Avionics Job Vacancies in Chennai

Job TitleAircraft Maintenance Engineer (AME)DepartmentAircraft Maintenance / EngineeringLocationsChennaiJob SummaryAn Aircraft Maintenance Engineer (AME) is responsible for inspecting, maintaining, repairing, troubleshooting, and certifying aircraft to ensure they are safe, airworthy, and compliant with aviation regulations. The role involves carrying out scheduled and unscheduled maintenance on aircraft systems, engines, avionics, electrical components, hydraulic systems, landing gear, and structural components while adhering to the standards established by aviation authorities.Key ResponsibilitiesAircraft Inspection & MaintenancePerform routine, preventive, scheduled, and unscheduled aircraft maintenance.Conduct daily, transit, weekly, A-check, B-check, C-check, and heavy maintenance inspections.Inspect aircraft structures, fuselage, wings, landing gear, flight controls, and engines.Diagnose and rectify aircraft defects using approved maintenance procedures.Replace, repair, and overhaul defective aircraft components.Ensure all maintenance tasks are completed according to the Aircraft Maintenance Manual (AMM).Troubleshooting & RepairsIdentify mechanical, hydraulic, electrical, pneumatic, and avionics faults.Use specialized diagnostic tools and testing equipment.Repair aircraft systems while maintaining manufacturer specifications.Coordinate with engineering teams for complex technical issues.Perform functional tests after repairs to verify serviceability.Engine & Component MaintenanceInspect aircraft engines for wear, leaks, corrosion, and damage.Perform engine servicing, oil changes, filter replacement, and component inspections.Maintain propellers, Auxiliary Power Units (APU), and fuel systems.Monitor engine performance and recommend corrective actions.Avionics & Electrical SystemsInspect communication and navigation systems.Maintain radar, autopilot, cockpit instrumentation, and electrical wiring.Test aircraft electronic systems for operational reliability.Ensure compliance with avionics maintenance procedures.Documentation & ComplianceComplete maintenance logs, inspection reports, and defect records.Maintain aircraft technical documentation accurately.Ensure compliance with aviation regulatory authorities.Certify aircraft for return to service after maintenance (where appropriately licensed).Follow company maintenance policies and quality assurance procedures.Safety & Quality AssuranceFollow all aviation safety regulations and standard operating procedures.Maintain clean and organized work areas.Ensure proper use of Personal Protective Equipment (PPE).Report safety hazards and technical discrepancies immediately.Participate in safety audits and quality inspections.Team CoordinationWork closely with pilots, technicians, quality inspectors, and operations staff.Coordinate maintenance schedules with flight operations.Assist junior technicians with technical guidance and training.Participate in emergency aircraft recovery and AOG (Aircraft on Ground) support.Required QualificationsDiploma or Bachelor's Degree in Aircraft Maintenance Engineering, Aeronautical Engineering, Mechanical Engineering, or Aerospace Engineering.DGCA-approved AME qualification or equivalent aviation authority certification is preferred.Valid Aircraft Maintenance Engineer License (where applicable).Type rating on specific aircraft is an advantage.Relevant experience in aircraft maintenance is preferred.Required SkillsStrong knowledge of aircraft systems and maintenance procedures.Excellent troubleshooting and fault diagnosis skills.Knowledge of aviation regulations and airworthiness standards.Ability to interpret aircraft maintenance manuals and engineering drawings.Strong analytical and problem-solving abilities.Excellent attention to detail.Good communication and teamwork skills.Ability to work under pressure and meet strict deadlines.Computer proficiency in maintenance management software.Good technical documentation skills.Technical KnowledgeAircraft StructuresGas Turbine EnginesHydraulic SystemsPneumatic SystemsElectrical SystemsAvionics SystemsFlight Control SystemsLanding Gear SystemsFuel SystemsAircraft DocumentationMaintenance PlanningAircraft Safety StandardsPreferred CertificationsDGCA Aircraft Maintenance Engineer LicenseEASA Part-66 License (preferred internationally)ICAO-compliant aviation trainingHuman Factors TrainingSafety Management System (SMS) TrainingFuel Tank Safety TrainingEWIS (Electrical Wiring Interconnection System) TrainingAircraft Type Rating CertificationWorking ConditionsAirport hangars, maintenance bases, and line maintenance stations.Rotational shifts including nights, weekends, and public holidays.Outdoor work in varying weather conditions.Physically demanding work involving standing, climbing, bending, and lifting equipment.Exposure to aircraft noise, fuels, lubricants, and hydraulic fluids while following strict safety procedures.Salary Range (India)Fresher: 3.5 - 6 LPA2-5 Years: 6 - 10 LPA5-10 Years: 10 - 18 LPALicensed/Type-Rated AME: 15 - 30+ LPA (depending on airline, aircraft type, and experience)

An Aircraft Maintenance Engineer (AME) is responsible for inspecting, maintaining, repairing, troubleshooting, and certifying aircraft to ensure they are safe, airworthy, and compliant with aviation regulations. The role involves carrying out scheduled and unscheduled maintenance on aircraft systems, engines, avionics, electrical components, hydraulic systems, landing gear, and structural components while adhering to the standards established by aviation authorities.Key ResponsibilitiesAircraft Inspection & MaintenancePerform routine, preventive, scheduled, and unscheduled aircraft maintenance.Conduct daily, transit, weekly, A-check, B-check, C-check, and heavy maintenance inspections.Inspect aircraft structures, fuselage, wings, landing gear, flight controls, and engines.Diagnose and rectify aircraft defects using approved maintenance procedures.Replace, repair, and overhaul defective aircraft components.Ensure all maintenance tasks are completed according to the Aircraft Maintenance Manual (AMM).Troubleshooting & RepairsIdentify mechanical, hydraulic, electrical, pneumatic, and avionics faults.Use specialized diagnostic tools and testing equipment.Repair aircraft systems while maintaining manufacturer specifications.Coordinate with engineering teams for complex technical issues.Perform functional tests after repairs to verify serviceability.Engine & Component MaintenanceInspect aircraft engines for wear, leaks, corrosion, and damage.Perform engine servicing, oil changes, filter replacement, and component inspections.Maintain propellers, Auxiliary Power Units (APU), and fuel systems.Monitor engine performance and recommend corrective actions.Avionics & Electrical SystemsInspect communication and navigation systems.Maintain radar, autopilot, cockpit instrumentation, and electrical wiring.Test aircraft electronic systems for operational reliability.Ensure compliance with avionics maintenance procedures.Documentation & ComplianceComplete maintenance logs, inspection reports, and defect records.Maintain aircraft technical documentation accurately.Ensure compliance with aviation regulatory authorities.Certify aircraft for return to service after maintenance (where appropriately licensed).Follow company maintenance policies and quality assurance procedures.Safety & Quality AssuranceFollow all aviation safety regulations and standard operating procedures.Maintain clean and organized work areas.Ensure proper use of Personal Protective Equipment (PPE).Report safety hazards and technical discrepancies immediately.Participate in safety audits and quality inspections.Team CoordinationWork closely with pilots, technicians, quality inspectors, and operations staff.Coordinate maintenance schedules with flight operations.Assist junior technicians with technical guidance and training.Participate in emergency aircraft recovery and AOG (Aircraft on Ground) support.Required QualificationsDiploma or Bachelor's Degree in Aircraft Maintenance Engineering, Aeronautical Engineering, Mechanical Engineering, or Aerospace Engineering.DGCA-approved AME qualification or equivalent aviation authority certification is preferred.Valid Aircraft Maintenance Engineer License (where applicable).Type rating on specific aircraft is an advantage.Relevant experience in aircraft maintenance is preferred.Required SkillsStrong knowledge of aircraft systems and maintenance procedures.Excellent troubleshooting and fault diagnosis skills.Knowledge of aviation regulations and airworthiness standards.Ability to interpret aircraft maintenance manuals and engineering drawings.Strong analytical and problem-solving abilities.Excellent attention to detail.Good communication and teamwork skills.Ability to work under pressure and meet strict deadlines.Computer proficiency in maintenance management software.Good technical documentation skills.Technical KnowledgeAircraft StructuresGas Turbine EnginesHydraulic SystemsPneumatic SystemsElectrical SystemsAvionics SystemsFlight Control SystemsLanding Gear SystemsFuel SystemsAircraft DocumentationMaintenance PlanningAircraft Safety StandardsPreferred CertificationsDGCA Aircraft Maintenance Engineer LicenseEASA Part-66 License (preferred internationally)ICAO-compliant aviation trainingHuman Factors TrainingSafety Management System (SMS) TrainingFuel Tank Safety TrainingEWIS (Electrical Wiring Interconnection System) TrainingAircraft Type Rating CertificationWorking ConditionsAirport hangars, maintenance bases, and line maintenance stations.Rotational shifts including nights, weekends, and public holidays.Outdoor work in varying weather conditions.Physically demanding work involving standing, climbing, bending, and lifting equipment.Exposure to aircraft noise, fuels, lubricants, and hydraulic fluids while following strict safety procedures.Salary Range (India)Fresher: 3.5 - 6 LPA2-5 Years: 6 - 10 LPA5-10 Years: 10 - 18 LPALicensed/Type-Rated AME: 15 - 30+ LPA (depending on airline, aircraft type, and experience)

Ground Staff are responsible for handling all passenger services and operations at the airport on the ground. They ensure smooth functioning of airport activities such as check-in, boarding, baggage handling, and customer assistance. Key Responsibilities Passenger HandlingAssist passengers during check-in and boarding processVerify passenger documents (tickets, ID, visa, passport)Issue boarding passes and seat allocationHandle special service requests (wheelchair, infants, elderly passengers) Baggage HandlingWeigh and tag baggageEnsure compliance with airline baggage policiesCoordinate with cargo and baggage teamsHandle lost, delayed, or damaged baggage complaints Customer ServiceProvide information about flight schedules, delays, and gate changesResolve passenger queries and complaints professionallyEnsure a high level of customer satisfaction Boarding & DepartureAnnounce boarding calls and assist passengers at gatesCheck boarding passes and manage queuesEnsure smooth boarding and timely departure of flights Arrival DutiesAssist arriving passengersCoordinate with immigration and customs authoritiesGuide passengers for baggage collection Safety & SecurityFollow airport safety and security proceduresReport suspicious activities or unattended baggageCoordinate with security staff Required SkillsExcellent communication and interpersonal skillsCustomer service orientationProblem-solving abilityAbility to work under pressureTeamwork and coordinationBasic computer knowledge Educational QualificationMinimum: 12th Pass (Higher Secondary)Preferred: Graduate in any discipline (Aviation/Hospitality is a plus) ExperienceFreshers can applyPrior experience in aviation, hospitality, or customer service is preferred Salary (India Approx.)Fresher: 20,000 - 25,000 per monthExperienced: 25,000 - 45,000+ per month Work EnvironmentAirports (domestic & international terminals)Rotational shifts (day/night)Standing for long hours

OverviewThe Aircraft Maintenance Department is responsible for ensuring the airworthiness, safety, and operational reliability of an airlines fleet. The department performs routine maintenance, inspections, troubleshooting, and repairs on aircraft systems and components in compliance with aviation regulations and manufacturer guidelines. The team ensures that aircraft are maintained to the highest safety and operational standards, supporting on-time flight operations.Key Responsibilities Maintenance & RepairsPerform scheduled (line and base) maintenance, inspections, and preventive checks.Troubleshoot mechanical, hydraulic, pneumatic, and avionics systems.Repair or replace defective aircraft components in accordance with manufacturer manuals.Conduct engine checks, landing gear maintenance, and structural inspections.Maintain aircraft interiors, including seating, cabin systems, and emergency equipment. Documentation & ComplianceMaintain detailed records of maintenance activities, defects, and repairs.Ensure compliance with aviation regulations (DGCA, FAA, EASA, etc.) and airline SOPs.Prepare reports for regulatory audits and inspections.Ensure proper documentation of part replacements and maintenance logs. Safety & Quality AssuranceMonitor aircraft systems for potential issues and perform proactive maintenance.Ensure adherence to all safety, health, and environmental regulations.Participate in safety audits, inspections, and risk assessments.Report hazards, non-conformances, or technical issues promptly. Team CoordinationCoordinate with flight operations, ground staff, and technical control teams.Assist engineers and technicians during troubleshooting or major repairs.Support training and mentoring of junior maintenance staff. Technical & Operational SupportPerform software updates and troubleshooting for avionics and onboard systems.Test aircraft systems to verify proper functioning after maintenance.Recommend improvements in maintenance procedures and processes.Manage spare parts inventory, tools, and equipment for maintenance operations.Skills & CompetenciesTechnical Skills:Strong knowledge of aircraft systems (avionics, engines, hydraulics, pneumatics)Proficiency in maintenance software and diagnostic toolsAbility to read and interpret technical manuals, blueprints, and schematicsKnowledge of aviation safety standards and regulatory requirementsSoft Skills:Problem-solving and analytical thinkingAttention to detail and high level of accuracyTeamwork and effective communicationAbility to work under pressure and meet tight deadlinesPersonal Attributes:Commitment to safety and qualityReliability, discipline, and professionalismAdaptability to shift work and emergency maintenance situationsEducational QualificationsDiploma or Bachelors degree in Aeronautical Engineering, Mechanical Engineering, or Aircraft Maintenance Engineering (AME)Certifications in Aircraft Maintenance and Repair (DGCA-approved AME license for India, FAA/EASA certifications for international roles)ExperienceEntry Level: Freshers with relevant educational background and training may apply.Experienced: 06 years of experience in aircraft maintenance, line/base maintenance, or technical operations preferred.Work EnvironmentHangars, maintenance bays, and airport operational areasExposure to aircraft engines, hydraulics, and avionics systemsShift-based schedules, including nights, weekends, and emergency call-outsAdherence to strict safety protocols and PPE requirements

We have vacant of 42 Urgent Hiring of Aircraft Maintenance at Airports Jobs in Mumbai, Kolkata, Goa, Visakhapatnam, Trivandrum/Thiruvananthapuram, Kozhikode/Calicut, Chennai, Kannur, Mangalore, Surat, for Freshers Educational Qualification : I.T.I., B.C.A, B.B.A, B.E, B.Tech, Other Bachelor Degree, Post Graduate Diploma, M.Tech, Integrated PG, Any Master Degree Skill Aircraft Maintenance, Aeronautical Engineer, Aviation, Aircraft Engineer, Aircraft Maintenance Engineer, Aircraft Technician, Electrical Engineer, Mechanical Engineer, Civil Engineer, Site Engineer, Project Engineer, Avionics etc.

We are looking for an Aircraft Maintenance Engineer in Chennai. This role is essential in ensuring the safety and reliability of aircraft by performing maintenance, repairs, and inspections. The ideal candidate will have a passion for aviation and a keen eye for detail.Key Responsibilities:- Perform Routine Maintenance: Conduct regular checks on aircraft systems and components to ensure they are functioning correctly and safely.- Inspect Aircraft: Carry out detailed inspections before and after flights to identify any potential issues or wear and tear.- Repair and Replace Parts: Fix or replace any faulty parts, ensuring that all repairs meet industry standards and regulations.- Document Work: Keep accurate records of all maintenance performed, including any repairs and inspections, to ensure compliance with aviation regulations.- Collaborate with Team: Work closely with other engineers and technicians to ensure smooth operations and share knowledge on maintenance practices.Required Skills and Expectations:- A minimum of a 12th-grade education is required; prior experience in aircraft maintenance is a plus.- Strong problem-solving skills to identify and resolve issues effectively.- Attention to detail is crucial for safeguarding aircraft safety and operational efficiency.- Effective communication skills are necessary to work collaboratively with team members and report findings clearly.- Must be willing to work in an office environment and be flexible with working hours to meet operational needs.

An Aircraft Maintenance Engineer is responsible for inspecting, maintaining, repairing, and ensuring the airworthiness of aircraft systems and components. They ensure that aircraft meet safety regulations and are safe for flight operations by following aviation authority standards.Key ResponsibilitiesInspect aircraft systems, engines, and components before and after flights.Perform routine maintenance, repairs, and overhauls on aircraft.Diagnose mechanical and electrical faults in aircraft systems.Replace or repair defective aircraft parts and components.Ensure compliance with aviation safety standards and regulations.Maintain detailed maintenance records and technical documentation.Conduct troubleshooting on aircraft systems such as engines, landing gear, hydraulics, and avionics.Coordinate with pilots and ground crew regarding aircraft condition and maintenance issues.Test aircraft systems to ensure proper functioning after maintenance.Ensure all work is completed according to aviation authority guidelines.Required SkillsStrong knowledge of aircraft systems and engineering principlesMechanical and technical troubleshooting skillsAttention to detail and safety awarenessProblem-solving abilityAbility to work under pressure and in shiftsGood communication and teamwork skillsEducational QualificationDiploma or Degree in Aircraft Maintenance Engineering (AME) or Aeronautical Engineering.Certification or license from aviation authority (such as DGCA in India).ExperienceFreshers can work as Technicians or Trainees.Experienced engineers may work as Licensed Aircraft Maintenance Engineers.Work EnvironmentAirports and aircraft hangarsAviation maintenance organizationsAirlines and aircraft manufacturing companies

Job Summary:An Aircraft Maintenance Engineer (AME) is responsible for inspecting, maintaining, repairing, and ensuring the airworthiness of aircraft and its components. They ensure that aircraft meet safety standards and aviation regulations before flight operations. AMEs play a critical role in passenger safety and aircraft performance.Key Responsibilities1. Aircraft InspectionPerform routine and scheduled inspections of aircraft systems and components.Examine engines, landing gear, hydraulic systems, avionics, and airframes.Identify mechanical or technical faults and safety issues.2. Maintenance & RepairsCarry out preventive and corrective maintenance on aircraft.Repair or replace damaged aircraft parts and systems.Troubleshoot mechanical, electrical, and avionics problems.3. Testing & TroubleshootingConduct operational and functional tests after maintenance.Diagnose system failures using specialized tools and equipment.Ensure proper functioning of aircraft engines and instruments.4. Documentation & ReportingMaintain accurate maintenance records and technical logs.Prepare inspection and repair reports.Ensure compliance with aviation authority regulations.5. Safety ComplianceFollow aviation safety standards and maintenance procedures.Ensure aircraft meets regulatory requirements before release.Adhere to workplace safety and quality standards.6. CoordinationWork closely with pilots, ground staff, and technical teams.Coordinate with airline operations and engineering departments.Communicate maintenance updates and technical findings.Required SkillsStrong technical and mechanical knowledge.Problem-solving and troubleshooting ability.Attention to detail and accuracy.Knowledge of aircraft systems and aviation regulations.Ability to work under pressure and tight schedules.Good communication and teamwork skills.Educational QualificationDiploma or Degree in Aircraft Maintenance Engineering (AME) or Aeronautical Engineering.Certification approved by aviation authorities (such as DGCA or relevant authority).Training from a recognized aviation institute.Experience RequirementsFresher AMEs may work as trainees or junior technicians.Experience in aircraft maintenance or airline engineering department preferred.Hands-on training or apprenticeship experience is an advantage.Work EnvironmentAirports, hangars, and maintenance workshops.Shift duties including nights, weekends, and holidays.Work may involve noise, heights, and outdoor conditions.