120

System Maintenance Engineer Jobs

Filters

  • 5 - 10 yrs
  • 6.5 Lac/Yr
  • Pune
Mechanical Systems Electrical Systems Analytical Thinking Diagnostic Tools Installation Project Management Technical Documentation Testing Procedures Repair Techniques Field Service Equipment Maintenance
Job Profile & Key Responsibilities:-A Service Engineer at Calitron Calibration Laboratory (OPC) Pvt. Ltd. is responsible for the installation, maintenance, testing, and field or lab calibration of electrical, electronics, mechanical, thermal, and flow instrumentation. On-Site & In-Lab Service: Handle both internal lab duties in Bhosari, Pune, and field-based service visits to customer sites for equipment inspection and maintenance (travel within city/country as required). Installation & Troubleshooting: Install, diagnose, and troubleshoot industrial test and measurement equipment. Documentation & Compliance: Maintain calibration certificates, service reports, logbooks, and trace measurement data accurately to ensure regulatory compliance. Customer Support: Coordinate with clients for equipment servicing, technical queries, and turnaround support.
View all details

CCTV Technician (Male)

Ambika Technologies Pvt Ltd

  • 2 - 5 yrs
  • 3.8 Lac/Yr
  • Mowa Raipur
Chip Level Repairing CCTV Maintenance Hardware Repair Chip Level Engineer Networking CCTV System
We are looking for a motivated CCTV Technician to join our team in Mowa, Raipur. The ideal candidate will have 2 to 5 years of experience in CCTV chip level Repairing and maintenance, along with an I.T.I. qualification. This is a full-time position that requires working from the office.
View all details

Hiring Electrical Engineer For Padra Vadodara

Lonsen Kiri Chemical Ind. Ltd.

  • 8 - 12 yrs
  • Padra Vadodara
Power System Engineer Industrial Automation SCADA PLC Electrical Maintenance Breakdown Maintenance VFD Drives DG Sets Preventive Maintenance
Job Profile:Summary: Required Of Eng. Electrical with an education in Min. BE Electrical with experience of 8 to 12 years in Dyes & Intermediate or Chemical Industry. Job Responsibilities: 1) Develop, and maintain electrical systems for production and utility areas within the chemical plant.2) Ensure all electrical installations and modifications comply with safety standards, codes, and regulations (e.g., NEC, IEC, OSHA, ATEX).3) Troubleshoot and resolve electrical issues in process equipment, including motors, drives, control panels, and instrumentation.4) Compulsory knowledge of VFD. Support PLC and DCS systems used in process automation.5) Coordinate with maintenance, instrumentation, and process engineering teams to optimize equipment performance. 6) Knowledge of Electrical technical specifications for electrical equipment. 7) Conduct regular preventive maintenance and predictive diagnostics on electrical systems.8) Lead or participate in electrical projects including upgrades, expansions, and energy efficiency improvements. 9) Operations of DG Sets. Maintain ace of MCC and PCC Panels. 10) Maintain up-to-date documentation including wiring diagrams, control logic, and power distribution layouts.11) Ensure safe work practices and participate in safety audits and HAZOP reviews. Employee Benefits: PF, Gratuity, Bonus, Free Transportation, Free Canteen, Mediclaim (For full Family), Referral Benefits.
View all details

Looking For Maintenance Engineer

Cadila Pharmaceuticals Limited

  • 5 - 8 yrs
  • 4.0 Lac/Yr
  • Udaipur
Lyophilizer Operator Filling Injectables Automatic Loading Unloading System Autoclaves
The person should have working Hands on experience in Preventive and breakdown maintenance of critical process & lab equipment of Injectable, including the lyophilizer with Automatic Loading Unloading System IMA , Vial filling line(including Washing,Tunnel,Sealing) IMA, Manufacturing vessels, CIP/SIP Systems, Passboxes, LAF, Autoclaves (fedegari & machine Fabrik), Automatic visual inspection machines ( brevetti), Automatic leak-test machines (Bonfigloi), Automatic labeling machines, Automatic cartonator ACG , Stability chambers Thermolab, Cold rooms Thermolab & blue star, and other associated process & Lab equipments.He should be well versed with GMP environment & Documentation.
View all details

Get Personalized Job Matches

Based on your experience, skills, interests, and career goals to help you find the most relevant opportunities faster. Register Now!
  • Fresher
  • 2.0 Lac/Yr
  • Chennai
CCTV Operator CCTV Technician CCTV Engineer CCTV System CCTV Maintenance CCTV Installation Security Consultant
We are seeking a dedicated CCTV Operator to monitor and maintain security systems in our office in Chennai. This is a full-time position suitable for freshers who have completed their 12th grade.nnKey Responsibilities: n- Monitor Surveillance Footage: Continuously observe live video feeds from CCTV cameras to ensure safety and security within the premises. n- Report Incidents: Quickly identify and report any suspicious activities or incidents to the relevant authorities to ensure a prompt response. n- Maintain Equipment: Regularly check and maintain CCTV equipment to ensure it is functioning properly and report any technical issues. n- Collaborate with Security Team: Work closely with the security team to develop effective monitoring strategies and assist in investigations when required. nnRequired Skills and Expectations: nCandidates should have a keen eye for detail and the ability to make quick decisions based on visual information. Good communication skills are essential for reporting incidents clearly and accurately. Familiarity with CCTV systems and basic troubleshooting is preferred, though not mandatory. Additionally, a sense of responsibility and commitment to maintaining safety standards is essential for this role. A willingness to learn and adapt in a fast-paced environment will be highly regarded.
View all details
  • 0 - 6 yrs
  • 15.0 Lac/Yr
  • Visakhapatnam
Aircraft Maintenance Aircraft Technician Aircraft Mechanic Aircraft Engineer Aircraft Maintenance Engineer Aircraft Supervisor Knowledge Of Aircraft Systems Mechanical Aptitude Preventive & Corrective Maintenance Aviation Safety Protocols Knowledge Of Avionics Systems Communication Time Management
Job SummaryThe Aircraft Maintenance Technician is responsible for inspecting, maintaining, troubleshooting, and repairing aircraft systems and components to ensure airworthiness, safety, and compliance with aviation regulations. The role requires strict adherence to maintenance procedures, safety standards, and accurate documentation. Key ResponsibilitiesPerform scheduled and unscheduled aircraft maintenance and inspectionsCarry out repair, replacement, and servicing of aircraft componentsTroubleshoot mechanical, electrical, and avionics issuesRead and interpret Aircraft Maintenance Manuals (AMM), IPC, SRMEnsure compliance with aviation safety standards and regulatory requirementsConduct pre-flight, transit, and post-flight checksUse appropriate tools, equipment, and diagnostic instrumentsMaintain accurate technical records and logbooksFollow SMS and Human Factors guidelinesCoordinate with engineers, supervisors, and quality teams Required Skills & CompetenciesStrong knowledge of aircraft systems (airframe, engine, avionics)Mechanical and technical troubleshooting skillsHigh level of attention to detailAbility to work under pressure and meet deadlinesGood communication and teamwork skillsFamiliarity with maintenance documentation systems (preferred) Education & QualificationAME / AMT course from an approved aviation instituteValid certification as per regulatory authority (where applicable)Type-rating on aircraft (preferred for experienced candidates)Freshers with strong technical fundamentals may apply Physical & Work RequirementsWillingness to work rotational shifts, nights, weekendsAbility to work in hangars, ramps, confined spacesPhysically fit to work at heights and outdoor conditions Safety & ComplianceStrict adherence to aviation safety regulationsProper use of PPE and safety equipmentImmediate reporting of safety hazards or defects
View all details
  • 0 - 1 yrs
  • 2.0 Lac/Yr
  • Rajkot
Electrical Systems Analytical Thinking Project Management Technical Documentation Team Collaboration Problem Solving Risk Assessment Troubleshooting Electrical Engineer
Conduct regular inspections and preventive maintenance of solar power systems. Monitor system performance and efficiency using SCADA systems and other monitoring tools. Identify and troubleshoot issues to minimize downtime and optimize system performance. Schedule and perform corrective maintenance as required. Diagnose and resolve technical issues related to solar panels, inverters, wiring, and other system components. Coordinate with technical support teams and manufacturers for advanced troubleshooting. Ensure timely resolution of faults and restoration of system functionality. Ensure all operations and maintenance activities comply with relevant safety, environmental, and industry standards. Implement and adhere to safety protocols and procedures to maintain a safe working environment. Maintain accurate records of maintenance activities, system performance, and repairs. Generate regular reports on system status, performance metrics, and maintenance activities. Document and report any incidents or accidents in accordance with company policies.
View all details
  • 6 - 9 yrs
  • Pune
Industrial Automation Service Engineering PLC HMI VFD Servo SCADA Sensors Control Systems Electrical Troubleshooting Installation Commissioning Preventive Maintenance Field Service Customer Support
Service Engineer - Automation Industrial AutomationExperience: 6-9 YearsLocation: PuneHiring Company: Talent Zone ConsultantBrief JD:We are hiring a Service Engineer - Automation with strong experience in industrial automation equipment and control systems. The role involves installation, commissioning, troubleshooting, preventive maintenance and providing technical support to customers at site.Key Responsibilities:Install, commission and service automation systems.Troubleshoot PLC, HMI, VFD, servo and control system issues.Conduct preventive and corrective maintenance.Provide onsite technical support and resolve customer issues.Coordinate with engineering and project teams.Prepare service reports and technical documentation.Travel to customer sites as required.Relevant Skillset:Industrial Automation, Service Engineering, PLC, HMI, VFD, Servo, SCADA, Sensors, Control Systems, Electrical Troubleshooting, Installation, Commissioning, Preventive Maintenance, Field Service, Customer Support
View all details
  • 0 - 2 yrs
  • 2.0 Lac/Yr
  • Bhubaneswar
CCTV Engineer CCTV System CCTV Maintenance Computer Networking CCTV Skills Access Control System Field Service Biometrics CCTV Installation Fire Alarm System
As a CCTV Engineer, you will be responsible for setting up, wiring, configuring, and troubleshooting surveillance systems. This role requires you to work from the office in Bhubaneswar, India, and is suitable for candidates with up to two years of experience.Key responsibilities include handling the physical installation of CCTV systems, ensuring the correct wiring connections, and configuring the cameras for optimal performance. You will also troubleshoot any issues in the surveillance systems to ensure continuous operation. To excel in this position, you must possess strong technical skills related to CCTV installation and troubleshooting. Familiarity with electrical systems and wiring protocols is essential. Attention to detail is crucial, as you will be responsible for ensuring the quality and reliability of the surveillance systems. Good communication skills will aid in collaborating with team members and clients effectively. Physical fitness may be required, as the job might involve moving equipment and working in varied positions. You should be able to travel within the region for installations and repairs. Professional certification in surveillance system installation will be an advantage, but not mandatory. This full-time position requires a male candidate who has completed at least a 12th-grade education. Working hours will follow a standard office schedule, with specified days off.
View all details
  • 1 - 3 yrs
  • 2.5 Lac/Yr
  • Nashik
Blueprint Reading Computer Diagnostics Electrical Repair Equipment Calibration Facility Repairs HVAC Systems Hydraulic Systems Mechanical Troubleshooting Plumbing Repairs Pneumatic Systems
As a Field Maintenance Engineer, you will play a crucial role in ensuring the smooth operation of equipment and systems in various locations. Your primary responsibilities will include:- Conducting Routine Maintenance: You will perform regular maintenance checks on machinery and equipment to prevent malfunctions and ensure optimal performance. - Troubleshooting Issues: When problems arise, you will identify and analyze the root cause of the issues to find effective solutions quickly.- Repairing Equipment: You will be responsible for repairing faulty equipment, which may involve replacing parts, fixing electrical systems, or recalibrating machinery.- Documenting Work: It's essential to keep detailed records of repairs, maintenance schedules, and any parts used, as this helps in future troubleshooting and planning.- Customer Interaction: You will communicate with clients to understand their needs and provide technical support, ensuring they are satisfied with the service provided.- Staying Updated on Technology: You will keep yourself informed about the latest tools and technologies in the field to improve efficiency and service quality.To excel in this role, you should have a solid background in mechanical or electrical systems. Good problem-solving skills are crucial, along with the ability to work independently and as part of a team. Effective communication is essential for interacting with clients and team members. A strong attention to detail will ensure that tasks are completed accurately and safely.
View all details

Urgent Requirement For AV Engineer

Technicom Engineers Network

  • 3 - 5 yrs
  • 3.5 Lac/Yr
  • Sukhdev Vihar Delhi
System Troubleshooting Audiovisual Systems Control Systems Hardware Configuration Programming Maintenance Technical Support AV Equipment Setup Software Integration Video Conferencing Troubleshooting Cabling Calibration Installation
We are seeking an experienced AV Engineer to join our team in Sukhdev Vihar, Delhi. The ideal candidate will have 3-5 years of experience in audio-visual systems, bringing expertise to provide high-quality support and solutions for various AV projects.Key Responsibilities:1. Installation and Setup: You will be responsible for setting up and configuring audio-visual equipment, including projectors, microphones, speakers, and video conferencing systems, ensuring everything is functioning properly.2. Maintenance and Troubleshooting: Regular maintenance of AV systems is crucial. You will identify and resolve technical issues promptly to minimize downtime and ensure smooth operations for all users.3. Collaboration with Teams: Work closely with project managers, IT staff, and other team members to understand AV requirements for events and installations, providing input on the best equipment and solutions.4. User Training: You will conduct training sessions for users, helping them understand how to operate AV systems effectively and troubleshoot minor issues on their own.5. Documentation: Create and maintain detailed documentation of AV setups, including equipment lists and maintenance logs, to ensure consistency and efficiency for future projects.Required Skills and Expectations:Candidates should hold a graduate degree and have strong knowledge of AV technology and systems. Excellent problem-solving skills and the ability to work collaboratively in a team environment are essential. Effective communication skills will help in training users and coordinating with team members. A customer-focused approach and attention to detail are expected to deliver high-quality service consistently.
View all details
  • 1 - 5 yrs
  • 8.5 Lac/Yr
  • Hyderabad
Control Systems Automation Protocols Data Acquisition Electrical Testing Electrical Troubleshooting Panel Design PID Control SCADA Systems Instrumentation Electrical Design PLC Programming Process Automation Safety Systems HMI Development Machine Vision Maintenance Planning
Job Description:We are seeking a electrical automation engineer for our product development department, the ideal candidate should have hands on experience in designing and developing electrical systems like component selection, control panel, testing and product validation that form the foundation of physical automation machinery.Key Responsibilities:Design and develop electrical systems, wiring diagrams and control schematics for the product.Knowledge of electrical components such as contractors,relays,mcbs,sensors, Plc,HMI systems.Knowledge of load calculations and size of cable, single line drawing on AutoCAD.Hands of experience on beckhoff software for PLC programming.Hands of experience on software programming, testing, integration and troubleshooting process also.Candidates from product based company or Automation company are eligible.Btech - Electrical candidates, Immediate joiners are given preference.
View all details
  • 1 - 5 yrs
  • Jammu
CCTV Installation CCTV Skills CCTV Maintenance CCTV System
As a CCTV Engineer located in Jammu, you will be responsible for installing, maintaining, and repairing CCTV systems to ensure optimal security for various clients. Your main tasks will include:- Installation of CCTV Systems: You will set up cameras, recorders, and other equipment as per specifications to ensure comprehensive surveillance coverage.- Maintenance and Repair: Regularly check and troubleshoot existing systems to maintain functionality and repair any faults to minimize downtime.- Configuration and Programming: Configure cameras and software, ensuring that all systems are operating according to client specifications and industry standards.- Site Assessments: Conduct site visits to analyze and recommend the best camera placement and equipment needed to meet security requirements.- Documentation and Reporting: Maintain records of installations, repairs, and maintenance work performed for accountability and future reference.- Client Interaction: Communicate effectively with clients to understand their security needs and provide training on the use of CCTV systems.You should have an educational background in I.T.I. with 1 to 5 years of experience in a similar role. Candidates must demonstrate a strong technical understanding of CCTV systems and be able to work with limited supervision. Effective problem-solving skills, attention to detail, and good communication skills are essential. Being physically fit and able to handle technical equipment safely is also important. As the role is full-time and office-based, a commitment to regular working hours is expected.
View all details

Utility Engineer - Bharuch Gujarat

Capital Placement Services

  • 5 - 11 yrs
  • 8.0 Lac/Yr
  • Bharuch
Steam Boiler Operation Air Compressor Maintenance HVAC & AHU Systems Fire Fighting System Hydropneumatic Systems Preventive Maintenance Contractor Management
We are seeking a skilled Utility Engineer to join our team in Bharuch. The ideal candidate will have 5 to 11 years of experience and a Bachelor of Engineering degree. This full-time position requires working from the office and is open to male applicants only.Key Responsibilities:- Utility Management: Oversee the operation and maintenance of utility systems, including water, electricity, and compressed air, ensuring they run efficiently and reliably.- System Optimization: Analyze current utility systems and suggest improvements aimed at reducing operational costs and increasing efficiency and reliability.- Compliance Monitoring: Ensure all utility operations comply with local regulations and safety standards to maintain a safe working environment.- Troubleshooting and Repair: Respond to utility-related issues, diagnosing problems quickly, and implementing effective solutions.- Project Coordination: Work with cross-functional teams to implement utility-related projects, ensuring they are completed on time and within budget.- Data Analysis and Reporting: Monitor utility consumption data and prepare reports for management, identifying trends and making recommendations based on findings.Required Skills and Expectations:Candidates should possess strong technical knowledge of utility systems and engineering principles. Excellent problem-solving skills and the ability to work under pressure are essential. Effective communication and project management skills are crucial to coordinate with various teams effectively. Proficiency in data analysis tools will be advantageous, as well as a commitment to safety and regulatory compliance. A proactive attitude and the ability to adapt to changing situations are also expected.
View all details

Hiring For Information Technology Engineer

TDS Placements and Services Private Limited

  • 4 - 9 yrs
  • 4.0 Lac/Yr
  • Haridwar
Information Technology Computer Hardware Hardware Networking Computer Networking Problem Solving PC Maintenance Troubleshooting System Testing
We are seeking an experienced Information Technology Engineer to join our team in Haridwar. The ideal candidate will have 4 to 9 years of relevant experience and will work in our office environment.Key Responsibilities:- System Maintenance and Support: Ensure all IT systems run smoothly by performing regular maintenance checks and providing technical support to users.- Network Management: Monitor and manage the organization's network to ensure secure and efficient communication and data transfer.- Software Installation and Configuration: Install, configure, and upgrade software applications to meet the needs of the organization and enhance overall productivity.- Troubleshooting: Identify and resolve hardware and software issues quickly to minimize downtime and disruptions for users.- Documentation: Maintain clear documentation of IT processes, system configurations, and troubleshooting guides for future reference.- Collaboration: Work closely with other IT team members and departments to design and implement technology solutions that improve operational efficiency.Required Skills and Expectations:Candidates must have a strong understanding of IT systems, networks, and security. Proficiency in troubleshooting and problem-solving is essential. A solid background in software installation and configuration is expected. The candidate should possess excellent communication skills to effectively assist users and collaborate with team members. A Bachelor's degree in Computer Science or a related field is preferred. The role requires a male candidate who is able to work full-time in an office setting.
View all details

Fire Alarm Engineer - Bangalore

Sreesha Fire and safety

  • 1 - 2 yrs
  • 3.0 Lac/Yr
  • Bangalore
Alarm Panel Programming Problem-solving System Maintenance Fire Alarm Systems Fire Protection Equipment Troubleshooting Electrical Wiring Emergency Response Communication Skills Safety Protocols Testing Procedures Analytical Thinking
1. Should have knowledge of Fire Alarm System Conventional and Addressable System Types.2. Should have knowledge of Fire Alarm System, PA System and CCTV System Installing , Troubleshooting , Testing & Operation.3. Should be responsible of maintenance in Fire Detection Systems.4. Should have Knowledge of materials, methods, and the tools involved in installation, maintenance, and repair of fire alarm, PA, Access and suppression systems and equipment.
View all details
  • 3 - 9 yrs
  • 6.5 Lac/Yr
  • Panjim Goa
Estimation & Billing Engineer Electrical Engineering Project Management Testing and Commissioning Civil Designer Substation Design Civil Works Arc Flash Analysis Equipment Specification Control Systems High Voltage Grounding Systems Transformer Power Systems Protection Systems Relay Settings Substation Design Regulatory Compliance Switchgear Emergency Response Maintenance Planning Fault Analysis SCADA Substation Automation
As a Substation Engineer in Panjim Goa, India, you will be responsible for designing, operating, and maintaining electrical substations. This role requires 3 to 9 years of experience and a graduate degree in a relevant field and Bhadanis Institute Substation Training Certificate or Nicmar or Rics preferable.Key responsibilities include:1. Design and Planning: Create detailed plans for new substations, ensuring they meet all safety and operational standards.2. System Analysis: Evaluate existing substation systems, conduct load flow studies, and identify areas for improvement or upgrades.3. Equipment Installation: Oversee the installation, testing, and commissioning of substation equipment, ensuring everything functions correctly and efficiently.4. Maintenance Coordination: Schedule and conduct regular maintenance checks, troubleshooting equipment issues to minimize downtime and ensure reliable service.5. Project Management: Manage projects from conception to execution, coordinating with contractors and ensuring deadlines and budgets are met.6. Compliance Management: Ensure all operations comply with regulatory standards and best practices, keeping up with changes in industry regulations.7. Bhadanis Trained Engineers or Rics or Nicmar PreferableRequired skills and expectations include strong analytical abilities to assess system performance and resolve issues effectively. You should possess excellent communication skills for collaboration with team members and clients. A proactive approach to problem-solving and a commitment to safety are essential. Familiarity with industry software and tools is also expected, along with the ability to work independently while contributing positively to a team environment.
View all details

Urgent Requirement For BMS Engineer

Technicom Engineers Network

  • 2 - 5 yrs
  • Sukhdev Vihar Delhi
Building Automation Alarm Management Commissioning Control Systems Fault Diagnosis HVAC Systems Electrical Systems System Integration Sensor Calibration Maintenance Troubleshooting Energy Management Technical Documentation
Job DescriptionTechnicom Engineers Network is looking for a motivated and technically skilled BMS Engineer to join our team. The candidate will be responsible for the installation, testing, commissioning, operation, troubleshooting and maintenance of Building Management System (BMS) and Building Automation Systems at various projects.Key Responsibilities* Install, configure, test and commission BMS and building automation systems.* Monitor and troubleshoot BMS-related issues at project sites.* Work with HVAC control systems and associated field devices.* Handle BMS controllers, sensors, actuators, panels and related equipment.* Perform system integration and communication testing.* Work with communication protocols such as BACnet, Modbus and other relevant protocols.* Coordinate with project, electrical, HVAC and other technical teams during installation and commissioning.* Carry out preventive maintenance, fault finding and corrective actions.* Prepare and maintain site reports, testing/commissioning records and other technical documentation.* Support project execution and ensure work is completed according to required quality and safety standards.* Travel to project sites as required.Required Skills* Good understanding of BMS / Building Automation Systems.* Knowledge of HVAC controls.* Basic knowledge of DDC / PLC / SCADA will be an advantage.* Knowledge of BACnet / Modbus is preferred.* Ability to troubleshoot electrical/control-system-related issues.* Good communication and coordination skills.* Willingness to work at project sites.
View all details

Mechanical Maintenance Engineer For Europe

Flight2sucess Immigration Llp

Preventive Maintenance Corrective Maintenance Mechanical Troubleshooting Equipment Maintenance & Repair Predictive Maintenance Hydraulic & Pneumatic Systems Maintenance Planning & Scheduling Safety Compliance & Risk Assessment Technical Documentation & Reporting Rotating Equipment Maintenance Industrial Machinery Plant Maintenance Reliability Engineering Condition Monitoring Mechanical Systems Breakdown Analysis Spare Parts Management Lean Maintenance Continuous Improvement
Major Responsibilities Planned and executed preventive and corrective maintenance activities for mechanical equipment.Diagnosed mechanical faults and performed troubleshooting to minimize downtime.Inspected, repaired, and maintained industrial machinery and plant equipment.Monitored equipment performance and implemented reliability improvement measures.Conducted root cause analysis (RCA) of equipment failures and breakdowns.Managed maintenance schedules, work orders, and technical documentation.Supervised installation, commissioning, and testing of mechanical systems.Maintained hydraulic, pneumatic, pumps, compressors, and rotating equipment.Ensured compliance with safety, environmental, and quality standards.Coordinated with production and engineering teams to ensure smooth operations.Managed spare parts inventory and maintenance resources effectively.Supported continuous improvement initiatives to enhance equipment efficiency and productivity.
View all details
Mechanical Design AutoCAD Mechanical BE Mechanical Diploma Mechanical Diploma Mechanical Engineer Quality Engineering Design Engineer Production Engineer Process Engineer Maintenance Engineer Quality Control Engineer Project Engineer System Engineer Instrument & Control Engineer Power Plant Engineer Hvac Engineer
We are seeking a Mechanical Engineer to join our team in Canada. This role requires a hands-on approach and a passion for engineering principles. If you are a recent graduate or have up to six years of experience, we encourage you to apply.Key Responsibilities:- Design and Development: Create and analyze mechanical systems and components using design software to ensure they meet specifications and standards.- Testing and Evaluation: Conduct tests on prototypes to evaluate their performance and reliability, making adjustments as needed to improve functionality.- Collaboration: Work closely with other engineers and team members to solve design problems and optimize product performance, ensuring effective communication throughout the project.- Documentation: Maintain detailed records of designs, modifications, test results, and reports to support project tracking and compliance.- Project Support: Assist in project management tasks, including timelines and resource allocation, to ensure projects are completed on time and within budget.Required Skills and Expectations:Candidates should have a strong understanding of mechanical engineering principles acquired through education or experience. Proficiency in design software such as SolidWorks or AutoCAD is essential for creating accurate models. Effective problem-solving skills and the ability to work in a team environment are crucial for success in this role. Familiarity with testing methodologies and the ability to interpret technical drawings will be highly beneficial. A proactive attitude and eagerness to learn will help you thrive in our dynamic workplace.
View all details

Hiring BMS Engineer For New Delhi

Technicom Engineers Network

  • 3 - 5 yrs
  • 6.0 Lac/Yr
  • New Delhi
Building Automation Alarm Management Commissioning HVAC Systems Maintenance Electrical Systems Control Systems Software Configuration Fault Diagnosis Troubleshooting PLC Programming Networking System Integration Sensor Calibration Remote Monitoring Programming Logic
BMS Engineer - Urgent HiringTechnicom Engineers Network is looking for an experienced and technically skilled BMS Engineer to join our team. The candidate will be responsible for handling Building Management System (BMS), Building Automation and HVAC control systems across our projects.Key Responsibilities* Installation, testing and commissioning of BMS and Building Automation systems.* Configuration and monitoring of BMS systems and controllers.* Handling HVAC control systems, sensors, actuators and DDC controllers.* Troubleshooting BMS, HVAC control and communication-related issues.* Carrying out preventive and corrective maintenance of BMS systems.* Working with communication protocols such as BACnet and Modbus.* Coordinating with electrical, HVAC, project and site teams for smooth project execution.* Performing system testing, integration and commissioning at project sites.* Preparing site reports, testing/commissioning documents and other technical records.* Identifying faults and providing appropriate technical solutions.* Ensuring project work is completed according to required quality and safety standards.* Willingness to travel to project sites as required.Required Skills* Strong knowledge of BMS / Building Management Systems.* Hands-on experience in Building Automation.* Knowledge of HVAC Controls and DDC.* Experience in BMS installation, commissioning and troubleshooting.* Knowledge of BACnet / Modbus.* Understanding of sensors, actuators, controllers and BMS panels.* Knowledge of PLC/SCADA will be an added advantage.* Good technical, communication and coordination skills.* Ability to work independently as well as with project/site teams.Educational QualificationDiploma / B.E. / B.Tech in Electrical, Electronics, Instrumentation, Mechanical Engineering or a related field.Experience3-4+ years of relevant hands-on experience in BMS / Building Automation / HVAC Controls is preferred.Candidates with experience in BMS platforms such as Siemens, Schneider, Honeywell, Johnson Controls, Delta, Trane or other similar systems will be preferred.
View all details

CCTV Service Engineer

Technicom Engineers Network

  • 1 - 3 yrs
  • 2.3 Lac/Yr
  • Sukhdev Vihar Delhi
CCTV System Access Control System Fire Alarm System IP Camera Biometrics CCTV Installation CCTV Maintenance
CCTV Service engineersShould have proper technical knowledge of CCTV ,Access Control System, Biometric, EPABX-Intercom, Video Door Phone, Fire Alarm System, Boom Barrier, PA System and Routine Servicing/Maintenance, predominantly within industrial and Residential Sector.Trouble Shooting of CCTV, Installation & Configuration of IP Camera, DVR, NVR ,Candidate should be able to connect CCTV cameras with the network.Can work independently and handle customer queries.Commissioning, System integration & testing of CCTV Systems Troubleshooting of CCTV Systems, IP Cameras.installation, Troubleshooting, Servicing and repairs of CCTV, Fire Alarms,and Access Control Systems etc.Key SkillsCCTV, Fire Alarm, Access control system, Automation securtiy, drilling.
View all details
  • 0 - 1 yrs
  • 2.3 Lac/Yr
  • Nashik
Maintenance Engineer Project & Maintenance Engineer Trainee Maintenance Engineer System Maintenance Engineer Computer Maintenance Engineer
Key ResponsibilitiesPlan and execute preventive, predictive, and breakdown maintenance activities.Diagnose equipment faults and implement corrective actions.Monitor machine performance and recommend improvements to enhance reliability.Maintain records of maintenance activities, repairs, and spare parts inventory.Coordinate with production teams to minimize downtime and optimize equipment utilization.Ensure timely servicing of plant machinery, utilities, and equipment.Manage spare parts procurement and inventory control.Implement TPM, 5S, and continuous improvement initiatives.Ensure compliance with safety standards and maintenance procedures.Support installation, commissioning, and modification of machinery and equipment.
View all details
  • 1 - 3 yrs
  • 3.0 Lac/Yr
  • Nashik
Maintenance Engineer Project & Maintenance Engineer Trainee Maintenance Engineer System Maintenance Engineer Computer Maintenance Engineer Aircraft Maintenance Engineer
As a Maintenance Engineer in Nashik, you will play a vital role in ensuring the proper functioning and upkeep of machinery and equipment within the company. You will be responsible for diagnosing issues, performing repairs, and applying preventive measures to enhance operational efficiency.Key Responsibilities:- Conduct Regular Inspections: Regularly inspect machinery and equipment to identify any potential issues before they escalate into major problems. This proactive approach helps minimize downtime.- Perform Repairs and Maintenance: Carry out necessary repairs on faulty equipment and machinery, ensuring they are back in operation as quickly as possible.- Implement Preventive Maintenance Programs: Develop and execute preventive maintenance schedules to reduce unexpected equipment failures and enhance longevity.- Troubleshoot Equipment Issues: Analyze and diagnose technical problems in machinery and equipment, providing effective solutions to restore functionality.- Maintain Documentation: Keep detailed records of all maintenance activities, inspections, and repairs. This documentation is crucial for tracking performance and compliance.Required Skills and Expectations:- A Bachelors degree in Engineering (B.E.) is essential, ensuring you have the technical foundation for this role.- You should have 1 to 3 years of experience in a maintenance role, demonstrating your ability to handle machinery and equipment issues effectively.- Strong problem-solving skills are needed to diagnose and resolve equipment faults swiftly.- Good communication skills are required to work collaboratively with other team members and present findings clearly.- Attention to detail is crucial, as you will need to follow safety protocols and maintenance procedures accurately. - A proactive attitude towards maintenance and repair tasks will help you excel in this position.
View all details
  • 0 - 1 yrs
  • 3.5 Lac/Yr
  • Nashik
Cybersecurity Hardware Maintenance Operating Systems Programming Project Management System Upgrades Virtualization Database Management Technical Support Data Analysis Network Security Server Administration Scripting IT Infrastructure Software Installation
Job Title: Technical EngineerJob OverviewWe are seeking a highly analytical and solution-oriented Technical Engineer to oversee our technical operations, optimize production processes, and provide engineering support across departments. In this role, you will be responsible for troubleshooting complex machinery/system issues, supervising engineering projects, ensuring compliance with quality standards, and occasionally assisting clients with advanced technical queries.The ideal candidate possesses strong engineering fundamentals, hands-on diagnostic skills, and the ability to collaborate effectively with both on-ground production operators and senior management.Key Responsibilities1. Process Optimization & System TroubleshootingAnalyze existing engineering workflows, plant layouts, and machinery performance to identify bottlenecks and implement continuous improvements.Diagnose, troubleshoot, and resolve complex mechanical, electrical, or software-related faults in production equipment.Develop and implement standard operating procedures (SOPs) for machine usage, preventative maintenance, and safety protocols.2. Project Engineering & Design SupportCollaborate with design and R&D teams to translate blueprints, CAD models, and technical specifications into physical components or production runs.Oversee the installation, testing, and commissioning of new machinery, automated lines, or control systems.Manage technical documentation, including engineering drawings, component bills of materials (BOM), and validation reports.3. Quality Assurance & ComplianceMonitor production outputs to ensure compliance with company quality standards and international benchmarks (such as ISO standards).Conduct root-cause analysis (RCA) on product defects, material failures, or operational downtime, and deploy corrective actions.4. Technical Support & LiaisonProvide high-level technical guidance to production supervisors, machine operators, and maintenance technicians.Assist the sales or customer service teams by handling advanced technical queries from corporate clients, or joining on-site client consultations when required.
View all details
  • 0 - 1 yrs
  • 2.8 Lac/Yr
  • Roorkee
Software Installation Hardware Repair Operating Systems Documentation Skills Technical Troubleshooting Electrical Engineer Electrical Maintenance
Job for BE, BTech, Electrical diploma holder candidateCandidate job profile :-As a Service Engineer with a specialization in Electrical Engineering, you responsible for maintaining and improving electrical systems. Your role will involve troubleshooting issues, performing regular maintenance, and ensuring systems operate efficiently and safely. This position requires on-site support, technical expertise, and strong problem-solving skills.ResponsibilitiesTroubleshoot and resolve electrical system issues.Perform regular maintenance and inspections of electrical systems.Ensure compliance with safety and regulatory standards.Collaborate with other engineers and technicians to improve efficiency.Document service and maintenance activities accurately.Provide on-site technical support as needed.Manage and prioritize a schedule of multiple service tasks.
View all details
Mechanical Design AutoCAD Mechanical BE Mechanical Diploma Mechanical Diploma Mechanical Engineer Quality Engineering Design Engineer Production Engineer Process Engineer Maintenance Engineer Quality Control Engineer Project Engineer System Engineer Instrument & Control Engineer Power Plant Engineer Hvac Engineer
We are looking for a motivated Mechanical Engineer to join our team in New Zealand. This role is suitable for both fresh graduates and those with up to 6 years of experience in the field. The ideal candidate should be passionate about mechanical systems and eager to learn and grow in their career.Key Responsibilities:- Design Development: Create and improve mechanical designs for various projects, ensuring they meet required specifications and standards.- Testing and Analysis: Conduct tests on mechanical components and systems, analyzing data to ensure performance and reliability.- Collaboration: Work closely with other engineers and teams to integrate mechanical components with other systems, ensuring seamless operation.- Problem Solving: Identify mechanical issues and troubleshoot problems, providing innovative solutions to enhance system performance.- Documentation: Prepare detailed reports and documentation for designs, tests, and modifications to keep all project records up-to-date.Required Skills and Expectations:- A foundational understanding of mechanical engineering principles, supported by a 12th-grade education or equivalent.- Strong analytical skills to assess designs and troubleshoot mechanical issues effectively.- Ability to work collaboratively within a team environment while also having the initiative to manage independent tasks.- Excellent communication skills to clearly convey ideas and technical information to peers and stakeholders.- A willingness to learn and adapt to new technologies and methods in mechanical engineering.
View all details
Mechanical Design AutoCAD Mechanical BE Mechanical Diploma Mechanical Diploma Mechanical Engineer Quality Engineering Design Engineer Production Engineer Process Engineer Maintenance Engineer Quality Control Engineer Project Engineer System Engineer Instrument & Control Engineer Power Plant Engineer Hvac Engineer
Job Vacancy: Mechanical EngineerLocations: Singapore New Zealand AzerbaijanSalary: $2,000 $3,000 USD per monthContract Duration: 2-Year Work Permit Visa________________________________________About the Role:We are actively hiring skilled Mechanical Engineers for prominent construction projects in Singapore, New Zealand, and Azerbaijan. This is a prime opportunity to advance your engineering career internationally with excellent remuneration and full support.________________________________________Key Responsibilities: Design, develop, and oversee mechanical systems and equipment for construction projects Ensure compliance with engineering standards, safety regulations, and project requirements Collaborate with multidisciplinary teams to optimize mechanical solutions Monitor project progress, troubleshoot issues, and ensure timely delivery Prepare technical documentation and reports________________________________________Candidate Profile: Proven experience as a Mechanical Engineer, preferably in construction or infrastructure projects Strong knowledge of mechanical systems, design software, and safety protocols Excellent problem-solving, communication, and team collaboration skills Ready and willing to relocate internationally________________________________________Benefits Provided by the Company: Flight ticket included 2-year work permit visa provided Comprehensive medical insurance Free food and accommodation Visa and biometric expenses covered Minimal service charge with no hidden fees________________________________________Office Location for Application & Processing:AL HUDA MANPOWERKolkata, West Bengal________________________________________How to Apply:Interested candidates should send their updated resume and contact details to:AL HUDA MANPOWERKolkata, West Bengal________________________________________Seize this opportunity to elevate your career globally with full company support. Apply today!
View all details
  • 0 - 6 yrs
  • 50.0 Lac/Yr
  • Sweden
Circuit Design Power Systems PLC Programming Auto CAD Electrical Electrical Maintenance Control Systems Troubleshooting Load Calculation Renewable Energy Instrumentation
Major Roles & ResponsibilitiesDesign & DevelopmentDesign electrical systems, circuits, and components for various applicationsDevelop schematics and layout diagrams using tools like Auto CAD Electrical or EPLANSelect appropriate electrical materials and componentsInstallation & CommissioningOversee the installation of electrical systems and ensure proper functioningSupervise commissioning processes and conduct performance testsCoordinate with contractors and other engineering teams during implementationMaintenance & TroubleshootingInspect and maintain electrical equipment and systemsDiagnose faults and implement corrective actionsDevelop preventive maintenance schedulesProject ManagementPlan and execute electrical engineering projectsPrepare budgets, estimates, and project timelinesEnsure completion within cost, time, and quality targetsCompliance & SafetyEnsure systems comply with electrical codes and safety standards (e.g., IEC, NEC)Implement electrical safety protocols and risk assessmentsMaintain documentation for audits and inspectionsTesting & Quality AssurancePerform system tests and inspections using appropriate toolsVerify system integrity and performance before handoverEnsure quality control of electrical installations and productsControl Systems & AutomationDesign and implement control systems (e.g., SCADA, PLC)Integrate sensors, drives, and programmable devicesOptimize system performance for efficiency and automationDocumentation & ReportingMaintain technical documentation including drawings, test reports, and manualsPrepare regular progress and performance reportsUpdate records for maintenance and modificationsCollaboration & CommunicationWork with multidisciplinary teams (mechanical, civil, instrumentation)Communicate with vendors, clients, and contractorsProvide technical support and training to staff and stakeholdersInnovation & R&DResearch new technologies and energy-efficient solutionsContribute to product development and innovation projectsStay updated with industry trends and technological advancements
View all details
Circuit Design Power Systems PLC Programming Auto CAD Electrical Electrical Maintenance Control Systems Troubleshooting Load Calculation Renewable Energy Instrumentation
Major Roles & ResponsibilitiesDesign & DevelopmentDesign electrical systems, circuits, and components for various applicationsDevelop schematics and layout diagrams using tools like Auto CAD Electrical or EPLANSelect appropriate electrical materials and componentsInstallation & CommissioningOversee the installation of electrical systems and ensure proper functioningSupervise commissioning processes and conduct performance testsCoordinate with contractors and other engineering teams during implementationMaintenance & TroubleshootingInspect and maintain electrical equipment and systemsDiagnose faults and implement corrective actionsDevelop preventive maintenance schedulesProject ManagementPlan and execute electrical engineering projectsPrepare budgets, estimates, and project timelinesEnsure completion within cost, time, and quality targetsCompliance & SafetyEnsure systems comply with electrical codes and safety standards (e.g., IEC, NEC)Implement electrical safety protocols and risk assessmentsMaintain documentation for audits and inspectionsTesting & Quality AssurancePerform system tests and inspections using appropriate toolsVerify system integrity and performance before handoverEnsure quality control of electrical installations and productsControl Systems & AutomationDesign and implement control systems (e.g., SCADA, PLC)Integrate sensors, drives, and programmable devicesOptimize system performance for efficiency and automationDocumentation & ReportingMaintain technical documentation including drawings, test reports, and manualsPrepare regular progress and performance reportsUpdate records for maintenance and modificationsCollaboration & CommunicationWork with multidisciplinary teams (mechanical, civil, instrumentation)Communicate with vendors, clients, and contractorsProvide technical support and training to staff and stakeholdersInnovation & R&DResearch new technologies and energy-efficient solutionsContribute to product development and innovation projectsStay updated with industry trends and technological advancements
View all details
  • 3 - 9 yrs
  • 6.5 Lac/Yr
  • Ahmedabad
Estimation & Billing Engineer Electrical Engineering Project Management Testing and Commissioning Civil Designer Substation Design Civil Works Arc Flash Analysis Equipment Specification Control Systems High Voltage Grounding Systems Transformer Power Systems Protection Systems Relay Settings Substation Design Regulatory Compliance Switchgear Emergency Response Maintenance Planning Fault Analysis SCADA Substation Automation
As a Substation Engineer in Ahmedabad Gujarat, India, you will be responsible for designing, operating, and maintaining electrical substations. This role requires 3 to 9 years of experience and a graduate degree in a relevant field and Bhadanis Institute Substation Training Certificate or Nicmar or Rics preferable.Key responsibilities include:1. Design and Planning: Create detailed plans for new substations, ensuring they meet all safety and operational standards.2. System Analysis: Evaluate existing substation systems, conduct load flow studies, and identify areas for improvement or upgrades.3. Equipment Installation: Oversee the installation, testing, and commissioning of substation equipment, ensuring everything functions correctly and efficiently.4. Maintenance Coordination: Schedule and conduct regular maintenance checks, troubleshooting equipment issues to minimize downtime and ensure reliable service.5. Project Management: Manage projects from conception to execution, coordinating with contractors and ensuring deadlines and budgets are met.6. Compliance Management: Ensure all operations comply with regulatory standards and best practices, keeping up with changes in industry regulations.7. Bhadanis Trained Engineers or Rics or Nicmar PreferableRequired skills and expectations include strong analytical abilities to assess system performance and resolve issues effectively. You should possess excellent communication skills for collaboration with team members and clients. A proactive approach to problem-solving and a commitment to safety are essential. Familiarity with industry software and tools is also expected, along with the ability to work independently while contributing positively to a team environment.
View all details
  • 3 - 9 yrs
  • 6.5 Lac/Yr
  • Kolkata
Estimation & Billing Engineer Electrical Engineering Project Management Testing and Commissioning Civil Designer Substation Design Civil Works Arc Flash Analysis Equipment Specification Control Systems High Voltage Grounding Systems Transformer Power Systems Protection Systems Relay Settings Substation Design Regulatory Compliance Switchgear Emergency Response Maintenance Planning Fault Analysis SCADA Substation Automation
As a Substation Engineer in Kolkata West Bengal, India, you will be responsible for designing, operating, and maintaining electrical substations. This role requires 3 to 9 years of experience and a graduate degree in a relevant field and Bhadanis Institute Substation Training Certificate or Nicmar or Rics preferable.Key responsibilities include:1. Design and Planning: Create detailed plans for new substations, ensuring they meet all safety and operational standards.2. System Analysis: Evaluate existing substation systems, conduct load flow studies, and identify areas for improvement or upgrades.3. Equipment Installation: Oversee the installation, testing, and commissioning of substation equipment, ensuring everything functions correctly and efficiently.4. Maintenance Coordination: Schedule and conduct regular maintenance checks, troubleshooting equipment issues to minimize downtime and ensure reliable service.5. Project Management: Manage projects from conception to execution, coordinating with contractors and ensuring deadlines and budgets are met.6. Compliance Management: Ensure all operations comply with regulatory standards and best practices, keeping up with changes in industry regulations.7. Bhadanis Trained Engineers or Rics or Nicmar PreferableRequired skills and expectations include strong analytical abilities to assess system performance and resolve issues effectively. You should possess excellent communication skills for collaboration with team members and clients. A proactive approach to problem-solving and a commitment to safety are essential. Familiarity with industry software and tools is also expected, along with the ability to work independently while contributing positively to a team environment.
View all details
  • 3 - 9 yrs
  • 6.5 Lac/Yr
  • Chennai
Estimation & Billing Engineer Electrical Engineering Project Management Testing and Commissioning Civil Designer Substation Design Civil Works Arc Flash Analysis Equipment Specification Control Systems High Voltage Grounding Systems Transformer Power Systems Protection Systems Relay Settings Substation Design Regulatory Compliance Switchgear Emergency Response Maintenance Planning Fault Analysis SCADA Substation Automation
As a Substation Engineer in Chennai Tamilnadu, India, you will be responsible for designing, operating, and maintaining electrical substations. This role requires 3 to 9 years of experience and a graduate degree in a relevant field and Bhadanis Institute Substation Training Certificate or Nicmar or Rics preferable.Key responsibilities include:1. Design and Planning: Create detailed plans for new substations, ensuring they meet all safety and operational standards.2. System Analysis: Evaluate existing substation systems, conduct load flow studies, and identify areas for improvement or upgrades.3. Equipment Installation: Oversee the installation, testing, and commissioning of substation equipment, ensuring everything functions correctly and efficiently.4. Maintenance Coordination: Schedule and conduct regular maintenance checks, troubleshooting equipment issues to minimize downtime and ensure reliable service.5. Project Management: Manage projects from conception to execution, coordinating with contractors and ensuring deadlines and budgets are met.6. Compliance Management: Ensure all operations comply with regulatory standards and best practices, keeping up with changes in industry regulations.7. Bhadanis Trained Engineers or Rics or Nicmar PreferableRequired skills and expectations include strong analytical abilities to assess system performance and resolve issues effectively. You should possess excellent communication skills for collaboration with team members and clients. A proactive approach to problem-solving and a commitment to safety are essential. Familiarity with industry software and tools is also expected, along with the ability to work independently while contributing positively to a team environment.
View all details

Utility Engineer - Bharuch Gujarat

Capital Placement Services

  • 5 - 11 yrs
  • Bharuch
Steam Boiler Operation Air Compressor Maintenance HVAC & AHU Systems Fire Fighting System Hydropneumatic Systems Preventive Maintenance Contractor Management
We are seeking a skilled Utility Engineer to join our team in Bharuch. The ideal candidate will have 5 to 11 years of experience and a Bachelor of Engineering degree. This full-time position requires working from the office and is open to male applicants only.Key Responsibilities:- Utility Management: Oversee the operation and maintenance of utility systems, including water, electricity, and compressed air, ensuring they run efficiently and reliably.- System Optimization: Analyze current utility systems and suggest improvements aimed at reducing operational costs and increasing efficiency and reliability.- Compliance Monitoring: Ensure all utility operations comply with local regulations and safety standards to maintain a safe working environment.- Troubleshooting and Repair: Respond to utility-related issues, diagnosing problems quickly, and implementing effective solutions.- Project Coordination: Work with cross-functional teams to implement utility-related projects, ensuring they are completed on time and within budget.- Data Analysis and Reporting: Monitor utility consumption data and prepare reports for management, identifying trends and making recommendations based on findings.Required Skills and Expectations:Candidates should possess strong technical knowledge of utility systems and engineering principles. Excellent problem-solving skills and the ability to work under pressure are essential. Effective communication and project management skills are crucial to coordinate with various teams effectively. Proficiency in data analysis tools will be advantageous, as well as a commitment to safety and regulatory compliance. A proactive attitude and the ability to adapt to changing situations are also expected.
View all details
  • 4 - 10 yrs
  • Bharuch
Steam Boiler Operation Air Compressor Maintenance HVAC & AHU Systems Fire Fighting System Hydropneumatic Systems Preventive Maintenance Contractor Management
As a Utility Maintenance Engineer based in Bharuch, you will be responsible for ensuring the smooth operation and maintenance of utility systems within the facility. This role requires a keen understanding of various engineering processes and maintenance practices.Key Responsibilities:- Routine Maintenance: Conduct regular checks on utility systems like boilers, chillers, and water treatment plants to ensure they are functioning efficiently.- Troubleshooting: Identify and resolve issues in utility equipment quickly to minimize downtime and maintain production schedules.- System Upgrades: Work on improving existing utility systems by integrating new technologies and practices to enhance performance and efficiency.- Documentation: Maintain accurate records of maintenance activities, inspections, and compliance with safety and quality standards for future reference.- Collaboration: Coordinate with other departments to understand their utility needs and provide solutions to meet their requirements effectively.Required Skills and Expectations:- A Bachelors degree in Engineering (B.E) is essential, with a focus on mechanical or electrical disciplines preferred.- Candidates should have 4 to 10 years of experience in utility maintenance, showcasing a solid understanding of various utility systems.- Strong problem-solving skills and the ability to work under pressure are necessary to effectively address maintenance challenges.- Good communication skills will be vital for teamwork and reporting findings to management.- A proactive approach to maintenance and a commitment to safety and quality standards are expected in this role.
View all details
  • 5 - 11 yrs
  • 8.0 Lac/Yr
  • Bharuch
Electrical Maintenance HT & LT Systems VCB Transformer Maintenance OLTC LT Panels ACB APFC Panel IMCC DCS Motors Star Delta Starter Soft Starter DG Synchronization UPS HVAC Boiler Utilities Air Compressor Chiller PLC SAP Preventive Maintenance Predictive Maintenance Troubleshooting Earthing Lightning Protection Hazardous Area HAZOP HIRA RCA LOTO Permit to Work Electrical Safety Inventory Control
We are seeking an experienced Electrical Maintenance Engineer to join our team in Bharuch. The candidate will be responsible for ensuring the smooth operation of electrical systems and equipment in our facility.Key Responsibilities:- Maintenance of Electrical Systems: Perform regular maintenance on electrical systems to prevent breakdowns and ensure optimal performance.- Troubleshooting Issues: Identify and resolve electrical faults quickly to minimize downtime and improve operational efficiency.- Installation of Equipment: Oversee the installation of new electrical equipment, ensuring it meets safety and quality standards.- Conduct Inspections: Regularly inspect electrical installations and machinery to ensure compliance with safety regulations and identify potential hazards.- Documentation: Maintain accurate records of maintenance activities, inspections, and repairs to facilitate future reference and compliance.- Collaboration with Teams: Work closely with other engineering and maintenance teams to coordinate tasks and improve overall maintenance strategies.Required Skills and Expectations:The ideal candidate should have a Bachelors degree in Electrical Engineering and 5 to 11 years of relevant experience in electrical maintenance. Strong troubleshooting and problem-solving skills are essential. The candidate must possess a thorough understanding of electrical systems, safety regulations, and maintenance best practices. Additionally, good communication skills are vital for effective collaboration with team members and other departments. The candidate should also be able to work independently and adapt to various situations, maintaining a proactive approach to maintenance challenges.
View all details
View More Jobs