Automation Control Engineer Jobs

Job DescriptionTechnicom Engineers Network is looking for a motivated and technically skilled BMS Engineer to join our team. The candidate will be responsible for the installation, testing, commissioning, operation, troubleshooting and maintenance of Building Management System (BMS) and Building Automation Systems at various projects.Key Responsibilities* Install, configure, test and commission BMS and building automation systems.* Monitor and troubleshoot BMS-related issues at project sites.* Work with HVAC control systems and associated field devices.* Handle BMS controllers, sensors, actuators, panels and related equipment.* Perform system integration and communication testing.* Work with communication protocols such as BACnet, Modbus and other relevant protocols.* Coordinate with project, electrical, HVAC and other technical teams during installation and commissioning.* Carry out preventive maintenance, fault finding and corrective actions.* Prepare and maintain site reports, testing/commissioning records and other technical documentation.* Support project execution and ensure work is completed according to required quality and safety standards.* Travel to project sites as required.Required Skills* Good understanding of BMS / Building Automation Systems.* Knowledge of HVAC controls.* Basic knowledge of DDC / PLC / SCADA will be an advantage.* Knowledge of BACnet / Modbus is preferred.* Ability to troubleshoot electrical/control-system-related issues.* Good communication and coordination skills.* Willingness to work at project sites.

We are seeking a skilled Mechanical Engineer with 2 to 3 years of experience to join our team. This role will primarily be work from home, allowing flexibility in how you manage your tasks. **Key Responsibilities:**- **Design and Development:** Create detailed designs for mechanical systems and components, ensuring they meet specified requirements and performance standards.- **Prototyping and Testing:** Build prototypes of mechanical designs and conduct tests to evaluate their functionality and durability, identifying any necessary improvements.- **Collaboration:** Work closely with other engineers and team members to ensure designs meet project timelines and specifications, fostering teamwork and communication.- **Technical Documentation:** Prepare technical reports and documentation for designs and testing procedures, supporting compliance with industry standards.- **Problem Solving:** Diagnose and troubleshoot mechanical issues in projects, developing effective solutions to enhance system efficiency.**Required Skills and Expectations:**Candidates must hold a B.E. in Mechanical Engineering. Experience working in design software such as AutoCAD or SolidWorks is essential. Strong analytical and problem-solving skills are necessary to address complex mechanical issues. Candidates should have excellent communication abilities to work collaboratively in a team setting, adapting to remote work dynamics. Attention to detail is crucial, as the designs must adhere to safety and performance standards. A proactive attitude towards learning new technologies and techniques in mechanical engineering will be highly valued.

As an Electrical Automation Engineer, you will be responsible for designing, developing, and maintaining electrical automation systems. You will work closely with various engineering teams to ensure efficiency and reliability in production processes. Your role will include:- **System Design and Development**: Creating detailed designs for electrical automation systems, ensuring they meet project requirements and industry standards.- **Installation and Commissioning**: Overseeing the installation and commissioning of automation systems, ensuring they are set up correctly and function as intended.- **Troubleshooting and Maintenance**: Diagnosing issues in existing automation systems and implementing effective solutions to minimize downtime.- **Collaboration with Teams**: Working alongside mechanical and software engineers to integrate systems and optimize overall performance.- **Documentation and Reporting**: Maintaining clear documentation of all designs, modifications, and troubleshooting procedures, and preparing regular reports for management.To be successful in this role, you should possess a B.E or an equivalent advanced/higher diploma, along with 2 to 5 years of relevant experience in electrical automation. Proficiency in programming languages related to automation systems is essential. You should also have a strong understanding of electrical circuits, sensors, and control systems. Effective communication skills and the ability to work collaboratively in a team environment are important. A willingness to learn and adapt to new technologies will also contribute to your success in this position.

We are seeking a Quality Assurance Engineer with 2 to 4 years of experience to join our team in Jalandhar, India. The ideal candidate will ensure our products meet high-quality standards through systematic testing processes.Key Responsibilities:- Develop and execute test plans: Create detailed testing strategies and schedules to verify product functionality and performance.- Identify and report defects: Conduct thorough testing to find and document software issues, communicating them clearly to the development team for resolution.- Collaborate with teams: Work closely with developers, product managers, and other stakeholders to understand product requirements and ensure quality standards are met.- Maintain quality documentation: Keep accurate records of test cases, results, and procedures to support ongoing quality assurance efforts.Required Skills and Expectations:The candidate must have a diploma in a relevant field and demonstrate a strong understanding of software testing methodologies. Experience with various testing tools and techniques is essential. The ideal candidate should possess effective communication skills to collaborate with team members and report findings clearly. Attention to detail and problem-solving abilities are critical for identifying issues and ensuring product quality. A proactive approach to learning and adapting to new technologies is also expected. The role will be performed in-office, and only male candidates should apply.

2. Service Engineer - Automation & Controls (Machine Tools & SPM)Base Location: KhopoliExperience: 4-6 YearsReporting To: Service Manager / Controls HeadTravel: Pan-India & International (Extensive)Role OverviewThe Automation & Controls Service Engineer will handle PLC, HMI,drives, commissioning, troubleshooting, and logic modifications formachine tools and SPMs. The role involves extensive field service, newinstallations, and breakdown support.When in the office, the engineer will provide remote/online support,maintain backups, assist internal teams, and support spare parts andservice operations.Key Responsibilities* PLC, HMI, and drive configuration, programming, and debugging* Machine commissioning, startup, and I/O health checks* Troubleshooting automation, electrical, and control system issues* Integration with mechanical and electrical systems* Online/remote technical support to customers* Maintenance of PLC/HMI backups and service documentationQualifications & Skills* Diploma / BE / BTech in Electrical, Electronics, Mechatronics, orInstrumentation* 4-6 years of automation service experience in machine tools orSPMs* Strong hands-on experience with PLCs, HMIs, and drives* Experience with Siemens and/or Beckhoff systems (preferred)* Knowledge of industrial communication protocols (Profibus, Modbus,Ethernet/IP)* Willingness to travel extensively

Digitron India Pvt. Ltd. is looking for an experienced and skilled L2 Engineer to join our growing technical team. The ideal candidate should have handson experience in CCTV installation & troubleshooting, Access Control Systems, and hardwarelevel networking.This role involves up to 70% travel Pan India, so field-readiness and flexibility are essential.Key ResponsibilitiesInstall, configure, and maintain CCTV, ACS, and related ELV systems.Diagnose and troubleshoot onsite technical issues independently.Manage networking devices such as switches, routers, and LAN/WAN setups.Coordinate with clients and internal teams for smooth project execution.Prepare installation reports, service logs, and documentation.Provide Level 2 support for escalated technical issues.Travel to client sites as per project requirements.Required SkillsStrong technical troubleshooting skills in ELV Systems (CCTV, ACS, Networking, OFC, Wireless Devices, VMS, etc.)Ability to resolve on-site technical & operational issues independentlyProject Management & Vendor Management abilitiesTeam Management & Client Coordination skillsStrong documentation & reporting skillsGood verbal and written communicationProfessional behaviour and etiquettesUnderstanding of ground work & civil work (as per requirement)Resource planning & arrangementWillingness to travel frequently (Pan India)RequirementsEducation: Diploma or B.E. in Electronics, Electrical, Computer Science, or related fieldExperience: 35 years in CCTV, ACS, ELV systems & networkingStrong knowledge of IP Cameras, NVR/DVR, biometric systems & network architectureAbility to read wiring diagrams and site layoutsStrong client-handling and communication skillsMust be open to traveling up to 70% of the timeBenefitsCompetitive salary up to 35,000 per monthTravel and site allowances as per company policyOpportunity to work on large-scale infrastructure & security projectsSkill development and technical training supportHow to ApplySend your updated resume to: hr@digitronindia.in 9227988489 (Between 10:00 AM to 07:00 PM)

Key Responsibilities:1. Design and develop industrial automation systems: In this role, you will be responsible for designing and developing automation systems for industrial processes, ensuring efficiency and reliability.2. Program PLCs and HMIs: You will be required to program Programmable Logic Controllers (PLCs) and Human Machine Interfaces (HMIs) to control various machinery and processes in industrial settings.3. Troubleshoot and maintain automation systems: You will need to troubleshoot any issues that arise with automation systems and perform regular maintenance to ensure optimal performance.4. Collaborate with cross-functional teams: As an Industrial Automation Engineer, you will work closely with other engineering teams, production teams, and technicians to integrate automation solutions and optimize processes.5. Stay updated on industry trends and technologies: You will be expected to keep yourself informed about the latest trends and technologies in industrial automation to enhance systems and processes continuously.Required Skills and Expectations:1. Bachelor's degree in Engineering, preferably in Electrical or Mechanical Engineering.2. Knowledge of PLC programming and HMI development.3. Strong problem-solving skills and the ability to troubleshoot technical issues.4. Good communication skills and the ability to work effectively in a team.5. Attention to detail and a proactive approach to work.6. Willingness to learn and adapt to new technologies in the field of industrial automation.

Terramatic Solutions Pvt. Ltd. is expanding and looking for a passionate Application Engineer to join our automation team. The role involves application design, system configuration, commissioning, and technical support for smart building solutions.Key ResponsibilitiesDesign, configure, and implement automation applicationsWork with GRMS, KNX, DALI, Lighting Control, and HVAC systemsPrepare technical documentation, logic sheets, and drawingsSupport site commissioning, testing, and troubleshootingCoordinate with project, production, and site teamsProvide technical support during execution and handoverRequired Qualifications & SkillsDiploma / BE / BTech in Electronics, Electrical, or AutomationExperience in Building Automation / Smart Lighting / GRMSKnowledge of KNX, DALI, 010V, Phase Dimming, and Relay LogicAbility to read electrical drawings and schematicsGood problem-solving and communication skillsWillingness to travel to project sites

Job Overview:We are seeking a highly skilled Senior Industrial Automation Engineer with 7-8 years of experience in the oil & gas industry. The ideal candidate will be responsible for designing, implementing, and maintaining industrial automation systems, with expertise in PLC programming, control panel design, and project lifecycle management.Key Responsibilities: Design and engineer control systems for oil & gas projects Program and troubleshoot PLCs (Siemens, Schneider, Rockwell) Develop and review technical documentation including P&ID, cause and effect diagrams, and system architecture Design control panels (PLC/marshalling panels) and select appropriate components Create wiring diagrams and electrical schematics Conduct Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) Manage full project lifecycle from design & engineering through execution, FAT/SAT, and commissioning Work with redundant PLC systems (hot standby, dual processor configurations) Collaborate with cross-functional teams to ensure project success Provide technical support during commissioning and operation phasesTechnical Requirements: Proficiency with AutoCAD for electrical and instrumentation drawings Expertise in PLC/HMI/SCADA software platforms Strong MS Office skills for documentation and reporting Hands-on experience with industrial communication protocols Knowledge of instrumentation and control systems in hazardous areasProject Experience: Minimum 7 years in oil & gas industry projects Experience with control system design and implementation Familiarity with industry standards and safety regulations

Roles & Responsibilities-To manage all technical aspects of production including BOM creation, wiring diagrams, quality assurance, and supporting assembly teams.Requirement Skills-Prepare, update, and validate BOMs, wiring diagrams, and panel layouts-Support creation of job cards (MJC, PJC, RJC) from technical perspective-Perform and document quality control checks-Coordinate with workers for correct assembly & wiring practices-Maintain document revisions, project history, and customer-specific versions-Participate in training, testing, and custom project execution-Provide technical input to design or troubleshooting when requiredWork Location-Factory (SANAND)Job Type-Full-time Duty: 10:00 am to 6:30 pmWeek Off-Sunday (1st & 3rd Saturday)

Perform troubleshooting, repair, inspection, and maintenance of marine electrical and automation systems onboard vessels and shipyards.Install, configure, and commission:Navigation systems (Radar, Gyro Compass, GPS, ECDIS, Autopilot)Communication systems (VHF, MF/HF, GMDSS, Satcom)Engine room automation and monitoring systems (AMS, PLC, I/O Systems, Control Panels)Electrical distribution equipment (Switchboards, MCCs, Transformers, Breakers)Conduct fault diagnosis using test instruments (multimeters, loop testers, oscilloscopes, etc.).Perform wiring, cable routing, termination, and panel assembly as required.Read and interpret technical manuals, electrical drawings, P&ID, and system schematics.Prepare service reports, job completion notes, and update documentation.Coordinate with ship crew, shipyards, and internal teams for smooth execution of work.Travel to shipyards, offshore anchorage, customer sites as required (short notice work possible).Minimum 4+ years hands-on experience in marine electrical/automation field.Strong knowledge of marine navigation, communication, or engine room automation systems.Ability to independently troubleshoot and resolve faults onboard.Good understanding of control circuits, sensors, PLC logic, relays, and signal loops.Familiarity with brands such as Furuno, JRC, Raytheon Anschtz, Sperry, Sailor, Skipper, Yokogawa, Siemens, HMI/SCADA, etc. is an advantage.Comfortable working onboard vessels, engine rooms, and shipyards.Ability to work under pressure and meet operational timelines.

Sales Engineer IIoT / Automation SolutionsRole Overview:We are seeking a Sales Specialist / Sales Engineer to drive business development for our Industrial IoT and Automation Solutions. The candidate will bridge technical understanding with customer needs, manage end-to-end sales cycles, and build long-term client relationships.Key Responsibilities:Identify potential clients and build a strong sales pipeline.Understand customer challenges and propose suitable automation or IoT solutions.Conduct product demos, presentations, and proof-of-concept sessions.Prepare proposals, negotiate terms, and close business deals.Maintain strong relationships with existing clients and explore upselling opportunities.Required Skills & Experience:B.Tech in Engineering with MBA (preferred).34 years of experience in automation, IIoT, or industrial sales.Good understanding of control systems, SCADA, IoT, and smart manufacturing.Excellent communication, negotiation, and presentation skills.Proven record of meeting or exceeding sales targets.

Congratulations! Your CV has been shortlisted for the position of QA/QC Engineer.Job Title: QA EngineerJob Locations: Singapore, New Zealand, Canada, Dubai, Oman, Saudi Arabia, UAEContract Duration: 2 Years (Renewable)Salary Range: 80,000 to 6,00,000 INR per month (Depending on experience and location)Benefits: Free Food & AccommodationEducation Qualification: Bachelors Degree or Diploma in Engineering (Mechanical, Civil, Electrical, or related field)Eligibility: Candidates with a valid passport are eligible to applyKey Responsibilities:Quality Monitoring: Oversee and ensure that materials, workmanship, and project execution meet specified quality standards and codes.Documentation & Reporting: Maintain quality records, test reports, inspection logs, and submit regular quality assurance documentation.Conduct Inspections: Perform internal audits and inspections at various stages of project execution to verify quality compliance.Non-Conformance Handling: Identify and document non-conformances, investigate root causes, and coordinate with relevant teams to implement corrective actions.Liaise with Clients & Contractors: Communicate quality-related issues and updates with clients, consultants, and subcontractors.Additional Information:Free food and accommodation provided for the full contract period.Must be willing to relocate to any of the specified countries.Great opportunity for international career growth in QA/QC.How to Apply:Interested candidates with a valid passport can contact the HR Team:Muskan Ahmed+91 8981753516

Designation:- Quality Assurance EngineerQualification:- BSc (Maths /Physics/Botany) or Diploma/Degree in Mechanical EngineeringExperience:- 2 Years To 5 Years Salary:-18,000 To 23,000Gender:- MaleJob Location:- Palghar,Maharashtra Industry:- Manufacturing Company

Responsibilities:1. Designing, developing and implementing automated systems for control and monitoring of equipment and processes.2. Programming PLCs and HMI interfaces to control various systems and devices.3. Troubleshooting and resolving problems with automation systems.4. Performing regular maintenance and testing of automated systems.5. Collaborating with other engineers and technicians to ensure smooth operation of automated systems.6. Updating and maintaining documentation for automation systems.

Position Title:- Design Engineer (Robotics & Automation)Department:- Design & DevelopmentReporting To:- Design Head / Project ManagerLocation:- D-8, Sector 63, Noida, Near Electronic City MetroPosition Overview:We are looking for an innovative and detail-oriented Design Engineer to join our robotics and automation team. The candidate will be responsible for developing, modifying, and improving designs for robotic machines and custom automation solutions. The role demands expertise in mechanical design, 3D modeling, and hands-on involvement in prototyping and production support.Key Responsibilities: Conceptualize and develop designs for robotic systems and automation projects. Prepare 3D models, assembly drawings, and detailed component drawings using SolidWorks, AutoCAD, or equivalent software. Create accurate and detailed Bill of Materials (BOM). Perform load analysis, stress calculations, and basic simulations where required. Select appropriate materials and standard components (motors, actuators, sensors, fasteners, bearings, etc.) Collaborate closely with production, procurement, and project teams to ensure feasibility and timely completion of projects. Optimize existing designs to improve performance, manufacturability, and cost-effectiveness. Support the assembly team in understanding drawings and resolving design-related queries during fabrication and commissioning. Maintain and update design records, version control, and technical documentation.Required Technical Skills: Proficiency in SolidWorks, & AutoCAD, Hands-on knowledge of Geometric Dimensioning and Tolerancing (GD&T). Understanding of pneumatics, hydraulics, and electro-mechanical systems is added advantage. Knowledge of robotic system components: motors, drives, sensors, actuators, etc. Familiarity with sheet metal, machining, fabrication processes, and material selection. Ability to create 2D and 3D drawings, assembly drawings, and exploded views.Qualification:B.E. / B.Tech/Diploma in Mechanical, Mechatronics, Automobile, or Production Engineering.1-2 years of experience in design and development, preferably in robotics, automation, or special purpose machine (SPM) manufacturing.Soft Skills: Strong communication and interpersonal skills. Excellent problem-solving ability. Team coordination and leadership potential. Ability to handle multiple projects simultaneously under tight deadlines. Positive attitude with a willingness to learn and grow.Salary & Benefits:As per industry standards / Negotiable based on experience.Performance-based incentives.Opportunity to work on advanced robotic technologies and automation systems.About DSI Robotic:DSI Robotic is a technology-driven company specializing in the design, development, and deployment of robotic systems and industrial automation solutions. We cater to industries like manufacturing, infrastructure, process automation, and special-purpose machinery, delivering cutting-edge and customized robotic solutions.HR - Preeti ChaudharyContact Number - 9540761044Mail - hr@dsirobotics.com

Role: Electrical Automation EngineerWork Experience: 0-1 years.Work Location: Delhi NCRMust-Have Skills: SCADA, PLC, HMI, VFD.Job Description:Development, Programming, Troubleshooting & Modification: Should have expertise in Development, Programming, troubleshooting & Modification of automation Products (PLC, HMI/SCADA, VFD, SERVO, RTU etc).Commissioning: Visiting onsite to ensure if commissioning is done within the time frame. Providing timely Feedback on the ground realities through documentation to the Core Engineering and Manufacturing teams. Strong analytic, verbal, and written communication skills.contact on +91-8882999066

BMS Engineer - Urgent HiringTechnicom Engineers Network is looking for an experienced and technically skilled BMS Engineer to join our team. The candidate will be responsible for handling Building Management System (BMS), Building Automation and HVAC control systems across our projects.Key Responsibilities* Installation, testing and commissioning of BMS and Building Automation systems.* Configuration and monitoring of BMS systems and controllers.* Handling HVAC control systems, sensors, actuators and DDC controllers.* Troubleshooting BMS, HVAC control and communication-related issues.* Carrying out preventive and corrective maintenance of BMS systems.* Working with communication protocols such as BACnet and Modbus.* Coordinating with electrical, HVAC, project and site teams for smooth project execution.* Performing system testing, integration and commissioning at project sites.* Preparing site reports, testing/commissioning documents and other technical records.* Identifying faults and providing appropriate technical solutions.* Ensuring project work is completed according to required quality and safety standards.* Willingness to travel to project sites as required.Required Skills* Strong knowledge of BMS / Building Management Systems.* Hands-on experience in Building Automation.* Knowledge of HVAC Controls and DDC.* Experience in BMS installation, commissioning and troubleshooting.* Knowledge of BACnet / Modbus.* Understanding of sensors, actuators, controllers and BMS panels.* Knowledge of PLC/SCADA will be an added advantage.* Good technical, communication and coordination skills.* Ability to work independently as well as with project/site teams.Educational QualificationDiploma / B.E. / B.Tech in Electrical, Electronics, Instrumentation, Mechanical Engineering or a related field.Experience3-4+ years of relevant hands-on experience in BMS / Building Automation / HVAC Controls is preferred.Candidates with experience in BMS platforms such as Siemens, Schneider, Honeywell, Johnson Controls, Delta, Trane or other similar systems will be preferred.