery, pipelines, electrical systems, or plant structures.Ensuring equipment is assembled according to drawings and technical specifications.Coordinating with mechanical, electrical, civil, and instrumentation teams.CommissioningTesting and starting up systems after installation.Checking performance, safety, calibration, and operational readiness.Troubleshooting issues before handing over the plant/equipment to operations.

Lead - Electrical Design (substation & T&D)Role & responsibilitiesShall be Responsible for Design and engineering of high voltage systems / switchyards / Substation / Transmission & Distribution systems in compliance with international codes & standards Technical and commercial evaluation of bids for various electrical packages. Preparation of Key SLD and Layout drawings. Selection of Controls and Protections scheme as per project requirement Sizing of Transformers, Switchgears, GCB, Bus ducts, DG set, UPS and DC system Should lead a team and guide the team.Preferred candidate profileElectrical Engineering graduate with 8 to 13 Yrs of Experience in power system electrical Design and engineering of high voltage systems / switchyards / Substation Transmission & Distribution systems in compliance with international codes & standards. Preparation of equipment / system specification, single line diagrams, schematic diagrams, power systems studies, cable, earthling and lighting layout, switchyard and substation layout. Design Calculation for sizing electrical equipment and earthling calculations etc. Preparation of specification and tender evaluation and drawing review of electrical equipment's Power plant Oil & Gas Experience Must immediate joiner shall be given first preferenceEducation: UG: B.Tech/B.E. in Electrical

The Electrical Design Engineer is responsible for designing and developing electrical systems for building and infrastructure projects. The role ensures efficient, safe, and code-compliant electricaldesigns covering power distribution, lighting, and low-voltage systems.Key Responsibilities:1. Electrical System Design (HT/LT):- Collaborate with project teams to understand client requirements and electrical load needs.- Prepare electrical load calculations and power distribution layouts including control schematics.- Design lighting systems, emergency power, grounding & earthing systems, and lightning protection etc.- Selection and sizing of equipment including Transformers, Generators, UPS, Panels, Circuit Breakers, Cables, and Switchgear etc.- Prepare detailed single-line diagrams (SLDs), wiring/control schematics, and equipment layouts.- Design of ELV systems (Fire Alarm, CCTV, Access Control, Data & Communication).- Carry out HV, LV and EIV with load calculations and system design2. Code Compliance:- Ensure compliance with IEC, NEC, IS, and local authority regulations.- Stay updated on latest electrical codes, standards, and sustainable design practices.3. Technical Support:- Provide technical input during design development and construction.- Assist in resolving site-related issues and ensure adherence to design intent.4. Documentation:- Prepare and maintain electrical design reports, drawings, and calculation sheets.- Maintain clear and accessible documentation for project teams/records.Qualifications:- Diploma or Bachelors degree in Electrical Engineering.- Minimum 5 years of experience in electrical design.- Strong knowledge of electrical design principles, power distribution, and low-voltage systems.- Proficiency in AutoCAD, Revit MEP, or similar software.- Knowledge of load analysis software (ETAP, Dialux, etc.) preferred.- Effective communication and collaboration skills. - Attention to detail and strong organizational skills.

Sr. Rotating Equipments Engineer BE Mechanical with 08 to 15 years experience in the engineering of projects in the field Oil and Gas / Refinery/Power industry Experience in selection of rotating equipment and process package units including but not limited to pumps, compressors, blowers, agitators, turbines, expanders, centrifuges, dryers, refrigeration package, cooling towers, boilers, nitrogen plant, ETP, incinerators, power plants as per National and International codes and standardsLead the team in improving overall quality while optimizing the time and cost elements.Specific calculation techniques, material requisitions, inspection & testing, vendor drawingsP&ID Comprehension, structural design & calculation, equipment cost estimationChecking of Vendor Drawings/documentsManpower planning, progress monitoring, Manhours planningCo-ordination with other disciplines and vendor/client.Contact: Ms. Madhuri Meshram 9820500760 Apply now to drive innovation in Oil & Gas projects!#CivilEngineering #StructuralEngineering #OilAndGas

Design and execute HVAC systems for commercial and residential buildings, focusing on energy efficiency and sustainability.Analyse project specifications and requirements to develop comprehensive HVAC design solutions.Conduct load calculations, equipment selection, and duct design to ensure optimal system performanceCollaborate with architects, contractors, and other engineering disciplines to ensure seamless project execution.Implement industry standards and best practices in HVAC design and installation.Conduct site surveys and inspections to ensure compliance with project specifications and regulatory requirements.Provide technical support during construction, commissioning, and maintenance phases.

>Develop piping layouts, P&ID and isometric drawings.>Expertise to handle and deliver design projects involving Plant Layout, Piping Layout, Piping Design, P&IDs, General Arrangement and Piping Isometric Drawing Preparation and ensure compliance with Australian Standards / international codes.>Collaborate with multidisciplinary teams including process, mechanical, and civil engineers.>Hands on with 3D Modelling Tools pertaining to Plant Layout, Piping Skids and Piping Layout / Design >Utilize tools like Plant 3d/Solidworks/Inventor (1 software proficiency is must).

Roles & Responsibilities: Mechanical design of static equipment like pressure vessels, heat exchangers, Tanks in accordance with process inputs, design basis, design calculation, detailed fabrication drawings, contractual technical conditions and codes and standards 2. Foundation loads from static equipment are shared with civil and structural department for incorporating in design of modules / skids 3. Mechanical design of rotary equipment like pumps, compressor in accordance with process inputs, design basis, contractual technical conditions and codes and standards4. Piping design like Selection of Piping MOC, Piping Calculation, Piping Layout, Piping Material Specification, Piping MTO & BOQ, design basis, contractual technical conditions and codes and standards 5. Interface with other departments like Civil & structural during detailed engineering and preparation the 3D model 6. Interface with project support functions such as planning, procurement etc. 7. Support to Supply Chain during procurement viz. preparation of technical specifications and requisitions for obtaining offers, vendor offer evaluation and providing recommendations, preparation of requisition for purchase, review of vendor documents and drawings 8. Assistance during fabrication stages and in inspection to ensure critical technology specific aspects are being met 9. Technical follow- up with vendors/ fabricators through proper communications 10. Guidance to module fabricator during construction of modules for issues relating to erection of static equipment 11. To meet quality and HSE objectives of the project(s) 12. Support to BD Team in preparing manhours and cost estimates for Mechanical department. 13. Explain and discussion with client on design documents 14. Visit project site and resolve the technical queries raised by execution contractors/client. 15. Support during project close- out activities like Final Data Books etc. 16. Assigned activities to be executed in accordant

- Address electrical faults, breakdowns, or inefficiencies quickly to minimizedowntime and production losses.- Coordinate with production and maintenance teams to prioritize and resolveelectrical issues effectively.- Collaborate with production and engineering teams to optimize equipmentperformance and productivity.- Conduct safety audits and inspections of electrical systems, ensuring safeworking conditions for all personnel.- Develop and maintain standard operating procedures (SOPs) for electricaloperations in the manufacturing plant.

Excellent communication and presentation skills.Ability to understand customer needs and provide solutions.Ability to understand customer needs and provide solutions.Ability to work with cross-functional teams, including engineering, operations, and customer service.Familiarity with sales software, such as CRM systems.Strong problem-solving and analytical skills.Ability to work under pressure and meet deadlines.Excellent time management and organizational skills.Strong attention to detail and ability to maintain accuracy.Ability to adapt to changing situations and priorities.

Static equipment ; Looking for oil and gas experience

Job Location: Kota, RajasthanSUMMARY OF MAIN RESPONSIBILITIESTo provide Design, Technical Document, Drawing, Data Sheet and Project Data support to Technical Team andAnyone related to the project as and when desired.The post holder will be assigned to the Technical Department however may also be required to undertake otherduties as and when required.SPECIFIC RESPONSIBILITIES1.) To Design & Check in detail including but not restricted to, Heat Load Calculation, Equipment Selection, Layout of Equipment, Electrical Load Calculations etc.2.) To Draw & Check in detail including but not restricted to, GA Drawings, Duct Layout, Electrical Layout, Panel Drawing, etc.3.) Participate fully in all team meetings, supervisions, and problem solving.4.) Work to ensure professional and co-operative working relationships within own department and with other departments across the Company5.) Provide support and cover for other team members as and when required6.) Ensure efficient use of resources in place to facilitate the work being carried out.7.) Ensure Safety of Data being provided and the same not being shared to anyone outside the company without prior written consent.8.) To visit site when required to provide support to Site team, if required, at any point of the project.

Qualification BE /B-tech (Mechanical Engineering )Experience 8- 15YearsAccountability & Responsibility l Responsible for review the strength & other design related calculations.l Experience of leading the static equipment design team of 07-10 engineers.l Hands on experience for designing the static equipment/ pressure vessel using various soft wares like Pve lite, compress etc.l Manage the team of draftsmen to prepare the GA, detailed fabrication drawings.l Drawings review and approvals from clients throughout project execution.l Project related design documents preparation & Responsible for the updating documentation of the static equipment/ pressure vessel.l Responsible for the reading client's specification, PR's preparation, design development, design review and support of fabrication of static equipment/ pressure vessel design. l Client/vendor visit as per work requirementEssential Skills4 to 15 years experience in designing of pressure vessels, process columns, heat exchangers etc., the candidates preferred from heavy equipments manufacturing industries /EPC /design engineering consultancy.l Familiar with the international design codes like ASME, EN, PD-5500, TEMA standard/codes and specifications. l Proficient in applicable software, e.g. AUTOCAD, Compress, PV-Elite, nozzle-pro etc.l Knowledge of Finite element analysis (FEA) and hands on experience on software like ansys will be added advantage. l Multi-tasking and able to manage project independently throughout design life cycle. l Communication with client, vendor, internal CFT.l Excellent teamwork spirit.

Job Overview -:-Tthis role requires to Lead the project, Preparing, scheduling, coordinating and monitoring the assigned engineering projects. Monitoring compliance to applicable codes, practices, QA/QC policies, performance standards and specifications. Interacting daily with the clients to interpret their needs and requirements and representing them in the field.Responsibilities -:-Preparing, scheduling, coordinating, and monitoring of assigned engineering projects.Reviewing the engineering tasks and initiating the necessary corrective actions.To ensure that the full compliance of sub-contractors with Company Quality policies and with the requirements of this method statement.To ensure that all the equipment required executing the works according to the BMS project are available, in good condition, and provide any additional equipment that might be required.To co-ordinate with the Electrical, QA, QC & EHS for a safe and proper execution of the works.Liaise with Client / Consultant for execution of works as per BMS project activities Collect and analyse project information to create status reports and recommend future actionsAllocation of required labour through co-ordination with the Project Manager.Take precautionary measures concerning protecting works from hot weather, wind, rain and sun. Ensure that all works activities will be carried out in accordance to approved drawings, specifications and quality.

Please find the given job description.Post Design EngineerJob Location - Bhiwandi (Mankoli)Education - Mechanical diploma / Degree Payment scale - 20 to 35 k / month ctc to company Experience - 3 to 5 years Required Skills -Static & rotary equipment design and estimation knowledge required Reactors, pressure vessels, static dryers, screw conveyor, rotary dryer etc. Kirti GaikwadHR EXECUTIVE

Please find below our requirement for the design engineers in continuous casting machine design.Minimum qualification BE/ B-TECH Mechanical engineeringShould have minimum experience 1- 4 years in equipment design.Preferably from Continuous casting machine or steel industry or heavy machinery industry.Should have software proficiency of Auto CAD and Inventor.