Fresher Power Engineer Jobs

We are looking for a Digital Design Engineer to join our team, available for both part-time and full-time roles. This position is suitable for freshers and requires a minimum education of 10th pass. You will work from home, contributing to exciting design projects.Key Responsibilities:1. **Digital Design Creation**: You will design digital graphics and layouts for various projects using software tools. This involves creating visually appealing and user-friendly designs based on project requirements.2. **Collaboration with Team**: You will work closely with other team members to understand project goals and deliver design solutions that meet those objectives. Communication skills will help in sharing ideas and receiving feedback.3. **Design Review and Revision**: You will review your designs and make necessary revisions based on feedback from team members or clients. This ensures that the final output aligns with expectations and improves over time.4. **Staying Updated on Trends**: You are expected to keep up with current design trends and software advancements. This helps in bringing fresh ideas to your work and ensuring that designs are relevant and modern.Required Skills and Expectations:We expect you to have basic knowledge of digital design tools and an understanding of design principles. Strong creativity and attention to detail are essential for producing high-quality work. Being self-motivated and managing your time effectively will help you succeed in a remote work environment.

1. Execute the installation and alignment of weighbridge platforms (pit or pitless) at customer sites.Install load cells, junction boxes, indicators, and weighbridge controllers. 2. Perform electronic commissioning, including cable laying, junction box wiring, and indicator configuration.3. Perform initial and final calibration using test weights to ensure accuracy.4. Conduct function/operational testing to verify performance.5. Servicing, Troubleshooting & RepairProvide on-site repair and maintenance (preventive and breakdown) for Electronic Weighbridges.Diagnose and fix technical issues related to load cells, indicators, and weighing software.Attend to service calls from customers and provide technical support via phone/email6. Customer Support & TrainingTrain customer personnel on operating the weighbridge and software.Maintain a cordial relationship with clients.

Major Roles & ResponsibilitiesDesign & DevelopmentDesign electrical systems, circuits, and components for various applicationsDevelop schematics and layout diagrams using tools like Auto CAD Electrical or EPLANSelect appropriate electrical materials and componentsInstallation & CommissioningOversee the installation of electrical systems and ensure proper functioningSupervise commissioning processes and conduct performance testsCoordinate with contractors and other engineering teams during implementationMaintenance & TroubleshootingInspect and maintain electrical equipment and systemsDiagnose faults and implement corrective actionsDevelop preventive maintenance schedulesProject ManagementPlan and execute electrical engineering projectsPrepare budgets, estimates, and project timelinesEnsure completion within cost, time, and quality targetsCompliance & SafetyEnsure systems comply with electrical codes and safety standards (e.g., IEC, NEC)Implement electrical safety protocols and risk assessmentsMaintain documentation for audits and inspectionsTesting & Quality AssurancePerform system tests and inspections using appropriate toolsVerify system integrity and performance before handoverEnsure quality control of electrical installations and productsControl Systems & AutomationDesign and implement control systems (e.g., SCADA, PLC)Integrate sensors, drives, and programmable devicesOptimize system performance for efficiency and automationDocumentation & ReportingMaintain technical documentation including drawings, test reports, and manualsPrepare regular progress and performance reportsUpdate records for maintenance and modificationsCollaboration & CommunicationWork with multidisciplinary teams (mechanical, civil, instrumentation)Communicate with vendors, clients, and contractorsProvide technical support and training to staff and stakeholdersInnovation & R&DResearch new technologies and energy-efficient solutionsContribute to product development and innovation projectsStay updated with industry trends and technological advancements

Job SummaryThe Avionics Engineer is responsible for the design, development, testing, installation, and maintenance of aircraft electronic systems. This role ensures safe, efficient, and compliant operation of avionics equipment including communication, navigation, surveillance, and flight control systems. The engineer works closely with cross-functional teams to support system integration, troubleshooting, upgrades, and continuous improvement in aviation technology. Key ResponsibilitiesDesign & Development:Design, develop, and integrate avionics systems for aircraft and aerospace applications.Create system schematics, wiring diagrams, and interface control documents.Develop embedded software or hardware for avionics components.Testing & Troubleshooting:Conduct system testing, validation, calibration, and verification to ensure performance standards.Diagnose issues in avionics equipment using testing tools and propose corrective actions.Perform root cause analysis for system failures and implement preventive measures.Installation & Integration:Oversee installation and configuration of avionics systems in aircraft.Ensure seamless integration of avionics with electrical, mechanical, and flight control systems.Coordinate with manufacturing, maintenance, and flight operations teams for system implementation.Compliance & Documentation:Ensure compliance with aviation authorities (FAA, EASA, DGCA) and safety standards.Prepare technical reports, maintenance manuals, and certification documentation.Maintain accurate documentation of design changes, test results, and system configuration.Maintenance & Support:Support maintenance teams in periodic inspections, upgrades, repairs, and system checks.Provide engineering support for aircraft modifications, retrofits, and new product introductions. Required Skills & CompetenciesTechnical Skills:Strong knowledge of communication, navigation, surveillance, autopilot, and flight control systems.Expertise in embedded systems, digital/analog electronics, and circuit design.Hands-on experience with avionics protocols (e.g., ARINC 429, MIL-STD-1553, CAN bus).Proficiency in tools such as MATLAB/Simulink, LabVIEW, PSPICE, Altium, Xilinx, or similar.Knowledge of aviation standards DO-178C, DO-254, RTCA, FAA/EASA guidelines.Soft Skills:Analytical and problem-solving ability with strong attention to detail.Effective communication, teamwork, documentation, and time-management skills.Ability to work under pressure and meet strict deadlines. Education & Experience RequirementsBachelors degree in Avionics Engineering, Aerospace Engineering, Electronics & Communication, Electrical Engineering, or related field.(Preferred) Masters degree in Avionics or related specialization.Experience:Entry Level: 02 yearsMid-Level: 37 yearsSenior: 8+ years in avionics engineering or related aerospace domain Work EnvironmentMay require working in aircraft hangars, manufacturing facilities, laboratories, or test sites.Willingness to travel for project support, testing, and system installation.Must adhere to aviation safety regulations and workplace safety protocols. Job Type & CompensationFull-time / PermanentCompetitive salary based on experience and qualificationsBenefits: Health insurance, travel allowance, training & professional development

Job Vacancy: Mechanical EngineerLocations: Singapore New Zealand AzerbaijanSalary: $2,000 $3,000 USD per monthContract Duration: 2-Year Work Permit Visa________________________________________About the Role:We are actively hiring skilled Mechanical Engineers for prominent construction projects in Singapore, New Zealand, and Azerbaijan. This is a prime opportunity to advance your engineering career internationally with excellent remuneration and full support.________________________________________Key Responsibilities: Design, develop, and oversee mechanical systems and equipment for construction projects Ensure compliance with engineering standards, safety regulations, and project requirements Collaborate with multidisciplinary teams to optimize mechanical solutions Monitor project progress, troubleshoot issues, and ensure timely delivery Prepare technical documentation and reports________________________________________Candidate Profile: Proven experience as a Mechanical Engineer, preferably in construction or infrastructure projects Strong knowledge of mechanical systems, design software, and safety protocols Excellent problem-solving, communication, and team collaboration skills Ready and willing to relocate internationally________________________________________Benefits Provided by the Company: Flight ticket included 2-year work permit visa provided Comprehensive medical insurance Free food and accommodation Visa and biometric expenses covered Minimal service charge with no hidden fees________________________________________Office Location for Application & Processing:AL HUDA MANPOWERKolkata, West Bengal________________________________________How to Apply:Interested candidates should send their updated resume and contact details to:AL HUDA MANPOWERKolkata, West Bengal________________________________________Seize this opportunity to elevate your career globally with full company support. Apply today!

Any stream (preferably Electronics and Electrical Branch candidates) for the role of field service engineer To carry out maintenance, installation & commissioning and breakdown services for our products at the customers premise. Male candidates will be preferred. This is Field role and it is mandatory for the candidate to have a license and vehicle of their own. Any stream (preferably male candidates) for the role of field service engineer To carry out maintenance, installation & commissioning and breakdown services for our products at the customers premise. Male candidates will be preferred Should have own vehicle and driving license

Candidates (preferably Electronics and Electrical Branch candidates) with good grasping ability. Be self-motivated and have good analytical thinking for roles, not limited to, Business Leads Generation, Customers interaction, Key account management, Follow-ups, Deal closures, Account Relationship management etc. This is a field role and would be target driven. Male candidates will be preferred. Should have own vehicle and driving license

Major Roles & ResponsibilitiesDesign & DevelopmentDesign electrical systems, circuits, and components for various applicationsDevelop schematics and layout diagrams using tools like Auto CAD Electrical or EPLANSelect appropriate electrical materials and componentsInstallation & CommissioningOversee the installation of electrical systems and ensure proper functioningSupervise commissioning processes and conduct performance testsCoordinate with contractors and other engineering teams during implementationMaintenance & TroubleshootingInspect and maintain electrical equipment and systemsDiagnose faults and implement corrective actionsDevelop preventive maintenance schedulesProject ManagementPlan and execute electrical engineering projectsPrepare budgets, estimates, and project timelinesEnsure completion within cost, time, and quality targetsCompliance & SafetyEnsure systems comply with electrical codes and safety standards (e.g., IEC, NEC)Implement electrical safety protocols and risk assessmentsMaintain documentation for audits and inspectionsTesting & Quality AssurancePerform system tests and inspections using appropriate toolsVerify system integrity and performance before handoverEnsure quality control of electrical installations and productsControl Systems & AutomationDesign and implement control systems (e.g., SCADA, PLC)Integrate sensors, drives, and programmable devicesOptimize system performance for efficiency and automationDocumentation & ReportingMaintain technical documentation including drawings, test reports, and manualsPrepare regular progress and performance reportsUpdate records for maintenance and modificationsCollaboration & CommunicationWork with multidisciplinary teams (mechanical, civil, instrumentation)Communicate with vendors, clients, and contractorsProvide technical support and training to staff and stakeholdersInnovation & R&DResearch new technologies and energy-efficient solutionsContribute to product development and innovation projectsStay updated with industry trends and technological advancements