Maintenance PLC Jobs

Job title- PLC ProgrammerLocation: Delhi NCR / GhaziabadExperience: 2-5 YearsRoles & ResponsibilitiesUnderstand and analyze clients' electrical and mechanical automation requirements.Develop and modify PLC programs based on machine and process requirements.Read, interpret, and understand logical flow diagrams, electrical drawings, and control schematics.Design and prepare 2D/3D drawings and layouts as required for automation projects.Develop and test PLC programs using automation equipment to ensure reliable and safe operation.Perform PLC troubleshooting, fault diagnosis, and corrective actions during machine operation and commissioning.Supervise and support the installation, commissioning, and integration of PLC-based systems at client sites.Modify, maintain, and optimize existing PLC programs as per machine requirements.Coordinate with Electrical, Mechanical, Engineering, and Production teams for smooth project execution.Support machine testing, trial runs, commissioning, and performance verification.Identify automation-related issues and provide effective technical solutions.Maintain proper documentation of PLC programs, modifications, and project-related technical details.Qualification & SkillsB.E./B.Tech in Electrical EngineeringStrong hands-on experience in PLC Programming and Industrial Automation.Good understanding of PLC logic, control systems, and automation processes.Ability to read and interpret electrical/control drawings and logical flow diagrams.Experience in PLC troubleshooting and commissioning.Good understanding of electrical and mechanical machine interfaces.Willingness to travel to client sites whenever required.

Key ResponsibilitiesDesign, develop, and implement electrical systems, circuits, and control panels.Prepare electrical schematics, wiring diagrams, layouts, and technical documentation.Perform electrical calculations, load analysis, and system sizing.Conduct testing, commissioning, troubleshooting, and maintenance of electrical equipment.Coordinate with mechanical, production, quality, and project teams to ensure successful project completion.Ensure compliance with electrical codes, safety regulations, and industry standards.Assist in vendor evaluation, equipment selection, and technical procurement activities.Analyze and resolve electrical faults and system performance issues.Monitor project progress and provide technical support throughout the project lifecycle.Prepare project reports, maintenance records, and engineering documentation.

WE'RE HIRING ELECTRICIAN - MACHINE & EQUIPMENT MAINTENANCE Looking for your next career opportunity in Rajkot? This could be the right role for you!We are hiring an Electrician for Preventive & Breakdown Maintenance of machines and equipment. Location: Ribda, Rajkot Qualification: ITI / DEE Experience: 3-4 Years in Maintenance Rajkot local candidates can applyIf you have the right skills and maintenance experience, don't miss this opportunity! Apply: applydestinycareers@gmail.com Call/WhatsApp: 7487877372

Service Engineer - Automation Industrial AutomationExperience: 6-9 YearsLocation: PuneHiring Company: Talent Zone ConsultantBrief JD:We are hiring a Service Engineer - Automation with strong experience in industrial automation equipment and control systems. The role involves installation, commissioning, troubleshooting, preventive maintenance and providing technical support to customers at site.Key Responsibilities:Install, commission and service automation systems.Troubleshoot PLC, HMI, VFD, servo and control system issues.Conduct preventive and corrective maintenance.Provide onsite technical support and resolve customer issues.Coordinate with engineering and project teams.Prepare service reports and technical documentation.Travel to customer sites as required.Relevant Skillset:Industrial Automation, Service Engineering, PLC, HMI, VFD, Servo, SCADA, Sensors, Control Systems, Electrical Troubleshooting, Installation, Commissioning, Preventive Maintenance, Field Service, Customer Support

Job Description:We are seeking a electrical automation engineer for our product development department, the ideal candidate should have hands on experience in designing and developing electrical systems like component selection, control panel, testing and product validation that form the foundation of physical automation machinery.Key Responsibilities:Design and develop electrical systems, wiring diagrams and control schematics for the product.Knowledge of electrical components such as contractors,relays,mcbs,sensors, Plc,HMI systems.Knowledge of load calculations and size of cable, single line drawing on AutoCAD.Hands of experience on beckhoff software for PLC programming.Hands of experience on software programming, testing, integration and troubleshooting process also.Candidates from product based company or Automation company are eligible.Btech - Electrical candidates, Immediate joiners are given preference.

We are looking for a skilled Maintenance Engineer to join our team in Rajpura. In this role, you will play a key part in ensuring the smooth operation of our facilities and equipment. You should have a diploma in engineering and 3 to 6 years of relevant experience.Key Responsibilities:- Conduct Regular Maintenance: Perform scheduled inspections and maintenance on equipment to prevent breakdowns and extend the life of machinery.- Troubleshoot Issues: Diagnose equipment faults quickly and effectively to minimize downtime and ensure production efficiency.- Implement Upgrades: Identify opportunities for improvement and assist in the installation of upgrades or new systems to enhance performance.- Maintain Documentation: Keep accurate records of maintenance work, repairs, and inspections to ensure compliance with company standards.- Coordinate with Teams: Work closely with production and safety teams to ensure all maintenance activities are carried out in harmony with operational procedures.Required Skills and Expectations:Candidates should have strong problem-solving skills and the ability to work independently as well as part of a team. A solid understanding of mechanical and electrical systems is essential. You should also be comfortable using various tools and diagnostic equipment. Strong communication skills are important for collaborating with colleagues and reporting issues clearly. A proactive attitude towards safety and quality standards is expected, along with a commitment to continuous learning and improvement in engineering practices.

BMS Engineer - Urgent HiringTechnicom Engineers Network is looking for an experienced and technically skilled BMS Engineer to join our team. The candidate will be responsible for handling Building Management System (BMS), Building Automation and HVAC control systems across our projects.Key Responsibilities* Installation, testing and commissioning of BMS and Building Automation systems.* Configuration and monitoring of BMS systems and controllers.* Handling HVAC control systems, sensors, actuators and DDC controllers.* Troubleshooting BMS, HVAC control and communication-related issues.* Carrying out preventive and corrective maintenance of BMS systems.* Working with communication protocols such as BACnet and Modbus.* Coordinating with electrical, HVAC, project and site teams for smooth project execution.* Performing system testing, integration and commissioning at project sites.* Preparing site reports, testing/commissioning documents and other technical records.* Identifying faults and providing appropriate technical solutions.* Ensuring project work is completed according to required quality and safety standards.* Willingness to travel to project sites as required.Required Skills* Strong knowledge of BMS / Building Management Systems.* Hands-on experience in Building Automation.* Knowledge of HVAC Controls and DDC.* Experience in BMS installation, commissioning and troubleshooting.* Knowledge of BACnet / Modbus.* Understanding of sensors, actuators, controllers and BMS panels.* Knowledge of PLC/SCADA will be an added advantage.* Good technical, communication and coordination skills.* Ability to work independently as well as with project/site teams.Educational QualificationDiploma / B.E. / B.Tech in Electrical, Electronics, Instrumentation, Mechanical Engineering or a related field.Experience3-4+ years of relevant hands-on experience in BMS / Building Automation / HVAC Controls is preferred.Candidates with experience in BMS platforms such as Siemens, Schneider, Honeywell, Johnson Controls, Delta, Trane or other similar systems will be preferred.

Production Technician- Hyderabad Location: Hyderabad Salary: Negotiable Job Type: Full-Time Freshers & Experienced Candidates Can ApplyEligibility ITI (All Trades) Diploma (Mechanical, Electrical, Electronics, ECE, Instrumentation & Related Branches)Job DescriptionWe are looking for dedicated and technically skilled Technicians to join our manufacturing team. The ideal candidate will be responsible for operating, maintaining, and troubleshooting equipment while ensuring smooth production operations. Freshers and experienced candidates are welcome to apply.Key Responsibilities Operate and monitor production machinery and equipment Perform routine maintenance and basic repairs Troubleshoot equipment and process-related issues Follow safety guidelines and company procedures Assist in production and manufacturing activities Conduct equipment inspections and report abnormalities Maintain records of maintenance and production activities Ensure workplace cleanliness and organization Support quality standards and compliance requirements Work effectively with team members to achieve production targetsDesired Skills Machine Operation Preventive Maintenance Troubleshooting Skills Equipment Handling Technical Knowledge Safety Awareness Quality Inspection Problem Solving Skills Teamwork and Communication Time Management

Junior Electrical Engineer - Engineering & Manufacturing Company (Gurugram)Experience: 1-2 Years Location: Gurugram Budget: 20,000-25,000 per monthAbout the Role: A reputed Engineering & Manufacturing company in Gurugram is seeking a young and dynamic Electrical Engineer to assist the Technical Head in daily operations and project execution. This role offers hands-on exposure to electrical systems, design support, and technical coordination within a fast-paced industrial environment.Key Responsibilities: Support the Technical Head in electrical design, maintenance, and project documentation. Assist in troubleshooting and resolving electrical system issues. Conduct basic analysis and prepare reports using MS Office tools. Coordinate with cross-functional teams for smooth project execution. Contribute to process improvements and ensure compliance with safety standards.Candidate Profile: Bachelors degree in Electrical / Electronics Engineering or related field. 1-2 years of relevant experience in electrical systems or manufacturing setups. Strong analytical and problem-solving skills. Effective communication and teamwork abilities. Proficiency in MS Office; basic knowledge of AutoCAD or electrical design tools is an advantage.

Reporting Send to HOD maintenance and utility manager.Maintenance of Electrical panel control & Power CkT.Installation of Electrical Measuring Device for measure the Electrical Quantity.Installation the Electrical protective device to protect the Electrical Equipment.Maintenance and installation the motors & motors starters Dol& star delta starter, electrical fan, lights,Maintenance of the DG set 1250 kva, 625 kva ,1010 kva .Make the schedule, log book & planning of preventive maintenance of electrical equipment.Electrical maintenance in ccm machines continue compress machine. compressor Like as GA 37,GA 90, GA 55+ and GA 55 water and air cool compressor . With air dryer .and chillers works Maintenance of transformer 3000 kva , 33kv to 415 volt . Maintained power factor and control wiring systems knowledge. Make daily power consumption reports and daily breakdown reports .All vfd program upload and download and repair work .working with vfd Abb ,danfoss,allen Bradley ,yaskawa, Omron, delta, Fuji,etc.HMI ,drive ,smps , etc. Electronic equipment normal repair work knowledge. Ammonia screws Compressor, Allen Bradley soft starter, plc Allen Bradley 1400,seimens Equipment trouble shooting with scada. plc must

Electrical Engineer1 Opening Full-Time On-SiteQualification: Diploma / Degree in Electrical EngineeringExperience: 5+ Years in Industrial Automation, PLC & Electrical Systems (No Freshers)About the RoleAs an Electrical Engineer, you will be the primary technical authority for all electrical systems, automation infrastructure, and PLC operations within the plant. You will drive reliability, safety, and efficiency across all electrical assets while supporting production continuity.Key ResponsibilitiesOversee and manage all plant electrical systems including LT panels, MCC, power distribution, and earthingDiagnose and rectify electrical breakdowns promptly to ensure minimal production downtimeMaintain and service motors, control panels, contactors, sensors, relays, and field instrumentsMonitor, maintain, and update PLC programs and SCADA/HMI configurations as neededDevelop, implement, and execute preventive maintenance (PM) schedules for all electrical assetsEnsure full compliance with electrical safety standards, IS codes, and factory regulationsEvaluate new automation technologies and propose system upgrades to improve plant efficiencyPrepare and maintain technical documentation including single-line diagrams, PM logs, and inspection reportsTrain and guide electrical technicians and helpers in safe work practices and equipment handling

Key Responsibilities: Design and develop PLC programs using platforms such as Siemens, Allen-Bradley, Mitsubishi, Schneider Electric, etc. Create and modify HMI (Human-Machine Interface) applications for enhanced user interaction. Integrate PLCs with other devices like sensors, actuators, and SCADA systems. Troubleshoot and optimize control systems to ensure efficiency and reliability. Conduct debugging, testing, and commissioning of automation systems on-site or remotely. Perform regular maintenance, updates, and troubleshooting of existing control systems. Prepare detailed documentation for PLC code, wiring diagrams, system architecture, and user manuals. Maintain a record of program revisions and ensure version control. Coordinate with cross-functional teams to understand project requirements and provide technical expertise. Train and mentor junior programmers and technicians in PLC programming and troubleshooting.

Role Description- Design system architecture- Program PLCs (we work on different stuff, so be ready for that but mostly it will be Siemens) - SCADA design & development - Can cut wires and put them in place, if needed - Read electrical drawings, P&IDs, programs written by other people, and everything else that a programmer needs to - Open to reading 1000 different manuals and making things works - Writing programs from scratch to troubleshooting running machines Qualifications- Degree: Doesnt matter, dont care - Experience: Minimum 3 years of doing all the above will probably qualify you to clear the interview but if youre someone who learnt it all in just 6 months, fine by us! - Skills: Everything that lets you do jobs written above

We are requirement for the position of Electrical EngineerManufacturing Company Must have exp in electricalRequired that electrical license.Collaborate with other departments to ensure seamless project executionSupervise and coordinate electrical work activities to ensure compliance with safety standards and regulations3+ years of exp. in electricalQualification- Diploma or B.E- Electrical Contact person- Deepak- 7757087059

URGENT HIRING - ELECTRICAL ENGINEERS FOR SAUDI ARABIA !!!We are hiring experienced Electrical Engineers for a reputed company in Saudi Arabia. Applications invited from suitable candidatesSalary:3000 - 4000 SAR(Approx. 75,000 - 1,00,000 per month)Eligibility:-----------*Only Saudi-return Electrical Engineers from Tamil Nadu & Kerala*Diploma / BE in Electrical Engineering*Minimum 2 years of Saudi experienceJob Benefits:---------------*8-hour duty + 1 day weekly off*Free accommodation & transportation*Other benefits as per Saudi Labour Law*2-year renewable contract*Age limit: Below 45 yearsSelection Process:Online Interview (Zoom)To Apply share CV to, +91 7402166371 or srcareercv1@gmail.com

Job Title: PLC ProgrammerLocation: Saudi ArabiaIndustry: Water & Wastewater TreatmentCompany ProfileWe are a leading Water & Wastewater Treatment Plant manufacturer and contracting company in Saudi Arabia, providing complete turnkey solutions including design, installation, commissioning, and maintenance. We are actively seeking a qualified and motivated PLC Programmer cum Electrical Technician to join our team on an immediate basis.Position Requirements- Preferred candidates from South India (Tamil Nadu, Kerala, Karnataka, Andhra Pradesh)- Ready to join immediately- Experience in water & wastewater treatment projects is highly preferredKey Responsibilities- PLC programming, troubleshooting, and modification for water treatment systems- Electrical panel wiring, control circuit troubleshooting, and testing- VFD, motor, and instrumentation configuration- Commissioning support for RO, STP, ETP, and desalination plants- Reading and understanding electrical drawings and control logic- On-site maintenance and service support- Coordination with project and operations teamsQualifications & Skills- Diploma / ITI / Engineering in Electrical, Electronics, or related field- Minimum 2-5 years experience in PLC & electrical systems- Knowledge of Siemens / Schneider / Allen Bradley PLCs- Experience with MCC panels, sensors, VFDs, and field instruments- Ability to work independently at project sites- Basic English communication requiredWe Offer- Competitive salary- Accommodation & transportation- Medical insurance- Annual leave & benefits as per Saudi labor lawImmediate requirement - Interested candidates may send CV with expected salary and notice period.

Key ResponsibilitiesPerform preventive, predictive, and corrective maintenance activities on plant machinery and equipment.Diagnose and troubleshoot electrical, mechanical, hydraulic, and pneumatic system faults.Minimize machine downtime through effective maintenance planning and execution.Monitor equipment performance and recommend improvements to enhance reliability and efficiency.Coordinate with production teams to ensure smooth plant operations.Maintain maintenance records, reports, and equipment history logs.Ensure compliance with safety, environmental, and quality standards.Participate in installation, commissioning, and testing of new equipment.Manage spare parts inventory and coordinate with vendors for maintenance requirements.Implement continuous improvement initiatives to reduce maintenance costs and improve equipment effectiveness.

Key ResponsibilitiesDesign, install, test, and maintain electrical systems, equipment, and components.Monitor electrical operations and ensure compliance with safety and quality standards.Perform preventive and corrective maintenance of electrical equipment and machinery.Troubleshoot electrical faults and implement timely solutions to minimize downtime.Prepare electrical drawings, technical specifications, and project documentation.Conduct inspections and electrical testing to ensure operational reliability.Coordinate with production, maintenance, and project teams on electrical requirements.Ensure compliance with statutory regulations, electrical codes, and safety procedures.Support the installation and commissioning of new equipment and systems.Analyze energy consumption and recommend efficiency improvement measures.Manage contractors and vendors involved in electrical projects.Maintain accurate maintenance records, reports, and technical documentation.

Key ResponsibilitiesDevelop and implement preventive and predictive maintenance programs.Inspect, troubleshoot, and repair mechanical, electrical, hydraulic, and pneumatic systems.Monitor equipment performance and identify opportunities for reliability improvements.Respond promptly to equipment breakdowns and minimize production downtime.Coordinate maintenance schedules with operations and production teams.Ensure maintenance activities comply with safety, health, and environmental regulations.Maintain accurate maintenance records, logs, and reports.Manage spare parts inventory and coordinate procurement requirements.Support installation, commissioning, and testing of new equipment and machinery.Conduct root cause analysis and implement corrective actions to prevent recurring failures.Collaborate with vendors and contractors for specialized maintenance work.Contribute to continuous improvement and cost-reduction initiatives.

Seeking an Electrician Maintenance Technician for a contractor position in Udham Singh Nagar, India. Responsibilities include installing, maintaining, and repairing electrical systems and equipment. The ideal candidate should have an I.T.I. education and 1-7 years of experience in the field. Strong knowledge of electrical systems and the ability to troubleshoot and solve problems efficiently are essential. The role requires the ability to work independently and as part of a team, with excellent communication and time management skills.