Technician Job Vacancies in Andhra Pradesh

An Aircraft Maintenance Technician is responsible for inspecting, maintaining, repairing, and ensuring the airworthiness of aircraft systems and components. They play a critical role in aviation safety by performing routine maintenance checks and troubleshooting mechanical or technical issues. Key ResponsibilitiesPerform scheduled and unscheduled maintenance on aircraftInspect aircraft systems, engines, and components for faults or wearDiagnose mechanical and electrical issues using testing equipmentRepair or replace defective aircraft partsConduct pre-flight and post-flight inspectionsEnsure compliance with aviation safety regulations and standardsMaintain accurate maintenance logs and documentationCoordinate with engineers, pilots, and ground staffFollow strict safety procedures and quality standards Core DutiesEngine inspection and servicingHydraulic and electrical system maintenanceTroubleshooting avionics and mechanical systemsTesting aircraft performance after repairsUsing technical manuals and diagnostic tools Qualifications & RequirementsDiploma or Degree in Aircraft Maintenance Engineering (AME) or relevant fieldCertification from aviation authorities such as DGCA, FAA, or equivalentValid AME license (preferred)Knowledge of aircraft systems and safety standards Skills RequiredStrong technical and mechanical aptitudeAttention to detail and problem-solving skillsAbility to read technical manuals and diagramsGood communication and teamwork skillsTime management and ability to work under pressure Work EnvironmentAirports, hangars, or maintenance workshopsMay require shift work, weekends, and night dutiesPhysically demanding (standing, lifting, working in confined spaces) Salary Range (India)Fresher: 3 - 5 LPAExperienced: 5 - 15+ LPA

An Aircraft Maintenance Engineer is responsible for inspecting, maintaining, repairing, and ensuring the airworthiness of aircraft systems and components. They ensure that aircraft meet safety regulations and are safe for flight operations by following aviation authority standards.Key ResponsibilitiesInspect aircraft systems, engines, and components before and after flights.Perform routine maintenance, repairs, and overhauls on aircraft.Diagnose mechanical and electrical faults in aircraft systems.Replace or repair defective aircraft parts and components.Ensure compliance with aviation safety standards and regulations.Maintain detailed maintenance records and technical documentation.Conduct troubleshooting on aircraft systems such as engines, landing gear, hydraulics, and avionics.Coordinate with pilots and ground crew regarding aircraft condition and maintenance issues.Test aircraft systems to ensure proper functioning after maintenance.Ensure all work is completed according to aviation authority guidelines.Required SkillsStrong knowledge of aircraft systems and engineering principlesMechanical and technical troubleshooting skillsAttention to detail and safety awarenessProblem-solving abilityAbility to work under pressure and in shiftsGood communication and teamwork skillsEducational QualificationDiploma or Degree in Aircraft Maintenance Engineering (AME) or Aeronautical Engineering.Certification or license from aviation authority (such as DGCA in India).ExperienceFreshers can work as Technicians or Trainees.Experienced engineers may work as Licensed Aircraft Maintenance Engineers.Work EnvironmentAirports and aircraft hangarsAviation maintenance organizationsAirlines and aircraft manufacturing companies

Paramedical Technician responsibilities include:- Assisting healthcare professionals in the diagnosis and treatment of patients- Operating medical equipment and instruments used in diagnostic procedures- Monitoring patients' vital signs and reporting any changes to healthcare team- Providing direct patient care under the supervision of nurses or physicians- Maintaining accurate patient records and ensuring patient confidentiality- Educating patients on self-care techniques and medication administration- Following standard operating procedures for infection control and patient safety

Position OverviewThe Aircraft Mechanic / Aircraft Technician is responsible for performing maintenance, repair, inspection, and modification tasks on aircraft to ensure they are safe, airworthy, and fully operational. The role involves hands-on technical work, strict adherence to aviation regulations, and close coordination with engineers, quality inspectors, and flight crews to support efficient flight operations.Key Responsibilities Aircraft Maintenance & RepairPerform scheduled (A, B, C, D checks) and unscheduled maintenance on aircraft and components.Inspect, troubleshoot, and repair airframes, engines, hydraulic, pneumatic, fuel, and electrical systems.Carry out defect rectification, part replacement, and system testing as per maintenance manuals.Conduct routine inspections and ensure all work meets safety and airworthiness standards.Perform line maintenance and base maintenance activities according to daily operational needs.Support pre-flight and post-flight checks to ensure aircraft readiness. Technical & Diagnostic WorkDiagnose and repair mechanical and electrical malfunctions using testing equipment and manuals.Follow manufacturer and regulatory guidelines for maintenance tasks.Utilize specialized tools, precision instruments, and ground support equipment (GSE).Coordinate with engineers to ensure accurate troubleshooting and defect clearance.Ensure calibration and care of maintenance tools and test instruments. Documentation & ReportingRecord all maintenance activities in job cards, logbooks, and technical documents.Update maintenance tracking systems (e.g., AMOS, Trax, Ramco, or Rusada Envision).Ensure accurate documentation for all inspections, replacements, and modifications.Report component failures, delays, and discrepancies to supervisors or engineering teams.Maintain proper traceability of spares and materials used in maintenance. Safety & ComplianceComply with DGCA / FAA / EASA / CAR-145 safety and maintenance standards.Adhere to company safety management systems (SMS) and quality procedures.Follow proper lockout/tagout and hazardous materials handling procedures.Conduct work in accordance with approved maintenance data and aviation legislation.Ensure Foreign Object Damage (FOD) control and maintain a clean work environment. Team CoordinationWork collaboratively with engineers, quality control inspectors, and flight operations teams.Assist in training junior technicians or apprentices on maintenance practices.Communicate effectively with supervisors regarding progress and issues.Support quick turnaround during AOG (Aircraft on Ground) situations.Required Skills & CompetenciesExcellent technical and mechanical aptitude.Strong problem-solving and troubleshooting skills.Proficiency in using hand tools, torque wrenches, and diagnostic equipment.Sound understanding of aviation maintenance manuals and documentation.High level of attention to detail, accuracy, and discipline.Ability to work under pressure, at heights, and in outdoor conditions.Good communication and teamwork abilities.Educational QualificationDiploma / Degree in Aircraft Maintenance Engineering (AME) or Aeronautical Engineering.Certification from an approved training organization (DGCA / EASA / FAA Part-147).Valid AME license in relevant category (B1 Mechanical / B2 Avionics) preferred.Experience05 years of experience in aircraft maintenance, repair, or overhaul (MRO).Experience on specific aircraft types (e.g., Airbus A320, Boeing 737, ATR, Embraer) is an advantage.Fresher candidates with DGCA-approved AME training may also apply (for trainee roles).Working ConditionsWork performed in hangars, workshops, or ramp areas (day/night shifts).May involve rotational shifts, weekends, and emergency standby duties.Physically demanding role requiring manual handling, climbing, and precision work.

An Electrical Engineer is responsible for designing, developing, and testing electrical systems and equipment. They also oversee the installation and maintenance of electrical systems in buildings, aircraft, and other structures. Responsibilities of an Electrical Engineer may include:- Designing electrical systems and components- Testing and evaluating electrical systems- Troubleshooting and repairing electrical issues- Ensuring compliance with safety standards and regulations- Collaborating with other engineers and professionals on projects- Providing technical support and guidance to team members

We have vacant of 42 Urgent Hiring of Aircraft Maintenance at Airports Jobs in Mumbai, Kolkata, Goa, Visakhapatnam, Trivandrum/Thiruvananthapuram, Kozhikode/Calicut, Chennai, Kannur, Mangalore, Surat, for Freshers Educational Qualification : I.T.I., B.C.A, B.B.A, B.E, B.Tech, Other Bachelor Degree, Post Graduate Diploma, M.Tech, Integrated PG, Any Master Degree Skill Aircraft Maintenance, Aeronautical Engineer, Aviation, Aircraft Engineer, Aircraft Maintenance Engineer, Aircraft Technician, Electrical Engineer, Mechanical Engineer, Civil Engineer, Site Engineer, Project Engineer, Avionics etc.

We have vacant of 47 Jobs for Aeronautical Engineer at Aviation Industry Jobs in Mumbai, Visakhapatnam, Trivandrum/Thiruvananthapuram, Chennai, Vijayawada, Tiruchirappalli/Trichy, Ahmedabad, Imphal, Pune, Jammu, for Freshers Educational Qualification : I.T.I., B.E, B.Tech, Other Bachelor Degree, Post Graduate Diploma, M.Tech, Any Master Degree Skill Aeronautical Engineer, Aeronautical Analyst, Aeronautical, Aircraft Maintenance, Aircraft Maintenance Engineer, Aircraft Engineer, Electrical Engineer, Site Engineer, Mechanical Engineer, Aerospace Engineering, Aircraft Technician, Aircraft Mechanic etc.

Hiring for 25 Aircraft Maintenance Technician Jobs in Bangalore, Ahmedabad, Hyderabad, Mumbai, Kolkata, Kadapa, Mangalore, Madurai, for Freshers,Required Educational Qualification is : Higher Secondary, Secondary School, I.T.I., B.C.A, Bachelor of Hotel Management, B.Sc, B.E, B.Tech, Other Bachelor Degree, Post Graduate Diploma with Good knowledge in Aircraft, Aircraft Maintenance Engineer, Aircraft Maintenance Technician, Aircraft Handling, Aircraft Servicing, Aircraft Engineer, Aircraft Mechanic, Aircraft Technician, Mechanical Engineer, Electrical Engineer, Electronics Maintenance, technician, IT Support etc.

Aircraft Engineer Responsibilities:1. Design and develop aircraft components and systems using CAD software2. Conduct aircraft maintenance and repair tasks to ensure safe and efficient operation3. Perform engineering calculations and analysis to troubleshoot and resolve issues4. Collaborate with avionics technicians to integrate electrical and electronic systems5. Manage engineering tasks within project timelines and budget constraints6. Inspect and test aircraft systems to ensure compliance with regulatory standards

As an Aircraft Maintenance Engineer, your responsibilities will include conducting avionics and structural repairs, performing engine overhauls, troubleshooting aircraft systems, and ensuring the safe and efficient operation of aircraft. You will need to have strong technical ability, safety awareness, and excellent communication skills. Key skills required for this position include analytical thinking, problem-solving abilities, and proficiency with diagnostic equipment. You must also have a thorough understanding of aircraft systems and be able to effectively repair and maintain them.

Responsibilities:1. Providing technical advice regarding design, construction, or program modifications and structural repairs.2. Managing and overseeing construction projects from start to finish.3. Ensuring that projects are completed within budget and on time.4. Conducting regular site visits to monitor progress and quality of work.5. Collaborating with architects and other professionals to ensure that projects meet specifications.6. Ensuring compliance with safety regulations and quality standards.

Job SummaryThe Aircraft Maintenance Technician is responsible for inspecting, maintaining, troubleshooting, and repairing aircraft systems and components to ensure airworthiness, safety, and compliance with aviation regulations. The role requires strict adherence to maintenance procedures, safety standards, and accurate documentation. Key ResponsibilitiesPerform scheduled and unscheduled aircraft maintenance and inspectionsCarry out repair, replacement, and servicing of aircraft componentsTroubleshoot mechanical, electrical, and avionics issuesRead and interpret Aircraft Maintenance Manuals (AMM), IPC, SRMEnsure compliance with aviation safety standards and regulatory requirementsConduct pre-flight, transit, and post-flight checksUse appropriate tools, equipment, and diagnostic instrumentsMaintain accurate technical records and logbooksFollow SMS and Human Factors guidelinesCoordinate with engineers, supervisors, and quality teams Required Skills & CompetenciesStrong knowledge of aircraft systems (airframe, engine, avionics)Mechanical and technical troubleshooting skillsHigh level of attention to detailAbility to work under pressure and meet deadlinesGood communication and teamwork skillsFamiliarity with maintenance documentation systems (preferred) Education & QualificationAME / AMT course from an approved aviation instituteValid certification as per regulatory authority (where applicable)Type-rating on aircraft (preferred for experienced candidates)Freshers with strong technical fundamentals may apply Physical & Work RequirementsWillingness to work rotational shifts, nights, weekendsAbility to work in hangars, ramps, confined spacesPhysically fit to work at heights and outdoor conditions Safety & ComplianceStrict adherence to aviation safety regulationsProper use of PPE and safety equipmentImmediate reporting of safety hazards or defects

Job SummaryThe Avionics Engineer is responsible for the design, development, testing, installation, and maintenance of aircraft electronic systems. This role ensures safe, efficient, and compliant operation of avionics equipment including communication, navigation, surveillance, and flight control systems. The engineer works closely with cross-functional teams to support system integration, troubleshooting, upgrades, and continuous improvement in aviation technology. Key ResponsibilitiesDesign & Development:Design, develop, and integrate avionics systems for aircraft and aerospace applications.Create system schematics, wiring diagrams, and interface control documents.Develop embedded software or hardware for avionics components.Testing & Troubleshooting:Conduct system testing, validation, calibration, and verification to ensure performance standards.Diagnose issues in avionics equipment using testing tools and propose corrective actions.Perform root cause analysis for system failures and implement preventive measures.Installation & Integration:Oversee installation and configuration of avionics systems in aircraft.Ensure seamless integration of avionics with electrical, mechanical, and flight control systems.Coordinate with manufacturing, maintenance, and flight operations teams for system implementation.Compliance & Documentation:Ensure compliance with aviation authorities (FAA, EASA, DGCA) and safety standards.Prepare technical reports, maintenance manuals, and certification documentation.Maintain accurate documentation of design changes, test results, and system configuration.Maintenance & Support:Support maintenance teams in periodic inspections, upgrades, repairs, and system checks.Provide engineering support for aircraft modifications, retrofits, and new product introductions. Required Skills & CompetenciesTechnical Skills:Strong knowledge of communication, navigation, surveillance, autopilot, and flight control systems.Expertise in embedded systems, digital/analog electronics, and circuit design.Hands-on experience with avionics protocols (e.g., ARINC 429, MIL-STD-1553, CAN bus).Proficiency in tools such as MATLAB/Simulink, LabVIEW, PSPICE, Altium, Xilinx, or similar.Knowledge of aviation standards DO-178C, DO-254, RTCA, FAA/EASA guidelines.Soft Skills:Analytical and problem-solving ability with strong attention to detail.Effective communication, teamwork, documentation, and time-management skills.Ability to work under pressure and meet strict deadlines. Education & Experience RequirementsBachelors degree in Avionics Engineering, Aerospace Engineering, Electronics & Communication, Electrical Engineering, or related field.(Preferred) Masters degree in Avionics or related specialization.Experience:Entry Level: 02 yearsMid-Level: 37 yearsSenior: 8+ years in avionics engineering or related aerospace domain Work EnvironmentMay require working in aircraft hangars, manufacturing facilities, laboratories, or test sites.Willingness to travel for project support, testing, and system installation.Must adhere to aviation safety regulations and workplace safety protocols. Job Type & CompensationFull-time / PermanentCompetitive salary based on experience and qualificationsBenefits: Health insurance, travel allowance, training & professional development

Position Summary:The Aeronautical Engineer is responsible for the design, development, testing, and maintenance of aircraft and aerospace systems. The role focuses on improving flight safety, efficiency, and performance while ensuring compliance with aviation standards and regulations. The engineer works closely with design, testing, and manufacturing teams to deliver innovative and reliable aerospace solutions.Key Responsibilities: Design & DevelopmentDesign and develop aircraft components, structures, and systems.Use CAD/CAM software (CATIA, SolidWorks, AutoCAD, etc.) for 2D/3D modeling.Analyze aerodynamic, structural, and propulsion systems to optimize performance.Conduct feasibility studies for new design concepts and prototypes.Collaborate with cross-functional teams on product development and testing. Testing & AnalysisPerform wind tunnel tests, flight simulations, and performance evaluations.Analyze test results to identify design flaws or areas of improvement.Conduct structural and fatigue analysis using tools like ANSYS or MATLAB.Ensure designs meet safety, quality, and regulatory standards (DGCA, FAA, EASA). Production & MaintenanceSupport the manufacturing process by providing technical input and design validation.Assist in maintenance planning, fault diagnosis, and repair of aircraft systems.Evaluate materials and production methods for efficiency and durability. Documentation & CompliancePrepare technical reports, test documentation, and certification papers.Ensure compliance with aviation standards and environmental regulations.Maintain accurate records of design modifications, testing, and approvals. Innovation & ResearchResearch emerging aerospace technologies and materials.Contribute to projects related to UAVs, satellites, or space vehicles.Suggest improvements for existing aircraft systems and components.Skills & Competencies:Strong understanding of aerodynamics, propulsion, and flight mechanicsProficiency in CAD/CAE software (CATIA, ANSYS, MATLAB, SolidWorks)Knowledge of CFD and FEA toolsExcellent problem-solving and analytical skillsGood technical documentation and communication abilitiesTeam collaboration and project management skillsAwareness of aviation safety regulations and standardsQualifications:Education: B.E./B.Tech (M.E./M.Tech preferred)Experience: 05 years (entry-level to mid-level); internship or industry experience preferredCertifications (optional): CATIA, ANSYS, MATLAB, or DGCA-approved trainingWork Environment:Office and lab-based work with occasional visits to test sites or manufacturing unitsCollaboration with design, testing, and maintenance teamsMay involve travel for inspections, trials, or client meetingsJob Titles / Related Roles:Aerospace EngineerAircraft Design EngineerFlight Test EngineerMaintenance Engineer (Aviation)Propulsion Engineer

- Conduct medical tests and assist healthcare professionals: As a Paramedical Technician, you will be responsible for conducting various medical tests as instructed by healthcare professionals. You will also assist doctors and nurses in patient care.- Handle medical equipment and instruments: You will be required to handle and operate medical equipment and instruments safely and efficiently. This includes maintaining and sterilizing the equipment as needed.- Maintain accurate medical records: It is essential to accurately record and maintain patient information, test results, and other medical data. This information is crucial for patient care and treatment plans.- Provide patient support and education: As a Paramedical Technician, you will interact with patients on a regular basis. Providing support, information, and education to patients regarding their health conditions and treatments is an important part of the role.- Follow medical protocols and guidelines: You should adhere to all medical protocols, guidelines, and safety standards while performing your duties. This ensures the safety and well-being of patients and healthcare professionals.Required skills and expectations:- Bachelor's degree in Pharmacy, Biology, or related field- Strong communication and interpersonal skills- Ability to work effectively in a team environment- Attention to detail and accuracy in work- Knowledge of medical terminology and procedures- Ability to prioritize tasks and manage time efficiently.

Key Responsibilities:1. Perform routine medical procedures: As a Paramedical Technician, you will be responsible for conducting routine medical procedures under the supervision of healthcare professionals to assist in patient care.2. Monitor patient vital signs: You will be required to monitor and record vital signs such as blood pressure, heart rate, and temperature of patients to ensure their well-being during treatment.3. Assist in emergencies: In case of medical emergencies, you will be expected to provide immediate assistance to healthcare professionals and patients by following established protocols and procedures.4. Maintain medical equipment: It will be part of your job to ensure that medical equipment is properly maintained, cleaned, and sterilized to guarantee the safety of patients and staff.5. Communicate with healthcare team: You will need to effectively communicate and collaborate with other members of the healthcare team to provide comprehensive patient care and update on patient status.Required Skills and Expectations:1. Education in Life Sciences or related field: A degree in BDS, B.Pharma, B.Sc, B.E, BVSC or related field is required to qualify for this position.2. Attention to detail: The ability to pay close attention to detail is essential to accurately perform medical procedures and monitor patient vitals.3. Strong communication skills: Good communication skills are necessary to effectively interact with patients and healthcare professionals.4. Ability to work in a team: You should be able to work collaboratively with other healthcare team members to ensure the best possible patient care.5. Willingness to learn and adapt: The healthcare field is constantly evolving, so a willingness to learn new techniques and adapt to changes is important for this role.

Key Responsibilities:1. Assist in the assessment and treatment of patients - As a Paramedical Technician, you will work under the supervision of medical professionals to help assess and treat patients in various healthcare settings.2. Perform diagnostic tests and procedures - You will be responsible for operating medical equipment and performing diagnostic tests as instructed by the healthcare team.3. Administer medications and treatments - You will assist in administering medications and treatments to patients according to the prescribed guidelines.4. Maintain patient records and documentation - It is essential to accurately record patient information, treatment plans, and progress to ensure proper patient care.5. Provide support to healthcare team - You will collaborate with nurses, physicians, and other healthcare professionals to provide comprehensive care to patients.Required Skills and Expectations:1. Educational background in a related field - Candidates with a degree in Life Sciences, Pharmacy, Nursing, or related disciplines are preferred for this role.2. Strong communication skills - Ability to communicate effectively with patients and the healthcare team is crucial in this role.3. Attention to detail - Precision in performing diagnostic tests, administering treatments, and maintaining accurate patient records is essential.4. Ability to work under pressure - The role may involve handling emergencies and working in fast-paced healthcare environments, requiring the ability to stay calm and focused.5. Willingness to learn and adapt - As a Paramedical Technician, you should be open to learning new procedures and technologies to provide the best possible care to patients.