Electrical Drawing Jobs

Candidate should be qualified in any of the following discipline (Diploma or BE - EEE, ECE )First Preference given for Female CandidateSoftware Exposure : Auto CadJob Responsibilities:*Designing of Lighting, Power Control Layout and Piping Layout.*Designing of SLD Load Matrix, BOQ & SLD Preparation.*BOQ Preparation.

Job Summary We are looking for an experienced Senior Executive / Engineer - Electrical & Instrumentation (E&I) for an industrial project site in Mundra, Gujarat.The candidate will be responsible for instrumentation maintenance, calibration, loop checking, control valve and MOV troubleshooting, commissioning, field instrumentation, automation system interface, and E&I field execution.The ideal candidate should have strong hands-on experience in industrial/process plant environments and be capable of independently handling field troubleshooting, maintenance, testing, and commissioning activities.Key ResponsibilitiesInstrumentation & Maintenance Perform calibration, testing, maintenance, and troubleshooting of field instruments such as Pressure, Temperature, Level, Flow, RTD, and Thermocouple instruments. Carry out installation, mounting verification, configuration, testing, and commissioning of field instruments. Perform preventive and corrective maintenance of instrumentation systems. Troubleshoot instrument faults and minimize equipment/plant downtime. Handle installation and troubleshooting of vibration sensors for rotating equipment.Control Valves & MOV Perform control valve inspection, stroke checking, calibration, testing, and troubleshooting. Work on Globe, Diaphragm, Gate, Ball, and Butterfly valves. Troubleshoot Motor Operated Valves (MOVs), actuators, feedback signals, interlocks, and control circuits. Conduct functional testing of valves and associated control loops.Loop Checking & Commissioning Execute complete instrument loop checking from field instruments to PLC/DCS/SCADA systems. Perform cable continuity, termination, signal verification, and loop integrity checks. Identify and rectify wiring, signal, polarity, termination, and instrumentation faults. Participate in pre-commissioning, commissioning, cold commissioning, hot commissioning, and start-up activities. Verify field signals, alarms, trips, permissives, and interlocks. . of automation and control systems.Instrument Configuration & Calibration Use HART 375/475 Communicators, Smart Calibrators, TRACS, pressure calibrators, loop calibrators, and multimeters. Configure and troubleshoot smart field instruments. Perform instrument ranging, parameter configuration, diagnostics, and calibration. Maintain proper calibration and testing records.Industrial Communication Troubleshoot industrial communication systems and protocols such as:o HARTo Profibuso Foundation Fieldbuso Industrial Etherneto Industrial Wireless Coordinate with automation/control teams for communication-related issues.Engineering Documentation Read and interpret:o P&IDso Instrument Hook-up Drawingso Instrument Loop Diagrams (ILDs)o Cable Scheduleso Instrument Datasheetso Wiring/Termination Drawingso Instrument Indexo I/O Listso Plant Layouts Verify instrument tagging, installation, cable termination, and field wiring against approved project drawings. Maintain accurate records of calibration, loop checking, testing, maintenance, and commissioning activities.Required Skills Strong hands-on experience in Instrumentation & E&I field activities. Good knowledge of process instrumentation and calibration. Experience in loop checking and commissioning. Practical knowledge of control valves and MOVs. Experience with PLC/DCS/SCADA/HMI systems. Knowledge of VFD configuration and troubleshooting. Hands-on experience with HART Communicator 375/475 and calibration equipment. Knowledge of industrial communication protocols such as Profibus, Foundation Fieldbus, HART, and Ethernet. Ability to read and understand P&IDs, ILDs, Hook-up Drawings, wiring diagrams, and instrument datasheets. Good troubleshooting and problem-solving abilities. Good coordination and communication skills.Qualification B.E. / B.Tech in Instrumentation Engineering or a related engineering discipline from a recognized university/institute.Experience 3-5 years of relevant experience in E&I field execution, instrumentation maintenance, commissioning, or plant operations. Candidates with experience in power plants, process plants, chemical/petrochemical plants, oil & gas, manufacturing, or other heavy industrial projects will be preferred.Candidate Profile Strong field execution and troubleshooting capability. Ability to work independently at an active industrial project site. Good understanding of industrial safety and permit-to-work procedures. Willingness to work at Mundra, Gujarat. Candidates who can join immediately or within 15 days will be preferred. Willingness to relocate to Mundra for the project duration.

Qualification: Diploma / B.E. / B.Tech in Mechanical or Electrical EngineeringIndustry: Real Estate / ConstructionJob Summary:We are looking for an experienced MEPF Engineer to supervise and coordinate Mechanical, Electrical, Plumbing & Firefighting works at project sites. The role involves site execution, contractor/consultant coordination, drawing & BOQ review, quality inspection, testing & commissioning, and ensuring timely completion of MEPF works.Key Responsibilities:Supervise MEPF site execution and installationsReview drawings, BOQs and technical specificationsCoordinate with contractors, consultants, architects and site teamsMonitor HVAC, electrical, plumbing and firefighting worksConduct site inspections and resolve technical issuesCheck material quality and contractor workAssist in quantity estimation and bill verificationPrepare DPRs and maintain project documentationEnsure safety, quality and project timelinesRequirements: 2-8 years of relevant MEPF site-execution experience Real estate/construction project experience Knowledge of HVAC, Electrical, Plumbing & Firefighting AutoCAD & MS Excel knowledge Good site coordination and communication skills

Job Title: Electrical Project EngineerExperience: 4-5 yearsJob Summary:Responsible for planning, executing, and completing electrical projects on time, within budget, and according to quality and safety standards.Key Responsibilities:Plan and manage electrical project activities from design to commissioning.Prepare electrical drawings, BOQs, schedules, and technical documents.Coordinate with clients, consultants, contractors, and internal teams.Supervise electrical installation, testing, and commissioning.Monitor project progress, costs, materials, and timelines.Review designs, vendor documents, and equipment specifications.Resolve technical issues and ensure compliance with electrical codes and safety standards.Prepare progress reports and project documentation.Requirements:Bachelor's degree in Electrical Engineering.4-5 years of experience in electrical project execution.Knowledge of power distribution, switchgear, MCCs, transformers, cables, and control systems.Proficiency in AutoCAD and Microsoft Office; knowledge of project management software is an advantage.Strong coordination, communication, problem-solving, and leadership skills.

We are an authorized Channel Partner of Amara Raja Power Systems and are engaged in the Operation & Maintenance (O&M) of IPS (Integrated Power Supply) systems used for Railway Signalling applications. We are looking for suitable candidates for the position of IPS Maintenance & Operation Technician/Engineer.The candidate will be responsible for operation, routine maintenance, preventive maintenance, fault finding, troubleshooting, testing and servicing of IPS systems and associated signalling power supply equipment at railway installations. Candidates with experience in Railway Signalling, IPS, battery systems, electrical/electronic maintenance or power supply systems will be preferred.

Job description:Job Description - Electrical Draftsman / Electrical DrafterCompany: Ematrix Consulting Engineers Pvt. Ltd.Department: Electrical DesignLocation: BengaluruPositions: 2Position 1 - Junior Electrical DrafterGender: FemaleExperience: 1 yearQualification: Diploma / BE / B.Tech in Electrical Engineering or related fieldPosition 2 - Senior Electrical DrafterGender: MaleExperience: 10 yearsQualification: Diploma / BE / B.Tech in Electrical Engineering or related fieldJob SummaryWe are looking for skilled Electrical Draftsmen/Drafters to join our Electrical Design team. The candidates will be responsible for preparing accurate electrical drawings, layouts, schematics, and design documentation based on project requirements and engineering inputs.The Senior Electrical Drafter will be responsible for handling projects independently, reviewing drawings, coordinating with engineers and other disciplines, and guiding junior drafting team members.Key ResponsibilitiesElectrical Drafting & DesignPrepare detailed electrical drawings and layouts using AutoCAD and other relevant drafting software.Prepare electrical power distribution layouts, lighting layouts, and electrical services drawings.Prepare Single Line Diagrams (SLD) and schematic drawings.Prepare cable routing, cable tray, containment, and electrical equipment layouts.Prepare electrical room layouts and equipment arrangement drawings.Prepare load schedules and other electrical design documentation based on engineering inputs.Develop drawings as per project specifications, applicable standards, and client requirements.Make revisions to drawings based on engineer/client comments.CoordinationCoordinate with Electrical Engineers, HVAC, Plumbing, Fire Fighting, ELV, and Architectural teams.Ensure electrical drawings are properly coordinated with other MEP services.Identify clashes and discrepancies in drawings and communicate them to the concerned engineer.Attend design coordination meetings whenever required.Drawing Quality & DocumentationEnsure drawings are accurate, clear, properly dimensioned, and presented according to company standards.Maintain proper drawing numbering, revision control, and documentation.Review drawings before submission to ensure errors and omissions are minimized.Prepare drawings for client review and approval.Incorporate comments received from clients and consultants.Additional Responsibilities - Senior Electrical DrafterIndependently handle electrical drafting requirements for projects.Review and check drawings prepared by junior team members.Guide and train junior Electrical Draftsmen.Coordinate directly with engineers and project teams regarding drawing requirements.Ensure drawings are completed within project timelines.Assist the design team in resolving drafting and coordination issues.Maintain consistency and quality across all project drawings.Required SkillsStrong knowledge of AutoCAD and electrical drafting.Good understanding of electrical layouts and MEP services.Knowledge of electrical symbols, standards, and drawing conventions.Ability to understand engineering drawings and design inputs.Good knowledge of MS Office and Excel.Ability to work with multiple projects and meet deadlines.Good communication and coordination skills.Strong attention to detail and accuracy.Preferred Skills - Senior PositionMinimum 10 years of experience in electrical drafting/design.Strong experience in building services/MEP projects.Experience handling large-scale commercial, industrial, residential, or hospitality projects.Ability to independently prepare and review complete electrical drawing packages.Experience coordinating with multiple MEP disciplines.Knowledge of Revit MEP/BIM will be an added advantage.Candidate ProfileJunior Electrical Drafter - 1 Year ExperienceMinimum 1 year of relevant electrical drafting experience.Should have good knowledge of AutoCAD.Should be willing to learn and work closely with the Electrical Design team.Good attention to detail and willingness to take responsibility for assigned drawings.Senior Electrical Drafter - 10 Years ExperienceMinimum 10 years of relevant electrical drafting experience.Should be capable of independently handling electrical drafting requirements.Should have strong knowledge of electrical building services and MEP coordination.Should be capable of reviewing drawings and guiding junior team members.Should have good communication and project coordination skills.Key Performance Indicators (KPIs)Accuracy and quality of electrical drawings.Timely completion of drawings.Number of drawing errors/revisions.Effective coordination with other MEP disciplines.Compliance with project/client requirements.Proper drawing documentation and revision control.Ability to meet project deadlines.Note: Candidates should be comfortable working in a professional MEP consultancy environment and handling multiple project requirements as per deadlines.

We are seeking a Senior Electrician based in Surat, India, with 0 to 5 years of experience. The ideal candidate should have graduated with relevant qualifications and demonstrate strong electrical skills.Key responsibilities include:1. Installation and Maintenance: You will be responsible for installing, maintaining, and repairing electrical systems in various settings. This includes ensuring that all work complies with safety standards and regulations.2. Troubleshooting: You will diagnose electrical issues, identify sources of problems, and implement effective solutions to prevent future issues, ensuring systems function efficiently.3. Project Support: You will assist in planning and executing electrical projects, collaborating with the team to ensure timely completion and adherence to specifications.4. Documentation: You will maintain accurate records, including service reports and project documentation, to track progress and ensure accountability in daily operations.5. Team Collaboration: Working closely with other electricians and technicians, you will share knowledge and expertise to foster a productive work environment.Candidates must possess strong technical skills in electrical systems and a solid understanding of safety protocols. Excellent problem-solving abilities and attention to detail are essential. Effective communication skills are necessary for working both independently and as part of a team. The role requires a commitment to quality workmanship and a proactive approach to learning new techniques and technologies in the electrical field.

As an Electrical Design & Estimation Engineer, you will be responsible for the design and estimation of various electrical systems. Your expertise will help ensure projects are completed efficiently and meet quality standards. Your key responsibilities will include:- Design Electrical Systems: Create detailed designs for electrical systems to meet project requirements, ensuring compliance with industry standards and safety regulations.- Prepare Estimates: Develop accurate cost estimates for electrical projects by calculating material, labor, and overhead costs to inform budgeting and bidding processes.- Conduct Site Evaluations: Visit project sites to assess existing electrical systems and gather relevant data, which will inform your designs and estimates.- Collaborate with Teams: Work closely with project managers, architects, and other engineers to integrate electrical designs with overall project plans and requirements.- Review Specifications: Analyze project specifications to ensure that electrical designs align with client expectations and technical requirements.- Maintain Documentation: Keep thorough records of design changes, estimates, and project communications to ensure all stakeholders have access to up-to-date information.To succeed in this role, candidates should possess the following skills:- A diploma in Electrical Engineering or a related field.- 2 to 5 years of relevant experience in electrical design and estimation.- Proficiency in design software such as AutoCAD or similar tools.- Strong analytical skills to assess project requirements and prepare detailed estimates.- Good communication skills to effectively work with team members and clients.- A detail-oriented approach to ensure accuracy in designs and cost estimates.

We are seeking a skilled Maintenance Engineer to join our team in Lucknow. The ideal candidate should have 4 to 6 years of experience and hold a Bachelors degree in Engineering. The role is full-time and requires the engineer to work from our office.Key Responsibilities:- Preventive Maintenance: Regularly perform inspections and maintenance tasks to prevent equipment failures and breakdowns, ensuring operations run smoothly.- Troubleshooting: Quickly identify and diagnose issues with machinery and equipment, implementing solutions to minimize downtime.- Repair Work: Execute necessary repairs on faulty equipment, using hand tools and diagnostic equipment to restore functionality.- Documentation: Maintain accurate records of maintenance activities, repairs, and equipment status, which helps in tracking performance and planning future maintenance.- Collaboration: Work closely with other team members and departments to ensure that equipment meets production needs and safety standards.Required Skills and Expectations:The candidate must have a strong understanding of mechanical and electrical systems related to machinery. Proficiency in using diagnostic tools and an ability to interpret technical manuals and schematic diagrams are essential. The role requires excellent problem-solving skills, attention to detail, and the capacity to work under pressure. Effective communication skills are vital for collaborating with team members and reporting findings to management. Candidates should also demonstrate a commitment to maintaining a safe working environment. Only male candidates need to apply for this role.