Fixture Design Jobs

Job description:Job Description - Plumbing Draftsman / Plumbing DrafterPosition: Plumbing Draftsman / Plumbing DrafterDepartment: MEP DesignIndustry: MEP Consulting / EngineeringLocation: BengaluruOpenings: 2Job SummaryWe are looking for skilled Plumbing Draftsmen/Drafters to join our MEP design team. The candidates will be responsible for preparing accurate plumbing drawings, layouts, and documentation for building projects while coordinating with other MEP disciplines and ensuring drawings comply with project requirements and applicable standards.Key ResponsibilitiesPrepare detailed 2D plumbing drawings and layouts using AutoCAD.Develop plumbing layouts for water supply, drainage, soil and waste systems.Prepare sanitary, storm-water and rainwater drainage layouts.Prepare pipe routing, shaft layouts, riser diagrams, and schematic drawings.Develop detailed drawings for plumbing fixtures and equipment.Prepare plumbing drawings based on architectural and engineering requirements.Coordinate plumbing layouts with HVAC, Electrical, Fire Fighting, and Architectural drawings.Identify and resolve clashes and coordination issues before finalizing drawings.Revise drawings based on comments from engineers, clients, and project teams.Prepare detailed sections, elevations, and enlarged layouts wherever required.Maintain proper drawing standards, layers, dimensions, annotations, and drawing revisions.Assist engineers in preparing BOQ, quantity take-offs, and material schedules when required.Ensure drawings are issued within project timelines and maintain proper document control.Coordinate with the site team and incorporate site requirements or approved changes into drawings.Required SkillsStrong knowledge of AutoCAD and plumbing drafting.Good understanding of building plumbing systems.Knowledge of water supply and drainage systems.Ability to read and understand architectural and MEP drawings.Good knowledge of pipe sizes, fittings, plumbing fixtures, and routing.Understanding of plumbing shafts, risers, and service coordination.Knowledge of Revit MEP/BIM will be an added advantage.Good attention to detail and accuracy.Ability to work independently as well as coordinate with the MEP design team.Candidate ProfilePosition 1 - Junior Plumbing DrafterExperience: 1 year of relevant experience.Gender-FemaleFreshers with strong AutoCAD knowledge may also be considered.Good knowledge of basic plumbing drafting and AutoCAD.Should be willing to learn and work closely with senior engineers/drafters.Position 2 - Senior Plumbing DrafterExperience: Approximately 10 years of relevant experience. Gender- MaleStrong experience in building plumbing drafting and MEP coordination.Should be capable of independently handling plumbing drawings for projects.Should have good knowledge of AutoCAD and preferably Revit MEP.Experience coordinating with architects, engineers, and site teams will be preferred.EducationDiploma / ITI / Bachelor's degree in Civil, Mechanical, Plumbing, or a related engineering field is preferred.Key QualitiesStrong technical understanding.Good communication and coordination skills.Ability to meet deadlines.Attention to detail.Problem-solving ability.Team-oriented and professional approach.Note: Candidates should have practical experience in building plumbing drafting and MEP coordination. Experience in large-scale commercial, residential, hospitality, or industrial projects will be an advantage.

Key Responsibilities:Create 3D CNC machining programs using Mastercam for milling and complex surfaces.Develop multi-surface and complex toolpaths for precision components.Import and interpret 3D CAD models from design software such as SolidWorks and AutoCAD.Generate efficient cutting strategies for molds, dies, and precision parts.Select appropriate cutting tools, holders, and machining parameters.Optimize programs to reduce cycle time and improve surface finish.Support CNC operators during program setup and machine troubleshooting.Work with 3-axis, 4-axis, and 5-axis CNC machining centers.Modify and improve existing programs for better productivity.Create setup sheets and machining documentation for production.Conduct toolpath verification and backplot analysis before production.Collaborate with design, tooling, and production teams to ensure manufacturability.Maintain program libraries and machining templates.Assist in fixture and jig design for complex parts.Troubleshoot machining problems related to toolpaths or programming.Monitor machining performance and recommend improvements.Ensure programs meet quality and tolerance requirements.Maintain compliance with manufacturing safety standards.Provide technical guidance to CNC machinists and junior programmers.Rotational Shifts

We are seeking a creative and detail-oriented Mechanical Design Engineer to join our engineering team. In this role, you will be responsible for designing, developing, and improving mechanical components and systems using CAD tools, engineering principles, and industry standards. The ideal candidate will work closely with cross-functional teams to take designs from concept to production while ensuring quality, efficiency, and manufacturability.

An interior designer's responsibilities encompass a wide range of tasks, including creating functional and aesthetically pleasing spaces. They assess client needs, develop design plans (including 2D and 3D renderings), select furnishings, and coordinate with other professionals to ensure successful project execution.

IMMEDIATE HIRINGS - BULK REQUIREMENT!!! BIW FIXTURE DESIGN / LEAD ENGINEER (MECHANICAL ENGINEERING) Location: Hubli Dharwad / Haliyala (Near Dandeli) Experience Required: 34 Years, 46 Years, 69 Year Education: B.E. / B.Tech / Diploma / GTTC / NTTF or Relevant Education Notice Period: Immediate Joiners Up to 45 Days About the Role:Proficiency in CATIA / UG-NX / FIDES.Strong experience in BIW (Body in White) fixture design.Expertise in CAD Software (CATIA, UG-NX).Knowledge of automotive standards and GD&T.Hands-on experience in 2D, 3D, Concept Design. Skills Required: Strong understanding of automotive design standards. Good knowledge in CAD tools and GD&T applications. Experience in Concept Generation, Detail Design, and Fixture Development. How to Apply:Send your resume to: Pennaiah.p@praxien.com Contact: +91 8217738864 Bulk Hirings Apply Now! Immediate Opportunities Available.#Hiring #BIWFixtureDesign #MechanicalEngineering #CATIA #UGNX #Automotive #JobOpportunity #ImmediateJoiners #HaliyalaJobs #DandeliJobs #HubliJobs #EngineeringJobs #HiringNow #BIWFixtureDesign #MechanicalEngineering #CATIA #UGNX #AutomotiveDesign #CADSoftware #ImmediateJoiners #DesignEngineer #EngineeringJobs

Fresher , Mechanical engineering,

Qualification-Diploma & B.Tech Mechanical,Software Knowledge-auto ,solid Work, edgeKey Skills-Spm Machine design, jig & fixture design

Dear potential candidates,We are seeking individuals with the following skills to apply for the position. Please submit your resume to skilldevelopment@kunaero.com, along with details of your Current and Expected CTC, as well as your Notice period. Kindly use Design Engineer as the subject line for your emailExperience : 4 - 6 years from relevant backgroundInterview : Direct Work Location : Chennai - AmbatturSalary not constraint for right candidate1. Expertise in Solidworks2. Manpower allocation for engineering documentation process.(FAI & RCN)3. Purchase Order Request to customer.4. Part on time delivery to customer.5. OSP process & production part Follow-up.6. Pending action follow-up (internal & customer).7. RM planning.8. Machine Allocation.9. MED-Contract Review Responsibility & Contract Review Status Send to customer.10. Contract Review circulated with CFT team.11. Coordinate with customers (Weekly Calls, APQP update, and Open Order Reviews).12. Engineering service documentation activities.13. Understanding and adhering of department Significant Aspects/Impacts14. Understanding and adhering of department work instruction or procedures15. Adopt KAPL Waste segregation Method16. Communicate the Abnormal situation /Non-conformance information to department core team member17. as per internal communication procedure18. Perform EMS relevant task as per department core team member instruction

We are seeking a skilled Design Engineer with expertise in Welding Fixture Design using UG NX software. The ideal candidate will have 2 to 6 years of experience in BIW (Body in White) Welding Fixture Design within the automotive or manufacturing industry.Key Responsibilities: Develop and design welding fixtures using UG NX software, ensuring adherence to project requirements and specifications. Collaborate with cross-functional teams including manufacturing, production, and quality assurance to ensure design feasibility and manufacturability. Conduct design reviews and make necessary modifications to optimize fixture designs for performance, efficiency, and cost-effectiveness. Perform tolerance analysis, GD&T interpretation, and validation of fixture designs to meet quality and safety standards. Support the implementation and testing of welding fixtures on the shop floor, providing technical assistance and troubleshooting as needed.Stay updated on industry trends, best practices, and advancements in welding fixture design technology to enhance design processes and capabilities.Qualifications:Bachelor's degree in Automobile Engineering, Mechanical Engineering, or Manufacturing Engineering.Proficiency in UG NX software for welding fixture design is mandatory.Strong understanding of BIW (Body in White) welding processes and fixture design principles.Excellent problem-solving skills, attention to detail, and ability to work effectively in a team environment.Effective communication skills and ability to collaborate with cross-functional teams.Prior experience in the automotive or manufacturing industry is preferred.If you meet the qualifications and are passionate about designing innovative welding fixtures using UG NX software, we encourage you to apply for this exciting opportunity. Join our dynamic team and contribute to the success of our projects in the automotive manufacturing sector.To apply, please submit your resume

Robotics Design Engineers(Mechanical) -Robotics automation Company in GurgaonJob descriptionResponsible for automation system designing from initial concept to final detail design including 2D & 3DResponsible for SPM/New Product designing/Grippers/Conveyors etc. design from concept to final detailed design including 2D & 3DMandatory:-Mechanical designSolid works and auto cadRobotic cellAutomationJig and fixtureRobotic simulationSatish kohli

Were Looking for Design Engineer / Senior Design Engineer / Team Lead in Bangalore who can start ASAP,Domain: BIW Welding Fixture Location: BangaloreResponsibilities: BIW Welding Fixture / Gripper Conceptual Design, Design Validation & Review, 3D and 2D detailing, Manufacturing Drawings & BOM, Quality Checking & Assurance.Requirements:Qualification B.E/B.Tech in Mechanical/Automotive Hands on Experience in BIW, Welding Fixture Design using Catia / UG-NX. Exposure to Simulation packages will be added advantage. Good knowledge on entire vehicle assembly, Independent in conceptual Design of assembly line equipments, good knowledge in welding and other joining process, good in GD&T, material science and heat treatment, Good Fabrication Drawings creation and checking. Experience in BIW Welding Fixtures. Should be able to handle conceptual designs independently. Should have exposure to US/European Automotive Standards (OEM standards). Strong technical foundation. Good communication skills. Exp in leading a team of 4 6 engineers. Should be strong on Automotive domain.

We are the Checking Fixture manufacturer. Required 3D Design engineer & 2D drafting engineer both candidates.

Job Description :1. Work closely with Marketing, QA, R&D and Production teams on design/development of new parts, products, tooling, jig and fixtures.2. Review all tool designs for part manufacturability and minimization of quality issues.3. Recommend purchase of equipment and materials for new product projects. Work to ensure Machinery is been properly taken care and prevention of machinery downtime.4. Plan, coordinate, support and monitor fabrication and testing processes to ensure timely completion of projects or tasks.5. Troubleshooting and recommend engineering changes on existing tools for improvement in quality and sustainability.6. Supervise and provide Hand-on assistance to Tool Makers in their day-to-day tasks.7. Identify and implement performance and maintenance efficiency improvement.8. Good experience in DFM and tooling design. 9. Familiar with 2D and 3D CAD design drawing.10. Fully understand the planning and basic requirement before tool fabrication, and after tool fabrication.11. Good communication skill to work with factory level and support customer.Qualification:1.Must have prior management experience in an engineering environment, preferably metal stamping industry.2.Basic understanding of metal stamping is needed . 3.Basic skillset in handling conventional machining, EDM or Wire cut is preferred

We actually need a Automation Engineer having experience in PLC and Automation, and also experienced in solid works or solid edge. Minimum Experience required is 5 to 6 years and Qualification : B.E. Electronics / Electrical / Instrumentation.Background:New Product Development, Medical Device Manufacturing, ISO 13485, ISO 14791, Jigs & fixture Development, SPM Development, Automation. Design History file.JD:1. Delivery of features1.1 By planning the feature development1.2 By working closely with the engineering team to align them with the requirements1.3 By tracking the development progress2. Good quality of the product2.1 By developing the verification and validation plans2.2 By working with the quality team to execute on the verification and validation suite3. Adherence to 13485 and 62304 standards.3.1 By understanding the requirements of these processes through reading and training.3.2 By ensuring all the correct development processes are being followed3.3 By creating the documentation required4. Cost Effective Solution4.1 By learning the new technologies4.2 By Implementing in house solution5. Documentation5.1 By making Design history file5.2 By updating SOP, Process Flow5.3 By Making technical documentsQualification:Mechatronics Engg/ Instrumentation

Must have worked in Tipper, Trailer / Automotive industry. To Manage (Q.C.) to oversee the activity in Quality Control department with implementing, andmaintaining a system of quality, system of Quality Management Systems and various Process and Products,Materials and Components inspection / testing / validations and control for the organizations products,processes and / or development processes. To understand the requirements for the Product, Customers requirements, Legal Requirements for Productsand ensure to maintain and control desired Quality in all these aspects. To strictly adhere all best practices related to Quality Control as well as manufacturing processes and allother related activities to sustain and continual improvise Product Quality as per norms and to enhanceCustomer Delight.Responsible for Quality Control activities such as Jigs ,Fixtures, Templates Validation andAudits as defined in QMS System. Responsible for Process Validation maintaining and controlling the desired ProcessParameters and Norms. Perform Process Audit of Special Processes (Welding / Painting /Shot Blasting Zink Plating) and Critical Processes as per Audit Plan / Schedules.Take necessary CAPA on abnormalities observed during Process Audits. Shall have thorough knowledge of all Quality Functions.Responsible for Quality Control activities such as Jigs ,Fixtures, Templates Validation andAudits as defined in QMS System. Responsible for Process Validation maintaining and controlling the desired ProcessParameters and Norms. Perform Process Audit of Special Processes (Welding / Painting /Shot Blasting Zink Plating) and Critical Processes as per Audit Plan / Schedules.Take necessary CAPA on abnormalities observed during Process Audits. Sound Knowledge of 8 D, CAPA, APQP, PPAP, etc Should be well conversant with Quality Management Systems and shall have hands-on experience of QMS.

Design Engineer Junior and Senior .Knowledge must 2D , ZW & 3D Solid edge.... Press tool & Fixture.

We at K&T having job opening for Sr, Design engineer havinh experince in checking fxture domain

Hiring for 10 BIW Fixture design engineer Jobs in Bengaluru,Hubli,Dharwad,Karwar, Uttara Kannada, with minimum 2 Years Experience,Required Educational Qualification is : B.E, B.Tech, Diplomate of National Board with Good knowledge in BIW firxture,Mechanical Design Engineer,Design Engineer,Fixture Design etc.