Engineering Job Vacancies in Kanchipuram

Greeting From Vishakan Placement Service Walkin interview For Quality Management System (QMS) Manager PositionIndustry: Automotive / ManufacturingPosition: Quality Management System (QMS) ManagerExperience: Minimum 5 yearsPosition SummarySharpwire is looking for an experienced QMS Manager to lead and strengthen our Quality Management System, ensure compliance with IATF 16949 requirements, and drive continuous improvement across manufacturing and quality processes.The ideal candidate must have a minimum of 5 years of hands-on IATF 16949 audit experience, with strong exposure to internal audits, customer audits, certification audits, corrective actions, defect reduction, and quality performance monitoring.Key ResponsibilitiesQMS & IATF 16949* Lead and maintain the companys IATF 16949 Quality Management System.* Ensure compliance with applicable customer-specific requirements and quality standards.* Plan and conduct internal QMS and process audits.* Lead preparation for IATF, customer, and certification-body audits.* Ensure timely closure and effectiveness verification of audit findings and non-conformities.* Maintain QMS documentation, procedures, work instructions, records, and quality objectives.Defect Reduction & Quality Improvement* Drive initiatives to reduce internal and external defects, rejection, rework, scrap, and customer complaints.* Monitor quality KPIs and identify areas requiring immediate corrective or preventive action.* Lead Root Cause Analysis, 8D, CAPA, 5-Why, Fishbone, and other problem-solving activities.* Establish and monitor defect-reduction targets for production and supporting functions.* Work closely with Production, Engineering, Maintenance, and Supply Chain teams to eliminate recurring quality issues.Quality Trend Analysis* Track quality defects and trends by product, process, machine, shift, customer, supplier, and defect type.* Develop and maintain Pareto analysis, trend charts, rejection reports, and quality dashboards.* Identify recurring and emerging quality trends and initiate preventive actions before issues become major problems.* Present quality performance, trends, risks, and improvement actions to management.* Use data-driven analysis to identify opportunities for continuous improvement and defect prevention.Customer Quality* Monitor and manage customer complaints and quality concerns.* Ensure effective and timely response to customer complaints, including 8D reports and corrective actions.* Track customer PPM, complaints, returns, and other customer quality indicators.* Work with relevant teams to prevent recurrence of customer issues.Continuous Improvement* Drive PDCA and continual improvement activities throughout the organization.* Establish quality improvement projects focused on defect reduction, process capability, and customer satisfaction.* Promote a strong zero-defect and prevention-oriented quality culture.* Monitor the effectiveness of corrective and preventive actions.Team & Cross-Functional Leadership* Lead and develop the Quality team.* Train employees on QMS requirements, quality procedures, problem-solving, and audit readiness.* Coordinate with cross-functional teams to resolve quality issues.* Ensure accountability for quality objectives and improvement actions across departments.Required Qualifications & Experience* Bachelors degree/Diploma in Mechanical, Electrical, Industrial Engineering, Quality, or related field.* Minimum 5 years of hands-on IATF 16949 audit experience - mandatory.* Strong experience in IATF 16949 QMS implementation, maintenance, and auditing.* Experience handling IATF certification audits, customer audits, and internal audits.* Strong knowledge of:* IATF 16949* ISO 9001* Core Tools - APQP, PPAP, FMEA, MSA, SPC* 8D / CAPA / Root Cause Analysis* Process and Product Auditing* Control Plans* Statistical and trend analysis* Proven track record of reducing defects, rejection, scrap, rework, and customer complaints.* Strong analytical and problem-solving skills.* Good communication and leadership skills.* Proficiency in Excel and quality data analysis/reporting.Preferred* Automotive manufacturing experience.* Experience with wire, cable, harness, metal forming, stamping, or related manufacturing processes.* Certified IATF 16949 Internal Auditor / Lead Auditor.* Experience with customer-specific requirements and major automotive customer audits.* Experience implementing measurable quality improvement projects.Key Performance Indicators (KPIs)The QMS Manager will be responsible for driving measurable improvement in:* Internal rejection / defect PPM* Customer PPM* Customer complaints* Scrap and rework* Repeat defects* Audit non-conformities* Corrective-action closure effectiveness* Process audit compliance* Supplier quality performance* Cost of Poor Quality (COPQ)* Overall QMS effectivenessSuccess in This RoleSuccess will be measured by the ability to maintain a robust IATF 16949 QMS, achieve strong audit performance, identify quality trends early, eliminate recurring defects, reduce overall rejection and customer complaints, and establish a culture of prevention and continuous improvement at Sharpwire.If you want, I can also make this more aggressive and KPI-driven for hiring, including specific targets such as 30% defect reduction, zero repeat customer complaints, audit score targets, and PPM reduction.Job Shift : DAY (8.15AM -6.00PM) , NIGHT( 9.00PM -7.15AM)/ Sunday Week-offNo of openings: 3Age limit: Till 35 Immediate Joiner Must Work Location: Sriperumbudur Candidate nearby Location: Sriperumbudur, Kanchirpuram, Nemilin, Thandalam, manavala nagar Vellavedu,Veppampattu,Sevvapet,thiruninravur,poonamallee,thirumazhisai.Interested Candidate For Job Please Call immediately & Share your Resume Call/WhatsApp: HR Pradeep +91 955 195 2508

Greeting From Vishakan Placement Service!!! Hiring Junior Process OperatorPosition: Junior Process Operator - E-Waste Chemical RecoveryDepartment: Production / Process OperationsIndustry: E-Waste Chemical RecoveryFresher Candidate OnlyQualification: ITI / Diploma/B.E Chemical Engineering, B.E Mechanical Engineering & Bsc. Chemistry background preferred.Shift Timing: 8 Hrs Rotational 1- Rotational Week-Off Reports To: Shift In-Charge / Production SupervisorJD:Handle and charge processed e-waste/raw materials into leaching tanks as per SOP and batch requirements.Handle process chemicals safely and follow approved chemical addition procedures.Operate leaching tanks, agitators, pumps, valves and chemical dosing systems.Monitor and record process parameters such as pH, temperature, level, time and agitation.Operate filter press/filtration equipment and handle slurry and filtrate safely.Collect, segregate, weigh and transfer sludge/filter cake/residues to designated areas.Assist in metal recovery processes such as precipitation, cementation or electrowinning as per SOP.Collect process samples and coordinate with QC/Lab for analysis.Maintain batch sheets, chemical consumption, production, recovery and shift records.Perform basic equipment checks and immediately report leaks, blockages, breakdowns or abnormalities.Follow PPE, EHS, chemical handling, LOTO and emergency procedures at all times.Maintain good housekeeping, 5S and cleanliness around the process area.Qualification: ITI / Diploma / 12th Science; B.E Chemical Engineering, B.E Mechanical Engineering & Bsc. Chemistry background preferred.Key Skills: Safety awareness, SOP compliance, basic chemical/process knowledge, teamwork, documentation and willingness to work in shifts.Fixed Salary:20 K CTC + ESI+ PF + Medical Insurance Overtime (OT) Policy - OT eligibility and applicable OT rates 1.5 TimesAllowances - attendance allowance, Chemical AllowancesCab / Transportation Facility - based on the timing and pick up from dedicated pointsAccommodation - Near Kandigai / Oragadam ( Company Provided)Food Facility / Meal Allowance - BF, Lunch and Dinner based shift basis and We provided on subsidy for the foodNo of openings: 35 Male candidate only Interview Process: HR Round-Technical Round Immediate Joiner Must Work Location:, Oragadam, Ezhichur Village(Sriperumpudur Taluk,Kanchipuram(DT) - 603 204)If Candidate Interested For Job Please Call Immediately & share your Cvs Call/Whatsapp: Vishakan Placement Service HR Pradeep jobvpservice@gmail.com

We are seeking a dedicated Maintenance Engineer to join our team in Sriperumbudur, Kanchipuram. The ideal candidate will have 1 to 5 years of experience and a diploma in a relevant field. This full-time position requires a commitment to maintaining equipment and ensuring smooth operations.Key Responsibilities:1. Regular Equipment Maintenance: Perform routine checks and maintenance on machinery to prevent breakdowns and ensure optimal performance.2. Troubleshooting and Repairs: Quickly diagnose and fix equipment issues to minimize downtime and maintain production schedules.3. Documentation: Maintain detailed records of maintenance activities, repairs, and inspections to ensure compliance with safety standards and facilitate future work.4. Collaboration with Other Teams: Work closely with production and engineering teams to identify and resolve technical issues, ensuring seamless operations.5. Safety Compliance: Follow safety procedures and protocols while performing maintenance tasks, promoting a safe working environment for all employees.Required Skills and Expectations:Candidates should possess strong technical knowledge related to machinery and maintenance practices. Attention to detail, problem-solving abilities, and effective communication skills are essential. The ideal candidate should be proactive, able to work independently, and demonstrate a strong commitment to safety and quality standards. A male candidate is preferred for this role.

Perform routine inspections of equipment, and facilities. Carry out preventive maintenance on machine and equipment. Diagnose and repair electrical, plumbing, and mechanical issues. Install, repair, and replace fixtures, fittings, and equipment as required.Maintain records of maintenance activities, repairs, and inspections.Ensure compliance with safety regulations and company policies.Monitor inventory of maintenance tools, equipment, and spare parts.Maintain cleanliness and organization of maintenance work areas

Quality Check before dispatch as final inspection WhatsApp: 7339078760

As an Electrical Design Engineer, you will play a crucial role in designing and developing electrical systems. This position is best suited for candidates with 1 to 3 years of experience in electrical design and a Bachelors degree in Engineering (B.E).Key Responsibilities:- Design Electrical Systems: Create detailed designs for electrical systems, ensuring they meet project requirements and industry standards.- Conduct Simulations: Use software tools to run simulations on electrical components and systems to foresee their performance in real-world applications.- Collaborate with Teams: Work closely with cross-functional teams, including mechanical engineers and project managers, to ensure integrated system designs.- Prepare Technical Documentation: Generate and maintain documentation of designs, specifications, and testing protocols for future reference and compliance.- Troubleshoot Issues: Identify and resolve any design or operational issues in existing electrical systems to improve efficiency and performance.Required Skills and Expectations:Candidates should have a strong understanding of electrical engineering principles and practices. Proficiency in design software, such as AutoCAD or similar tools, is essential. The ability to work collaboratively in a team environment and communicate effectively with colleagues is expected. Analytical skills and attention to detail are crucial for troubleshooting and optimizing designs. Strong problem-solving abilities will aid in developing innovative solutions to overcome engineering challenges. Preference will be given to male candidates, and you must be willing to work on-site at the Oragadam location.

Job Title: Graduate / Diploma Engineer Trainee (GET / DET) Mechanical / Automobile / EEEIndustry: Automobile / Automotive ManufacturingLocation: Mahindra World City.Department: Production / Quality / Maintenance / R&D / Assembly / TestingEmployment Type: Full TimeExperience: Fresher (01 year)Education: Diploma or B.E./B.Tech in Mechanical / Automobile / Electrical and Electronics EngineeringJob SummaryWe are looking for fresh engineering graduates and diploma holders to join our dynamic team as Engineer Trainees in various departments of our automobile manufacturing operations. The role offers exposure to real-world automotive production environments and is ideal for candidates passionate about developing a career in the automobile sector.Key Responsibilities:Assist in production, assembly, or quality assurance operations.Operate, monitor, and maintain manufacturing equipment and tools.Support preventive and breakdown maintenance activities.Conduct quality inspections and assist in root cause analysis of defects.Learn and implement standard operating procedures (SOPs) and industry best practices.Collaborate with senior engineers and cross-functional teams on improvement projects.Ensure compliance with safety and quality standards.Maintain accurate records and documentation for processes and performance.Key Skills Required:Strong understanding of core engineering concepts (mechanical, automotive, or electrical).Ability to read and interpret technical drawings and circuit diagrams.Basic knowledge of manufacturing processes, quality tools, and maintenance techniques.Good communication, problem-solving, and team collaboration skills.Willingness to learn and adapt in a fast-paced industrial environment.Awareness of 5S, Kaizen, and other lean manufacturing principles (added advantage).Eligibility Criteria:Education: Diploma or B.E./B.Tech in Mechanical, Automobile, or Electrical & Electronics Engineering.Experience: 01 year (Freshers encouraged to apply).Internship or academic projects in the automotive/industrial domain is a plus.Career Path & Opportunities:Fast-track growth to roles such as Production Engineer, Maintenance Engineer, Quality Engineer.Opportunity to work with the latest automotive technologies, electric vehicles, and automation systems.Skill enhancement through training and mentorship programs.Job Benefits:Competitive salary or stipendEPF, ESI, and other statutory benefitsTraining & development programsSubsidized meals and transportationWorkwear and safety equipment provided

1.Identify and target potential clients in various industries for water treatment solutions.2.Develop and maintain strong relationships with new and existing clients.3.Understand client needs and provide solutions to meet their requirements.;

Be the Quality Backbone Hiring QMS EngineersJob DescriptionExperience: 2 to 5 yrsSalary: Best in IndustriesEducation: Diploma/BE in any SpecializationWhat You will do:Design and Implement: You will be responsible for the design, development, and implementation of our Quality Management System in compliance with industry standards such as ISO 9001.Be a Strategist: You will conduct internal audits, analyze data, and identify areas for improvement, driving corrective and preventive actions across the organization.Lead for Compliance: You will lead efforts to ensure our QMS meets all regulatory and customer-specific requirements, managing documentation and preparing for external audits.Be the Trainer: You will train and mentor employees across all departments on quality principles and QMS procedures, fostering a company-wide commitment to quality.Drive Continuous Improvement: You will utilize quality tools (e.g., Lean, Six Sigma) to identify opportunities to enhance processes and reduce waste and defects.Ready to take the leapHR - Maria88708 33430infohrmaria04@gmail.com

We have vacant of 5 Civil Site Engineer Jobs in Kalpakkam, Kanchipuram, for Freshers Educational Qualification : B.E Skill Site Supervision, Building Construction, Site Execution, Autocad, Manpower Planning etc.

Role & responsibilitiesAssist in day-to-day site activities under the supervision of the Site Engineer/Project ManagerMonitor construction activities and ensure work is executed as per drawings and specificationsCoordinate with contractors, laborers, and vendors on-siteEnsure timely availability of materials and toolsHelp in preparing daily/weekly progress reportsConduct site inspections to ensure quality and safety complianceMaintain records and documentation for project workSupport in quantity and material estimationsPreferred candidate profileImmediate candidates preferredMale candidates onlyInternship or project experience in construction or site supervisionBasic knowledge of surveying tools and construction softwareRole: Civil EngineerIndustry Type: Engineering & ConstructionDepartment: Construction & Site EngineeringEmployment Type: Full Time, PermanentRole Category: Construction EngineeringEducationUG: B.Tech/B.E. in CivilKey SkillsSkills highlighted with are preferred keyskillsGood understanding of civil engineering fundamentals and site execution processes Ability to read and interpret technical drawings and plans Basic knowledge of construction materials and techniquesAutoCADMS Office

specific skills that facilitate identifying sales opportunities, building professional relationships and trust with customers and successfully closing sales.

Job Purpose:To provide expert-level testing, commissioning, maintenance, and service support for transformers, ensuring optimal performance and compliance with industry standards.Key Responsibilities:Testing & Diagnostics:Conduct electrical tests such as insulation resistance, winding resistance, transformer turns ratio (TTR), and vector group tests.Perform advanced diagnostic tests, including Tan Delta, Partial Discharge (PD), and Sweep Frequency Response Analysis (SFRA).Analyze test results and provide recommendations for corrective actions.Commissioning:Supervise the installation and commissioning of transformers at project sites.Execute functional and performance tests in compliance with IEC and IEEE standards.Ensure seamless integration of transformers into the power grid.Service & Maintenance:Perform on-site troubleshooting and fault diagnosis for transformers.Undertake repairs, retrofitting, and preventive maintenance activities.Replace defective components and ensure restored operational efficiency.Technical Documentation:Prepare test reports, commissioning logs, and service records.Maintain documentation for regulatory compliance and client reference.Client Support:Provide technical support to clients during and post-project implementation.Train client teams on proper operation and maintenance of transformers.Safety & Compliance:Adhere to safety protocols and quality assurance standards during testing and commissioning.Conduct risk assessments and ensure workplace safety.Key Skills:Expertise in transformer testing, commissioning, and servicing processes.Proficiency in handling equipment like TTR meters, SFRA analyzers, and Tan Delta testers.Strong problem-solving and analytical skills.In-depth knowledge of industry standards such as IEC 60076 and IEEE C57.

Hiring for 35 Quality Engineer Jobs in Tambaram Chennai, Maraimalai Nagar, Chennai, Sriperumbudur, Ambattur Chennai, Guindy, Chennai, for Freshers,Required Educational Qualification is : Diploma, B.E, B.Tech with Good knowledge in Production Control, Quality Check, Assembly Technician etc.

We are looking for 55 Quality Production Maintenance Posts in Maraimalai Nagar, Chennai, Tambaram - Mudichur Road, Chennai, Sriperumbudur, with deep knowledge in Quality Control Engineer, Maintanance, Production Technology and Required Educational Qualification is : Diploma, B.E, B.Tech

highly skilled Electronics & Telecommunication Engineer with expertise in circuit design, embedded systems, wireless communication, and signal processing. Proficient in VLSI, IoT, automation, and power electronics, with hands-on experience in microcontrollers (Arduino, Raspberry Pi, ARM), FPGA programming (Verilog, VHDL), and telecommunication technologies (4G, 5G, RF, Optical Fiber). Strong knowledge of network protocols, troubleshooting electronic systems, and industrial automation (PLC, SCADA, HMI). Adept at problem-solving, teamwork, and project management, ensuring efficient system design and optimization.

he PPC Engineer is responsible for planning, scheduling, and monitoring production activities to ensure efficient manufacturing processes. They coordinate with various departments, manage inventory, optimize resource utilization, and ensure timely delivery of products while maintaining quality standards.

Greeting From Vishakan Placement Service!!! Hiring Senior Process Operator Position: Junior Process Operator - E-Waste Chemical RecoveryDepartment: Production / Process OperationsIndustry: E-Waste Chemical RecoveryOnly Experience: 2-4 years in chemical/process plants, metal recovery, e-waste recycling or related industries; freshers may be considered.Qualification: ITI /Any Diploma /B.E Chemical Engineering, B.E Mechanical Engineering & Bsc. Chemistry background preferred.Shift Timing: 8 Hrs Rotational 1- Rotational Week-Off Reports To: Shift In-Charge / Production SupervisorJOB DESCRIPTION - Sr.PROCESS OPERATOR1. Operate e-waste recycling process equipment as per SOP and instructions from the Process Controller/Supervisor.2. Receive, prepare, and charge raw materials into designated tanks/reactors as per batch requirements.3. Verify raw-material quantity, batch number, tank number, and charging sequence before operation.4. Handle and charge process chemicals safely as per approved SOP and required quantities.5. Operate tanks, reactors, agitators, pumps, valves, filters and related process equipment.6. Monitor process parameters such as pH, temperature, tank level, pressure, flow, and process time.7. Carry out tank-to-tank material transfer and ensure correct pipeline and valve alignment.8. Operate filtration equipment and monitor filtration flow, pressure, and performance.9. Collect, handle, and transfer filter cake/solid material without batch contamination.10. Perform routine inspection of tanks, pumps, filters, pipelines, valves, and other equipment.11. Report equipment breakdowns, leaks, spills, abnormal reactions, or process deviations immediately.12. Take process samples and maintain required process and production records.13. Maintain accurate records of raw materials, chemicals, production quantities, filtration, and material transfers.14. Follow all safety procedures, PPE requirements, chemical-handling practices, and housekeeping standards.15. Support the Process Controller/Supervisor in achieving safe, efficient, and continuous production.Fixed Salary:25 K - 35 K CTC + ESI+ PF + Medical Insurance Overtime (OT) Policy - OT eligibility and applicable OT rates 1.5 TimesAllowances - attendance allowance, Chemical AllowancesCab / Transportation Facility - based on the timing and pick up from dedicated pointsAccommodation - Near Kandigai / Oragadam ( Company Provided)Food Facility / Meal Allowance - BF, Lunch and Dinner based shift basis and We provided on subsidy for the foodNo of openings: 40Male candidate only Age limit: Till 35Interview Process: HR Round-Technical Round Immediate Joiner Must Work Location:, Oragadam, Ezhichur Village(Sriperumpudur Taluk,Kanchipuram(DT) - 603204)If Candidate Interested For Job Please Call Immediately & share your Cvs Call/Whatsapp: Vishakan Placement Service HR Pradeep

Greeting From Vishakan Placement Service !!! Hiring Junior Process Operator Technician (Fresher Graduate)Position: Junior Process Operator Technician - E-Waste Chemical RecoveryDepartment: Production / Process OperationsIndustry: E-Waste Chemical RecoveryShift Timing: 8 Hrs Rotational 1- Rotational Week-Off Reports To: Shift In-Charge / Production SupervisorJD:Handle and charge processed e-waste/raw materials into leaching tanks as per SOP and batch requirements.Handle process chemicals safely and follow approved chemical addition procedures.Operate leaching tanks, agitators, pumps, valves and chemical dosing systems.Monitor and record process parameters such as pH, temperature, level, time and agitation.Operate filter press/filtration equipment and handle slurry and filtrate safely.Collect, segregate, weigh and transfer sludge/filter cake/residues to designated areas.Assist in metal recovery processes such as precipitation, cementation or electrowinning as per SOP.Collect process samples and coordinate with QC/Lab for analysis.Maintain batch sheets, chemical consumption, production, recovery and shift records.Perform basic equipment checks and immediately report leaks, blockages, breakdowns or abnormalities.Follow PPE, EHS, chemical handling, LOTO and emergency procedures at all times.Maintain good housekeeping, 5S and cleanliness around the process area.Qualification: ITI / Diploma / 12th Science; B.E Chemical Engineering, B.E Mechanical Engineering & Bsc. Chemistry background preferred.Experience: 0-4 years in chemical/process plants, metal recovery, e-waste recycling or related industries; freshers may be considered.Key Skills: Safety awareness, SOP compliance, basic chemical/process knowledge, teamwork, documentation and willingness to work in shifts.Fixed Salary:20 K CTC + ESI+ PF + Medical Insurance Overtime (OT) Policy - OT eligibility and applicable OT rates 1.5 TimesAllowances - attendance allowance, Chemical AllowancesCab / Transportation Facility - based on the timing and pick up from dedicated pointsAccommodation - Near Kandigai / Oragadam ( Company Provided)Food Facility / Meal Allowance - BF, Lunch and Dinner based shift basis and We provided on subsidy for the foodNo of openings: 35 Male candidate only Interview Process: HR Round-Technical Round Immediate Joiner Must Work Location:, Oragadam, Ezhichur Village(Sriperumpudur Taluk,Kanchipuram(DT) - 603 204)If Candidate Interested For Job Please Call Immediately & share your Cvs Call/Whatsapp: Vishakan Placement Service HR Pradeep jobvpservice@gmail.com

Greeting From Vishakan Placement Service Hiring Maintenance Head (Engineer)!!!Role/ Position: Maintenance Head Industry: E-Waste Chemical RecoveryDepartment: Maintenance Experience: 8+ Yrs Qualification: Diploma EEE/Mech & B.E (EEE/Mech)Job Summary & Responsibility:1. Maintenance Strategy & ExecutionDevelop, schedule, and oversee daily, weekly, and shutdown maintenance for chemical, metallurgical, and mechanical assets.Implement Preventive Maintenance (PM) and Predictive Maintenance (PdM) programs (vibration analysis, thermography, oil analysis, thickness testing, corrosion monitoring).Plan and execute turnarounds (major refractory relines, chemical scrubber overhauls, electrical distribution servicing).2. Process Safety & Corrosion ManagementManage maintenance of equipment handling aggressive chemicals (sulfuric, hydrochloric, caustic, or solvent-based circuits) - including lining integrity, gaskets, and material selection.Maintain critical safety devices: pressure relief valves, rupture discs, emergency isolation valves, gas detection, flame monitoring systems.3. Aluminum Alloy Manufacturing SupportMaintain melting/holding furnaces - burner management systems, recuperators, thermocouples, charge well tilting mechanisms.Manage molten metal contact components (launders, troughs, spouts, degassing rotors) - preventive change-outs to avoid refractory failures.Maintain casting equipment: water cooling systems, mold tables, hydraulic shears, billet handling.Ensure hot work and molten metal area safety protocols are integrated into all maintenance permits.4. General Engineering WorkshopManage compressed air systems (dryers/filters), overhead cranes (periodic statutory inspection), forklifts, and general lifting tackle.5. People & Contractor ManagementLead, train, and schedule mechanical, electrical, instrumentation, and welding technicians (direct and indirect).Develop skills matrix - especially for hazardous area work, hot work, confined space entry, and chemical handling.Manage external contractors for specialist work (refractory installation, NDT, high-voltage, thermography).6. Budget & Spares OptimizationPrepare and control maintenance budget (labor, materials, third-party services, consumables).Manage critical spares strategy 7. Reliability & Continuous ImprovementLead root cause analysis (RCA) for unplanned failures - especially chemical leaks, furnace refractory failures, or pump seal failures.Track Overall Equipment Effectiveness (OEE) .Implement reliability improvements (e.g., upgraded seal materials, better refractory design, machine PM optimization).8. HSE & ComplianceIssue and audit safe work permits (hot work, confined space, work at height, electrical isolation, line breaking for chemical lines).Ensure statutory inspections: pressure vessels, cranes, lifting equipment, electrical systems, fire suppression.Lead maintenance contribution to process hazard analyses (HAZOPs) and pre-startup safety reviews (PSSRs).Fixed Salary: 50 K Takehome+ PF+Medical Insurance (As Per interview performance & Experience based )C License Holder & B License Holder Shift Timing: 8 hrs Rotational / 1- Rotational WeekOff Overtime (OT) Policy - OT eligibility and applicable OT rates 1.5 TimesPF & ESI - ApplicableCab / Transportation Facility: Oragadam Pickup pointAccommodation - Near Kandigai / Oragadam ( Company Provided)Food Facility / Meal Allowance - BF, Lunch and Dinner based shift basis and We provided on subsidy for the foodNo of openings: 5 Male Candidate only Interview round: HR Round - MD Round Immediate Joiner Must Work Location:, Oragadam, Ezhichur Village(Sriperumpudur Taluk,Kanchipuram(DT) - 603 204)

Our Recruitment is Rushing up so grab it quickly to get a job within a week.Criteria:Qualification:DIP,BE/B.Tech MECH/EEE/ECE/ARTSDesignation: Graduate Engineer traineeRole: Quality / Production/Assembly/ maintenanceEligible batches: 2020-2025Work Location: Around ChennaiSalary: 18 to 25k+ OTShift : Rotational Shift/Food /transport and accommodation freeJob Type: Permanent & Full timeFor further details contact:Hedwell technologiesNo.2/6, Banu Avenue, Tambaram Sanatorium, Chennai 600 047

Our Recruitment is Rushing up so grab it quickly to get a job within a week.Criteria:Qualification:DIP,BE/B.Tech MECH/EEE/ECE/ARTSDesignation: Graduate Engineer traineeRole: Quality / Production/Assembly/ maintenanceEligible batches: 2020-2025Work Location: Around ChennaiSalary: 18 to 25k+ OTShift : Rotational Shift/Food /transport and accommodation freeJob Type: Permanent & Full timeFor further details contact:Hedwell technologiesNo.2/6, Banu Avenue,Tambaram Sanatorium, Near by IOB BankChennai - 600 047

Job Title: Transformer Production TraineeJob Purpose:To assist in the manufacturing, assembly, and testing of transformers while gaining hands-on experience and developing technical expertise in transformer production processes.Key Responsibilities:Transformer Assembly:Assist in winding coil assemblies and assembling cores.Support insulation installation and tank fabrication.Work on assembling auxiliary components as per design specifications.Quality Control:Conduct basic inspections of transformer components during production.Ensure compliance with manufacturing standards and rectify minor defects.Learn the use of testing equipment for initial validations.Technical Support:Aid senior engineers in troubleshooting production issues.Help prepare reports and logs documenting assembly and testing results.Training & Development:Participate in training sessions focused on production techniques, safety protocols, and quality assurance.Gain knowledge of industry standards like ISO, IEC, and other quality frameworks.Collaboration:Work closely with production teams to meet manufacturing deadlines.Coordinate with supervisors to ensure seamless workflows.Required Skills:Basic knowledge of electrical and mechanical systems.Familiarity with production tools and machinery (training provided).Strong attention to detail and ability to follow instructions accurately.Willingness to learn and adapt in a dynamic manufacturing environment.Qualifications:Diploma or degree in Electrical Engineering, Mechanical Engineering, or related fields.Freshers or candidates with 01 years of manufacturing experience are preferred.Positive attitude towards hands-on learning.Work Environment:Production floor or workshop-based role with exposure to assembly tasks and testing equipment.Opportunity to advance to skilled roles with experience and training.

Key Responsibilities:1. Equipment Maintenance and Troubleshooting2. Service Support like Providing remote support for clients & team.3. Ensure timely solution of service calls and maintain service records.4. Prepare and maintain detailed service reports, manuals, and guidelines.5. Document maintenance schedules and procedures for clients.6. Followenvironmentalregulationsduringplantmaintenanceandoperations.

1. Equipment Maintenance and Troubleshooting 2. Service Support like Providing remote support for clients & team . 3.Ensure timely resolution of service calls and maintain service records. 4.Prepare and maintain detailed service reports, manuals, and guidelines. 5.Document maintenance schedules and procedures for clients. 6.Follow environmental regulations during plant maintenance and operations.