Automobile Engineer Job Vacancies in Chennai

- Install and service CCTV, Video Door Phones (VDP), Access Control, Intruder Alarm, Networking, and Smart Home Automation systems.- Perform cable laying, device mounting, termination, testing, and commissioning.- Attend service calls and troubleshoot system issues.- Coordinate with engineers and project managers during project execution.- Maintain site documentation and installation quality standards.- Follow safety procedures and complete assigned work on time.Requirements:- ITI / Diploma or relevant technical qualification.- 1-3 years of experience in CCTV, networking, electrical, or security systems.- Basic knowledge of IP cameras, networking, and electr...

The Diagnostic Support Engineer will be responsible for monitoring DTC (Diagnostic Trouble Codes) and CAN (Controller Area Network) parameters at the Command Centre (CC) 24/7. The role involves guiding customers and drivers, managing escalations, and coordinating with dealers to resolve vehicle issues efficiently.Location: Oragadam, Tamil NaduExperience: 3-6 yearsIndustry: AutomotiveWorking Days : 6 days (Rotational week off & National Holidays)Key Responsibilities: 24/7 Monitoring: Monitor DTC/CAN parameters at the Command Centre and raise tickets immediately when an issue is detected. Ticketing: Respond to triggered DTC/CAN alerts by creating internal tickets in the DMS system (with automation in phase 2). Customer Assistance: Provide Level 1 (L1) support over the phone, guiding customers/drivers to resolve minor issues. Critical DTCs: For vehicles with critical DTCs (e.g., Service Now category), guide them to the nearest dealer. Vehicle Breakdown: If a vehicle is immovable, or if further damage could occur, instruct the dealer to reach the vehicles location. Issue Tracking: Coordinate with dealers to ensure the issue/ticket is resolved completely and in a timely manner. Management Reporting: Provide daily, weekly, monthly, and ad-hoc reports on vehicle issues and resolution status. KPI Tracking: Track and report KPI targets in the required format. Job Card Analysis: Conduct job card analysis, focusing on cost avoidance, analytics, and reporting for continuous improvement.Qualifications: Experience in customer support, vehicle service, or command centre operations. Strong problem-solving and communication skills for guiding customers and coordinating with dealers. Familiarity with DMS systems, ticketing tools, and vehicle diagnostics (DTC/CAN). Ability to work in a 24/7 environment and handle critical issues efficiently. Strong analytical skills for reporting and KPI tracking.

As a CNC Operator, you will be responsible for operating and overseeing CNC machinery to create precision parts and products. This is a full-time position based in Tiruvallur.Key Responsibilities:- Set Up CNC Machines: Prepare machines for production by installing and aligning tools, fixtures, and workpieces according to specifications.- Read Technical Drawings: Examine blueprints and technical drawings to understand project specifications and ensure accurate production.- Monitor Machine Operations: Keep an eye on the performance of CNC machines during operation, making adjustments as needed to maintain quality.- Conduct Quality Checks: Use measuring tools to inspect finished products and ensure they meet required specifications and tolerances.- Maintain Equipment: Regularly clean and perform basic maintenance on machines to ensure they operate efficiently and safely.- Collaborate with Team: Communicate effectively with team members and supervisors to report issues, suggest improvements, and stay informed on project updates.Required Skills and Expectations:- A diploma in mechanical engineering or a related field is required, providing foundational knowledge for the role.- Familiarity with CNC machinery and tools is essential. Prior experience is a plus but not mandatory, as training will be provided.- Good attention to detail and precision to produce high-quality parts is crucial.- Basic problem-solving skills to troubleshoot minor machine issues are important.- Ability to work effectively in a team environment and communicate clearly with colleagues. Candidates should be eager to learn and adapt in a fast-paced manufacturing setting.

Understand the component drawing and get the work done by the operator

Role: GET - Graduate engineering Trainee (Permanent roll)Graduation: Mech / EEE / ECE / ITI / Diploma / Automobile / ProductionRole & Responsibilities:1) Looking for the person who can work in any timings.2) To be accountable and who is looking for Good learning in metrology.ready to travel to Supplier Audits Immediate Joiners Preferred3) Should be willing to relocate and travel , ready to work in extended working hours.Location: SHOP NO 3, 5/80, Mugappair Rd, Mannurpet, Padi, Chennai, Tamil Nadu 600050Contact: 7358336711 - 96007 43991(kindly call or share the resumes in the given number)

Be Btech Mechanical Automobile Engineer 2024Job DescriptionHiring Mechanical & Automobile Freshers in ChennaiDepartment:Production, Quality, Maintenance, DesigningBenefits: Food / Transport / AccommodationBoth Male & Female are eligibleSalary: Free Food / Transport / Accommodation, OTArrear Students can also applyIndustry:Automobile / Auto Anciliary / Auto ComponentsFunctional Area:Production , Manufacturing , MaintenanceRole Category:OtherRole:FresherEmployment Type: Permanent Job, Full TimeDesired Candidate ProfilePlease refer to the Job description above:Education-UG: B.Tech/B.E. Automobile, MechanicalRegards,Riya -HR

Designation : Graduate Engineer TraineeNature of Job : Automotive parts quality inspection, Visual Inspection, Quality control, DocumentationExperience required : 0 to 1 yearsWork location : Chennai [Perungudi]Only male candidates eligibleInterested visit our office with original certificatesAddress :Swagatham Resource Management India Private LimitedNo: 14 Sarathy Nagar 1st main road, Velachery, Chennai - 600 042Time : 9 am to 5 pm [ All working days ]

IMMEDIATE HIRING FOR AUTOMOBILE ENGINEERING!!!Job summary:Qualification: B.E/B.TECH/DIPLOMA (MECH/AUTOMOBILE/EEE/ECE)Years of Passing: 2018-2022Salary: 18000 to 25000Experience: 3 years Role: EngineeringShift: Full TimeJob type: on role / permanent Location: Chennai Responsibility:1. Automotive engineers work as part of a team responsible for vehicle design, development, manufacture and testing. 2. Automotive engineers are involved in the design, manufacture, distribution, marketing, sales and after-sales care of cars (including racing cars), motorbikes and other commercial vehicles.Walk in date of time:9/11/2022 to 30/11/202210.00 am to 4:30 pm (Sunday holiday)Benefits:1. Food and transport 2. ESI +PF 3. Bonus +incrementVenue:No 24, f1, first floor Bajanai Koil 2nd street Vadapalani Chennai -26Near SIMS Hospital BacksideDocumentation:1. Resume 2. Passport size photoRegards,Nishanthi HR

MEGA OPENING FOR AUTOMOBILE ENGINEERINGJob summary:Qualification: B.E/B.TECH/DIPLOMA (MECH/AUTOMOBILE/EE/ECE)Years of Passing: 2018-2022Salary: 18000 to 25000Experience: 0-3 years Role: EngineeringShift: Full Time Job type: on role / permanent Location: Chennai Benefits:1. Food and transport 2. ESI +PF Responsibility:1. Automotive engineers work as part of a team responsible for vehicle design, development, manufacture and testing. 2. Automotive engineers are involved in the design, manufacture, distribution, marketing, sales and after-sales care of cars (including racing cars), motorbikes and other commercial vehicles.Walk in date of time:31/01/2023 to 13/02/202310.00 am to 4:30 pm (Sunday holiday)Venue:No 24, f1, first floor Bajanai Koil 2nd street Vadapalani Chennai -26Near SIMS Hospital BacksideRegards,Vignesh HR

Generating various MIS reports. Follow-up End-to End process of Procurement and Supply Chain Capable of getting timely ERP module updates Responsible for the procurement of Aviation spare parts from various OEMs/ suppliers /sites. POL sourcing Source and purchase machinery, equipment, tools, raw material, packaging materials, parts, services, and/or supplies necessary for the Aviation Industry. Compile and analyse statistical data to help determine prospects of buying products and to help establish price objectives. Consult with suppliers and learn to analyse suppliers operations and determine lowest cost consistent with quality, reliability, and ability to meet required deadlines. Evaluate quotations, negotiate prices, recommend suppliers, follow up orders placed, verify deliveries, approve payments, and maintain necessary documentation. Develop and maintain good business relations with internal and external customer base. Requirement: Bachelors or Masters. Preference to Mechanical EngineeringFreshers and Preferred Experience in Procurement from the mechanical /automobile/ aviation /Industry /can apply Proficient computer skills, including Microsoft Office Suite/ ERP module functions. Ability to multitask, prioritize, and manage time efficiently Accurate and precise attention to detail Organized and able to effectively evaluate and prioritize workload Individual and Team performer. Ability to analyze problems and strategize for better solutions

Demonstrates vehicle features and takes customers on test drives. Demonstrates automobiles by explaining warranties and services. Closes sales by overcoming objections, asking for sales, negotiating prices, and completing sales and purchasing contracts. Provides sales management information by completing report

DESCRIPTIONJob Description: Engineer/Senior Engineer - Service:-Job Briefing and Descriptions Mechanical/Electrical Engineer must have minimum of 3-5 years Service experience in Climatic Chambers or Commercial refrigeration. Diagnostics and service repairs for Environmental Chambers, Altitude Chambers, Walk-In Chambers including cascade systems. Provide planned maintenance AMC services for contract customers. Upkeep the equipment as per the AMC guidelines. Assist with the Installation and start-up of new equipment. Temperature & Humidity calibration process. (NABL Accredited) Preparation of Repair/AMC quotation and tender.Job Requirement:- Knowledge of PLC programming Controllers, Compressors, Valves and Refrigerants. Basic knowledge of Electrical, Pneumatics, Safety & Power tools experience. Applicant must be self-motivated. Work with limited supervision. Interest in moderate travel. Candidates must have Written & Oral communication skills. Computer proficiency (MS Office) and Communication SW tools.Preferable & DesiredCandidates with refrigeration experience from good companies can be considered

Urgently need be mechanical engineer, electrical engineer, electronic engineer , computer science 2018 to 2022.Hyundai group of companies need candidates.Department -production,quality ,assembly ,maintenance, store.Hyundai car parts manufacturing company.Interview date Monday to Friday 10am to 2pmSalary 21000Rs 8hrs+OT available two shift. female general shift.Food and transport free two shifts available.Location IrungattukottaiNeed design engineer, safety officers, MEP project engineer...Urgently need be/diploma/arts fresher male/female candidates... arrears candidate also apply.Job placement with in one day process direct company staff...

Inspect products based on engineering drawing to ensure that they meet quality standards. Support production process (Injection moulding, product finishing) in case of requirement Write dimension report, reports to document deficiencies and errors of products Strong understanding & essentially focused on automobile/automotive injection moulding products made of Nylon 66

Eligibility Criteria- Dip / B.E/B.TechDiscipline-Mechanical/Electrical/Electronics/AutomobileYear of passed out Required-17/18/19/20/21/22Salary Packages: Based On ExperienceLocation-ChennaiPosition-GET/Neem Trainee/Company Trainee/Senior Engineer/ProductionEngineer/Junior Engineer/CNC OperatorVacancies Available Departments- Production/Quality/Electrical Maintenance& Mechanical Maintenance/CNC(Programming)(Operating)Roles & Responsibilities : Analyze potential problem and suggest corrective actions. Manage repair and maintenance requests promptly. Provide assistance to other Engineers when needed. Develop preventive maintenance programs and support in energyconservation improvements. Ensure that engineering equipment and tools are properly cleaned, storedand maintained in good conditions. Handle engineering equipment safely and effectively to avoid accidents.Perks: Food Will Be Provided Accommodation will be provided Transport Will be AvailableCandidates willing to work with shift basis Can Apply for the jobFemale candidates will be put into general shift onlyEligible Engineering Graduates Kindly come and attend the interview at below mentioned venue and Candidates kindly bring the following Current updated Resume(Must) Recent Passport Size Photo Hard Copy of this Mail(Must)Interview Process-Walk-in InterviewInterview Timing: 10 am to 4 pm (Monday to Friday)Interview Venue:No. 24, F1, First Floor,Bajanai Koil 2nd street,Vadapalani,Chennai-600026Landmark: SIMS Hospital BacksideRegards,HR TEAM

Position : Trainee Qualification : BE/B.Tech Mechanical or Automobile 15 each in Chennai & Bangalore Diploma/ITI Mechanical or Automobile 15 each in Chennai & Bangalore Total No. of positions : 60 Venue for Training : TVS Knowledge Centre V.R.P Chatiram, Sriperambatur Chennai 602105 Duration of Training : 2 to 3 weeks Travel ticket will be reimbursed and accommodation will be provided during training @ Chennai Posting Post Training : Within Chennai/Coimbatore/Madurai/Trichy for Chennai candidates and Within Bangalore for Bangalore candidates Stipend : Rs 15,000 gross salary per month for BE Rs 13,000 gross salary per month for Diploma Venue for the Interview Process : Bangalore ki Mobility solutions Pvt Ltd, 9/4, Mysore Road, ITI Layout, 3rd Phase, 3,Nayanda Halli, Bengaluru,

Evaluates manufacturing processes by designing and conducting research programs.Develops manufacturing processes by studying product requirements, researching testing methods, and conferring with equipment vendors.Improves manufacturing efficiency by analyzing and planning workflow, space requirements, and equipment layout.Assures product and process quality by designing testing methods.Provides manufacturing decision-making information by calculating production, labor, and material costs.Prepares product and process reports by collecting, analyzing, and summarizing information and trends.Provides manufacturing engineering information by answering questions and requests.Maintains product and company reputation by complying with government regulations.Keeps equipment operational by coordinating maintenance and repair services.Maintains product and process database by writing computer programs and entering data.Completes design and development projects by training and guiding technicians.Maintains professional and technical knowledge by attending educational workshops.RoleProduction : EngineerIndustry: TypeAutomobileFunctional AreaProduction: Manufacturing & EngineeringEmployment TypeFull Time,: PermanentRole Category:Engineering

Job DescriptionCandidates for all India processjob opening in automobile CompanyQualification-10th,12th,Diploma,I.T.I,Graduation and Post Graduation(all stream)Post: - Helper Rs.15,400 - Rs.19,200Store Keeper Rs.20,500 - Rs.23,500Store incharge Rs.24,800 -Rs 26,800Supervisor Rs.27,500- Rs.29,800computer operator Rs.28,500-30,400Mechanical and technical field, Rs.26,500 - Rs.31,500Sales and Marketing Rs.22,500-30,500Working Hours ;- 8 hours, 1st undefined 2nd shiftOther Benefits Fooding + Lodging + E.S.I Medical + Uniform facility available + Bonus + week Off.Interested candidates call to our HR managerBelow given Number or Whatsapp Share Your Resume,Employement Category given above:Employement Type: Full timeIndustry: Full timeFunctional Area: AutomotiveRoleRole/Responsibilies: Tata Motors Pvt Ltd (automobile)Contact Details:

Dear Candidates We are requiting BE/B.tech & Diploma Holder in our client company Oragadam location..The Most top MNC & four wheeler, two wheeler Manufacturing Industries Hiring . The Nature of job is Production , Quality ,Maintenance, Store, Purchase Role: Prodution,Maintenance,Quality,Purchase,ManufacturingQualification:Any Degree 2018 = 2021Salary:12k to 16kJob Location: ChennaiWork Location : Tambaram,IrukattukotaiJob Type: Full-timeFacility: Food and Transport FacilityInterview Process is going on this week onlyCompany ID card and direct joining and Appointment letter after,Immediately joining, No RejectionIf you are interested please feel free to contact usContact Further Details :HRMegalaVenue Details:No:12/23,Antony Street,East Tambaram,Chennai-59.L.m: Opp to Christ King Girls School.

Designation : Graduate Engineer TraineeNature of Job : Automotive parts quality inspection, Line & Final quality, Quality assurance,Quality control, DocumentationExperience required : 0 to 1 yearsSalary : 18000 to 22000Work location : Chennai [ Ambattur Industrial Estate]Both male and female candidates eligibleInterested visit our office with original certificatesAddress :Swagatham Resource Management India Private LimitedNo: 14 Sarathy Nagar 1st main road, Velachery, Chennai - 600 042Time : 9 am to 5 pm [ All working days ]

Designation : Graduate Engineer TraineeNature of Job : Automotive parts quality inspection, Line & Final quality, Quality assurance, Quality control, Documentation Experience required : 0 to 2 yearsSalary : 18000 to 22000Work location : Chennai [ Ambattur Industrial Estate] Only male candidatesInterested visit our office with original certificates and luggage Address :Swagatham Resource Management India Private LimitedNo: 14 Sarathy Nagar 1st main road, Velachery, Chennai - 600 042 Time : 9 am to 5 pm [ All working days ]

Designation : Graduate Engineer TraineeNature of Job : Automotive parts quality inspection, Line & Final quality, Quality assurance, Quality control, Documentation Experience required : 0 to 2 yearsSalary : 18000 to 22000Work location : Chennai [ Ambattur Industrial Estate] Only male candidatesInterested visit our office with original certificates and luggage Address:Swagatham Resource Management India Private LimitedNo: 14 Sarathy Nagar 1st main road, Velachery, Chennai - 600 042 Time : 9 am to 5 pm [ All working days ]

Mechanical Engineer(Automobile industry) 2024HI !!Dear friends!!We are hiring freshers!!QualificationsBachelor's degree in Mechanical Engineering or a related fieldMinimum 5 to 8 yrs of Experience in the operation and maintenance of mechanical equipmentExperience in the cement industry is preferredExperience in supervising and coordinating a team is preferredGood knowledge of safety procedures and regulationsExcellent communication and problem-solving skillsAbility to work independently and as part of a team under pressure and meet tight deadlinesDemonstrate technical knowledge of mechanical engineering concepts and proficiency in tools used in the field.Be able to evaluate field conditions and perform technical analysis to help troubleshoot problems and recommend solutionsDept:Production , Quality , Assembly ,Maintenance ,DesignNo. of Vacancy: 200Designation: GET -Permeant jobLocation: sriperumbudur ,Ambattur, M.M. nagar, oragadamEdu: Be,DipExp :0 to 1Salary: 15k to 18kRegards,Riya -HR