Fresher Maintenance Mechanic Jobs

An Aircraft Maintenance Engineer (AME) is responsible for inspecting, maintaining, repairing, troubleshooting, and certifying aircraft to ensure they are safe, airworthy, and compliant with aviation regulations. The role involves carrying out scheduled and unscheduled maintenance on aircraft systems, engines, avionics, electrical components, hydraulic systems, landing gear, and structural components while adhering to the standards established by aviation authorities.Key ResponsibilitiesAircraft Inspection & MaintenancePerform routine, preventive, scheduled, and unscheduled aircraft maintenance.Conduct daily, transit, weekly, A-check, B-check, C-check, and heavy maintenance inspections.Inspect aircraft structures, fuselage, wings, landing gear, flight controls, and engines.Diagnose and rectify aircraft defects using approved maintenance procedures.Replace, repair, and overhaul defective aircraft components.Ensure all maintenance tasks are completed according to the Aircraft Maintenance Manual (AMM).Troubleshooting & RepairsIdentify mechanical, hydraulic, electrical, pneumatic, and avionics faults.Use specialized diagnostic tools and testing equipment.Repair aircraft systems while maintaining manufacturer specifications.Coordinate with engineering teams for complex technical issues.Perform functional tests after repairs to verify serviceability.Engine & Component MaintenanceInspect aircraft engines for wear, leaks, corrosion, and damage.Perform engine servicing, oil changes, filter replacement, and component inspections.Maintain propellers, Auxiliary Power Units (APU), and fuel systems.Monitor engine performance and recommend corrective actions.Avionics & Electrical SystemsInspect communication and navigation systems.Maintain radar, autopilot, cockpit instrumentation, and electrical wiring.Test aircraft electronic systems for operational reliability.Ensure compliance with avionics maintenance procedures.Documentation & ComplianceComplete maintenance logs, inspection reports, and defect records.Maintain aircraft technical documentation accurately.Ensure compliance with aviation regulatory authorities.Certify aircraft for return to service after maintenance (where appropriately licensed).Follow company maintenance policies and quality assurance procedures.Safety & Quality AssuranceFollow all aviation safety regulations and standard operating procedures.Maintain clean and organized work areas.Ensure proper use of Personal Protective Equipment (PPE).Report safety hazards and technical discrepancies immediately.Participate in safety audits and quality inspections.Team CoordinationWork closely with pilots, technicians, quality inspectors, and operations staff.Coordinate maintenance schedules with flight operations.Assist junior technicians with technical guidance and training.Participate in emergency aircraft recovery and AOG (Aircraft on Ground) support.Required QualificationsDiploma or Bachelor's Degree in Aircraft Maintenance Engineering, Aeronautical Engineering, Mechanical Engineering, or Aerospace Engineering.DGCA-approved AME qualification or equivalent aviation authority certification is preferred.Valid Aircraft Maintenance Engineer License (where applicable).Type rating on specific aircraft is an advantage.Relevant experience in aircraft maintenance is preferred.Required SkillsStrong knowledge of aircraft systems and maintenance procedures.Excellent troubleshooting and fault diagnosis skills.Knowledge of aviation regulations and airworthiness standards.Ability to interpret aircraft maintenance manuals and engineering drawings.Strong analytical and problem-solving abilities.Excellent attention to detail.Good communication and teamwork skills.Ability to work under pressure and meet strict deadlines.Computer proficiency in maintenance management software.Good technical documentation skills.Technical KnowledgeAircraft StructuresGas Turbine EnginesHydraulic SystemsPneumatic SystemsElectrical SystemsAvionics SystemsFlight Control SystemsLanding Gear SystemsFuel SystemsAircraft DocumentationMaintenance PlanningAircraft Safety StandardsPreferred CertificationsDGCA Aircraft Maintenance Engineer LicenseEASA Part-66 License (preferred internationally)ICAO-compliant aviation trainingHuman Factors TrainingSafety Management System (SMS) TrainingFuel Tank Safety TrainingEWIS (Electrical Wiring Interconnection System) TrainingAircraft Type Rating CertificationWorking ConditionsAirport hangars, maintenance bases, and line maintenance stations.Rotational shifts including nights, weekends, and public holidays.Outdoor work in varying weather conditions.Physically demanding work involving standing, climbing, bending, and lifting equipment.Exposure to aircraft noise, fuels, lubricants, and hydraulic fluids while following strict safety procedures.Salary Range (India)Fresher: 3.5 - 6 LPA2-5 Years: 6 - 10 LPA5-10 Years: 10 - 18 LPALicensed/Type-Rated AME: 15 - 30+ LPA (depending on airline, aircraft type, and experience)

Job Title: Mechanical Engineer - Oil & Gas Company - Dubai - FresherJob Description:Urgently Required Mechanical Engineer for a Leading Oil and Gas Company in Dubai, UAE.We are hiring BE Mechanical Fresher candidates for Oil & Gas Project.Job Details:*Position: Mechanical Engineer*Company Type: Oil and Gas Company*Location: Dubai, United Arab Emirates*Salary: 2000 AED Basic + 500 AED Allowance (Total 2500 AED)*Qualification: BE in Mechanical Engineering*Experience: Fresher - 0 to 2 Years (Fresher Can Apply)*Age Limit: 23 to 37 Years*Gender: MaleJob Responsibilities:*Assist in mechanical maintenance and operations in oil & gas plant*Understanding of engineering drawings and plant equipment*Quality checking and reporting*Coordination with senior engineers*Follow safety rules and regulationsInterview Mode: Document Verification & Online InterviewImportant Note: No Food and No Accommodation Provided by Company. Candidates should be ready to manage on their own.Benefits:*Good opportunity for Fresher in Oil & Gas sector*Career growth in UAEInterested candidates apply immediately with updated CV, Passport, Education Certificates.Contact details:-Mr. Abdul Jaleel-8940404074 /9944161395Address-Address - NO.12 Ground Floor, Sun Complex Ultra Complex Street, City - Madurai, State - tamil naduIndia

We are seeking a Mechanical Fitter to join our team in Baramati Midc, Pune. This role is suitable for candidates with 0 to 5 years of experience and requires at least a 10th-grade education.Key Responsibilities:- Assembly and Maintenance: You will assemble and maintain mechanical systems and machinery. EOT crane maintenance, Height work- Troubleshooting: Identify and resolve mechanical issues to ensure equipment operates efficiently. This includes conducting tests and inspections to determine problems.- Machinery Installation: Assist in installing new machinery and equipment in compliance with safety standards and specifications. Proper installation is crucial for long-term functionality.- Collaboration: Work closely with engineers and other technicians to support project goals. Effective communication will help in coordinating tasks and adhering to project timelines.Required Skills and Expectations:Candidates should have a strong understanding of mechanical systems and tools. Attention to detail is essential for executing precise work and ensuring safety measures. Basic problem-solving skills are necessary to troubleshoot issues as they arise. A readiness to learn and adapt in a fast-paced work environment is important for success in this role. Additionally, candidates should be effective team players, contributing positively to group efforts and maintaining a safe and productive workspace.

Placement Charges ApplicableCareer club consultancy. NashikMaintenance Engineer BE Mechanical -MaleFreshers/ExperiencedSal -Upto 14 KNashik

DESCRIPTIONAs a Rigger, you will be responsible for the setup and operation of lifting equipment and ensuring that loads are handled safely and efficiently on-site in Saudi Arabia. Your primary duties will include:- Load Rigging: Prepare and secure loads using ropes, chains, and other rigging equipment to ensure safe lifting and moving of materials.- Equipment Inspection: Regularly check rigging equipment for wear and tear; report any issues to ensure safety and compliance with industry standards.- Collaboration: Work closely with crane operators and other team members to coordinate lifting activities, ensuring proper communication throughout.- Safety Compliance: Follow all safety protocols and procedures, including wearing personal protective equipment (PPE) and complying with local regulations.- Maintenance Assistance: Assist in basic maintenance of rigging equipment, ensuring it remains in good working condition for optimal performance.Required skills and expectations for this role include:- Physical Fitness: Ability to perform physically demanding tasks, including lifting heavy loads and working in various weather conditions.- Teamwork: Strong collaboration skills to work effectively with others in a busy environment focused on safety and efficiency.- Attention to Detail: Keen observation skills to notice potential hazards and ensure precision in rigging activities.- Basic Knowledge of Rigging: A fundamental understanding of rigging techniques and equipment, with a willingness to learn during practical work experiences.- Communication Skills: Good verbal communication to clearly convey information and skills to coworkers and supervisors.Candidates should have completed their 12th grade and can range from 0 to 4 years of experience in this field, which will help in contributing to high-quality work outcomes in a full-time office setting.

We are looking for a dedicated Maintenance Engineer to join our team based in Sriperumbudur. This full-time role is suitable for candidates with 0 to 2 years of experience and requires a diploma in engineering. Ideal candidates should be male and comfortable working from home.Key Responsibilities:- Equipment Maintenance: Regularly inspect and maintain machinery to ensure optimal performance. This includes troubleshooting and repairing equipment to minimize downtime.- Technical Support: Provide technical assistance to team members regarding maintenance issues. This helps in solving problems quickly and ensures smooth operations.- Documentation: Maintain accurate records of maintenance activities, including repairs and service schedules. This documentation is crucial for compliance and tracking performance.- Safety Compliance: Ensure that all maintenance activities adhere to safety regulations. This protects both the employees and the machinery used in operations.- Collaboration: Work closely with other departments to identify maintenance needs and prioritize tasks. Effective communication ensures that maintenance aligns with production goals.Required Skills and Expectations:Candidates should have a basic understanding of machinery and maintenance processes. Strong problem-solving skills are essential for diagnosing issues quickly. Effective communication skills are needed to work well with others and convey technical information clearly. A proactive attitude towards learning and adapting to new technologies will be beneficial. Flexibility to work from home while maintaining productivity is expected in this role.

As an Aircraft Maintenance Engineer, you will play a vital role in ensuring the safety and reliability of aircraft. You will be responsible for performing maintenance, repairs, and inspections on various aircraft systems. Key Responsibilities:- Conduct Routine Inspections: Regularly check aircraft systems, engines, and structures to ensure they meet safety standards and operational requirements.- Perform Repairs: Diagnose and fix issues with aircraft components such as engines, electrical systems, and landing gear to maintain high operational performance.- Documentation: Maintain accurate records of all maintenance activities and inspections performed to comply with aviation regulations and standards.- Collaborate with Team: Work closely with other engineers and technicians to share knowledge and ensure that all maintenance tasks are completed efficiently and safely.- Adhere to Safety Regulations: Follow all safety protocols and guidelines to maintain a safe working environment for yourself and your colleagues.Required Skills and Expectations:A good candidate should have a keen attention to detail, as accuracy is critical in aviation. Effective communication and teamwork skills are essential to work well with other professionals in the field. The ability to problem-solve quickly and efficiently is important, especially when dealing with unexpected issues. Basic technical knowledge of aviation systems and a strong commitment to safety and compliance with regulations are crucial. Candidates with a background in engineering or a strong interest in aircraft maintenance will find this position rewarding.

As a Fitter Turner, you will play a vital role in the manufacturing process by working with various machines to create and repair metal parts. Your primary responsibilities will include:- Setting Up Machines: Prepare and set up turning machines and tools to ensure they are ready for operation, following technical specifications.- Producing Components: Use lathes and milling machines to shape and cut metal pieces according to the required design and measurements.- Quality Checking: Regularly inspect and measure parts to ensure they meet defined quality standards and specifications, identifying any defects.- Maintenance of Equipment: Perform routine maintenance and minor repairs on machines to keep them in good working condition, ensuring minimal downtime.- Collaboration: Work closely with other team members and departments to ensure efficient workflow and communicate any issues that may arise during production.Required skills and expectations for this role include:- Technical Knowledge: You should have a solid understanding of fitting and turning techniques, as well as the operation of relevant machinery.- Attention to Detail: A keen eye for precision is crucial, as you will be working with intricate parts where even small mistakes can lead to significant issues.- Problem-solving Skills: Ability to troubleshoot and resolve issues that arise during the manufacturing process effectively.- Physical Stamina: This job requires manual labor and the ability to stand for long periods, so physical fitness is important.- Basic Computer Literacy: Familiarity with basic computer operations may be beneficial for tracking production and maintaining records.

Looking for Mechanical Design Engineer with Diploma or BE in Mechanical Engineering academic background . Looking for both fresher & Experienced candidate with 2-3 years of experience in Solid work designing.

We are looking for an Aircraft Engineer to join our team in Mumbai. In this role, you will be responsible for ensuring the safety and efficiency of our aircraft operations. You will have the opportunity to work with experienced professionals and learn about aircraft systems and maintenance.Key Responsibilities:- Conduct Inspections: You will perform regular checks on aircraft to ensure they meet safety standards and are in good working condition.- Maintenance and Repairs: You will be responsible for diagnosing issues and carrying out repairs, ensuring that all work is completed according to regulations.- Documentation: Keeping accurate records of maintenance work and inspections is essential for compliance and safety checks.- Collaboration: You will work closely with other engineers and technicians to coordinate maintenance schedules and share knowledge.- Compliance with Standards: You will ensure all operations comply with aviation safety regulations and industry standards.Required Skills and Expectations:- A background in engineering is preferred, but a 12th-grade education is acceptable. - Strong problem-solving skills are essential for diagnosing aircraft issues effectively.- Attention to detail is crucial as aircraft maintenance requires precision and accuracy.- Basic knowledge of aircraft systems or willingness to learn is expected.- Strong communication skills are important for collaborating with team members and documenting inspections and repairs.- A proactive attitude towards safety and a desire to grow in the aviation field will be highly valued.

ITI Technician - Hyderabad Location: Hyderabad Salary: Negotiable Job Type: Full-Time Freshers & Experienced Candidates Can ApplyEligibility ITI (All Trades)Job DescriptionWe are looking for dedicated and technically skilled Technicians to join our manufacturing team. The ideal candidate will be responsible for operating, maintaining, and troubleshooting equipment while ensuring smooth production operations. Freshers and experienced candidates are welcome to apply.Key Responsibilities Operate and monitor production machinery and equipment Perform routine maintenance and basic repairs Troubleshoot equipment and process-related issues Follow safety guidelines and company procedures Assist in production and manufacturing activities Conduct equipment inspections and report abnormalities Maintain records of maintenance and production activities Ensure workplace cleanliness and organization Support quality standards and compliance requirements Work effectively with team members to achieve production targetsDesired Skills Machine Operation Preventive Maintenance Troubleshooting Skills Equipment Handling Technical Knowledge Safety Awareness Quality Inspection Problem Solving Skills Teamwork and Communication Time Management

Responsibilities:Design & Development:Participate in the design and development of mechanical components, products, tools, or systems from concept to completion.Utilize CAD software (e.g., SolidWorks, AutoCAD, Creo, Inventor) for 3D modeling, detailed 2D drafting, and assembly creation.Contribute to the selection of appropriate materials and manufacturing processes.Engineering Analysis:Perform engineering calculations (e.g., stress, strain, kinematics, fluid dynamics) to validate designs and predict performance.Conduct basic simulations (e.g., FEA - Finite Element Analysis) to analyze design behavior and identify potential issues.Prototyping & Testing:Assist in the development and fabrication of prototypes.Participate in testing and validation of mechanical designs, analyzing test data, and proposing design modifications.Production Support & Optimization:Provide technical support to the production and manufacturing teams to ensure designs are efficiently produced.Identify and implement opportunities for process improvement, cost reduction, and quality enhancement in manufacturing.Troubleshoot and resolve technical issues that arise during production or assembly.Quality Assurance & Standards:Ensure all designs and processes comply with relevant industry standards (e.g., ISO, ASME), safety regulations, and quality requirements.Prepare and maintain comprehensive technical documentation, including drawings, Bill of Materials (BOMs), specifications, and reports.Collaboration & Communication:Work effectively with cross-functional teams including electrical engineers, production staff, quality control, and supply chain.Communicate technical information clearly and concisely to diverse audiences. Fluency in Marathi and Hindi is beneficial for local team interaction and understanding instructions. Good English proficiency is essential for technical documentation, design reviews, and broader professional communication.Continuous Learning:Stay updated with the latest advancements in mechanical engineering practices, tools, and technologies.

Analyzing the blueprints for mechanical systems to determine the specifications of the components to be constructed.Constructing structural components from raw materials.Using welding equipment to fuse structural components.Inspecting fabricated components to ensure that they are the correct size.Utilizing shears, power saws, cutting torches, and chipper knives to cut structural components as needed.Creating a suitable maintenance schedule and performing system maintenance accordingly.Conducting diagnostic testing on malfunctioning systems to determine the root cause of the malfunction.

Designing, maintaining, implementing, or improving electrical instruments, facilities, components, equipment products, or systems for industrial, commercial, or domestic purposes.Performing a wide range of engineering tasks by operating computer-assisted design or engineering software and equipment.Conferring with customers, engineers, and others to discuss existing or potential engineering products or projects.Ensuring that installation and operations conform to standards and customer requirements by preparing electrical systems specifications, technical drawings, or topographical maps.Establishing construction, manufacturing, or installation standards or specifications by performing a wide range of detailed calculations.

As an Aircraft Engineer, you will be responsible for ensuring the safety and efficiency of aircraft. Your role will involve a range of technical tasks and teamwork to maintain high standards in aviation.Key Responsibilities:- Conduct Inspections: Regularly examine aircraft to identify any mechanical issues, ensuring they meet safety regulations.- Perform Repairs and Maintenance: Carry out necessary repairs and routine maintenance on various aircraft systems, addressing any faults to ensure operational readiness.- Diagnose Technical Issues: Utilize tools and technical knowledge to troubleshoot and solve problems that arise during aircraft operation.- Collaborate with Team Members: Work closely with other engineers and technicians to enhance aircraft performance and safety measures.- Document Findings: Maintain accurate records of inspections, repairs, and parts used to ensure compliance with aviation standards.Required Skills and Expectations:Candidates should have a basic understanding of aircraft systems and engineering principles, ideally acquired through vocational training or relevant certifications. You should be detail-oriented, with strong problem-solving skills to address technical challenges effectively. Good communication and teamwork abilities are essential, as you will often collaborate with other professionals. A commitment to safety and adherence to strict aviation regulations is critical in this role. The job may require a willingness to work different hours, depending on operational needs. Being proactive in learning and adapting to new technologies will also be highly valued.

We are seeking an Aircraft Engineer to ensure aircraft safety and efficiency. This is a full-time position based in Kolkata, ideal for both fresh graduates and individuals with up to six years of experience.Key Responsibilities:- Perform Inspections: Regularly inspect aircraft components and systems to ensure they meet safety and quality standards.- Conduct Maintenance: Carry out preventive and corrective maintenance on aircraft to maintain optimal performance and reliability.- Troubleshoot Issues: Identify and diagnose mechanical and electrical problems using specialized equipment and tools to ensure quick resolutions.- Document Work: Maintain accurate records of repairs, maintenance, and inspections performed on aircraft for regulatory compliance.- Collaborate with Teams: Work alongside pilots, technicians, and other engineers to ensure that all aircraft systems operate safely and effectively.Required Skills and Expectations:Candidates should have a strong attention to detail and a commitment to safety, as precision is critical in the aviation industry. A basic understanding of aircraft systems and mechanics is essential. Candidates must possess good problem-solving skills and the ability to work under pressure, as the role can involve urgent repairs. Strong communication skills are necessary to collaborate effectively with team members and report any issues clearly. A minimum educational qualification of a 12th-grade pass is required, and any additional certifications in aviation or mechanical engineering would be advantageous.

As an Aircraft Engineer, you will play a vital role in ensuring the safety and performance of aircraft. Your primary responsibilities will include:- Aircraft Maintenance: Conduct regular inspections and maintenance checks on aircraft to ensure they are safe and fully operational, following industry standards and regulations.- Troubleshooting and Repair: Identify and fix technical issues and malfunctions in aircraft systems, ensuring timely repairs to avoid delays in operations.- Documentation: Maintain accurate records of inspections, repairs, and maintenance activities, which are crucial for compliance and safety audits.- Collaboration: Work closely with other engineers and maintenance staff to share knowledge and improve processes, enhancing overall efficiency in the workplace.- Continuous Learning: Stay updated with industry developments and new technologies related to aircraft systems, ensuring that your skills and knowledge remain relevant.To succeed in this role, you should have:- A background in aviation or engineering, ideally with relevant coursework or training.- Strong problem-solving skills and the ability to think critically under pressure.- Good attention to detail to ensure precision in maintenance and repairs.- Effective communication skills to relay technical information clearly to team members.- A commitment to safety, quality, and adherence to regulatory standards.This role is suitable for individuals with 0 to 6 years of experience who have completed at least their 12th grade education. You will be required to work from the office in Bangalore, collaborating with your team daily.

Job Vacancy: Mechanical EngineerLocations: Singapore New Zealand AzerbaijanSalary: $2,000 $3,000 USD per monthContract Duration: 2-Year Work Permit Visa________________________________________About the Role:We are actively hiring skilled Mechanical Engineers for prominent construction projects in Singapore, New Zealand, and Azerbaijan. This is a prime opportunity to advance your engineering career internationally with excellent remuneration and full support.________________________________________Key Responsibilities: Design, develop, and oversee mechanical systems and equipment for construction projects Ensure compliance with engineering standards, safety regulations, and project requirements Collaborate with multidisciplinary teams to optimize mechanical solutions Monitor project progress, troubleshoot issues, and ensure timely delivery Prepare technical documentation and reports________________________________________Candidate Profile: Proven experience as a Mechanical Engineer, preferably in construction or infrastructure projects Strong knowledge of mechanical systems, design software, and safety protocols Excellent problem-solving, communication, and team collaboration skills Ready and willing to relocate internationally________________________________________Benefits Provided by the Company: Flight ticket included 2-year work permit visa provided Comprehensive medical insurance Free food and accommodation Visa and biometric expenses covered Minimal service charge with no hidden fees________________________________________Office Location for Application & Processing:AL HUDA MANPOWERKolkata, West Bengal________________________________________How to Apply:Interested candidates should send their updated resume and contact details to:AL HUDA MANPOWERKolkata, West Bengal________________________________________Seize this opportunity to elevate your career globally with full company support. Apply today!

As a Mechanical Engineer, you will be involved in the design, analysis, and improvement of mechanical systems. You will work in a collaborative environment, contributing to various projects in Germany, Sweden, and the Netherlands.Key Responsibilities:- Design Engineering: Create detailed designs for mechanical systems and components using CAD software. This includes developing specifications and ensuring designs meet project requirements.- Testing and Evaluation: Conduct testing on prototypes to assess their performance and efficiency. This involves analyzing results and making necessary adjustments to improve designs.- Project Collaboration: Work closely with cross-functional teams, including electrical engineers and product managers, to ensure seamless integration of all system components.- Problem Solving: Identify and troubleshoot issues in existing mechanical systems. Use analytical skills to develop effective solutions to enhance system performance.- Documentation: Maintain accurate documentation of design processes, changes, and test results. This ensures project transparency and compliance with industry standards.Required Skills and Expectations:You should have a Bachelors degree in Mechanical Engineering or a related field. Strong problem-solving abilities and analytical thinking are essential for this role. Proficiency in CAD software is important for design tasks. Good communication skills will help you collaborate effectively with team members. A foundational understanding of mechanical systems and a willingness to learn is expected. You should also be capable of working independently and managing your time efficiently to meet project deadlines.

Maintenance engineers work involves checking, repairing and servicing machinery, equipment, systems and infrastructures. Maintenance engineers ensure that industrial machinery and equipment runs smoothlyExperience0 - 9 YearsNo. of Openings50EducationAny Bachelor Degree, Post Graduate DiplomaRoleMechanical Maintenance EngineerIndustry TypeEngineering / Cement / MetalsGender[ Male / Female ]Type of JobFull TimeWork Location TypeWork from Office

Major Responsibilities Planned and executed preventive and corrective maintenance activities for mechanical equipment.Diagnosed mechanical faults and performed troubleshooting to minimize downtime.Inspected, repaired, and maintained industrial machinery and plant equipment.Monitored equipment performance and implemented reliability improvement measures.Conducted root cause analysis (RCA) of equipment failures and breakdowns.Managed maintenance schedules, work orders, and technical documentation.Supervised installation, commissioning, and testing of mechanical systems.Maintained hydraulic, pneumatic, pumps, compressors, and rotating equipment.Ensured compliance with safety, environmental, and quality standards.Coordinated with production and engineering teams to ensure smooth operations.Managed spare parts inventory and maintenance resources effectively.Supported continuous improvement initiatives to enhance equipment efficiency and productivity.

An Aircraft Maintenance Engineer (AME) is responsible for inspecting, maintaining, repairing, troubleshooting, and certifying aircraft to ensure they are safe, airworthy, and compliant with aviation regulations. The role involves carrying out scheduled and unscheduled maintenance on aircraft systems, engines, avionics, electrical components, hydraulic systems, landing gear, and structural components while adhering to the standards established by aviation authorities.Key ResponsibilitiesAircraft Inspection & MaintenancePerform routine, preventive, scheduled, and unscheduled aircraft maintenance.Conduct daily, transit, weekly, A-check, B-check, C-check, and heavy maintenance inspections.Inspect aircraft structures, fuselage, wings, landing gear, flight controls, and engines.Diagnose and rectify aircraft defects using approved maintenance procedures.Replace, repair, and overhaul defective aircraft components.Ensure all maintenance tasks are completed according to the Aircraft Maintenance Manual (AMM).Troubleshooting & RepairsIdentify mechanical, hydraulic, electrical, pneumatic, and avionics faults.Use specialized diagnostic tools and testing equipment.Repair aircraft systems while maintaining manufacturer specifications.Coordinate with engineering teams for complex technical issues.Perform functional tests after repairs to verify serviceability.Engine & Component MaintenanceInspect aircraft engines for wear, leaks, corrosion, and damage.Perform engine servicing, oil changes, filter replacement, and component inspections.Maintain propellers, Auxiliary Power Units (APU), and fuel systems.Monitor engine performance and recommend corrective actions.Avionics & Electrical SystemsInspect communication and navigation systems.Maintain radar, autopilot, cockpit instrumentation, and electrical wiring.Test aircraft electronic systems for operational reliability.Ensure compliance with avionics maintenance procedures.Documentation & ComplianceComplete maintenance logs, inspection reports, and defect records.Maintain aircraft technical documentation accurately.Ensure compliance with aviation regulatory authorities.Certify aircraft for return to service after maintenance (where appropriately licensed).Follow company maintenance policies and quality assurance procedures.Safety & Quality AssuranceFollow all aviation safety regulations and standard operating procedures.Maintain clean and organized work areas.Ensure proper use of Personal Protective Equipment (PPE).Report safety hazards and technical discrepancies immediately.Participate in safety audits and quality inspections.Team CoordinationWork closely with pilots, technicians, quality inspectors, and operations staff.Coordinate maintenance schedules with flight operations.Assist junior technicians with technical guidance and training.Participate in emergency aircraft recovery and AOG (Aircraft on Ground) support.Required QualificationsDiploma or Bachelor's Degree in Aircraft Maintenance Engineering, Aeronautical Engineering, Mechanical Engineering, or Aerospace Engineering.DGCA-approved AME qualification or equivalent aviation authority certification is preferred.Valid Aircraft Maintenance Engineer License (where applicable).Type rating on specific aircraft is an advantage.Relevant experience in aircraft maintenance is preferred.Required SkillsStrong knowledge of aircraft systems and maintenance procedures.Excellent troubleshooting and fault diagnosis skills.Knowledge of aviation regulations and airworthiness standards.Ability to interpret aircraft maintenance manuals and engineering drawings.Strong analytical and problem-solving abilities.Excellent attention to detail.Good communication and teamwork skills.Ability to work under pressure and meet strict deadlines.Computer proficiency in maintenance management software.Good technical documentation skills.Technical KnowledgeAircraft StructuresGas Turbine EnginesHydraulic SystemsPneumatic SystemsElectrical SystemsAvionics SystemsFlight Control SystemsLanding Gear SystemsFuel SystemsAircraft DocumentationMaintenance PlanningAircraft Safety StandardsPreferred CertificationsDGCA Aircraft Maintenance Engineer LicenseEASA Part-66 License (preferred internationally)ICAO-compliant aviation trainingHuman Factors TrainingSafety Management System (SMS) TrainingFuel Tank Safety TrainingEWIS (Electrical Wiring Interconnection System) TrainingAircraft Type Rating CertificationWorking ConditionsAirport hangars, maintenance bases, and line maintenance stations.Rotational shifts including nights, weekends, and public holidays.Outdoor work in varying weather conditions.Physically demanding work involving standing, climbing, bending, and lifting equipment.Exposure to aircraft noise, fuels, lubricants, and hydraulic fluids while following strict safety procedures.Salary Range (India)Fresher: 3.5 - 6 LPA2-5 Years: 6 - 10 LPA5-10 Years: 10 - 18 LPALicensed/Type-Rated AME: 15 - 30+ LPA (depending on airline, aircraft type, and experience)

An Aircraft Maintenance Engineer (AME) is responsible for inspecting, maintaining, repairing, troubleshooting, and certifying aircraft to ensure they are safe, airworthy, and compliant with aviation regulations. The role involves carrying out scheduled and unscheduled maintenance on aircraft systems, engines, avionics, electrical components, hydraulic systems, landing gear, and structural components while adhering to the standards established by aviation authorities.Key ResponsibilitiesAircraft Inspection & MaintenancePerform routine, preventive, scheduled, and unscheduled aircraft maintenance.Conduct daily, transit, weekly, A-check, B-check, C-check, and heavy maintenance inspections.Inspect aircraft structures, fuselage, wings, landing gear, flight controls, and engines.Diagnose and rectify aircraft defects using approved maintenance procedures.Replace, repair, and overhaul defective aircraft components.Ensure all maintenance tasks are completed according to the Aircraft Maintenance Manual (AMM).Troubleshooting & RepairsIdentify mechanical, hydraulic, electrical, pneumatic, and avionics faults.Use specialized diagnostic tools and testing equipment.Repair aircraft systems while maintaining manufacturer specifications.Coordinate with engineering teams for complex technical issues.Perform functional tests after repairs to verify serviceability.Engine & Component MaintenanceInspect aircraft engines for wear, leaks, corrosion, and damage.Perform engine servicing, oil changes, filter replacement, and component inspections.Maintain propellers, Auxiliary Power Units (APU), and fuel systems.Monitor engine performance and recommend corrective actions.Avionics & Electrical SystemsInspect communication and navigation systems.Maintain radar, autopilot, cockpit instrumentation, and electrical wiring.Test aircraft electronic systems for operational reliability.Ensure compliance with avionics maintenance procedures.Documentation & ComplianceComplete maintenance logs, inspection reports, and defect records.Maintain aircraft technical documentation accurately.Ensure compliance with aviation regulatory authorities.Certify aircraft for return to service after maintenance (where appropriately licensed).Follow company maintenance policies and quality assurance procedures.Safety & Quality AssuranceFollow all aviation safety regulations and standard operating procedures.Maintain clean and organized work areas.Ensure proper use of Personal Protective Equipment (PPE).Report safety hazards and technical discrepancies immediately.Participate in safety audits and quality inspections.Team CoordinationWork closely with pilots, technicians, quality inspectors, and operations staff.Coordinate maintenance schedules with flight operations.Assist junior technicians with technical guidance and training.Participate in emergency aircraft recovery and AOG (Aircraft on Ground) support.Required QualificationsDiploma or Bachelor's Degree in Aircraft Maintenance Engineering, Aeronautical Engineering, Mechanical Engineering, or Aerospace Engineering.DGCA-approved AME qualification or equivalent aviation authority certification is preferred.Valid Aircraft Maintenance Engineer License (where applicable).Type rating on specific aircraft is an advantage.Relevant experience in aircraft maintenance is preferred.Required SkillsStrong knowledge of aircraft systems and maintenance procedures.Excellent troubleshooting and fault diagnosis skills.Knowledge of aviation regulations and airworthiness standards.Ability to interpret aircraft maintenance manuals and engineering drawings.Strong analytical and problem-solving abilities.Excellent attention to detail.Good communication and teamwork skills.Ability to work under pressure and meet strict deadlines.Computer proficiency in maintenance management software.Good technical documentation skills.Technical KnowledgeAircraft StructuresGas Turbine EnginesHydraulic SystemsPneumatic SystemsElectrical SystemsAvionics SystemsFlight Control SystemsLanding Gear SystemsFuel SystemsAircraft DocumentationMaintenance PlanningAircraft Safety StandardsPreferred CertificationsDGCA Aircraft Maintenance Engineer LicenseEASA Part-66 License (preferred internationally)ICAO-compliant aviation trainingHuman Factors TrainingSafety Management System (SMS) TrainingFuel Tank Safety TrainingEWIS (Electrical Wiring Interconnection System) TrainingAircraft Type Rating CertificationWorking ConditionsAirport hangars, maintenance bases, and line maintenance stations.Rotational shifts including nights, weekends, and public holidays.Outdoor work in varying weather conditions.Physically demanding work involving standing, climbing, bending, and lifting equipment.Exposure to aircraft noise, fuels, lubricants, and hydraulic fluids while following strict safety procedures.Salary Range (India)Fresher: 3.5 - 6 LPA2-5 Years: 6 - 10 LPA5-10 Years: 10 - 18 LPALicensed/Type-Rated AME: 15 - 30+ LPA (depending on airline, aircraft type, and experience)

We are looking for an Aircraft Maintenance Engineer to join our team in Surat. This position requires an individual with a keen eye for detail and a passion for aviation.Key Responsibilities:- Conduct Inspections: Regularly check aircraft systems and components to ensure they meet safety and performance standards.- Perform Maintenance: Execute scheduled maintenance tasks and repairs on aircraft, ensuring all work is compliant with regulations and procedures.- Troubleshoot Issues: Identify and diagnose potential problems in aircraft systems and components, applying effective solutions to ensure operational safety.- Keep Records: Maintain accurate documentation of inspections, maintenance, and repairs performed on each aircraft to comply with regulatory standards.- Collaborate with Teams: Work closely with pilots, ground crew, and other engineers to communicate needs and ensure the aircraft are ready for operation.Required Skills and Expectations:The ideal candidate should have a strong understanding of aircraft systems and maintenance procedures, along with problem-solving abilities. Good communication skills are essential for working with a team in a collaborative environment. A genuine interest in aviation technology and safety practices is crucial. Since this is an entry-level position, we welcome applications from recent graduates or individuals with up to six years of experience. Candidates should have at least completed their 12th grade education. A proactive attitude towards learning and adapting to new challenges in the aviation sector is expected.

We are looking for an Aircraft Maintenance Engineer to join our team in Kochi. As an Aircraft Maintenance Engineer, you will play a crucial role in ensuring the safety and efficiency of our aircraft through regular inspections and repairs. Your primary responsibilities will include:- Conducting Inspections: Perform routine and non-routine inspections of aircraft to identify potential problems, ensuring compliance with safety standards and regulations.- Carrying Out Repairs: Diagnose mechanical issues and carry out necessary repairs on aircraft systems, including engines, avionics, and airframe components.- Maintaining Records: Document all maintenance activities, including inspections and repairs, to ensure accurate and up-to-date maintenance logs and compliance with industry regulations.- Collaborating with Team Members: Work closely with other maintenance staff and engineers to ensure timely completion of maintenance tasks and coordination of schedules.- Staying Informed: Keep yourself updated with the latest aviation regulations, techniques, and technologies to improve personal skills and enhance overall maintenance practices.To be successful in this role, you should have a solid understanding of aviation principles and aircraft systems. Strong problem-solving skills and attention to detail are essential. You should also have excellent communication skills to collaborate effectively with team members and report findings accurately. A valid Aircraft Maintenance Engineer license or certification is preferred, though not mandatory for entry-level applicants. Being a team player with a safety-first mindset is crucial for this position.

As an Aircraft Maintenance Engineer, you will play a crucial role in ensuring the safety and efficiency of aircraft. Your primary responsibilities will include:- Conducting Inspections: Regularly check aircraft to ensure they are in proper working condition. This involves identifying any mechanical issues and verifying compliance with safety regulations.- Performing Repairs: Fix any faults discovered during inspections or reported by the flight crew. This can include everything from minor adjustments to major repairs on engines or electrical systems.- Maintaining Records: Keep detailed records of all maintenance work done on aircraft. Accurate documentation is essential for safety audits and regulatory compliance.- Collaborating with Team Members: Work closely with other engineers and technicians to handle repairs and maintenance effectively. Good communication is vital for a cohesive working environment.- Staying Updated on Technology: Keep up with the latest in aviation technology and maintenance practices. Continuous learning ensures you are equipped to handle new aircraft systems and technologies.To be successful in this role, you should have strong technical skills and a good understanding of aircraft systems. Attention to detail is crucial, as even minor oversights can lead to significant safety risks. Good problem-solving skills will help you tackle complex maintenance issues effectively. You should also demonstrate a commitment to safety and adhere strictly to regulatory standards. Open communication and teamwork abilities are essential to work effectively in a collaborative environment.

As an Aircraft Maintenance Technician in Thiruvananthapuram, you will be responsible for ensuring that aircraft are safe and ready for flight. Your key responsibilities include:- Performing Inspections: You will conduct routine and detailed inspections of aircraft to identify any issues or required maintenance. This ensures that all parts are functioning properly.- Conducting Repairs: When problems are found, you will be responsible for making necessary repairs. This may involve fixing mechanical issues or replacing parts to keep the aircraft in good condition.- Maintaining Records: You will document all maintenance work and repairs performed on aircraft. Keeping accurate records is essential for safety compliance and tracking maintenance history.- Collaborating with Team Members: You will work closely with other technicians and engineers to resolve complex issues and share knowledge. Teamwork is important to ensure efficient and effective maintenance.- Adhering to Safety Standards: You must follow all safety regulations and protocols during maintenance work. Ensuring safety not only protects you but also all aircraft personnel and passengers.To be successful in this role, you should have a strong understanding of aircraft systems and mechanics. Attention to detail is critical, as even small mistakes can have serious consequences. Good communication skills will help you work well in a team. Lastly, you should be willing to learn and adapt, as technology in aviation is always advancing.