Embedded Job Vacancies in Noida

We are seeking a skilled MLOps Engineer to lead the automation of the ML lifecycle from training to deployment. You will manage scalable CI/CD pipelines, containerized workflows, and performance monitoring across multiple deployment targets.

Job SummaryTo work on bare metal development for Micro-controller based Embedded applications; Embedded C based Firmware Design, Development and testing. Candidate should be able to design and understand Embedded and Programmable hardware, Power Electronics, Analog and Digital Circuits, Communication Protocols.Responsibilities and Duties1. Work on Firmware and Software coding for micro-controllers 8bit and 32bits, debugging, and testing2. Design and development embedded Firmware, logic, and architecture3. Work on testing, troubleshooting, and bug-fixing firmware codeRequired Experience, Skills and QualificationsB. Tech (E & C) or equivalent with 0 to 2 years of RELEVANT experience.Expectations / Desirable: Knowledge of C programming is prime requirement, also data structure and working of programmable devices, micro-controllers, communication protocols, and basic concepts in embedded electronics, digital and analog electronics. Exposure to 8051 core based 8 bit and ARM based Controllers, Eclipse IDE, Understanding of ARM Micro- controllers and Programmable devices. prior hands on with STM32 or similar microcontrollers is preferable.Benefits We observe flex-timing, flat work culture, working on core Electronics application with latest components and technologies.SalaryFor freshersProbation Duration: 6 monthsSalary during probation: 12,000 - 15,000 /month (based on performance in selection test and later work based performance)After probation:Annual CTC: 2,40,000 - 4,00,000 /yearThis salary range is applicable to 1-2 years experience candidates.' Selection will be on the basis of offline test and interview for all applicants.'Candidates are preferred from Delhi NCR RegionCan also send resume to HR@geotechsystems.in''

Technical skills requried- Clear fundamentals of Analog and Digital Electronics.Knowledge of Full Hardware Design Life CycleKnowledge of Circuit Simulation (PSPICE, NI Multisim, etc)Hand- On experience of HW designing rules, PCB Layout in Cadsoft Eagle/Altium Designer or any other open source tool.Should have knowledge & experience of designing & development of 8/16 bit Microcontroller based close loop control systems and Arduino Platform.Circuit building and Circuit analysis SkillsComponent Data Sheet analysis skills.Hands on experience of utilizing test equipment's like DMM, Oscilloscopes, Logic Analyzer, Function/Signal generator , Solder Station (SMD/DIP).Knowledge about Board Bring Up process.Knowledge about Protocols :- Ethernet, Wi-Fi, USB, Serial interfaces(SPI, I2C, RS485, RS422, RS232).Experience in Embedded C programming, embedded system integration and can develop test cases for the same.Knowledge of IOT Open Source Programming / DevelopmentInterested candidates can contactJasmeet - 7428397715Responsibilities:Candidate will be responsible for research & development of M2M/IOT productsCandidate will be responsible for end to end embedded system integration. Skills:- Hardware Design, PCB Layout, Arduino, Embedded C programming and Embedded System IntegrationCandidate should have lead the team of atleast 3 people in past and should be able to work with corss-functional teams.

Roles and Responsibilities:Must to have: BPC Embedded with Fox code and AMDP planning functions1. 8+ years of functional experience in BPC Embedded with Fox code and AMDP planning functions2. Minimum 3 implementation experience out of which at least 1 manufacturing domain.3. The experience on BPC embedded version for S4 HANA 2020 required.4. Finance planning domain experience .5. Good customer facing skills require

Position : Senior Software Engineer Embedded-C Location: NCR (Noida sector 80)Experience: - 4+ yearsRequired Qualification: B.E/B. Tech - ElectronicsEssential Skills required for Senior Software Engineer: Experience with Embedded system design and development with C language. Well versed with 8/16/32 bit microcontrollers and its peripherals. Well versed with communication protocols such as UART, SPI, I2C, CAN and MODBUS Experience in device driver development, hardware board bring up and Free RTOS. Hands on experience in using debuggers, simulators, and oscilloscope. Able to read hardware schematics. Proficient understanding of code versioning tools like Git and SVN. Self-motivated, innovative, willing to pursue new technical areas and capable of working independently.

Embedded Software Engineer duties and responsibilities Study and understanding of technical Specs and of design product as per the requirement. Tender Document review and customizing the meter firmware as per the requirement. Firmware Design and Development for Single Phase and Three Phase Smart Energy meters. Analysis on production failures, field failures and giving corrective actions for the same. Develop, code, test and troubleshoot the system software Analyze, monitor and improve efficiency, stability of the system Interface with hardware design and developmentEmbedded Software Engineer requirements and qualifications 4 to 8 years of experience in embedded software design, development and troubleshooting BS degree in Computer Science or Engineering Good programming experience in C Good knowledge in Algorithm and Logic building Experience in working with 8-bit, 16-bit and 32-bit controllers. Device driver programming, Knowledge on Timer, UART, I2C & SPI protocols, Good Knowledge of Communication Protocol DLMS Knowledge of all metering standards such as IS 13779, IS 14697, IEC 62053, IS 15884 and CBIP standard

Job DescriptionKey responsibilities- Create and deploy OpenBMC firmware with an emphasis on Arm architecture amongother things.- Practical experience configuring BMC firmware, analyzing performance, andimplementing different server manageability features for the company's serverplatforms- Creating error, statistics, and configuration solutions for CPU, GPU, DIMM, SSDs,NICs, IB, PSU, BMC, FPGA, CPLD, and other components to ensure that thecompany's Server platforms are corporate ready.- Creating and designing BMC solutions for performance-optimized active monitoringby utilizing DMTF Standards, such as MCTP, Redfish, SPDM, and PLDM instructions- Writing and automating unit tests for every implemented module, maintainingthorough unit test case reports, and instrumenting code to guarantee optimal codecoverage- Producing software quality reports using CPU load, code coverage, and staticanalysis.- Examining hardware architecture and schematics and influencing hardware design inclose collaboration with hardware teams.Key skills and experience required- 5+ years experience with background in electronics engineering or computerscience, or a Bachelor of Science degree (or higher).- Proficient in developing firmware for X86 or ARM platforms, encompassing featuressuch as BIOS communication, power and thermal management, firmware updates,device monitoring, and firmware security.- Board Bring-up proficiency with practical knowledge of device drivers, including SPI,PCIe, SMBus, Mail-box, and I2C/I3C, in addition to device trees for Linux kernel anduboot.- Experience with OOB or with-band System Management, including exposure to IPMI,KCS, DMTF Standards (PLDM, MCTP, Redfish, etc.), PMBus, NVMe, etc.- Knowledge of REST architecture, particularly with regard to JSON via HTTPs andOAuth.- Proficient in programming and scripting for Linux user-space and system programs,utilizing C/C++, with extensive co

About Us:At S-CUBE, we are into research and development of products in Telecom, Embedded, Automation. Our expertise spans across building wide range of Real Time systems, porting or adapting RTOS to suit embedded application, open-source development and customizing, writing Device drivers, developing middleware applications.Job Description:We are looking for an Embedded Software Engineer with research-oriented mindset. The position focuses on new emerging technologies and its feasibility of being incorporated into existing or new products. The candidate should have high design, analytical and mathematical skills with focus on Algorithms and programming. Position Responsibilities:-Research new technologies & conceptualize it by developing and making prototypes. -Coordinate with the Product Engineering team for new developments and improve existing products.- Developing multiple software architecture suited for the case and implement it. -Developing rapid demo of different technology suited for the product.- Documentation, Paper Presentation & Writing Patents.-Review Code, design & debugging the product. -Creating & Executing software test plans. Key Skills:-Advance knowledge of using C/C++ and Software Design Concepts -Knowledge of Hardware Architecture (ARM, Intel, 8051 Variants) & Product Design.-Good knowledge of operating system, memory management & Device drivers.- Should be proficient in Linux Kernel Programming and System Programming.-Deep knowledge of Data Structures and basic algorithms.-Well aware of new upcoming technologies and frameworks.-Proficient with various on-board communication protocols and methods.

About Us:At S-CUBE, we are into research and development of products in Telecom, Embedded, Automation. Our expertise spans across building wide range of Real Time systems, porting or adapting RTOS to suit embedded application, open-source development and customizing, writing Device drivers, developing middleware applications.Job Description:We are looking for an Embedded Software Engineer with research-oriented mindset. The position focuses on new emerging technologies and its feasibility of being incorporated into existing or new products. The candidate should have high design, analytical and mathematical skills with focus on Algorithms and programming. Position Responsibilities:? Research new technologies & conceptualize it by developing and making prototypes. ? Coordinate with the Product Engineering team for new developments and improve existing products.? Developing multiple software architecture suited for the case and implement it. ? Developing rapid demo of different technology suited for the product.? Documentation, Paper Presentation & Writing Patents.? Review Code, design & debugging the product. ? Creating & Executing software test plans. Key Skills:? Advance knowledge of using C/C++ and Software Design Concepts ? Knowledge of Hardware Architecture (ARM, Intel, 8051 Variants) & Product Design.? Good knowledge of operating system, memory management & Device drivers.? Should be proficient in Linux Kernel Programming and System Programming.? Deep knowledge of Data Structures and basic algorithms.? Well aware of new upcoming technologies and frameworks.? Proficient with various on-board communication protocols and methods. ? Should have sound knowledge in Real time operating systems. If interested, kindly email your

Skills & Requirements :- 2-5 yrs embedded system development experience- Strong C and C++ programming skills and product development experience- Strong background in software methodology and full-cycle development (design, implementation, testing, and debugging)- Experience in the computer networking industry is a plus, especially with routers, switches, wireless access points, firewalls, etc is a plus.- Knowledge of ARM, x86, and equivalent embedded microprocessor architectures.- Experience with Linux environment and operating system. Inter-process communication, threads, sockets, mutex, and networking.- Experience with OpenWRT is a plus.- Source Code Management (git, SVN, Perforce etc.)- Familiarity with Linux, CLI, shell scripting, make files, and cross compilation.Job Responsibilities :- Design and develop firmware for products and services.- Perform design and code reviews and recommend improvements.- Perform testing to validate product architecture and design.- Collaborate with other engineers on technical and design issues.- Develop firmware algorithms to handle exceptional conditions and errors.- Install and verify the firmware on embedded system.- Troubleshoot system, performance and functional issues with firmware.- Evaluate technical specification for correctness and completeness.- Prepare reports on project status, issues and risks for management.

About Us:At S-CUBE, we are into research and development of products in Telecom, Embedded,Automation. Our expertise spans across building wide range of Real Time systems,porting or adapting RTOS to suit embedded application, open-source development andcustomizing, writing Device drivers, developing middleware applications.Job Description:We are looking for an Embedded Software Engineer with research-oriented mindset. Theposition focuses on new emerging technologies and its feasibility of being incorporatedinto existing or new products. The candidate should have high design, analytical andmathematical skills with focus on Algorithms and programming.Position Responsibilities:-Research new technologies & conceptualize it by developing and makingprototypes.-Coordinate with the Product Engineering team for new developments and improveexisting products.- Developing multiple software architecture suited for the case and implement it.-Developing rapid demo of different technology suited for the product.- Documentation, Paper Presentation & Writing Patents.-Review Code, design & debugging the product.-Creating & Executing software test plans.Key Skills:-Advance knowledge of using C/C++ and Software Design Concepts-Knowledge of Hardware Architecture (ARM, Intel, 8051 Variants) & ProductDesign.-Good knowledge of operating system, memory management & Device drivers.- Should be proficient in Linux Kernel Programming and System Programming.-Deep knowledge of Data Structures and basic algorithms.-Well aware of new upcoming technologyWe are looking for 40 Embedded Software Design trainee engineers Posts in Noida, Uttar Pradesh with deep knowledge in c,c Language ,Microcontroller, Embedded Programming and Required Educational Qualification is : B.Tech/B.EInterview venue A-189 Noida sec 63Date - 8th & 9th August Time- 10am To 1 pm

About Us:At S-CUBE, we are into research and development of products in Telecom, Embedded, Automation. Our expertise spans across building wide range of Real Time systems, porting or adapting RTOS to suit embedded application, open-source development and customizing, writing Device drivers, developing middleware applications.Job Description:We are looking for an Embedded Software Engineer with a research-oriented mindset. The position focuses on new emerging technologies and its feasibility of being incorporated into existing or new products. The candidate should have high design, analytical and mathematical skills with focus on Algorithms and programming. Position Responsibilities: Coordinate with the Product Engineering team for new developments and improve existing products. Developing multiple software architectures suited for the case and implementing it. Developing rapid demos of different technology suited for the product. Documentation, Paper Presentation & Writing Patents.Key Skills: knowledge of using C/C++ and Software Design Concepts Knowledge of Hardware Architecture (ARM, Intel, 8051 Variants) & Product Design. Deep knowledge of Data Structures and basic algorithms.Interested candidates may visit to company premises for interview . Interview venue : Satyam Software Solutions Pvt. Ltd. (S-CUBE)A-189, Sec 63, Noida Interview date : 25th & 26th Aug 2022 Interview Time : 11 A.M. - 1 P.M. Contact Person : Mrs. Swati

Key Skills:knowledge of using C/C++ ,Hardware Architecture (ARM, Intel, 8051 Variants),Data Structures and basic algorithms.Roles & responsibilities:Research new technologies & conceptualize it by developing and making prototypes. Coordinate with the Product Engineering team for new developments and improve existing products. Developing multiple software architecture suited for the case and implement it. Developing rapid demo of different technology suited for the product.Walkins details ;Interview date : 16th July 2022Interview time : 11 am -1 pm & 2 pm -4 pm Interview venue : A-189, Sec 63, Noida Contact Person: Ms. Swati Interview Process :1) Written Technical test 2) Technical PI 3) HR round

Role and Responsibilities:1. 8+ years of functional experience in BPC Embedded with Fox code and AMDP planning functions2. Minimum 3 implementation experience out of which at least 1 manufacturing domain.3. The experience on BPC embedded version for S4 HANA 2020 required.4. Finance planning domain experience .5. Good customer facing skills require

Job SummaryTo work on micro-controller based design and development of Embedded Firmware, Algorithms, Device drivers, Communication Protocols, Embedded Application and development of Libraries, Design and development and understanding of Embedded Electronics Hardware, Programmable Electronics, interfacing of micro-controllers, programmable devices, communication bus and protocols.Responsibilities and DutiesDesign and development of Firmware, Algorithms, Device Drivers, Library, Communication Protocols, IOT with sound understanding of Embedded Electronics Hardware.Required Experience, Skills and QualificationsB. Tech Electronics and Communication or equivalent with 2+ years of relevant experience.Job Type: Full-time