Heat Load Calculation Jobs in

Job Title: HVAC Site Supervisor Operation & Maintenance (O&M)Department: OperationsLocation: Site Based (as per project)Reporting To: Project / O&M ManagerCompany: OM SAI SERVICES________________________________________ Job Purpose:To ensure smooth and efficient operation, maintenance, and troubleshooting of all HVAC systems (VRF, Chillers, AHUs, FCUs, Split & Cassette Units) at client sites. The role requires hands-on supervision, technical expertise, and coordination with technicians, clients, and management to maintain system performance and uptime.________________________________________ Key Responsibilities:1. Site Operation & Supervision Supervise daily operation of HVAC systems and ensure 100% uptime of critical equipment. Monitor parameters such as temperature, pressure, current, and refrigerant levels. Assign and oversee work of HVAC technicians and helpers on-site. Ensure adherence to preventive maintenance schedules.2. Preventive & Breakdown Maintenance Plan and execute preventive maintenance activities as per OEM / company standards. Diagnose faults, perform root cause analysis, and ensure timely rectification. Maintain logbooks, service records, and checklists for all HVAC equipment. Coordinate with vendors for major repair or replacement work.3. Technical & Documentation Maintain detailed records of maintenance, breakdowns, and spares consumption. Prepare and submit daily, weekly, and monthly O&M reports. Verify maintenance checklists, safety documents, and client feedback forms. Monitor inventory of tools, consumables, and spares at the site store.4. Safety & Compliance Ensure all technicians follow safety procedures and use PPE during operations. Conduct site toolbox meetings and safety briefings regularly. Report any unsafe condition or near-miss incident to management immediately.5. Client Coordination & Communication Serve as the single point of contact for all client communications related to HVAC systems. Attend client meetings, explain maintenance plans, and resolve complaints. Ensure all O&M work is executed as per AMC / SLA terms.________________________________________ Qualification & Experience: Diploma / ITI in Mechanical or HVAC Engineering. Minimum 36 years of experience in HVAC Operation & Maintenance (preferably with VRF, Chillers, and centralized systems).________________________________________ Skills & Competencies: Strong knowledge of HVAC systems, refrigerants, and control systems. Leadership and team management skills. Good communication and client-handling ability. Proficient in reporting, documentation, and MS Excel / mobile-based CRM tools. Ability to work under pressure and manage multiple sites if required.________________________________________

Responsibilities: -1) Knowledge about Chiller Units, VRV, Ventilation System.2) To make Costing for given tender/BOQ.3) Understand BOQ and prepare effective offer.4) Floating the enquiries and taking real time rates for materials from vendors.5) Understand the customers requirements and communicate with Internal clients.6) Register new enquiry within system and with OEM.7) Follow up with customers for finalization of Tenders. 8) Calculate Heatload & design BOQ as per requirement.9) Excellent communication skills both oral & written.

Responsibility :- Would be responsible for handling the HVAC branch of theorganization.Attending client meetings, visiting sites , taking input from site , Making drawings asper input , Client handling for assign project , making bill of quantities ., vendorassessments , technical specifications preparationQualification B.E Mechanical/ Diploma in Mechanical engineeringSkills Required Should be fluent in English. Should have good communication skill.7-8+ years of experience in design of HVAC segmentExpertise in heat load calculations , CFD analysis , ventilation designs , VRF, VAV,VRV ,chiller ,cooling tower, pipe sizing , duct sizing designs, compressed air pipingetc.Have expertise in technical specifications preparations of above systemsShould have experience in AutoCAD, MS office, Word,Experience candidate from MEP consultancy ,HVAC consultancy and freelancers canapplyCandidate preference male or female

Prepare technical drawings, specifications of Home automation , fresh air & building ventilation and central vacuum systems to ensure that installation and operations conform to standards and customer requirements. Operate computer-assisted engineering or design software or equipment to perform engineering tasks. Confer with engineers, customers, or others to discuss existing or potential engineering projects or products. Design, implement, maintain, or improve instruments, equipment, facilities, components, products, or systems Prepare specifications for purchases of materials or equipment. Perform detailed calculations to compute and establish manufacturing, construction, or installation standards or specifications. Plan or implement research methodology or procedures to apply principles of mechanical or electrical theory to engineering projects Continually improve collaboration between engineering, sales, and operations to build internal relationships and service level agreements to meet and exceed customer expectations. Knowledge of HVAC, Plumbing, Fire Fighting, Low Current / Extra Low current/ ELV system, and BMS for Estimation, Material Procurement, Coordination. Knowledge of design techniques, tools, and principals involved in production of precision technical plans, blueprints, drawings, and models. Knowledge of CAD systems and efficient in using of AutoCAD 2018 / Inventor tools. Knowledge of machines and tools, including their designs, uses, repair, and maintenance. Knowledge of relevant equipment, policies, procedures, and strategies to promote effective local, state, or national security operations for the protection of people, data, property, and institutions. Prepare MEP Estimation Quantities Sheet and Costing Sheet. Prepare of Electrical , mechanical Drawing like Shop Drawings, Section Drawings, Co-ordination Drawings, SLD/Schematic Drawings. Prepare the Bill of Quantity (BOQ). .

Prepare technical drawings, specifications of Home automation , fresh air & building ventilation and central vacuum systems to ensure that installation and operations conform to standards and customer requirements. Operate computer-assisted engineering or design software or equipment to perform engineering tasks. Confer with engineers, customers, or others to discuss existing or potential engineering projects or products. Design, implement, maintain, or improve instruments, equipment, facilities, components, products, or systems Prepare specifications for purchases of materials or equipment. Perform detailed calculations to compute and establish manufacturing, construction, or installation standards or specifications. Plan or implement research methodology or procedures to apply principles of mechanical or electrical theory to engineering projects Continually improve collaboration between engineering, sales, and operations to build internal relationships and service level agreements to meet and exceed customer expectations. Knowledge of HVAC, Plumbing, Fire Fighting, Low Current / Extra Low current/ ELV system, and BMS for Estimation, Material Procurement, Coordination. Knowledge of design techniques, tools, and principals involved in production of precision technical plans, blueprints, drawings, and models. Knowledge of CAD systems and efficient in using of AutoCAD 2018 / Inventor tools. Knowledge of machines and tools, including their designs, uses, repair, and maintenance. Knowledge of relevant equipment, policies, procedures, and strategies to promote effective local, state, or national security operations for the protection of people, data, property, and institutions. Prepare MEP Estimation Quantities Sheet and Costing Sheet. Prepare of Electrical , mechanical Drawing like Shop Drawings, Section Drawings, Co-ordination Drawings, SLD/Schematic Drawings. Prepare the Bill of Quantity (BOQ)

Hiring for 1 Project Sales Engineer Job in Delhi,Dehradun, with minimum 1 Year Experience,Required Educational Qualification is : Diploma with Good knowledge in Heat Load Calculation,Estimation,BOQ Preparation,Tendering,Hvac Engineer,Hvac Design,Auto CAD Operator etc.

Job Location: Kota, RajasthanSUMMARY OF MAIN RESPONSIBILITIESTo provide Design, Technical Document, Drawing, Data Sheet and Project Data support to Technical Team andAnyone related to the project as and when desired.The post holder will be assigned to the Technical Department however may also be required to undertake otherduties as and when required.SPECIFIC RESPONSIBILITIES1.) To Design & Check in detail including but not restricted to, Heat Load Calculation, Equipment Selection, Layout of Equipment, Electrical Load Calculations etc.2.) To Draw & Check in detail including but not restricted to, GA Drawings, Duct Layout, Electrical Layout, Panel Drawing, etc.3.) Participate fully in all team meetings, supervisions, and problem solving.4.) Work to ensure professional and co-operative working relationships within own department and with other departments across the Company5.) Provide support and cover for other team members as and when required6.) Ensure efficient use of resources in place to facilitate the work being carried out.7.) Ensure Safety of Data being provided and the same not being shared to anyone outside the company without prior written consent.8.) To visit site when required to provide support to Site team, if required, at any point of the project.

Removing old systemsInstalling new systemsPerforming routine maintenanceTraining junior team membersCommunicating with clients and customersOrdering and maintaining equipmentMeeting local HVAC codes

We have vacant of 2 hvac supervisor Jobs in Thane,Navi Mumbai,Mumbai, for Freshers Educational Qualification : Diploma, B.Tech/B.E Skill HVAC-Heating Ventilation and Air Conditioning,Refrigeration,Heat Load Calculation etc.

We are looking for 2 HVAC Technician Posts in Thane,Mumbai, with deep knowledge in HVAC-Heating Ventilation and Air Conditioning,Heat Load Calculation and Required Educational Qualification is : Secondary School

We have vacant of 2 HVAC Design Engineer Jobs in Pune, Experience Required : 1 Year Educational Qualification : B.Tech/B.E Skill HVAC-Heating Ventilation and Air Conditioning, Heat Load Calculation etc.Designed, prepared BOQs & cost estimation for cleanrooms ofvarious Pharmaceutical projects implementing DX/Chilled watersystems. Designed ventilation systems for general manufacturing facilities. Client Co-ordination & understanding their requirement throughonline meetings. Heat Load calculations, Hvac layout preparations, planning Forexecution & Preparing Qualification documents. Developed high-quality engineering designs and plans to meetindustry standards.

An HVAC Technician is responsible for installing, repairing, and conducting maintenance on equipment like furnaces that require constant care. They also diagnose problems with system integrity so they can be fixed quickly in case there's ever an emergency situation.

Hiring for 2 HVAC Engineer Jobs in Thane West, call/whatsapp on 9892510181. Required Educational Qualification is : BE (Mechanical) with Good knowledge in drawing in autocad software, experience in chillers, collers, air conditioners,ducting & piping drawing

Requirement for Hvac Supervisor. all Equipments Installation , Hvac Service , Project Supervision

We are looking for 2 HVAC Technician Posts in Indore, with deep knowledge in HVAC-Heating Ventilation and Air Conditioning,Heat Load Calculation and Required Educational Qualification is : Vocational Course, Diploma

An HVAC estimator analyzes the scope of a proposed heating, ventilation, and air conditioning project to create a detailed estimate of the project's cost. As an HVAC estimator, you consider the cost of labor and materials and describe what is needed for your client's consideration.HVAC estimators have a wide range of responsibilities, which can includePreparing proposals for bids on new construction projects or retrofitting existing buildings to meet energy efficiency standardsCollecting information about the clients business needs and goals, including square footage requirements, desired temperature range, ventilation requirements, etc.Calculating the cost of materials and labor required to complete the project, including taxes and feesCreating an estimate of materials and labor costs based on the scope of the job, including any materials that need to be purchased and any equipment that needs to be rented or purchasedPreparing drawings of space layouts and equipment placement to illustrate the scope of work involved in a projectPreparing cost estimates for projects using hand calculations or computer software such as Excel spreadsheets or AutoCAD programsWorking with architects and designers to ensure that building plans meet code specifications regarding safety and energy efficiencyCommunicating regularly with clients to provide updates on project progress and address any concerns or issuesManaging subcontractors to ensure that all work is completed according to specifications and within budget parameters

nstalling, maintaining, and repairing ventilation and air conditioning systems and equipment. Identifying maintenance risks on equipment. Diagnosing electrical and mechanical faults for HVAC systems. Cleaning, adjusting, and repairing systems, and performing warranty services.

Hiring for 1 HVAC Project Engineer Job in Guwahati, Assam, with minimum 5 Years Experience,Required Educational Qualification is : Diploma, B.Tech/B.E with Good knowledge in HVAC-Heating Ventilation and Air Conditioning,Microsoft Office,AutoCAD,Heat Load Calculation etc.

Heat treatment operators use and oversee a range of equipment, including:- Vacuum Furnaces- Gas Furnaces- Oxyacetylene Torches- Salt or Chemical Cleaning BathsUsing computer-controlled equipment.Setting times and temperatures, and making adjustments where necessary.Using conveyor belts, hoists or forklift trucks to load the components ready for the furnaces.Flame-hardening items.Unloading the furnaces and dealing safely with any waste products.Blasting components with a stream of shot to clean them.Cooling (quenching) components in salt, oil or chemical baths.Ensuring the machinery is in good repair, performing basic maintenance and calling for technical help if a problem arises.Testing samples for quality.Recording results on a computer.

HVAC Design Engineer Duties and ResponsibilitiesHVAC design engineers perform various job duties based on the size of the heating and cooling projects they work on, the type of property where systems are needed, and the heating and cooling needs of customers. However, these core job tasks are the same despite these differences:Design HVAC SystemsHVAC design engineers create heating and cooling systems and their controls.Calculate Heating and Cooling NeedsHVAC design engineers make load calculations to determine how much heating and cooling power various equipment must put out in order to heat or cool spaces when needed.Interpret and Draft PlansHVAC design engineers read and interpret construction plans, schematics, and blueprints for new construction projects. They also draft new plans to design ductwork and piping systems.Calculate Ventilation RequirementsHVAC design engineers calculate ventilation requirements based on the types of systems needed.Determine Budget CostsHVAC design engineers determine costs for heating and cooling systems and write up detailed budget estimates.Coordinate with OthersHVAC design engineers coordinate and collaborate with architects and engineers when designing heating and cooling systems.Adhere to All Building CodesHVAC design engineers follow all building codes and obtain proper building permits when necessary.

Conducting routine maintenance on heating and cooling systems.Diagnosing and repairing malfunctioning equipment, such as refrigeration systems, air conditioning units, and heating pumps.Performing installations of new heating and cooling systems.Maintaining accurate records of equipment repairs and maintenance.Troubleshooting issues with electrical and mechanical components of HVAC systems.Collaborating with team members and management to ensure customer satisfaction.Adhering to safety procedures and guidelines while on job sites.Timely completion of work orders.Knowledge of heating and cooling systems, including refrigeration systems, air conditioning units, and heating pumps