Fiber Optic Technician Jobs

PXE Technologies is hiring CCTV Technicians for installation, configuration, servicing, and maintenance of CCTV surveillance systems and related security devices.Responsibilities: Installation and maintenance of CCTV cameras, DVR/NVR systems IP camera configuration and troubleshooting Cable laying and networking work Site visits for service and support Checking and resolving technical issues Coordination with project/site teamRequired Skills: Basic knowledge of CCTV systems and networking Experience in camera installation and troubleshooting Knowledge of DVR/NVR setup Ability to handle field work and site visits Basic communication skills

Experienced Electrical Maintenance Professional with more than 10 years of hands-on experience in industrial and hospital electrical maintenance. Skilled in preventive and breakdown maintenance, electrical troubleshooting, equipment supervision, safety compliance, and team coordination. Holder of Government of West Bengal Electrical Workman

CANDIDATE SHOULD HAVE KNOWLEDGE OF CCTV CABLING , INSTALLATION AND FAULT FINDING

About Our Company:Pathcom Technologies Pvt Ltd. is an Information and Communication Services Company inNetwork, Internet, IT and Video Surveillance Products and Solutions. We specialize inNetworking Services, IT Services, Internet Services, Network Management and monitoring,CCTV Surveillance and Technical Support Services.Key Responsibilities* Execute structured cabling works including laying, termination, and testing of Cat6, Cat6A, and Fiber optic cables.* Install, dress, label, and ground network racks properly.* Perform conduit, trunking, casing, and raceway installations.* Handle basic electrical works related to low-voltage systems.* Install CCTV cameras, access points, switches, and other network peripherals.*Use tools such as crimping tool, punch-down tool, OTDR, power meter, and LAN tester for installation and testing.*Read and understand basic networking diagrams/layouts for proper execution.Skills Required:* Structured cabling* Rack & device installation* Cable termination & testing* Basic electrical knowledge* Ability to work at heights, confined spaces, and active sites* Site safety compliance* Team coordination

We are looking for an Electrician Maintenance Technician with 3 to 8 years of experience. The technician will be responsible for maintaining and repairing electrical systems and equipment. The position is based in Kota and is a full-time office job.**Key Responsibilities:**- **Electrical Maintenance:** Perform routine checks and maintenance on electrical systems to ensure they operate safely and efficiently. This includes inspecting wiring and equipment.- **Troubleshooting:** Identify and diagnose problems in electrical systems. Use technical skills to find the root cause of issues and develop effective solutions.- **Repairs:** Carry out repairs on electrical faults or failures swiftly to minimize downtime and ensure safety. This involves replacing parts and reworking circuits as needed.- **Installation:** Assist in the installation of new electrical systems and components, ensuring they meet safety standards and function properly.- **Documentation:** Keep accurate records of maintenance activities, repairs done, and any parts used. This helps in planning future maintenance and tracking electrical issues.**Required Skills and Expectations:**- **Technical Knowledge:** Strong understanding of electrical systems, wiring, and components is essential. An I.T.I. qualification in electrical work is required.- **Problem-Solving Skills:** Ability to think critically and troubleshoot issues effectively is crucial.- **Attention to Detail:** Must be detail-oriented to avoid errors in installations and repairs that could lead to safety hazards.- **Physical Endurance:** The role may involve manual labor, so physical fitness and endurance are important.- **Team Player:** Must be comfortable working alone or as part of a team to achieve tasks effectively. Good communication skills are also valued.

We are looking for a Cable Technician to join our team in Santacruz. The ideal candidate will be male, with 1 to 5 years of experience in cable installation and maintenance. A minimum education level of 10th pass is required, and this is a full-time position based in an office environment.**Key Responsibilities:**- **Cable Installation**: Install various types of cables, ensuring proper connections and routing according to specifications to maintain high-quality service.- **Maintenance and Troubleshooting**: Diagnose and repair cable-related issues, ensuring optimal performance to minimize downtime for clients.- **Testing and Quality Assurance**: Conduct tests on installed cables to confirm they are functioning correctly and to identify any faults.- **Customer Assistance**: Provide technical support to customers, answering their questions and assisting them with any cable-related concerns.- **Documentation**: Maintain accurate records of installations, repairs, and maintenance activities to ensure compliance and for future reference.**Required Skills and Expectations:**Candidates should have a strong understanding of cable types, installation techniques, and troubleshooting methods. Good communication skills are essential for interacting with clients and team members. Applicants should demonstrate the ability to work both independently and as part of a team. A commitment to safety and best practices in cable handling and installation is expected. Lastly, reliability and a strong work ethic are crucial for success in this role.

Need Fresher for Assist Fiber Technician and Support for Their Work in Field. Candidate Should Willing for Field Activity as this Job is Full Time Field Job. No Need of Bike in this Work. Need Punctual Candidate.

Totally filed job pole climbing cable laying all type work.

Job description:1. Installing, Maintaining and Repairing of Electronic Security Services Technologies viz. CCTV, Boom Barriers, LED TV.2. Install New Equipment and Repair Existing System.3. Inspect Existing Wiring and Electrical Equipment4. Assembling, evaluating, testing, and maintaining electrical or electronic wiring, equipment, appliances, and apparatus.5. Troubleshooting and repairing malfunctioning equipment, appliances, and apparatus. Constructing and fabricating parts, using hand tools and specifications.6 Office Activities viz. Handover the service report every evening after the call has been done.7 Assisting Service Engineers for Service Call Related Work8 Assisting Stores & Purchase Managers for his Stores and Procurement related Tasks.9.Inspect Existing Wiring and Electrical Equipment10.CCTV Wiring in Casing Patti & Conduits11.Field Service in & Around Pune12.Installation of Electric Fence13.Installation of Video Door Phone14.Cable Tracing15.Earthing CheckingWork Location: In person

We are seeking a skilled ELV Technician to join our team in Indore, India. As an ELV Technician, you will be responsible for installing, maintaining, and repairing various electronic systems such as fire alarms, security systems, and CCTV cameras.Key Responsibilities:- Installing and configuring electronic systems according to blueprints and specifications.- Troubleshooting and diagnosing issues with electronic systems.- Performing regular maintenance and inspections on electronic systems.- Collaborating with other technicians and engineers to ensure systems are functioning properly.To excel in this role, the ideal candidate should have completed their I.T.I. education and have at least 1 year of experience in a similar position. We are looking for a detail-oriented individual who has strong problem-solving skills, excellent technical knowledge of electronic systems, and the ability to work well in a team environment. This position requires the candidate to be male due to the nature of the job. If you meet these requirements and are looking for a full-time position where you can showcase your skills, we would love to hear from you.

Basic troubleshooting knowledge,Familiarity with cable types and connectorsAwareness of fire safety and emergency protocols

1) Cable Tv and Internet Technicians 2) Helpers 3) Wiring

Key responsibilities:1. House Wiring: The ITI Electrician will be responsible for installing electrical wiring in residential buildings according to safety standards.2. Panel Wiring: This role involves wiring and connecting electrical control panels for various equipment and machinery.3. Panel Erection: The ITI Electrician will be involved in the assembly and installation of electrical panels in industrial settings.4. Cable Laying: This includes the placement and installation of electrical cables in buildings or construction sites.5. Cable Technician: The Electrician will be responsible for troubleshooting and fixing issues related to electrical cables and connections.6. Electrical Maintenance: This role includes routine maintenance and repair of electrical systems and equipment.7. Electrical Installation: The ITI Electrician will assist with the installation of new electrical systems and components.Required skills and expectations:- Must have completed either 12th Pass, 10th Pass, I.T.I., or B.E in a relevant field.- Knowledge and experience in house wiring, panel wiring, and cable laying.- Ability to work with tools and equipment safely and efficiently.- Strong understanding of electrical systems and components.- Ability to follow safety protocols and regulations.- Good communication skills to collaborate with team members and supervisors.- Willingness to work in a full-time position in an office setting. Candidates should be males with 0-2 years of experience and must have completed relevant education in order to apply for this position.

Cable Technician wanted in trichy

Job Description: Fiber TechnicianPosition SummaryWe are seeking a full time Fiber Optic Technician to become an integral part of our team! Youwill install, test and trouble shoot SM fiber optic cables in a FTTH network.Responsibilities: Installation and maintenance of a Fiber Optics FTTH network Install, repair and resolve fiber optic systems and ensure that they work properly Take care of fiber splicing and rectify fiber optic problem areas Splice and Terminate SM fiber Perform basic to complex installation, troubleshooting & repair of fiber systems underminimal supervision Access the fiber optic splice enclosure and splice the necessary fibers directly from abucket truck Perform fiber tests: OTDR, power meter/laser source, and scopes. Prep, tray, and splice fiber optic cable ranging from single fiber to large counts as well asperform ring cuts when needed Install demarcation enclosures, switches and other telecom equipment Fiber optic test and troubleshooting abilities Other duties as assignedSkills and Abilities Commit to safe work there is nothing more important! Monitor, communicate and perform corrective actions to fix problems affecting any fiberor fiber related equipment Prep cable, splicing, connectors, installation of fiber optic cabinets OSP/ISP splice enclosure manufacturers Troubleshoot, diagnose, repair and/or install fiber-based services Splice and fiber issues using industry standard equipment Terminate, splice, document and test fiber optic cablesJob ExperienceDesired: Recent Fiber Installation - Pulling/Terminating fiber cabling. Fusion splicing/terminations FOA Certification is a plus General knowledge of OTDR and Light Source and Power Meters Familiar with splice drawings and OTDR test sheets and reading traces Ability to read splicing matrix and design drawings Cable prep/single and mass fusion splicing and termination abilities Fiber optic test and troubleshooting abilitiesRequired: Good motor vehicle driving record Excellent writing and oral communication skills Ability to interact with customers, vendors, contractors and other required personnel The individual must comply with departmental and corporate internal controls and allinternal controls processes The individual must possess and employ the highest ethical and business standards andalways conduct himself/herself with the greatest degree of professional integrityExperience: Fiber Optic: 2 years (Preferred)Salary: 12 to 20k

Assembly of wiring harnesses using hand tools and proper assembly techniques Soldering (IPC610 Standard) and Wiring (IPC620 Standard)Solder PCBAs, connectors, wires, crimp and install specialized wires, cables and connectors. Troubleshoot and test assemblies Maintaining a safe and clean environment by keeping shelves and workstations neat; complying with procedures, rules, and regulations Incoming Goods Inspection (IGA):Inspect incoming goods (Electrical, Mechanical, Electronics etc), including test jigs, fixtures, and automated test equipment (ATEs), to ensure compliance with quality standards. Laboratory Equipment Maintenance:Maintain and calibrate electronic laboratory equipment to ensure accuracy and reliability, Testing and Troubleshooting:Perform testing, fault-finding, and troubleshooting at the component level for various electromechanical components/ devices and systems. Inventory Management:Manage the stock inventory of electromechanical parts, ensuring availability for projects and minimizing downtime. Interface with customers to understand wiring requirements, Document test results and prepare detailed reports. Responsible to release controlled documents Creation of Test System Bill Of Material Analysing and validating material/component /parts selection w.r.t tolerances, performance and manufacturability. Electrical/ Electronic Schematics preparation using AUTOCAD/ORCAD etc. Responsible to improve 5S & Kaizen initiatives Travel to client place for installation and support You will be responsible for the delivery of the items assigned to you with quality and should interact with cross functional team and resolve the problem.

1. Run and pull coaxial, Fiber optic, or Ethernet cables through walls, ceilings, and underground spaces.2. Perform signal testing and troubleshooting using specialized equipment (e.g., meters, toners).3. Repair or replace faulty cabling, connectors, or equipment.4. Provide excellent customer service and explain technical information to non-technical users.5. Follow safety procedures and comply with company and local regulations.

Job Description: Fiber TechnicianPosition SummaryWe are seeking a full time Fiber Optic Technician to become an integral part of our team! Youwill install, test and trouble shoot SM fiber optic cables in a FTTH network.Responsibilities: Installation and maintenance of a Fiber Optics FTTH network Install, repair and resolve fiber optic systems and ensure that they work properly Take care of fiber splicing and rectify fiber optic problem areas Splice and Terminate SM fiber Perform basic to complex installation, troubleshooting & repair of fiber systems underminimal supervision Access the fiber optic splice enclosure and splice the necessary fibers directly from abucket truck Perform fiber tests: OTDR, power meter/laser source, and scopes. Prep, tray, and splice fiber optic cable ranging from single fiber to large counts as well asperform ring cuts when needed Install demarcation enclosures, switches and other telecom equipment Fiber optic test and troubleshooting abilities Other duties as assignedSkills and Abilities Commit to safe work there is nothing more important! Monitor, communicate and perform corrective actions to fix problems affecting any fiberor fiber related equipment Prep cable, splicing, connectors, installation of fiber optic cabinets OSP/ISP splice enclosure manufacturers Troubleshoot, diagnose, repair and/or install fiber-based services Splice and fiber issues using industry standard equipment Terminate, splice, document and test fiber optic cablesJob ExperienceDesired: Recent Fiber Installation - Pulling/Terminating fiber cabling. Fusion splicing/terminations FOA Certification is a plus General knowledge of OTDR and Light Source and Power Meters Familiar with splice drawings and OTDR test sheets and reading traces Ability to read splicing matrix and design drawings Cable prep/single and mass fusion splicing and termination abilities Fiber optic test and troubleshooting abilitiesRequired: Good motor vehicle driving record Excellent writing and oral communication skills Ability to interact with customers, vendors, contractors and other required personnel The individual must comply with departmental and corporate internal controls and allinternal controls processes The individual must possess and employ the highest ethical and business standards andalways conduct himself/herself with the greatest degree of professional integrityExperience: Fiber Optic: 2 years (Preferred)

Job Description: Fiber TechnicianPosition SummaryWe are seeking a full time Fiber Optic Technician to become an integral part of our team! Youwill install, test and trouble shoot SM fiber optic cables in a FTTH network.Responsibilities: Installation and maintenance of a Fiber Optics FTTH network Install, repair and resolve fiber optic systems and ensure that they work properly Take care of fiber splicing and rectify fiber optic problem areas Splice and Terminate SM fiber Perform basic to complex installation, troubleshooting & repair of fiber systems underminimal supervision Access the fiber optic splice enclosure and splice the necessary fibers directly from abucket truck Perform fiber tests: OTDR, power meter/laser source, and scopes. Prep, tray, and splice fiber optic cable ranging from single fiber to large counts as well asperform ring cuts when needed Install demarcation enclosures, switches and other telecom equipment Fiber optic test and troubleshooting abilities Other duties as assignedSkills and Abilities Commit to safe work there is nothing more important! Monitor, communicate and perform corrective actions to fix problems affecting any fiberor fiber related equipment Prep cable, splicing, connectors, installation of fiber optic cabinets OSP/ISP splice enclosure manufacturers Troubleshoot, diagnose, repair and/or install fiber-based services Splice and fiber issues using industry standard equipment Terminate, splice, document and test fiber optic cablesJob ExperienceDesired: Recent Fiber Installation - Pulling/Terminating fiber cabling. Fusion splicing/terminations FOA Certification is a plus General knowledge of OTDR and Light Source and Power Meters Familiar with splice drawings and OTDR test sheets and reading traces Ability to read splicing matrix and design drawings Cable prep/single and mass fusion splicing and termination abilities Fiber optic test and troubleshooting abilitiesRequired: Good motor vehicle driving record Excellent writing and oral communication skills Ability to interact with customers, vendors, contractors and other required personnel The individual must comply with departmental and corporate internal controls and allinternal controls processes The individual must possess and employ the highest ethical and business standards andalways conduct himself/herself with the greatest degree of professional integrityExperience: Fiber Optic: 2 years (Preferred)Salary: 12 to 20k