Fresher Diploma Mechanical Engineer Jobs

Greeting From Vishakan Placement Service!!! Hiring Junior Process OperatorPosition: Junior Process Operator - E-Waste Chemical RecoveryDepartment: Production / Process OperationsIndustry: E-Waste Chemical RecoveryFresher Candidate OnlyQualification: ITI / Diploma/B.E Chemical Engineering, B.E Mechanical Engineering & Bsc. Chemistry background preferred.Shift Timing: 8 Hrs Rotational 1- Rotational Week-Off Reports To: Shift In-Charge / Production SupervisorJD:Handle and charge processed e-waste/raw materials into leaching tanks as per SOP and batch requirements.Handle process chemicals safely and follow approved chemical addition procedures.Operate leaching tanks, agitators, pumps, valves and chemical dosing systems.Monitor and record process parameters such as pH, temperature, level, time and agitation.Operate filter press/filtration equipment and handle slurry and filtrate safely.Collect, segregate, weigh and transfer sludge/filter cake/residues to designated areas.Assist in metal recovery processes such as precipitation, cementation or electrowinning as per SOP.Collect process samples and coordinate with QC/Lab for analysis.Maintain batch sheets, chemical consumption, production, recovery and shift records.Perform basic equipment checks and immediately report leaks, blockages, breakdowns or abnormalities.Follow PPE, EHS, chemical handling, LOTO and emergency procedures at all times.Maintain good housekeeping, 5S and cleanliness around the process area.Qualification: ITI / Diploma / 12th Science; B.E Chemical Engineering, B.E Mechanical Engineering & Bsc. Chemistry background preferred.Key Skills: Safety awareness, SOP compliance, basic chemical/process knowledge, teamwork, documentation and willingness to work in shifts.Fixed Salary:20 K CTC + ESI+ PF + Medical Insurance Overtime (OT) Policy - OT eligibility and applicable OT rates 1.5 TimesAllowances - attendance allowance, Chemical AllowancesCab / Transportation Facility - based on the timing and pick up from dedicated pointsAccommodation - Near Kandigai / Oragadam ( Company Provided)Food Facility / Meal Allowance - BF, Lunch and Dinner based shift basis and We provided on subsidy for the foodNo of openings: 35 Male candidate only Interview Process: HR Round-Technical Round Immediate Joiner Must Work Location:, Oragadam, Ezhichur Village(Sriperumpudur Taluk,Kanchipuram(DT) - 603 204)If Candidate Interested For Job Please Call Immediately & share your Cvs Call/Whatsapp: Vishakan Placement Service HR Pradeep jobvpservice@gmail.com

We are looking for a Fabrication Engineer to join our team in Surat. This entry-level position is suitable for candidates with a diploma in engineering and requires a passion for fabrication processes and techniques.Key Responsibilities:- Design and Develop Fabrication Plans: Create detailed plans for various fabrication projects, ensuring they meet specifications and industry standards.- Conduct Material Selection: Choose appropriate materials for fabrication based on project requirements, considering factors like strength, durability, and cost-effectiveness.- Oversee Fabrication Processes: Monitor and assist in the manufacturing process, ensuring that all operations are carried out efficiently and safely.- Quality Control Checks: Perform regular inspections of fabricated items to ensure they meet quality standards and project specifications, making adjustments as necessary.- Collaboration and Communication: Work closely with other engineers and team members to discuss project progress and address any issues or challenges that arise.Required Skills and Expectations:The ideal candidate should have a diploma in engineering and some basic understanding of fabrication techniques and tools. You should be able to read technical drawings and specifications clearly. Strong problem-solving skills and attention to detail are essential, as youll need to manage multiple projects while maintaining high quality. Good communication skills are important for working effectively with your team. A willingness to learn and develop skills in fabrication processes is expected, along with the ability to work in a fast-paced, hands-on environment.

Greeting From Vishakan Placement Service !!! Hiring Junior Process Operator Technician (Fresher Graduate)Position: Junior Process Operator Technician - E-Waste Chemical RecoveryDepartment: Production / Process OperationsIndustry: E-Waste Chemical RecoveryShift Timing: 8 Hrs Rotational 1- Rotational Week-Off Reports To: Shift In-Charge / Production SupervisorJD:Handle and charge processed e-waste/raw materials into leaching tanks as per SOP and batch requirements.Handle process chemicals safely and follow approved chemical addition procedures.Operate leaching tanks, agitators, pumps, valves and chemical dosing systems.Monitor and record process parameters such as pH, temperature, level, time and agitation.Operate filter press/filtration equipment and handle slurry and filtrate safely.Collect, segregate, weigh and transfer sludge/filter cake/residues to designated areas.Assist in metal recovery processes such as precipitation, cementation or electrowinning as per SOP.Collect process samples and coordinate with QC/Lab for analysis.Maintain batch sheets, chemical consumption, production, recovery and shift records.Perform basic equipment checks and immediately report leaks, blockages, breakdowns or abnormalities.Follow PPE, EHS, chemical handling, LOTO and emergency procedures at all times.Maintain good housekeeping, 5S and cleanliness around the process area.Qualification: ITI / Diploma / 12th Science; B.E Chemical Engineering, B.E Mechanical Engineering & Bsc. Chemistry background preferred.Experience: 0-4 years in chemical/process plants, metal recovery, e-waste recycling or related industries; freshers may be considered.Key Skills: Safety awareness, SOP compliance, basic chemical/process knowledge, teamwork, documentation and willingness to work in shifts.Fixed Salary:20 K CTC + ESI+ PF + Medical Insurance Overtime (OT) Policy - OT eligibility and applicable OT rates 1.5 TimesAllowances - attendance allowance, Chemical AllowancesCab / Transportation Facility - based on the timing and pick up from dedicated pointsAccommodation - Near Kandigai / Oragadam ( Company Provided)Food Facility / Meal Allowance - BF, Lunch and Dinner based shift basis and We provided on subsidy for the foodNo of openings: 35 Male candidate only Interview Process: HR Round-Technical Round Immediate Joiner Must Work Location:, Oragadam, Ezhichur Village(Sriperumpudur Taluk,Kanchipuram(DT) - 603 204)If Candidate Interested For Job Please Call Immediately & share your Cvs Call/Whatsapp: Vishakan Placement Service HR Pradeep jobvpservice@gmail.com

We are looking for a dedicated Production Engineer based in Shirwal. This is a full-time office position suitable for candidates with 0 to 2 years of experience in engineering. Ideal applicants should hold a diploma and be male.Key Responsibilities:- Oversee Production Processes: Monitor and optimize manufacturing processes to ensure efficiency and quality standards are met.- Troubleshoot Mechanical Issues: Identify and resolve technical problems that arise during production to minimize downtime and maintain workflow.- Collaborate with Team Members: Work closely with other engineers and workers to ensure smooth operations and to facilitate communication between departments.- Conduct Quality Control Checks: Implement regular checks and tests on products to maintain high-quality standards and compliance with safety regulations.- Document Production Data: Maintain accurate records of production metrics, issues, and improvements to help in future analysis and decision-making.Required Skills and Expectations:Candidates should have a solid understanding of production techniques and engineering principles. Proficiency in using standard engineering software and tools is essential. Good problem-solving skills are necessary for addressing production challenges quickly and efficiently. The ideal candidate should be a strong communicator, able to work well in a team, and possess a keen attention to detail for quality assurance. Willingness to learn and adapt to new technologies and processes is also important for success in this role.

Key ResponsibilitiesPlan and execute preventive, predictive, and breakdown maintenance activities.Diagnose equipment faults and implement corrective actions.Monitor machine performance and recommend improvements to enhance reliability.Maintain records of maintenance activities, repairs, and spare parts inventory.Coordinate with production teams to minimize downtime and optimize equipment utilization.Ensure timely servicing of plant machinery, utilities, and equipment.Manage spare parts procurement and inventory control.Implement TPM, 5S, and continuous improvement initiatives.Ensure compliance with safety standards and maintenance procedures.Support installation, commissioning, and modification of machinery and equipment.

We are looking for a Production Maintenance Engineer to join our team based in Butibori. The ideal candidate will oversee the maintenance of production machinery and ensure processes run smoothly. Key Responsibilities:- Equipment Maintenance: Regularly perform inspections and preventive maintenance on production machinery to minimize downtime and ensure operational efficiency.- Troubleshooting Issues: Identify and resolve mechanical problems in equipment promptly to maintain production schedules and meet targets.- Technical Support: Provide technical assistance and support to the production team, ensuring they understand proper machinery operation.- Documentation: Maintain accurate records of maintenance activities, repairs, and inventory of spare parts, ensuring compliance with company standards.- Collaboration: Work closely with other departments to coordinate maintenance activities and support production demands seamlessly.Required Skills and Expectations:Candidates should have a degree or diploma in engineering, ideally with a focus on maintenance or mechanical engineering. A solid understanding of machinery and experience in troubleshooting is essential. Good communication skills are necessary for effective teamwork.Attention to detail and problem-solving abilities are crucial for this role. Candidates must be able to work independently and exhibit a proactive attitude towards learning and improvement. A willingness to work a full-time schedule is expected, along with the ability to thrive in a fast-paced work environment.

We are looking for a Diploma/ B.Tech Mechanical Engineer to join our team in Mandi Gobindgarh, Fatehgarh Sahib. The ideal candidate can apply 0 to 6 years of experience. This role is mainly manufacturing plant and is open to male candidates.Key Responsibilities:1. Work in process of mechanical components and systems specifications to ensure high-quality production.2. Testing and Evaluation: Conduct tests on prototypes and existing products to ensure they meet safety and performance standards. You will analyze the results and recommend improvements.3. Collaboration: Work closely with cross-functional teams including production, quality assurance, and project management to ensure projects are completed on time and to specifications.4. Problem Solving: Identify and resolve technical issues that arise during the design and manufacturing processes. Your analytical skills will be crucial in troubleshooting and implementing solutions.5. Documentation: Maintain thorough documentation of design processes, revisions, and testing procedures. Accurate record-keeping will help in future projects and compliance.Required Skills and Expectations:The candidate must have a strong understanding of mechanical principles. Good problem-solving abilities and attention to detail are essential. Effective communication skills will aid in collaborating with team members. A proactive attitude towards learning and adapting to new technologies is also important for success in this role.

Key ResponsibilitiesPrepare and modify drawings using Solid works software.Create 2D and 3D models, assemblies, and technical drawings.Coordinate with production, quality, and purchase departments for design-related activities.Conduct design calculations and feasibility studies.Review and improve existing product designs for cost reduction and performance enhancement.Required SkillsProficiency in SolidWorks similar CAD software.Knowledge of engineering drawings & design standards.Understanding of manufacturing processes and materials.Good communication and coordination abilities.Educational QualificationBachelor's Degree / Diploma in Mechanical Engineering, Production Engineering, or related field.

Mechanical Engineer (01 Post) - Male/FemaleFreshers and experienced candidates are welcome to apply.Qualification: I.T.I. / Diploma / B. Tech in Mechanical Engineering.Experience in Railway Locomotive Bogie, AC/DC Traction Motor, maintenance, rehabilitation, or manufacturing will be preferred. Additional Preference: Candidates possessing a valid two-wheeler driving license and having their own two-wheeler will be given preference.

We are seeking a Mechanical Engineer to join our team in Canada. This role requires a hands-on approach and a passion for engineering principles. If you are a recent graduate or have up to six years of experience, we encourage you to apply.Key Responsibilities:- Design and Development: Create and analyze mechanical systems and components using design software to ensure they meet specifications and standards.- Testing and Evaluation: Conduct tests on prototypes to evaluate their performance and reliability, making adjustments as needed to improve functionality.- Collaboration: Work closely with other engineers and team members to solve design problems and optimize product performance, ensuring effective communication throughout the project.- Documentation: Maintain detailed records of designs, modifications, test results, and reports to support project tracking and compliance.- Project Support: Assist in project management tasks, including timelines and resource allocation, to ensure projects are completed on time and within budget.Required Skills and Expectations:Candidates should have a strong understanding of mechanical engineering principles acquired through education or experience. Proficiency in design software such as SolidWorks or AutoCAD is essential for creating accurate models. Effective problem-solving skills and the ability to work in a team environment are crucial for success in this role. Familiarity with testing methodologies and the ability to interpret technical drawings will be highly beneficial. A proactive attitude and eagerness to learn will help you thrive in our dynamic workplace.

We are seeking a Mechanical Engineer based in Makarpura GIDC, Vadodara, who is eager to grow their career in a dynamic environment. This full-time position is suitable for recent diploma graduates or those with up to two years of experience.Key responsibilities include designing and developing mechanical systems. You will create blueprints and technical specifications, ensuring all designs meet industry standards. Conducting tests and analyzing results is essential for improving product performance. You will also collaborate with other engineers and technicians to troubleshoot any issues during the manufacturing process, ensuring quality control.Additionally, you will prepare documentation and reports on project progress, maintaining accurate records to support future projects. Engaging in regular meetings will help you share ideas and updates with the project team.The ideal candidate should possess a strong understanding of mechanical engineering principles and be proficient in design software such as AutoCAD or SolidWorks. Excellent problem-solving skills are a must, along with the ability to work independently and as part of a team. Strong communication abilities will help you effectively share ideas and collaborate with colleagues. A keen interest in continuous learning and an attention to detail will drive your success in this role. Being punctual and committed to deadlines are also important expectations.

If fresh candidates apply, they will be given 10-15 days of training with salary. Both shift available night and day.The candidate must know Hindi and English languages.

design,develops,builds and tests mechanical and thermal devices,ranging from small components to large industrial machinery

We are looking for a motivated Mechanical Engineer to join our team in New Zealand. This role is suitable for both fresh graduates and those with up to 6 years of experience in the field. The ideal candidate should be passionate about mechanical systems and eager to learn and grow in their career.Key Responsibilities:- Design Development: Create and improve mechanical designs for various projects, ensuring they meet required specifications and standards.- Testing and Analysis: Conduct tests on mechanical components and systems, analyzing data to ensure performance and reliability.- Collaboration: Work closely with other engineers and teams to integrate mechanical components with other systems, ensuring seamless operation.- Problem Solving: Identify mechanical issues and troubleshoot problems, providing innovative solutions to enhance system performance.- Documentation: Prepare detailed reports and documentation for designs, tests, and modifications to keep all project records up-to-date.Required Skills and Expectations:- A foundational understanding of mechanical engineering principles, supported by a 12th-grade education or equivalent.- Strong analytical skills to assess designs and troubleshoot mechanical issues effectively.- Ability to work collaboratively within a team environment while also having the initiative to manage independent tasks.- Excellent communication skills to clearly convey ideas and technical information to peers and stakeholders.- A willingness to learn and adapt to new technologies and methods in mechanical engineering.

Greeting From Vishakan Placement Service Hiring ITI- Diploma mechanical candidate For Quality Engineer & Quality Online Inspection (Dy.Technician) Position in our leading Automotive Industry Tiruvallur Industry:Automotive Industry,Sheet Metal, Machining and Manufacturing Industry- Automobile component manufacture Role : Quality Online Inspection(Dy.Technician) Qualification: ITI/Diploma/B.E-B.Tech Mechanical/AutomobileExperience : Quality Online Inspection (2-4 Yrs) Skills: Strong knowledge in Quality Online inspection knowledge, good attitude and behavior, willing to work rotational shift Fixed Salary: 15K-18k Inhand -Fresher #Quality Online Inspection-20 K-30 K CTC+ESI+PF Benefits(Experience)Shift Timing : 06.00 am to 2.30 pm - 1st shift02.00pm to 09.50 pm - 2nd shift 09.50pm to 06.00am - 3rd shift 09.00 am to 05.30 pm & General shift Sunday Week OffTransport Facilities: Thiruvallur Railway StationThiruninravur Railway stationNo of openings: 50+Interview Schedule : Monday - Saturday / 10 AM- 12 PM & 2 PM-4 PM Interview Timing Interview Process: Direct Walkin Interview- HR Round - Technical Round - MD Round Immediate Joiner Must Work Location : Tiruvallur Candidate Preferred Location: Thiruvallur,Thirumazhisai,Poonamallee,Veppampattu,Thiruniravur, Sriperumbudur, thirumudivakkam,nemili,manavalanagar.Interested Candidate For Job Please kindly call immediately HR Pradeep -Vishakan Placement Service

Mechanical Quality Engineer:-Inspect castings as per approved quality standards and customer specifications.Perform dimensional inspection using measuring instruments such as Vernier calipers, micrometers, height gauges, and gauges.Assist in visual inspection and defect identification of castings.Support Non-Destructive Testing (NDT) activities such as UT, MT, PT, and hardness testing (under supervision).Prepare and maintain quality inspection reports and documentation.Monitor quality parameters during production and report deviations.Coordinate with Production and Foundry teams for corrective and preventive actions.Participate in root cause analysis for quality issues and implementation of corrective actions.Ensure compliance with ISO Quality Management System requirements and internal quality procedures.Follow safety rules and maintain housekeeping standards in the quality department.Perform any other responsibilities assigned by the Department Head.

Key ResponsibilitiesPrepare and revise 2D and 3D drawings using AutoCAD.Develop detailed engineering, manufacturing, architectural, or construction drawings as required.Interpret technical specifications, sketches, and design requirements.Coordinate with project teams to ensure drawing accuracy and compliance with standards.Prepare layouts, sectional views, and fabrication drawings.Maintain drawing records, revisions, and documentation.Conduct site measurements and incorporate changes into drawings when required.Ensure drawings comply with applicable codes, standards, and project specifications.Support project execution by providing technical drafting assistance.

As a CNC Operator, you will be responsible for operating and overseeing CNC machinery to create precision parts and products. This is a full-time position based in Tiruvallur.Key Responsibilities:- Set Up CNC Machines: Prepare machines for production by installing and aligning tools, fixtures, and workpieces according to specifications.- Read Technical Drawings: Examine blueprints and technical drawings to understand project specifications and ensure accurate production.- Monitor Machine Operations: Keep an eye on the performance of CNC machines during operation, making adjustments as needed to maintain quality.- Conduct Quality Checks: Use measuring tools to inspect finished products and ensure they meet required specifications and tolerances.- Maintain Equipment: Regularly clean and perform basic maintenance on machines to ensure they operate efficiently and safely.- Collaborate with Team: Communicate effectively with team members and supervisors to report issues, suggest improvements, and stay informed on project updates.Required Skills and Expectations:- A diploma in mechanical engineering or a related field is required, providing foundational knowledge for the role.- Familiarity with CNC machinery and tools is essential. Prior experience is a plus but not mandatory, as training will be provided.- Good attention to detail and precision to produce high-quality parts is crucial.- Basic problem-solving skills to troubleshoot minor machine issues are important.- Ability to work effectively in a team environment and communicate clearly with colleagues. Candidates should be eager to learn and adapt in a fast-paced manufacturing setting.