Embedded Engineer Graduate Jobs in Mumbai

As a Customer Support Engineer, you will be responsible for providing technical support to customers for video conferencing hardware installation, computer networking, and embedded Linux systems. Your key responsibilities will include troubleshooting customer issues, performing hardware installations, and providing excellent customer support via phone, email, or in person.You should possess strong skills in video conferencing hardware installation, computer networking, and embedded Linux systems. The ideal candidate must have a minimum of 2-3 years of experience in a similar role and hold a graduate degree. You should be able to work well under pressure, have excellent communication skills, and be able to effectively troubleshoot and resolve technical issues for customers. The ability to work independently and manage your time efficiently is essential for success in this role. This is a full-time position located in Vikhroli West, Mumbai, with the requirement to work from the office.

Service Engineer Roles and Responsibilities: Attend/resolve defects/faults observed in Systems Installation of RHEL OS, user management, network configuration, etc. Application softwares installation,System configuration as per installation procedure, Defect identification and defect resolution (DI/DR) of software issues and other maintenance related issues. Collection of data logs and any other logs (wire shark, RHEL logs) Assembly/De-assembly as per system documents or Computer based training (CBT)software Identification/Localization of hardware defects, resolution of defects as per hardware manuals Maintain logbook for all observed/reported problem and action taken to resolve the problem

Key Responsibilities :-Embedded Systems Firmware Development on various Platforms and Architecture.-Testing.-Documentation.-Hardware Planning.-Validation.-Client Coordination and Tech Support.-Manage and Improve Existing Codes.-Debug.-Guide and Assist other team members.-UI Design.Essential Skills:-Logic Building Skills-Knowledge of MCU Architecture-Engineering Maths-Embedded C-Knowledge of Compilers, IDE etc-Hardware Knowledge-Basic Electronics Knowledge-Essential MCU Peripherals (Timer, E2P, ADC, PWM, etc)-Protocols (I2C, SPI, Serial etc)-Good Common Sense and Aptitude-Passion to learn more things-Discipline, Punctuality, Flexibility, Team Spirit, MaturityMUST HAVE.....>I2C.>SPI.>RTC.>ADC.>PWM.>Modbus.>Calibration.>AT Commands of GSM Modems.GOOD TO HAVE.....> Knowledge Control Algorithms example PID, Fuzzy Logic.> RTOS.Qualification :BE/BTech in Electronics, Instrumentation, ExTC etc.BSc IT or Computer Engineering / Computer Science Candidates shall also be considered.

ob Role: Trainee Software Engineer 100+ PositionsQualification: B.Tech/ BE (CS, IT, ECE, EEE) 2019/ 2020/2021 Batches.Eligibility: 60 % throughout academics without any backlogsPackage: 3.0 LPA 3.25 LPAJob Location: Mysore/Baroda/Mumbai/Bangalore** Candidates who have applied in last 3 months are not eligible for this position.Job RequirementGood knowledge in C. C++/Embedded C, Linux Programming areasSQL Server programmingGood communication SkillsC. C++/Embedded C, Linux, Operating SystemRegistration ProcessFor Registration, candidate needs to click below LinkA valid ID proof, scanned photograph and resume are mandatory for registration process. The Registration and Test should be taken using a PC/ Laptop with Webcam facility.Candidates are advised to attend the test when they have all the documents and system ready.Online-Assessment Test:Once registration is completed and details are verified, it shall automatically take the candidate to the assessment page. (Note- The assessment shall take 90 minutes)The Online Assessment will comprise of Analytical, Quantitative, Verbal ability and Technical questionsPost Online Assessment, the shortlisted candidates will be intimated about the results through email and invited for Technical and HR Rounds.Selection Process:1. Online Registration & Assessment Test: (Analytical, Quantitative, Verbal Ability and Technical)2. Technical and HR Interview3. Training Period: 2 Months (1 Month on job Training & 1- Month Technology Training)4. Post-Training Project Assessment.** Selected Candidates are expected to give 24 Months Service Commitment

Job Title: Hardware EngineerLocation: Grant Road, MumbaiJob Description:We are seeking a motivated and detail-oriented Hardware Engineer to join our team. The ideal candidate will be responsible for designing, testing, and maintaining hardware components for various systems.Key Responsibilities:Design, assemble, and test electronic hardware components.Troubleshoot and resolve hardware-related issues.Collaborate with the development team to ensure system efficiency.Maintain documentation of hardware designs and procedures.Requirements:Bachelor's degree in Electronics, Electrical, or related field.1 to 3 years of relevant experience in hardware engineering.Strong problem-solving skills and attention to detail.Good knowledge of circuit design and troubleshooting techniques.Salary: 15,000 to 25,000 per month

As an embedded systems executive at KVAR Technologies Private Limited, you will have the exciting opportunity to utilize your expertise in embedded systems, C programming, Arduino, C++ programming, Internet of Things (IoT), Raspberry Pi, ARM Microcontroller, Python, and circuit design. You will play a crucial role in developing cutting-edge solutions for our clients and contributing to the growth and success of our company.Key responsibilities:1. Design and develop embedded systems solutions for various projects2. Write efficient and well-documented code in C, C++, Python, etc.3. Implement IoT technologies and integrate them into existing systems4. Work on ESP32, STM32, Rpi, Jetson based projects5. Design and test circuits to ensure functionality and performance6. Collaborate with cross-functional teams to deliver high-quality products7. Stay updated with the latest trends and technologies in embedded systems and IoT to drive innovation and excellence in our projectsIf you are a passionate and skilled professional with a strong background in embedded systems and a drive to excel in a dynamic work environment, then this role is perfect for you. Join us at KVAR Technologies and be a part of a team that is dedicated to pushing boundaries and creating impactful solutions.

Responsibilities: Design and develop embedded hardware systems for various industrial applications Analyze system requirements, develop hardware architectures, and select appropriate components Create schematics, layouts, and test plans for embedded hardware designs Implement firmware and software for embedded systems using C and C++ Troubleshoot and debug hardware and software issues Collaborate with cross-functional teams to ensure seamless integration of hardware and software components Stay updated with the latest advancements in embedded hardware technologiesRequirements: Bachelor's or Master's degree in Electrical Engineering, Computer Engineering, or a related field Strong understanding of embedded hardware design principles and practices Proficient in C and C++ programming languages Experience with embedded hardware development tools and techniques Excellent communication and interpersonal skills Ability to work independently and as part of a teamPerks: Medical Insurance

Execute full software development life cycle (SDLC)Develop flowcharts, layouts, and documentation to identify requirements and solutionsWrite well-designed, testable codeIntegrate software components into a fully functional software systemDocument and maintain software functionalityTroubleshoot, debug and upgrade existing systemsComply with project plans and industry standardsEnsure software is updated with latest featuresShould be well versed in .NET and C#.

Developing firmware for robust embedded system devices Active involvement in designing architecture, communication protocols & selection of technology. [Knowledge of protocols such as MQTT, CoAP, HTTP, TCP, UDP, RS485, RS232, Modbus, etc] Designing test cases and active participation in testing Team building and grooming new members.Candidate Skill Set Thorough knowledge and hands on experience of Embedded C programming. Experience of firmware development on multiple microcontroller families like AVR, MSP430, STM32,Renesas, etc. Strong programming & debugging skills. Knowledge of IDEs like Keil, AVR Studio, IAR, Cubesuit will be an added advantage. Hands on experience of working on wireless communication (BLE, Wi-Fi, Zigbee, LoRa, GSM/ GPRS)

We are looking for passionate electronics engineer for the development of embedded system. Applicant must have fundamental hardware knowledge along with software development skill.Your primary job will be to understand system requirement, design circuits / hardware, prototype creation and develop the software for embedded system.Responsibilities and DutiesUnderstand project specification and requirement.Decide components to be used in developmentSchematic, Hardware design.Hardware prototype making.Write firmware in C language for microcontroller based embedded system.Hardware fault finding and solving.Ensure the performance, quality, and responsiveness of applications.Identify and correct bottlenecks and fix bugs in firmware.Required Skill:Hardware:Basic hardware fundamentals should be clear i.e.- Voltage, Current, Power, Diode, Capacitor, Resistor, Transistor, MOSFET, Op-Amp, Relay, Opto-Isolator, voltage regulator etc.Having practical experience in circuit and schematic designingPrototype making on GPB or PCB.Having hardware fault finding skill in designed circuits.If having PCB Design knowledge then it will be helpful.Software:Different microcontroller architecture knowledge like 8051, ARM-STM32 / LPC, ATMEGA, PIC, STM8Programming language: C / C++.Controller peripheral working knowledge like Timer, UART, I2C, SPI.Should know IDE, Compiler's feature and way of working.Should have knowledge and Hands-on Experience with RTOS for Sr. Engineer.Should know various debugging technique to debug issue in code.Capability of Logic Development and prepare code architecture for any new system development.Management:Project and task planning.Must have ability to handle entire project alone or in team work.

Embedded Job DescriptionKey Responsibilities: Design and development of embedded and IoT devices. Good Knowledge of C, C++, Python. Good Knowledge of Hardware Interface protocols like SPI, UART, I2C etc. Programming of embedded and IoT Devices. Research and development of new technologies. Schematic and PCB Designing checking. Testing of Embedded/IoT devices (software and hardware) Testing documentation. Troubleshooting of hardware problems.

He / She will be designing and developing 32 bit Microcontroller based System with High-bits ADC and signal conditioning circuit. Exceptional hardware design skills - digital and analog. Experience of component selection for a System design. Schematic Preparation and Simulation Contribute to PCB layout design Write technical documentation, participate in design meetings Design for EMI/EMC & IPC standard compliance. Design as per EMI & EMC, IPC,UL,CE and ATEX compliance Experience with Memory interfaces (DDR2,SATA,USB,LVDS) Experience in high voltage switching mode power supply design. Experience of Board bring-up Experience of designing with ARM 9, ARM Cortex-A8, ARM Cortex-A9 and DSP will be plus. Worked on various interfaces: UART, SPI, I2C, Ethernet, PCI, USB etc. Worked with various OP-AMP and filters will be plus Experience in control algorithm/Motor algorithm/Motor control/Drive control Experience of high-speed ADC and DAC based designs. Should be self-starter and possess good leadership quality. *****Should know about circuit design, microcontroller design, smps switching ******* Qualification : BE EXTC or equivalent degreeLocation : Mumbai

We are #hiring Senior Firmware Developers. Who could join us immediately or within 30 days.Designation : Senior Firmware DeveloperExperience required : 4 years to 8 yearsLocation: Mumbai (Kurla)Salary : 7L to 15 L Per Annam depend on interview and relevant work experiencePreferred Interview mode: In PersonJoining: Immediate / within 30 DaysSkillset:MQX, C++Controller IMXRT seriesAES 256bit Encryption, PKIUSB, EthernetProducts Security devices, Printer, MEMs, Voltage and Current sensors etchands on/working experience on encryption AES 256Desired Profile:Senior resource who can work independentlyEmbedded CLPC55 series controller 32 bitUSB, AES Encryption, PKI certificationProducts Security devices, Printer, MEMs, Voltage and Current sensors etchands on/working experience on encryption AES 256

We are specialize in the manufacturing, sales and after sales service of electronics and Various Range of Products focused on industrial safety and quality control. We also specialize in providing information technology (IT) solutions and services for asset management, security and enhanced efficiency of any organization.To expand we have a very urgent opening as mentioned below.Position - Sr. Embedded Software EngineeringLocation MumbaiSalary - Open Qualification - BSc, MSc, Degree or B.E in Instrumentation, Electronics, Quality Control, Electronics & telecommunication, Degree / Dip or BE / B.Tech- in Electronics or Instrumentation Eng. Graduate preferredExperience- 4 yrs + Roles & Responsibilities:Design and development software of embedded devices and systems from requirements to production, C, C++, Python, RASBERRY PI, Hardware Interface protocols like SPI, UART, I2C etc. Schematic and PCB Designing checking, Testing of Embedded/IoT devices (software and hardware), Documentation of design documents, flow charts, algorithms and implementation details, troubleshooting of hardware problems, must have Hardware & Software troubleshooting skills, should be able to support/debug system integration, Understanding of AC/DC measurements and control loops are preferred. Design develop code, test and debug systems software. Review code and design.

Following is the requirement For Embedded Firmware EngineerExperience: 2yrs- 6yrsCTC: 3LPA 8LPATotal Vacancy - 9JOB DESCRIPTION : He/She will be designing and developing firmware on ARM Micro controller based System with High-bits ADC and signal conditioning circuit. Coding experience on ARM controller is must. Working with 24- bits ADC will be a plus Extra ordinary analytical skill In Depth Understanding of Firmware Development and SDLC is required & should follow Software Documentation as per ISO requirement. Working with C and RTOS Embedded Programming. Good in C & Assembly Language Programming. Should be self starter and possess good leadership quality.Kirti Gaikwad

Sound experience in design of digital and mixed signal circuits using microcontrollers/microprocessors. Experience in high-speed interfaces. Strong component selection skills like MCUs, SDRAM, DDRs, EEPROMs etc... on automotive application designs Hands on experience of design & debugging different communication interfaces likeI2C, SPI, RS232, RS485, CAN, BLE, external memories, LCD & touch screeninterfaces etc. Strong knowledge in analog and mixed embedded system design by using 8bit/16/32bit micro controllers or processors. TIs MSPxxx series, NXP, Si-Labdevices, Analog devices, Qualcomm, etc. Knowledge of RF/Antennas, design and testing of RF signal chain (transmit and receive) design. Experience in design for EMI-EMC compliance, resolution of EMI-EMC issues. Knowledge on AEC-Q100, AEC-Q101, AEC-Q104 and AEC-Q200 standards Knowledge on HW Timing analysis, Signal Integrity concepts Experience with requirement analysis, hardware specification, testing, and validation of hardware modules in automotive domain Sound experience in resolving field / customer anomalies, manufacturing issues by using techniques like RCA (Root Cause Analysis), 8D, 5 Why or similar methods. Experience in design level, design for safety like meeting UL requirements. Design for certification like UL, TUV etc... Obsolescence management, preparing BOM in the most efficient way and execution. Hands on experience with Multi- meters, Oscilloscope, Function Generator, Logic analyzer etc. Performing, optimizing & resolving the failures of EMI, EMC, Automotive EMC/Transient measurements and duration of tests as specified in the measurement requirement. Collaborating with software engineers to ensure software compatibility and integration with the hardware components Proficiency in circuit analysis, circuit simulation using PSpice /MATLAB/Agilent ADS and circuittolerance analysis. Familiarity with multiple embedded development environments including Keil, Eclipse,

Role: Junior Software EngineerDesired Qualification: B.Tech/M.Tech - CSE/IT/ECESkills:1. Only 2020 & 2021 (No-Backlogs) pass-outs are eligible2. Excellent in verbal and written communication skills. 3.Should be good at problem solving and logical thinking.4.Should have Good analytical skills.5.Must have good knowledge in C, C++, Java, Embedded C, Android6.Excellent Communication Skills, both written and oral7. Presentation Skills.8. Self-Driven9. Persistent and willingness to perform under pressureInterested candidates can Please share your updated Resumes to the

Must-Have Great C Coding Skill.Design and implement software of embedded devices and systems from requirements to production and commercial deployment.Design, develop, code, test, and debug system software.Review code and design.Analyze and enhance efficiency, stability, and scalability of system resources.Integrate and validate new product designs.Support software QA and optimize I/O performance.Provide post-production support.Interface with hardware design and development.Well known in C coding and debugging in hardware.Experience in hands-on development and troubleshooting on embedded targets.Familiarity with software configuration management tools, defect tracking tools and peer review.Adequate knowledge of reading schematics and datasheets for components.Strong documentation and writing skills.

Developing firmware for ARM, ESP and other micro-controllers based embedded systems using embedded C and RTOSWorking on different communication technologies like Bluetooth, BLE Mesh, Wi-Fi, Ethernet, USB, etc.

Responsibilities: Design and develop embedded hardware systems for various industrial applications Analyze system requirements, develop hardware architectures, and select appropriate components Create schematics, layouts, and test plans for embedded hardware designs Implement firmware and software for embedded systems using C and C++ Troubleshoot and debug hardware and software issues Collaborate with cross-functional teams to ensure seamless integration of hardware and software components Stay updated with the latest advancements in embedded hardware technologiesRequirements: Bachelor's or Master's degree in Electrical Engineering, Computer Engineering, or a related field Strong understanding of embedded hardware design principles and practices Proficient in C and C++ programming languages Experience with embedded hardware development tools and techniques Excellent communication and interpersonal skills Ability to work independently and as part of a teamPerks: Medical Insurance

Responsibilities: Design and develop embedded hardware systems for various industrial applications Analyze system requirements, develop hardware architectures, and select appropriate components Create schematics, layouts, and test plans for embedded hardware designs Implement firmware and software for embedded systems using C and C++ Troubleshoot and debug hardware and software issues Collaborate with cross-functional teams to ensure seamless integration of hardware and software components Stay updated with the latest advancements in embedded hardware technologiesRequirements: Bachelor's or Master's degree in Electrical Engineering, Computer Engineering, or a related field Strong understanding of embedded hardware design principles and practices Proficient in C and C++ programming languages Experience with embedded hardware development tools and techniques Excellent communication and interpersonal skills Ability to work independently and as part of a teamPerks: Medical Insurance

Key Responsibilities :-Embedded Systems Firmware Development on various Platforms and Architecture.-Testing.-Documentation.-Hardware Planning.-Validation.-Client Coordination and Tech Support.-Manage and Improve Existing Codes.-Debug.-Guide and Assist other team members.-UI Design.Essential Skills:-Logic Building Skills-Knowledge of MCU Architecture-Engineering Maths-Embedded C-Knowledge of Compilers, IDE etc-Hardware Knowledge-Basic Electronics Knowledge-Essential MCU Peripherals (Timer, E2P, ADC, PWM, etc)-Protocols (I2C, SPI, Serial etc)-Good Common Sense and Aptitude-Passion to learn more things-Discipline, Punctuality, Flexibility, Team Spirit, MaturityMUST HAVE.....>I2C.>SPI.>RTC.>ADC.>PWM.>Modbus.>Calibration.>AT Commands of GSM Modems.GOOD TO HAVE.....> Knowledge Control Algorithms example PID, Fuzzy Logic.> RTOS.Qualification :BE/BTech in Electronics, Instrumentation, ExTC etc.BSc IT or Computer Engineering / Computer Science Candidates shall also be considered.