Electrical Maintenance Jobs

ONLY INDIAN CANDIDATES ONLY Diagnose vehicle electrical and electronic faults.Repair and replace damaged wiring, cables, connectors, fuses and switches.Check and repair batteries, starters and alternators.Troubleshoot lighting, ignition and charging systems.Use computer diagnostic/scanning equipment to identify vehicle faults.Repair electrical and electronic control systems.Install vehicle accessories such as lights, horns, alarms, audio systems and other electrical accessories.Read and understand vehicle wiring diagrams.Carry out regular electrical maintenance and inspections.Test vehicles after repairs to ensure proper and safe operation.Maintain workshop tools and equipment properly.Follow company safety procedures and maintain a clean working area.

K9HR SOlUTIONS, Nidhi Jethva(HR Manager - Mo. No. 93134 66308 Email ID : hr02@k9hr.com) is looking for Electrical Maintenance Engineer as follows:An Electrical Maintenance Engineer in a foundry plant keeps heavy machinery running safely and smoothly. They fix electrical breakdowns, run routine checkups, and manage power systems for induction furnaces, molding lines, and sand plants. They need a degree or diploma in electrical engineering and 2 to 5 years of heavy industry experience.

Freshers can applyQualification:- ITI/Diploma/B.E./B.Tech - Electrical/Electronics/ElectricianIndustry :- MNC CompanyRoles and Responsibilities:- 1. Operates CAAQMS equipment to generate valid data through CAAQMS.2. Uses software, tools, and other devices to control and change equipment settings.3. Monitors plants and dams and coordinates stream flow to meet power demands.4. Maintain the stations Daily log book, maintenance log book including noting down the cylinder pressures regularly.5. Perform monthly calibration of analyzers.6. Performa daily, weekly and monthly maintenance of the analyzer as per Maintenance schedule.

Job for Electrical diploma holder candidateCandidate job profile :-As a Service Engineer with a specialization in Electrical Engineering, you responsible for maintaining and improving electrical systems. Your role will involve troubleshooting issues, performing regular maintenance, and ensuring systems operate efficiently and safely. This position requires on-site support, technical expertise, and strong problem-solving skills.ResponsibilitiesTroubleshoot and resolve electrical system issues.Perform regular maintenance and inspections of electrical systems.Ensure compliance with safety and regulatory standards.Collaborate with other engineers and technicians to improve efficiency.Document service and maintenance activities accurately.Provide on-site technical support as needed.Manage and prioritize a schedule of multiple service tasks.

A foundry fitter maintains, repairs, and assembles heavy machinery and equipment used in metal-casting and processing plants. They ensure that furnaces, molding lines, conveyors, and cranes operate safely and correctly.A foundry electrician maintains, troubleshoots, and repairs heavy electrical systems, control panels, motors, and melting furnaces in a metalcasting plant. They perform preventive and breakdown maintenance to keep production lines, compressors, and automated machinery running safely and smoothlyFurnace and Machine Upkeep: Inspect and service high-power induction or electric arc furnaces, cooling systems, and air compressors.

We are seeking an experienced Electrical Maintenance Engineer to join our team in Bharuch. The candidate will be responsible for ensuring the smooth operation of electrical systems and equipment in our facility.**Key Responsibilities:**- **Maintenance of Electrical Systems:** Perform regular maintenance on electrical systems to prevent breakdowns and ensure optimal performance.- **Troubleshooting Issues:** Identify and resolve electrical faults quickly to minimize downtime and improve operational efficiency.- **Installation of Equipment:** Oversee the installation of new electrical equipment, ensuring it meets safety and quality standards.- **Conduct Inspections:** Regularly inspect electrical installations and machinery to ensure compliance with safety regulations and identify potential hazards.- **Documentation:** Maintain accurate records of maintenance activities, inspections, and repairs to facilitate future reference and compliance.- **Collaboration with Teams:** Work closely with other engineering and maintenance teams to coordinate tasks and improve overall maintenance strategies.**Required Skills and Expectations:**The ideal candidate should have a Bachelors degree in Electrical Engineering and 5 to 11 years of relevant experience in electrical maintenance. Strong troubleshooting and problem-solving skills are essential. The candidate must possess a thorough understanding of electrical systems, safety regulations, and maintenance best practices. Additionally, good communication skills are vital for effective collaboration with team members and other departments. The candidate should also be able to work independently and adapt to various situations, maintaining a proactive approach to maintenance challenges.

We are seeking a motivated Electrical Site Engineer with 1 to 2 year of experience to join our team in Chotila, Surendranagar. The ideal candidate will have an I.T.I. qualification and a passion for electrical engineering.As an Electrical Site Engineer, you will be responsible for assisting in the planning, execution, and supervision of electrical projects. You will work closely with senior engineers and project managers to ensure all work is completed to specifications and within deadlines.Key Responsibilities:- **Site Supervision**: Oversee solar plant, ensuring compliance with safety regulations and quality standards.- **Project Planning**: Assist in scheduling tasks and allocating resources to maintain project timelines.- **Troubleshooting**: Identify and resolve electrical or non technical issues on-site promptly to minimize project delays.- **Collaboration**: Work with other team and Laboure to ensure smooth Operation and Maintenance.- **Documentation**: Maintain accurate records of work performed and report progress to senior management.Required Skills and Expectations:The ideal candidate should have a fundamental understanding of electrical systems and Operation and maintenance. Strong problem-solving skills and attention to detail are essential. Good communication skills are necessary to interact effectively with team members and contractors. A willingness to learn and adapt to new challenges is important for professional growth within the role.

We are looking for a smart, hands-on and systems-driven Plant Head to independentlymanage the day-to-day operations of our steel fabrication, hot-dip galvanization andelectrical switchgear manufacturing facility.Lead and manage the complete factory operations, including:o Steel fabricationo Hot-dip galvanizationo Electrical switchgear and panel manufacturingo Maintenanceo Packing, dispatch and logistics Convert the production plan into daily, shift-wise and supervisor-wise executiontargets. Supervise production teams, allocate manpower and machinery, monitor dailyoutput and remove production bottlenecks. Ensure fabrication and galvanization are carried out as per approved drawings,specifications, job cards and quality standards. Control critical galvanization parameters, including surface preparation, pickling,fluxing, zinc bath operation, coating quality, zinc consumption, re-dipping anddistortion. Monitor steel, zinc, chemicals, fuel, electricity, welding consumables and othermajor production costs. Minimize material wastage, rejection, rework, excess consumption, machinedowntime and idle manpower. Ensure preventive maintenance and timely resolution of machine and utilitybreakdowns. Coordinate closely with PPC, Stores, Quality Control, Purchase, Finance and HRwhile respecting their independent control responsibilities. Ensure material is issued only against authorized documents and that scrap,unused material and finished goods are properly recorded and traceable. Ensure no material is dispatched without Quality Control clearance, correctpacking and authorized documentation. Maintain shop-floor discipline, safety, housekeeping, worker productivity andcompliance with factory procedures. Submit accurate daily reports covering production, rejection, rework, downtime,material shortages, manpower, dispatch and critical constraints. Develop competent supervisors and systems so that the factory operates withoutcontinuous involvement of the CEO.

Job Role:Operate, maintain & repair electrical systems (generators, transformers, switchgear, controls).Perform inspections, troubleshooting & preventive maintenance.Assist in installation, calibration & repair of electrical equipment.Ensure compliance with safety codes & company standards.Collaborate with supervisors & team for smooth plant operations.Benefits: Attractive Salary + Food, Accommodation & Transportation (Company Provided)

We are seeking a Substation Engineer with 3 to 9 years of experience to join our team in Delhi NCR. The ideal candidate will have a B.Arch or B.E. degree and will be responsible for designing, developing, and maintaining substation systems.**Key Responsibilities:**- **Design Substation Layouts:** Create efficient designs for power substations, ensuring compliance with industry standards and safety regulations.- **Conduct Site Assessments:** Visit project sites to evaluate conditions, ensuring the suitability for substation installations and modifications.- **Perform Technical Evaluations:** Analyze technical specifications and select appropriate equipment, such as transformers, circuit breakers, and protection systems.- **Coordinate with Teams:** Collaborate with architects, civil engineers, and other specialists to integrate substation designs into larger project frameworks.- **Manage Project Timelines:** Oversee project schedules, ensuring timely completion and adherence to budget constraints while effectively communicating progress to stakeholders.- **Ensure Regulatory Compliance:** Stay updated on relevant regulations and ensure all designs and installations meet legal and safety standards.**Required Skills and Expectations:**Candidates should possess strong technical knowledge of electrical systems and substation operations. Proficiency in software tools for design and simulation is essential. Communication skills are important for effective team collaboration and presenting ideas clearly. Attention to detail and strong analytical abilities are necessary for evaluating systems and solving complex problems. Candidates should be able to manage multiple tasks and work under pressure to meet deadlines while maintaining quality standards.

We are looking for an Aircraft Engineer to join our team in Mumbai. In this role, you will be responsible for ensuring the safety and efficiency of our aircraft operations. You will have the opportunity to work with experienced professionals and learn about aircraft systems and maintenance.**Key Responsibilities:**- **Conduct Inspections**: You will perform regular checks on aircraft to ensure they meet safety standards and are in good working condition.- **Maintenance and Repairs**: You will be responsible for diagnosing issues and carrying out repairs, ensuring that all work is completed according to regulations.- **Documentation**: Keeping accurate records of maintenance work and inspections is essential for compliance and safety checks.- **Collaboration**: You will work closely with other engineers and technicians to coordinate maintenance schedules and share knowledge.- **Compliance with Standards**: You will ensure all operations comply with aviation safety regulations and industry standards.**Required Skills and Expectations:**- A background in engineering is preferred, but a 12th-grade education is acceptable. - Strong problem-solving skills are essential for diagnosing aircraft issues effectively.- Attention to detail is crucial as aircraft maintenance requires precision and accuracy.- Basic knowledge of aircraft systems or willingness to learn is expected.- Strong communication skills are important for collaborating with team members and documenting inspections and repairs.- A proactive attitude towards safety and a desire to grow in the aviation field will be highly valued.

K9HR SOLUTIONS, Jahanvee Patel, HR Manager (+91 93134 24062 hr01@k9hr.com) is looking for skilled SCADA Engineer with 3 to 9 years of experience to manage and optimize our SCADA systems in Rajkot, India. The ideal candidate will have a diploma and a strong understanding of automated control systems.Key Responsibilities:1. **System Development and Maintenance**: Design, build, and maintain SCADA systems, ensuring they operate smoothly and efficiently.2. **Troubleshooting and Support**: Diagnose and resolve issues within SCADA applications and hardware, providing timely support to minimize downtime.3. **Data Monitoring and Analysis**: Monitor real-time data from industrial processes, analyze trends, and generate reports to improve performance and reliability.4. **Collaboration**: Work closely with other engineers and departments to integrate SCADA systems with existing technologies and ensure alignment with operational goals.5. **Documentation**: Create and maintain comprehensive documentation of system configurations, changes, and procedures for future reference.Required Skills and Expectations:Candidates should possess strong problem-solving skills and a solid understanding of SCADA architecture and components. Proficiency with various programming languages and familiarity with database management systems is essential. The role requires effective communication skills to work collaboratively within a team and the ability to present technical information clearly. Attention to detail, a proactive attitude towards challenges, and a commitment to continuous learning in the industry are also critical for success in this position.

We are seeking a skilled AC Technician with 2 to 8 years of experience to join our team in Jidhafs. The technician will be responsible for installing, repairing, and maintaining air conditioning systems, ensuring optimal performance for our clients.Key Responsibilities:1. **Installation**: Set up new air conditioning units and ensure all components are correctly fitted and functioning.2. **Maintenance**: Perform regular maintenance checks on existing systems to enhance efficiency and prolong lifespan.3. **Diagnosis**: Identify issues in malfunctioning AC units and troubleshoot problems effectively using diagnostic tools.4. **Repair**: Repair or replace damaged parts to restore units to operational status promptly.5. **Customer Service**: Communicate with clients about their AC systems, offering guidance and answering questions regarding maintenance and usage.Required Skills and Expectations:The ideal candidate will have a strong understanding of air conditioning systems and components. Candidates must be able to work independently and demonstrate excellent problem-solving abilities. Strong communication skills are essential for interacting with clients and explaining technical problems in simple terms. Candidates should be physically fit, as the job may require lifting heavy equipment and working in various environments. A high school diploma (12th pass) is required, and a valid certification or training in AC technology is preferred. Candidates must be male and available for a full-time role working from the office.

We are looking for a skilled Petrol Mechanic to join our team in Jidhafs. The ideal candidate should have 2 to 8 years of experience and a diploma in a relevant field. This full-time position is office-based and is open to male applicants only.As a Petrol Mechanic, your main responsibilities will include diagnosing and repairing petrol engines, conducting routine maintenance checks, and ensuring the vehicles are safe and running efficiently. You will be responsible for inspecting various components like fuel systems, exhaust systems, and electrical systems to identify issues. You will also need to record and report maintenance activities, ensuring that all repairs are documented accurately.To succeed in this role, you should have a solid understanding of engine mechanics and be familiar with the tools and equipment used in the repair process. You should be able to troubleshoot problems effectively and work independently with minimal supervision. Attention to detail is crucial, as is the ability to follow safety guidelines strictly. A strong customer service attitude is necessary, as you may need to explain repairs and maintenance options to clients clearly and professionally. If you have a passion for vehicles and possess the required skills and experience, we encourage you to apply for this opportunity and become a valuable part of our team.

We are seeking a skilled AC Technician with 2 to 8 years of experience to join our team in Jidhafs. The technician will be responsible for installing, repairing, and maintaining air conditioning systems, ensuring optimal performance for our clients.Key Responsibilities:1. **Installation**: Set up new air conditioning units and ensure all components are correctly fitted and functioning.2. **Maintenance**: Perform regular maintenance checks on existing systems to enhance efficiency and prolong lifespan.3. **Diagnosis**: Identify issues in malfunctioning AC units and troubleshoot problems effectively using diagnostic tools.4. **Repair**: Repair or replace damaged parts to restore units to operational status promptly.5. **Customer Service**: Communicate with clients about their AC systems, offering guidance and answering questions regarding maintenance and usage.Required Skills and Expectations:The ideal candidate will have a strong understanding of air conditioning systems and components. Candidates must be able to work independently and demonstrate excellent problem-solving abilities. Strong communication skills are essential for interacting with clients and explaining technical problems in simple terms. Candidates should be physically fit, as the job may require lifting heavy equipment and working in various environments. A high school diploma (12th pass) is required, and a valid certification or training in AC technology is preferred. Candidates must be male and available for a full-time role working from the office.

Freshers can applyQualification:- ITI/Diploma/B.E./B.Tech - Electrical/Electronics/ElectricianIndustry :- MNC CompanyRoles and Responsibilities:- 1. Operates CAAQMS equipment to generate valid data through CAAQMS.2. Uses software, tools, and other devices to control and change equipment settings.3. Monitors plants and dams and coordinates stream flow to meet power demands.4. Maintain the stations Daily log book, maintenance log book including noting down the cylinder pressures regularly.5. Perform monthly calibration of analyzers.6. Performa daily, weekly and monthly maintenance of the analyzer as per Maintenance schedule.Interested Candidates can aaply on 7096777705

As a Substation Engineer in Panjim Goa, India, you will be responsible for designing, operating, and maintaining electrical substations. This role requires 3 to 9 years of experience and a graduate degree in a relevant field and Bhadanis Institute Substation Training Certificate or Nicmar or Rics preferable.Key responsibilities include:1. **Design and Planning**: Create detailed plans for new substations, ensuring they meet all safety and operational standards.2. **System Analysis**: Evaluate existing substation systems, conduct load flow studies, and identify areas for improvement or upgrades.3. **Equipment Installation**: Oversee the installation, testing, and commissioning of substation equipment, ensuring everything functions correctly and efficiently.4. **Maintenance Coordination**: Schedule and conduct regular maintenance checks, troubleshooting equipment issues to minimize downtime and ensure reliable service.5. **Project Management**: Manage projects from conception to execution, coordinating with contractors and ensuring deadlines and budgets are met.6. **Compliance Management**: Ensure all operations comply with regulatory standards and best practices, keeping up with changes in industry regulations.7. Bhadanis Trained Engineers or Rics or Nicmar PreferableRequired skills and expectations include strong analytical abilities to assess system performance and resolve issues effectively. You should possess excellent communication skills for collaboration with team members and clients. A proactive approach to problem-solving and a commitment to safety are essential. Familiarity with industry software and tools is also expected, along with the ability to work independently while contributing positively to a team environment.

As a Substation Engineer in Ahmedabad Gujarat, India, you will be responsible for designing, operating, and maintaining electrical substations. This role requires 3 to 9 years of experience and a graduate degree in a relevant field and Bhadanis Institute Substation Training Certificate or Nicmar or Rics preferable.Key responsibilities include:1. **Design and Planning**: Create detailed plans for new substations, ensuring they meet all safety and operational standards.2. **System Analysis**: Evaluate existing substation systems, conduct load flow studies, and identify areas for improvement or upgrades.3. **Equipment Installation**: Oversee the installation, testing, and commissioning of substation equipment, ensuring everything functions correctly and efficiently.4. **Maintenance Coordination**: Schedule and conduct regular maintenance checks, troubleshooting equipment issues to minimize downtime and ensure reliable service.5. **Project Management**: Manage projects from conception to execution, coordinating with contractors and ensuring deadlines and budgets are met.6. **Compliance Management**: Ensure all operations comply with regulatory standards and best practices, keeping up with changes in industry regulations.7. Bhadanis Trained Engineers or Rics or Nicmar PreferableRequired skills and expectations include strong analytical abilities to assess system performance and resolve issues effectively. You should possess excellent communication skills for collaboration with team members and clients. A proactive approach to problem-solving and a commitment to safety are essential. Familiarity with industry software and tools is also expected, along with the ability to work independently while contributing positively to a team environment.

As a Substation Engineer in Kolkata West Bengal, India, you will be responsible for designing, operating, and maintaining electrical substations. This role requires 3 to 9 years of experience and a graduate degree in a relevant field and Bhadanis Institute Substation Training Certificate or Nicmar or Rics preferable.Key responsibilities include:1. **Design and Planning**: Create detailed plans for new substations, ensuring they meet all safety and operational standards.2. **System Analysis**: Evaluate existing substation systems, conduct load flow studies, and identify areas for improvement or upgrades.3. **Equipment Installation**: Oversee the installation, testing, and commissioning of substation equipment, ensuring everything functions correctly and efficiently.4. **Maintenance Coordination**: Schedule and conduct regular maintenance checks, troubleshooting equipment issues to minimize downtime and ensure reliable service.5. **Project Management**: Manage projects from conception to execution, coordinating with contractors and ensuring deadlines and budgets are met.6. **Compliance Management**: Ensure all operations comply with regulatory standards and best practices, keeping up with changes in industry regulations.7. Bhadanis Trained Engineers or Rics or Nicmar PreferableRequired skills and expectations include strong analytical abilities to assess system performance and resolve issues effectively. You should possess excellent communication skills for collaboration with team members and clients. A proactive approach to problem-solving and a commitment to safety are essential. Familiarity with industry software and tools is also expected, along with the ability to work independently while contributing positively to a team environment.

We are looking for an experienced Electrical Maintenance Engineer to join our team in Jaipur. The ideal candidate will have between 4 to 10 years of relevant experience and should be comfortable working in an office environment.**Key Responsibilities:**- **Electrical Equipment Maintenance:** Perform regular inspections and maintenance on electrical systems to ensure they operate efficiently and safely, minimizing downtime.- **Troubleshooting:** Identify and resolve electrical issues quickly to prevent disruptions in operations, employing analytical skills and hands-on experience.- **Installation of Electrical Systems:** Assist in the installation of new electrical equipment and systems by following specifications and guidelines to ensure compliance and functionality.- **Documentation and Reporting:** Maintain accurate records of all maintenance work and repairs conducted, ensuring that reports are clear and compliant with company standards.- **Collaboration:** Work closely with other engineers and staff members to ensure effective communication and teamwork, which are essential for smooth operations.**Required Skills and Expectations:**Candidates must have a solid understanding of electrical systems and safety protocols. Strong problem-solving skills and attention to detail are crucial. Familiarity with electrical design software and tools is an advantage. Recent experience in a similar role is necessary, along with the ability to work both independently and as part of a team. Strong communication skills are also expected to interact effectively with colleagues and management.

Plant Electrical Maintenance and Automation/troubleshooting Expertise in Motors, Operation and Maintenance of Lt Switchgear/preventive and Breakdown Maintenance of Mcc Panels, Pcc Panels./electrical Troubleshooting of Crane Control Panels,Required Candidate Profilediploma or Degree in Electrical Engineering + 3 to 6 Years in Electrical Maintenance in An Engineering Industry.(ability to Handle Shift Responsibilities Independently)basic Knowledge of Plc.

Preventive & Breakdown Maintenance: / Automation Troubleshooting:- roubleshooting electrical circuits, reading schematics, and managing PLC communication protocols (PG-PC) are highly value/ Power Optimization

We are looking for a smart, hands-on and systems-driven Plant Head to independentlymanage the day-to-day operations of our steel fabrication, hot-dip galvanization andelectrical switchgear manufacturing facility.The Plant Head will be responsible for achieving production targets, improvingproductivity, controlling wastage, maintaining discipline, ensuring machine availabilityand delivering quality products on schedule.Key Responsibilities Lead and manage the complete factory operations, including:o Steel fabricationo Hot-dip galvanizationo Electrical switchgear and panel manufacturingo Maintenanceo Packing, dispatch and logistics Convert the production plan into daily, shift-wise and supervisor-wise executiontargets. Supervise production teams, allocate manpower and machinery, monitor dailyoutput and remove production bottlenecks. Ensure fabrication and galvanization are carried out as per approved drawings,specifications, job cards and quality standards. Control critical galvanization parameters, including surface preparation, pickling,fluxing, zinc bath operation, coating quality, zinc consumption, re-dipping anddistortion. Monitor steel, zinc, chemicals, fuel, electricity, welding consumables and othermajor production costs. Minimize material wastage, rejection, rework, excess consumption, machinedowntime and idle manpower. Ensure preventive maintenance and timely resolution of machine and utilitybreakdowns. Coordinate closely with PPC, Stores, Quality Control, Purchase, Finance and HRwhile respecting their independent control responsibilities. Ensure material is issued only against authorized documents and that scrap,unused material and finished goods are properly recorded and traceable. Ensure no material is dispatched without Quality Control clearance, correctpacking and authorized documentation. Maintain shop-floor discipline, safety, housekeeping, worker productivity andcompliance with factory procedures. Submit accurate daily reports covering production, rejection, rework, downtime,material shortages, manpower, dispatch and critical constraints. Develop competent supervisors and systems so that the factory operates withoutcontinuous involvement of the CEO.Key Performance Indicators Production plan achievement On-time order completion and dispatch Steel and zinc consumption against standards Rejection and rework percentage Machine downtime Labour productivity Scrap and material wastage Preventive maintenance compliance Safety and shop-floor discipline Accuracy of production and consumption reporting

Main ResponsibilitiesElectrical Wiring and Cable LayingInstallation of Switches, Sockets, Db Panels, and Lighting SystemsReading Electrical Drawings and SchematicsTroubleshooting Electrical FaultsMaintenance of Motors, Transformers, and Electrical EquipmentTesting Electrical Circuits Using Multimeters and other ToolsEnsuring Compliance with Electrical Safety StandardsPreventive and Corrective Maintenance

Job Title: A Class Electrician / B Class Electrician / C Class ElectricianJob Description:Perform electrical installation, maintenance, and repair work at construction sites.Read and follow electrical drawings and safety procedures.Experience in the construction field is required.Knowledge of plumbing work will be considered an added advantage.Candidates must be hardworking, reliable, and able to work as part of a team.

- Install, maintain, and repair electrical systems and equipment: As an industrial electrician, you will be responsible for installing, troubleshooting, and repairing electrical systems in industrial settings such as factories, warehouses, and production facilities.- Perform preventative maintenance: You will need to conduct routine inspections of electrical systems to identify and address potential issues before they lead to equipment failure or downtime.- Read and interpret blueprints and technical diagrams: You will be required to read and understand architectural, electrical, and mechanical drawings in order to effectively plan and execute electrical installations and repairs.- Troubleshoot electrical problems: You must be able to quickly diagnose and troubleshoot electrical issues using testing equipment and hand tools to ensure minimal disruption to production processes.- Adhere to safety guidelines: Safety is paramount in industrial settings, so you must strictly adhere to all safety protocols and regulations to prevent accidents and injuries.Required Skills and Expectations:- Post Graduate Diploma in Electrical Engineering or a related field is required to demonstrate a strong foundation in electrical theory and practical application.- 1-7 years of experience working as an electrician, preferably in an industrial or manufacturing environment, to showcase familiarity with industrial electrical systems and equipment.- Proficiency in reading and interpreting electrical drawings and blueprints to effectively plan and execute electrical projects.- Strong troubleshooting skills and the ability to quickly diagnose and resolve electrical problems to minimize downtime.- Excellent attention to detail and a commitment to safety to ensure the well-being of yourself and your colleagues in the workplace.- Knowledge of electrical codes and regulations to ensure compliance with industry standards and best practices.

As an Aircraft Engineer, you will be responsible for ensuring the safety and efficiency of aircraft. Your role will involve a range of technical tasks and teamwork to maintain high standards in aviation.**Key Responsibilities:**- **Conduct Inspections:** Regularly examine aircraft to identify any mechanical issues, ensuring they meet safety regulations.- **Perform Repairs and Maintenance:** Carry out necessary repairs and routine maintenance on various aircraft systems, addressing any faults to ensure operational readiness.- **Diagnose Technical Issues:** Utilize tools and technical knowledge to troubleshoot and solve problems that arise during aircraft operation.- **Collaborate with Team Members:** Work closely with other engineers and technicians to enhance aircraft performance and safety measures.- **Document Findings:** Maintain accurate records of inspections, repairs, and parts used to ensure compliance with aviation standards.**Required Skills and Expectations:**Candidates should have a basic understanding of aircraft systems and engineering principles, ideally acquired through vocational training or relevant certifications. You should be detail-oriented, with strong problem-solving skills to address technical challenges effectively. Good communication and teamwork abilities are essential, as you will often collaborate with other professionals. A commitment to safety and adherence to strict aviation regulations is critical in this role. The job may require a willingness to work different hours, depending on operational needs. Being proactive in learning and adapting to new technologies will also be highly valued.

We are seeking an Aircraft Engineer to ensure aircraft safety and efficiency. This is a full-time position based in Kolkata, ideal for both fresh graduates and individuals with up to six years of experience.**Key Responsibilities:**- **Perform Inspections:** Regularly inspect aircraft components and systems to ensure they meet safety and quality standards.- **Conduct Maintenance:** Carry out preventive and corrective maintenance on aircraft to maintain optimal performance and reliability.- **Troubleshoot Issues:** Identify and diagnose mechanical and electrical problems using specialized equipment and tools to ensure quick resolutions.- **Document Work:** Maintain accurate records of repairs, maintenance, and inspections performed on aircraft for regulatory compliance.- **Collaborate with Teams:** Work alongside pilots, technicians, and other engineers to ensure that all aircraft systems operate safely and effectively.**Required Skills and Expectations:**Candidates should have a strong attention to detail and a commitment to safety, as precision is critical in the aviation industry. A basic understanding of aircraft systems and mechanics is essential. Candidates must possess good problem-solving skills and the ability to work under pressure, as the role can involve urgent repairs. Strong communication skills are necessary to collaborate effectively with team members and report any issues clearly. A minimum educational qualification of a 12th-grade pass is required, and any additional certifications in aviation or mechanical engineering would be advantageous.

As an Aircraft Engineer, you will play a vital role in ensuring the safety and performance of aircraft. Your primary responsibilities will include:- **Aircraft Maintenance**: Conduct regular inspections and maintenance checks on aircraft to ensure they are safe and fully operational, following industry standards and regulations.- **Troubleshooting and Repair**: Identify and fix technical issues and malfunctions in aircraft systems, ensuring timely repairs to avoid delays in operations.- **Documentation**: Maintain accurate records of inspections, repairs, and maintenance activities, which are crucial for compliance and safety audits.- **Collaboration**: Work closely with other engineers and maintenance staff to share knowledge and improve processes, enhancing overall efficiency in the workplace.- **Continuous Learning**: Stay updated with industry developments and new technologies related to aircraft systems, ensuring that your skills and knowledge remain relevant.To succeed in this role, you should have:- A background in aviation or engineering, ideally with relevant coursework or training.- Strong problem-solving skills and the ability to think critically under pressure.- Good attention to detail to ensure precision in maintenance and repairs.- Effective communication skills to relay technical information clearly to team members.- A commitment to safety, quality, and adherence to regulatory standards.This role is suitable for individuals with 0 to 6 years of experience who have completed at least their 12th grade education. You will be required to work from the office in Bangalore, collaborating with your team daily.

As an Electrical Engineer, you will play a key role in designing, developing, and maintaining electrical systems and components. This position is suitable for candidates with a diploma in electrical engineering and 0 to 1 year of experience. The role requires full-time presence in the office located on Kalawad Road.**Key Responsibilities:**- **Design Electrical Systems:** You will create electrical designs for various projects, ensuring they meet technical specifications and safety standards.- **System Maintenance:** Responsible for maintaining and troubleshooting electrical systems, addressing any issues that arise to ensure smooth operations.- **Project Coordination:** Collaborate with other engineers and teams on project developments, coordinating efforts to achieve project milestones effectively.- **Documentation:** Prepare and maintain technical documentation, including reports and specifications, for all projects and modifications.- **Quality Assurance:** Conduct tests and inspections on electrical components and systems to verify their functionality and compliance with standards.**Required Skills and Expectations:**Candidates must possess a diploma in electrical engineering and should have a keen interest in electrical systems. You should be detail-oriented, able to work under minimal supervision, and have a basic understanding of electrical design software. Good communication skills are essential for collaborating with team members and presenting ideas. A strong commitment to safety and quality standards in engineering practices is also expected. A willingness to learn and adapt in a fast-paced environment is crucial for success in this role.

Electrical Engineer , candidates have 6-7 years of experience in the Chemical, AgrochemicalIf you are interested please share ur CV

Candidate job profile:-Installation: Install GPS tracking devices in vehicles, Ensure the devices are configured correctly and integrated with the tracking platform.Maintenance: Perform maintenance on GPS systems and devices, including replacing parts and troubleshooting.Field surveys: Use GPS equipment to collect measurements and update the devices as per instructions.Technical advice: self motivated for the maintenance and troubleshooting activitySafety: Ensure all work is performed in accordance with safety guidelines.Documentation: Document all work performed, including maintenance tasks, spare and inventory parts.Training: Engs/ employees on GPS training will be provide from central team.

Job for BE, BTech and Electrical diploma holder candidateCandidate job profile :-As a Service Engineer with a specialization in Electrical Engineering, you responsible for maintaining and improving electrical systems. Your role will involve troubleshooting issues, performing regular maintenance, and ensuring systems operate efficiently and safely. This position requires on-site support, technical expertise, and strong problem-solving skills.ResponsibilitiesTroubleshoot and resolve electrical system issues.Perform regular maintenance and inspections of electrical systems.Ensure compliance with safety and regulatory standards.Collaborate with other engineers and technicians to improve efficiency.Document service and maintenance activities accurately.Provide on-site technical support as needed.Manage and prioritize a schedule of multiple service tasks.

Job for Electrical diploma holder candidateCandidate job profile :-As a Service Engineer with a specialization in Electrical Engineering, you responsible for maintaining and improving electrical systems. Your role will involve troubleshooting issues, performing regular maintenance, and ensuring systems operate efficiently and safely. This position requires on-site support, technical expertise, and strong problem-solving skills.ResponsibilitiesTroubleshoot and resolve electrical system issues.Perform regular maintenance and inspections of electrical systems.Ensure compliance with safety and regulatory standards.Collaborate with other engineers and technicians to improve efficiency.Document service and maintenance activities accurately.Provide on-site technical support as needed.Manage and prioritize a schedule of multiple service tasks.

Key ResponsibilitiesPanel & Control Wiring: Execute neat and precise internal wiring of electrical control panels (including LT/HT panels, APFC panels, and motor starters) using appropriate lugs, ferrules, and cable ties.Circuit Execution: Read and implement wiring paths directly from electrical drawings, single-line diagrams (SLD), and terminal allocation sheets.Cable Laying & Conduit Installation: Install industrial conduits, casing, and cable trays on the factory floor or at project sites; route power and control cables securely.Switchgear Mounting: Fix and connect electrical components such as MCBs, MCCBs, contactors, relays, timers, energy meters, and terminal blocks onto DIN rails.Continuity & Testing: Perform preliminary electrical checks using multimeters or continuity testers to verify connections, trace circuits, and eliminate short circuits before power-up.Electrical Maintenance: Assist senior maintenance engineers in troubleshooting faulty wiring, replacing burnt-out components, and carrying out scheduled preventive checks on plant machinery.Safety Adherence: Strictly follow industrial safety norms, including Lockout-Tagout (LOTO) protocols, and ensure continuous usage of insulated tools and Personal Protective Equipment (PPE).

Key ResponsibilitiesPreventative Maintenance: Perform routine checks and servicing on electrical distribution boards, transformers, motors, generators, and industrial machinery to prevent unexpected breakdowns.Troubleshooting & Repairs: Diagnose malfunctioning electrical systems, apparatus, and components using testing equipment (like multimeters and insulation testers) to locate and fix the root cause of the problem.Panel Wiring & Layout: Read and interpret electrical single-line diagrams (SLDs), blueprints, and schematics to wire up control panels, circuit breakers, and switches accurately.Component Replacement: Replace faulty electrical components including relays, contactors, sensors, fuses, switches, and timers on the shop floor or facility premises.New Installations: Lay out electrical wiring, conduits, and cable trays for new machinery installations or office/factory expansions according to standard safety regulations.Breakdown Logging: Maintain a clear record of daily electrical breakdowns, spare parts consumed, and preventive maintenance actions taken in the logbook.Safety Adherence: Strictly follow Lockout-Tagout (LOTO) procedures and wear appropriate Personal Protective Equipment (PPE) during all high-voltage and low-voltage electrical interventions.

We are looking for an experienced Electrician to join our team in Nashik. The ideal candidate will have a diploma in electrical engineering and 2 to 5 years of practical experience. This full-time position requires working from our office and offers the opportunity to work on various electrical projects.**Key Responsibilities:**- **Install Electrical Systems:** You will be responsible for installing electrical wiring and equipment according to plans and safety regulations. This includes lighting, motors, and circuit breakers.- **Maintain Electrical Equipment:** Regular maintenance of existing electrical systems is crucial. You will troubleshoot issues and ensure all equipment operates efficiently.- **Read Blueprints:** Understand and interpret blueprints and technical diagrams to effectively plan and execute electrical installations and repairs.- **Conduct Safety Inspections:** Perform regular inspections of electrical systems to guarantee safety compliance. This includes identifying potential hazards and implementing appropriate solutions.- **Collaborate with Team Members:** Work closely with other electricians and team members to complete projects on time. Good communication is key to ensuring everyone is aligned.**Required Skills and Expectations:**The ideal candidate should have a diploma in electrical engineering and possess practical knowledge of electrical systems. You must have strong troubleshooting and analytical skills to quickly resolve problems. Familiarity with safety procedures and regulations is essential. Additionally, the ability to read and interpret technical documents, excellent communication skills, and a proactive approach to work are necessary. Having basic computer skills for reporting and documentation is also expected.