Mechanical Maintenance Engineer Jobs

Operate and monitor steam boilers for precast concrete curing. Maintain steam pressure, temperature, water levels & fuel supply. Inspect burners, pumps, valves, pipelines and equipment. Perform routine cleaning, servicing and minor maintenance. Maintain boiler logbooks and operational records.

Maintenance Incharge Job DescriptionA Maintenance In-charge (often Called a Maintenance Manager or Supervisor) Oversees the Daily Repair, Upkeep, and Reliability of An Organization's Facilities, Machinery, and Equipment to Prevent Unexpected Downtime.Core Roles and Responsibilities Operations & Scheduling:O Design and Execute Proactive Maintenance Plans, Including Preventive and Predictive Maintenance Schedules.O Coordinate Emergency and Routine Repairs for Mechanical, Electrical, Plumbing, and Utility SystemO We Handle Machine Installation and Project When a Machine Break Down Occurs We Note Down the Machine Error Share It with the Service Engineer and Coordinate with to Resolve the Issue.O We Create Iso Documentation for Maintenance.O Coordinate to all Department (store Purchase, Production Engineering Team, Hr , Solar and Md Sir. )O Maintain the Maintenance Critical Spare Item.O Machine Breakdowns Attend. ( Cnc , Vmc, Shot Blasting Cooling Tower , Forging Press , Power Press , Compressor , Generator , and also Small Machine )O Electric and Electronic Breakdown Work.O Manages Consumable Item Inventory.O Team Leadership:O Supervise, and Evaluate Maintenance Technicians, Staff, and ContractorsO Team Handling and Team Work Supported SafetyO Enforce Health, Safety, and Environmental Regulations. Look At Machine Safety and E Work Safety as Par StanderO Budget & Inventory Management:O Track Maintenance Expenditures, Manage Department Budgets, and Find Cost-saving Opportunity Vendor & Project Oversight:O Source, Evaluate, and Manage External Contractors and Service Providers for Specialized Projects.O Assist in Facility Renovations, Equipment Upgrades, and Infrastructure Planning

Job Profile:a) Summary: Required Executive Mechanical with experience of 5 to 8 Years. b) Job Responsibilities: 1) Should have experience of positive displacement pump as well as Rotary pump, Axial flow pump, Centrifugal pump, magnetic drive pump etc. 2) Should have knowledge of mechanical seal of pump and agitator.3) Should have worked in plant like Hydrogenation, MEE, Spray dryer etc.4) Need to procure spares keeping min inventory and avoid stoppage of equipment. 5) Should able to find root cause of critical or frequent failure of equipment. 6) Should adopt/aware of best maintenance practice to avoid/reduce breakdown.7) Should able to maintain data for equipment trouble shooting like History card, service report etc.8) Should able to guide technician to improve maintenance practice.9) Should have knowledge of different MOC like 304,316,316Ti. c) Required Skills/Certifications: NAd) Other Requirements: Shall have worked in Chemical/Dyes/Mechanical Industry/company in engineering department. Shall be able to lead a team of Technicians and manage shift. e) Employee Benefits: PF, Gratuity, Bonus, Free Transportation, Free Canteen, Mediclaim (For full Family), Referral Benefits and Monthly Performance Incentive.

focus on equipment reliability, preventive maintenance, safety compliance, team and budget management, and performance reporting. Equipment MaintenanceEnsuring all mechanical equipment is properly maintained to minimize downtime and maximize operational efficiency. This includes routine inspections, lubrication, and calibration of machinery to maintain optimal performanceTroubleshooting and RepairsIdentifying and resolving mechanical issues promptly to ensure continuous operation. Engineers are responsible for diagnosing faults, performing repairs, and restoring equipment functionality efficientlyPreventive Maintenance PlanningDeveloping and implementing preventive maintenance schedules to prolong equipment lifespan and prevent unexpected breakdowns. This involves planning maintenance activities based on manufacturer recommendations and operational dataSafety ComplianceEnsuring all maintenance activities adhere to safety regulations and guidelines. This includes enforcing safe work practices, conducting risk assessments, and maintaining a safe working environment during maintenance tasks

We are looking for an Executive Mechanical Maintenance professional to join our team in Hosur, Krishnagiri. This position is ideal for individuals with 2 to 5 years of experience in mechanical maintenance and relevant educational qualifications.nnKey Responsibilities:nn1. Maintenance Operations: Oversee and perform mechanical maintenance tasks to ensure all machinery operates efficiently. You will troubleshoot mechanical issues and implement solutions to prevent breakdowns.nn2. Inspection and Monitoring: Conduct regular inspections of mechanical systems and equipment. Monitoring performance will help identify areas for improvement and ensure compliance with safety standards.nn3. Testing and Repairs: Execute tests and repairs on mechanical equipment to guarantee reliability and safety. You will be responsible for restoring equipment functionality in a timely manner and documenting all repairs performed.nn4. Collaborating with Teams: Work closely with other teams to coordinate maintenance schedules and minimize disruptions to operations. Communication will be key in maintaining a smooth workflow.nnRequired Skills and Expectations:nnCandidates must possess a degree in mechanical engineering or a related field. You should have proven experience in mechanical maintenance, demonstrating strong troubleshooting and problem-solving skills. Attention to detail, the ability to work in a fast-paced environment, and effective communication skills are essential. A proactive approach and the ability to work as part of a team while meeting deadlines will be critical for your success in this role.

Key ResponsibilitiesHandle mechanical maintenance activities in the Steel Melting Shop (SMS).Perform preventive and breakdown maintenance of mechanical equipment.Monitor equipment performance and identify mechanical issues.Coordinate with production and maintenance teams to minimize equipment downtime.Conduct inspection, troubleshooting, and repair of plant machinery.Ensure proper maintenance schedules are followed.Maintain safety and quality standards during maintenance activities.Support continuous improvement and reliability of mechanical equipment.Key Skills:Mechanical Maintenance, Steel Plant Maintenance, SMS, Steel Melting Shop, Preventive Maintenance, Breakdown Maintenance, Mechanical Engineering, Industrial Maintenance, Iron & Steel Industry

100 NOS MECHANICAL MILL WRITE FITTER REQUIRED FOR HAZIRA WITH GOOD KNOWLEDGE OF ROTARY EQUIPMENTS AND ALL.

Position: Mechanical EngineerWork Experience: 5+ years as a Maintenance Engineer in Chemical/Agro-Chem onlyOther Industries Candidate Do not applyMandatory RequirementMust have minimum 5+ years of experience in Chemical (Preferably Agro Chemical). No other industry preferred.Excellent understanding of drawings: Isometric, Structure Drawings, P&ID, Civil drawingsExcellent understanding of Static (Tanks, Vessels, Reactors, Column, HE, etc) & Rotary (Centrifugal Pump, Vacuum Pump, etc) Equipment.Knowledge of Lifting / Shifting / Erection of EquipmentsKnowledge of Pumps, Valves. Types & classification. Able to read Pump graphs.Knowledge of International/National standards, ASME, ASTM, API, TEMA, ANSI etc.Basic knowledge of Civil, Electrical, Instrument.Must have ownership mindset.1. Maintenance ManagementPlan, execute, and monitor Preventive Maintenance (PM) schedules.Carry out Predictive Maintenance (PdM) activities including vibration analysis, thermography, and condition monitoring.Attend breakdowns and restore equipment within minimum downtime.Maintain history records of equipment maintenance.2. Equipment ReliabilityResponsible for improving reliability and maintenance of GLR, SS reactor, Centrifugal Pumps, Mag Drive pumps, Blowers, Positive Displacement Pumps, Storage tanks, vacuum Pumps, Mechanical Seal replacement, Gearbox, ANFD, Hydraulic Systems, Heat Exhangers, etc.3. Shutdown PlanningPrepare shutdown schedules.Estimate manpower requirements.Arrange spare parts and consumables.Coordinate with Production, Instrumentation, Electrical, Civil and Safety departments.Ensure shutdown completion within planned duration.4. Spare Parts ManagementIdentify critical spares.Maintain minimum inventory levels.Prepare technical specifications.Verify material quality during receipt.Coordinate procurement activities.Optimize inventory without affecting reliability.5. Contractor ManagementSupervise maintenance contractors.Verify work quality.Ensure compliance with plant safety rules.Certify work completion.Evaluate contractor performance.6. Safety ResponsibilitiesEnsure compliance with Permit to Work (PTW) system.Conduct Job Safety Analysis (JSA).Follow Lockout-Tagout (LOTO) procedures.Ensure use of appropriate PPE.Participate in safety audits.Identify and eliminate unsafe conditions.Report incidents and near misses.Support Process Safety Management (PSM) initiatives.7. Statutory ComplianceEnsure compliance with applicable regulations and standards, including:Factory Safety RulesPressure Vessel Inspection RequirementsPESO Guidelines (where applicable)Plant Engineering Standards8. DocumentationMaintain:Maintenance HistoryBreakdown ReportsPM ChecklistsEquipment LogbooksInspection ReportsShutdown ReportsCalibration Records (mechanical)Spare Parts RecordsMaintenance SOPsEquipment DrawingsTechnical Manuals11. Cost ControlMonitor maintenance expenditure.Reduce maintenance costs without compromising safety.Improve equipment life.Minimize spare consumption.Optimize contractor costs.12. Continuous ImprovementParticipate in Kaizen activities.Implement 5S practices.Identify energy-saving opportunities.Recommend plant modifications.Improve equipment efficiency.Participate in CAPEX projects.13. Cross-functional CoordinationCoordinate with Production, Safety, Electrical, Instrumentation, Civil, Utility, Purchase, stores, QC Department & External vendorsRequired QualificationsBachelor's Degree in Mechanical Engineering (B.E./B.Tech)Technical SkillsRotating Equipment MaintenanceStatic Equipment MaintenancePump AlignmentLaser AlignmentMechanical Seal MaintenanceBearing MaintenanceLubrication ManagementPipe Stress BasicsWelding & FabricationHydraulic SystemsPneumatic SystemsRoot Cause Analysis (RCA)SAP PM / CMMSAutoCAD (basic)MS Office- Excel, Word, PaintBehavioural CompetenciesPositive approach, Problem Solving, Analytical Thinking, Leadership, Decision Making, Communication Skills, Teamwork, Planning & Organizing, Time Management, Accountability, Continuous Learning, Safety Mindset, Adaptability.Working ConditionsRotational shifts as per plant requirements.Availability during emergencies and plant shutdowns.Work in process areas, utilities, and maintenance workshops.Exposure to outdoor environments, noise, heat, and chemicals while using prescribed PPE.If you interested, Share me your CV at.hrcps9@gmail.com8370014003

ITI /Diploma Mechanical - Manesar,GurgaonJob descriptionHandling Grinding machinePrecision work knowledgelathe machine KnowledgeQuality InstrumentsOverseas Travel for client sites on regular basismachinistRequired Candidate profileITI or diploma mechanical.If you are interested so please share me your cv atcapitalplacement111@gmail.com8370014003

Perform preventive and breakdown maintenance of mechanical equipment. Identify and troubleshoot mechanical faults to minimize downtime. Ensure smooth and efficient operation of machinery. Conduct regular equipment inspections. Maintain maintenance records and follow safety standards. Coordinate with the team to ensure reliable equipment performance.

Key ResponsibilitiesProduct Design & Development: Conceptualize, design, and detail mechanical parts, mechanisms, and assemblies using 3D CAD software (e.g., SolidWorks, Creo, CATIA, or AutoCAD).Prototyping & Testing: Build functional prototypes, define test plans, and conduct rigorous validation and durability testing to ensure designs meet performance, safety, and reliability standards.Engineering Analysis: Perform structural, thermal, and kinematic analyses (using hand calculations or FEA/CFD simulation tools) to optimize designs for weight, strength, and cost.Design for Manufacturing (DFM/DFA): Collaborate with manufacturing partners and suppliers to ensure designs are optimized for mass production, assembly efficiency, and cost reduction.Documentation: Create and maintain comprehensive engineering documentation, including 2D manufacturing drawings, Bill of Materials (BOMs), assembly instructions, and Engineering Change Orders (ECOs).Cross-Functional Collaboration: Work alongside electrical, firmware, quality assurance, and project management teams to resolve technical challenges throughout the product lifecycle.

Key Responsibilities & DutiesTechnical Support & Operational Execution:Assist senior engineers in day-to-day shop-floor manufacturing, site operations, machinery setup, or chemical process monitoring.Prepare and update basic technical documentation, standard operating procedures (SOPs), production logbooks, and inspection reports.Perform quality checks, dimensional measurements using precision instruments (verniers, micrometers, gauges), or raw material sampling.Design, Drafting & Process Monitoring:Support engineering teams with basic 2D drafting, 3D CAD modeling updates, Bill of Materials (BOM) creation, or process flowcharts under supervision.Monitor equipment performance, record operational parameters, and report line breakdowns or process deviations promptly.Quality Control & Preventive Maintenance:Participate in 5S maintenance, Root Cause Analysis (RCA), and quality defect logging (8D/Kaizen activities).Assist maintenance personnel in carrying out routine preventive maintenance schedules for machines, tooling, or plant utilities.Safety & Compliance:Strictly follow plant safety guidelines, personal protective equipment (PPE) protocols, and environmental health and safety (EHS) policies.Attend all assigned technical training modules, safety drills, and skill development workshops.

Key ResponsibilitiesPerform preventive, predictive, and corrective maintenance activities on plant machinery and equipment.Diagnose and troubleshoot electrical, mechanical, hydraulic, and pneumatic system faults.Minimize machine downtime through effective maintenance planning and execution.Monitor equipment performance and recommend improvements to enhance reliability and efficiency.Coordinate with production teams to ensure smooth plant operations.Maintain maintenance records, reports, and equipment history logs.Ensure compliance with safety, environmental, and quality standards.Participate in installation, commissioning, and testing of new equipment.Manage spare parts inventory and coordinate with vendors for maintenance requirements.Implement continuous improvement initiatives to reduce maintenance costs and improve equipment effectiveness.