TIG Welding Jobs in India

Here is a detailed and highly functional job description for an Industrial Welder. This profile is tailored for engineering, sheet metal, and structural fabrication environments, where precision, blueprint reading, and safety are paramount.Job Description: Industrial Welder / FabricatorDepartment: Production / Fabrication Shop / MaintenanceReports To: Welding Supervisor / Production EngineerExperience Level: 2-5 years (ITI / Welder Certification preferred)Job PurposeThe Welder is responsible for joining metal components, plates, tubes, and structures using various industrial welding techniques based on blueprint specifications. This role requires a high level of manual dexterity, an understanding of metallurgy, and strict adherence to dimensional tolerances to ensure strong, defect-free welded joints that meet rigorous quality standards.Key Responsibilities1. Welding Operations & TechniquesMulti-Process Welding: Set up and operate welding equipment to perform high-quality MIG (Metal Inert Gas), TIG (Tungsten Inert Gas), and SMAW (Shielded Metal Arc/Stick) welding based on the material thickness and job specifications.Machine Calibration: Adjust welding machine parameters, including current (amperage), voltage, gas flow rate, and wire feed speed, to match the specific metal type (Mild Steel, Stainless Steel, or Aluminum).Positional Welding: Execute clean and structurally sound welds in various positions, including flat, vertical, horizontal, and overhead positions.2. Fit-Up & Fabrication SupportBlueprint Analysis: Read and interpret mechanical engineering drawings, welding symbols, layouts, and process sheets to determine the required weld dimensions and sequences.Pre-Weld Preparation: Clean, grind, bevel, and clamp metal pieces together to ensure a perfect fit-up. Use measuring tools like vernier calipers, pitch gauges, and squares to verify alignment before striking an arc.Tack Welding: Apply precise tack welds to temporarily secure structures in place before executing the final continuous weld bead, preventing thermal warping or distortion.3. Quality Assurance & Defect PreventionVisual Inspection: Conduct immediate post-weld visual inspections to check for common welding defects such as porosity, undercut, slag inclusion, cracks, or lack of penetration.Post-Weld Finishing: Use chipping hammers, wire brushes, and angle grinders to clean slag, remove spatter, and smooth out weld seams for a neat finish.4. Safety & Shop Floor DisciplinePPE Enforcements: Operate with absolute compliance regarding welding safety gear, including auto-darkening welding helmets, leather aprons, welding jackets, and heavy-duty heat-resistant gloves.Fume & Fire Safety: Ensure the welding booth extraction systems are active and maintain a clear, hazard-free zone around flammable gas cylinders (Argon, $CO_2$, Acetylene).

As a TIG & Arc Welder, you will play a vital role in the fabrication and production process by using specialized welding techniques to join metal parts. This position is based in Kollam and requires individuals with 4 to 5 years of relevant experience.**Key Responsibilities:**- **Perform TIG and Arc Welding:** Execute welding techniques to fuse metal components, ensuring precise and high-quality welds according to project specifications.- **Read and Interpret Blueprints:** Understand engineering drawings and specifications to determine the welding requirements and methods needed for each task.- **Inspect Welds for Quality:** Conduct inspections of completed welds to ensure they meet safety and quality standards, addressing any issues promptly.- **Maintain Equipment:** Regularly check and maintain welding equipment to ensure optimal performance, including cleaning and troubleshooting minor issues.- **Ensure Safety Compliance:** Follow all safety protocols and guidelines to maintain a safe work environment for yourself and your colleagues.**Required Skills and Expectations:**- Candidates must have a minimum of 4 to 5 years of experience in TIG and Arc welding.- A 12th-grade education is required; additional vocational training in welding techniques is a plus.- Strong hand-eye coordination and attention to detail are essential for producing high-quality welds.- Ability to read blueprints and technical drawings accurately.- Good communication skills to effectively collaborate with team members and supervisors.- Must be physically fit, as the job may require lifting and standing for extended periods.

Job profile- Mig welderSalary- 18kExperience- 1-2 yearsJob location- Sikri, Ballabhgarh,( faridabad) JOB TYPE Full-Time / Permanent Perform MIG welding in strict accordance with provided technical drawings. Hold and secure MS (Mild Steel) fabrication components safely with a proper, clean finishing. Consistently maintain exceptional welding quality, accuracy, and structural integrity.Coordinate closely with the core fabrication team throughout all stages of production. Operate welding machines, heavy tools, and equipment safely and efficiently. Strictly follow all established safety protocols, workplace hazards guidelines, and quality standards

As a MIG Welder, you will play a crucial role in the production process by efficiently welding metal components together. This position is for individuals looking to start their career in welding, with a focus on MIG welding techniques.**Key Responsibilities:**- **Perform Welding Tasks:** Use MIG (Metal Inert Gas) welding techniques to join metal parts together, ensuring strong and precise welds.- **Read and Interpret Blueprints:** Understand and follow technical drawings and specifications to ensure accurate work according to project requirements.- **Maintain Equipment:** Regularly check and maintain welding equipment and tools to ensure they are in good working condition, minimizing downtime.- **Inspect Welds:** Conduct quality checks on completed welds to confirm they meet safety and quality standards, making necessary adjustments as needed.- **Follow Safety Protocols:** Adhere to all workplace safety rules and regulations to ensure a safe working environment for yourself and your coworkers.**Required Skills and Expectations:**- **Basic Welding Knowledge:** Familiarity with MIG welding processes is advantageous, but training will be provided for beginners.- **Attention to Detail:** Ability to focus on the fine details of each weld, ensuring they meet the specifications outlined in project plans.- **Physical Stamina:** Capable of performing manual tasks and standing for long periods in a typical workshop setting.- **Team Player:** Willingness to work collaboratively with colleagues to complete projects efficiently and effectively.- **Positive Attitude:** A strong desire to learn and develop skills in welding and related trades, contributing positively to the work environment.

We are looking for a skilled TIG & Arc Welder to join our team in Coimbatore. The ideal candidate will have 1 to 3 years of experience and must be able to work effectively in a team environment. **Key Responsibilities:**- **TIG Welding:** Perform tungsten inert gas (TIG) welding to join metal parts, ensuring high-quality and precise results for various projects.- **Arc Welding:** Use arc welding techniques to fabricate and assemble metal components, focusing on safety and efficiency.- **Blueprint Reading:** Read and interpret technical drawings and specifications to understand project requirements and weld positions.- **Quality Control:** Inspect and test welded joints to ensure they meet the required standards and specifications, making corrections as needed.- **Maintenance:** Maintain welding equipment and tools, ensuring they are clean, functional, and safe to use.- **Collaboration:** Work closely with other team members to coordinate tasks and complete projects on time, ensuring effective communication throughout.**Required Skills and Expectations:**- **Technical Skills:** Proficiency in TIG and arc welding techniques, with a strong understanding of welding safety practices.- **Attention to Detail:** Ability to focus on quality and precision, ensuring that all welds are clean and strong.- **Problem-Solving:** Capable of identifying issues during the welding process and providing effective solutions to ensure high standards.- **Team Player:** Willing to collaborate with others and share knowledge, contributing positively to the team environment.- **Physical Stamina:** Must be physically fit to handle the demands of the job, including standing for extended periods and lifting heavy materials. Candidates must be male and have completed at least 10th standard education.

We are looking for a skilled Fabrication Fitter to join our team in Konanakunte. The ideal candidate will play a crucial role in constructing and assembling metal structures and components.**Key Responsibilities:**- **Reading Technical Drawings:** Interpret and understand blueprints and technical specifications to ensure accurate fabrication of metal parts.- **Assembly:** Assemble metal components by welding, bolting, or fastening, ensuring solid and precise connections for durability.- **Cutting and Shaping Materials:** Use tools such as band saws, grinders, and shears to cut and shape metal to required dimensions.- **Maintenance of Tools:** Regularly inspect and maintain tools and equipment to ensure safety and efficiency during fabrication processes.- **Quality Control:** Conduct inspections of finished products to ensure they meet safety standards and specifications, making adjustments as necessary.- **Collaboration:** Work closely with other team members and departments to effectively execute projects and resolve any issues that may arise during production.**Required Skills and Expectations:**Candidates should possess a minimum of 2 to 5 years of relevant experience as a Fabrication Fitter, with a strong understanding of metal fabrication processes. A basic education level of 10th grade is required. Attention to detail, good manual dexterity, and the ability to work in a team are essential. Candidates must have a solid understanding of safety practices and the ability to follow instructions. Effective communication skills will help in coordinating tasks and solving problems. This position is full-time and requires working from the office. Male candidates are preferred for this role.

We are looking for a skilled Welder in Cuttack who will be responsible for joining metal components using various welding techniques. The ideal candidate should have a hands-on approach, with experience in reading blueprints and plans to meet project specifications.**Key Responsibilities:**- **Welding Operations**: Perform welding tasks using techniques such as MIG, TIG, and arc welding to fabricate or repair metal structures and components, ensuring solid junctions.- **Blueprint Interpretation**: Read and understand technical drawings and specifications to determine the appropriate welding methods and materials required for each project.- **Quality Control**: Inspect completed welds for structural integrity and compliance with safety standards, correcting any defects to ensure high-quality workmanship.- **Maintenance of Equipment**: Regularly check and maintain welding tools and equipment to ensure they are in good working condition, minimizing downtime and enhancing safety.- **Collaboration**: Work closely with other team members and supervisors to meet project deadlines and goals, contributing to a positive and productive work environment.**Required Skills and Expectations:**- A minimum of 1-5 years of welding experience is preferred to ensure skill proficiency.- Candidates must have completed at least the 10th grade to be considered for this role.- Strong understanding of welding techniques and metal properties is essential.- Attention to detail and the ability to produce high-quality welds are critical.- Must be able to work in a fast-paced environment and meet strict deadlines.- A professional attitude and good communication skills are important for collaboration with team members.

We are seeking a skilled Welder to join our team in Rajkot. The ideal candidate will have experience ranging from 1 to 5 years and will be responsible for creating metal structures and components using various welding techniques. **Key Responsibilities:**- **Weld Metal Components:** Use different welding methods, such as MIG, TIG, and arc welding, to join metal parts together securely.- **Read Technical Drawings:** Interpret blueprints and technical drawings to understand the specifications and dimensions of the parts to be welded.- **Inspect Welds:** Examine completed welds to ensure they meet quality standards and specifications before moving to the next phase of production.- **Maintain Equipment:** Regularly check and maintain welding equipment to ensure it functions properly and safely.- **Follow Safety Protocols:** Adhere to all safety guidelines and practices while working to prevent accidents and injuries in the workplace.**Required Skills and Expectations:**Candidates should have a minimum of a 10th-grade education. Proficiency in various welding techniques and methods is crucial. Strong attention to detail is necessary to produce high-quality work. Candidates must be reliable, punctual, and able to work well in a team environment. Good communication skills are important for coordinating with supervisors and coworkers. A commitment to following safety procedures and maintaining a clean workspace is expected from all team members. This position is full-time and based in an office setting in Rajkot.

Designation:- Fabrication FitterQualification:- ITIExperience:- Fresher To 3 Years Salary:- As Per InterviewJob Time:- 08:30 Am To 07:00 Pm Job Location:- Umbergaon, Gujarat Industry:- Reputed Manufacturing Industry

As a Welder, you will be responsible for joining metal parts using various welding techniques. You will work in a team environment and ensure that all welding tasks meet high-quality standards. **Key Responsibilities:**- **Welding Tasks:** Perform welding operations on metal components, ensuring accurate and strong joins.- **Reading Blueprints:** Interpret engineering drawings and blueprints to understand the specifications of the welding project.- **Equipment Maintenance:** Regularly maintain and check welding tools and equipment for functionality and safety.- **Quality Control:** Inspect finished products to ensure they meet the required standards and specifications.- **Collaborating with Team:** Work closely with other welders and team members to complete projects efficiently and effectively.- **Safety Compliance:** Follow safety protocols while working to maintain a safe workplace and prevent accidents.**Required Skills and Expectations:**Candidates should have a basic education, with a minimum of passing 10th grade. No prior welding experience is necessary, but candidates with 0-5 years of experience in welding are preferred. You should have good manual dexterity and attention to detail to produce high-quality work. A solid understanding of safety practices in welding is crucial. Candidates should be able to work well in a team and communicate effectively. Being physically fit is also important, as the role may involve handling heavy equipment and materials.

if your interested pls email your cv to anjana.a@persolapac.com or Whatsapp only to 94874 48062Key Responsibilities Production / Fabrication Management as per project priorities. Stainless Steel Fabrication & TIG Welding Experience. Knowledge of Pressure Vessels. Projects Planning for Fabrication Work, Scheduling & Supervising at Shop Floor. Follow up with PPC Team to get the required BOM on time & reporting. Develop the production / Fabrication process, manufacturing operations. Ability to interpret technical drawings and specifications. Strong problem-solving and decision-making abilities. Good in MS Office & ERP Welding & NDT Qualifications Kannada Language Mandatory. Two-Wheeler Mandatory Work Location Rotary System(HHV)

As a Fabrication Fitter, you will play a vital role in assembling metal structures and components. You will work in a team to ensure quality fabrication and assembly of products according to specifications.**Key Responsibilities:**- **Reading Blueprints**: Understand and interpret technical drawings to ensure accurate fabrication. You will need to follow specific guidelines to create components that meet design requirements.- **Cutting and Shaping Materials**: Use hand tools and power tools to cut and shape metal pieces. This involves precise measurements to ensure proper fitting of components during assembly.- **Welding and Joining**: Perform welding and joining of metal parts using various techniques. This requires skill and attention to detail to ensure the integrity of the assembled structure.- **Quality Control**: Inspect finished products for quality and precision. You will check measurements and look for defects to ensure all products meet safety and quality standards.- **Maintaining Equipment**: Keep tools and equipment in good working condition. Regular cleaning and maintenance are essential to ensure efficient operations.**Required Skills and Expectations:**- A minimum of 1 to 3 years of experience in fabrication or a related field is required.- Candidates must have completed at least the 10th grade.- Good knowledge of welding techniques and tools is essential.- Ability to work effectively in a team and communicate clearly is important.- You should possess strong attention to detail to ensure quality workmanship.- Candidates must be physically able to perform demanding tasks, including lifting heavy materials.

We are seeking a Mechanical Fitter to join our team in Coimbatore. This full-time role is ideal for candidates with 0 to 3 years of experience and an I.T.I. qualification. **Key Responsibilities:**- **Assembly and Installation:** Assemble and install machinery and equipment according to technical drawings and specifications to ensure proper functioning.- **Maintenance and Repair:** Perform preventive maintenance and repairs on mechanical systems to extend their lifespan and ensure reliability.- **Quality Control:** Check and test systems and components to ensure they meet quality standards and specifications, ensuring high performance.- **Troubleshooting:** Diagnose mechanical faults and issues and develop solutions to restore equipment functionality effectively.- **Documentation:** Maintain accurate records of maintenance activities, repairs, and parts used to support future maintenance efforts.**Required Skills and Expectations:**- **Technical Knowledge:** A good understanding of mechanical systems, tools, and machinery is essential to perform tasks efficiently. - **Problem-Solving Skills:** Ability to identify issues quickly and implement effective solutions is crucial for this role.- **Attention to Detail:** Precision in assembling and maintaining equipment is necessary to ensure safety and performance.- **Teamwork:** Must work well within a team, collaborating with others to achieve common goals in the workplace.- **Communication Skills:** Effective communication is important for reporting issues and discussing tasks with colleagues and supervisors.We welcome motivated candidates who are eager to learn and develop their skills in a hands-on mechanical environment.

Perform welding using MIG, TIG, and ARC processes on mild steel, stainless steel, Carbon Steel and structural componentsRead and interpret engineering drawings, WPS (Welding Procedure Specifications), and symbolsEnsure accurate joint preparation, alignment, and dimensional controlConduct visual inspection of welds to meet quality standards and avoid defects (porosity, cracks, undercut, etc.)Carry out rework and repair welding as per quality feedbackMaintain proper electrode handling, gas usage, and machine settingsFollow 5S standards, shop floor discipline, and production timelinesEnsure strict adherence to safety norms, PPE usage, and EHS guidelinesCoordinate with production supervisors and quality inspectors

As a MIG Welder in Mumbai, you will play a crucial role in the production process by joining metal parts using MIG welding techniques. This full-time position requires a strong attention to detail and the ability to work in a fast-paced environment.**Key Responsibilities:**- **Perform MIG Welding:** Use MIG welding equipment to fuse metal components together, ensuring strong and precise joints.- **Read Blueprints:** Interpret technical drawings and specifications to understand the requirements for each welding project.- **Check Weld Quality:** Inspect welds for consistency and quality, making adjustments as necessary to meet standards.- **Maintain Equipment:** Regularly clean and maintain welding tools and machines to ensure safety and efficiency in operations.- **Adhere to Safety Protocols:** Follow safety guidelines to prevent accidents and injuries while working in the welding environment.- **Collaborate with Team Members:** Work closely with other welders and workshop staff to complete projects on time and to specifications.**Required Skills and Expectations:**Candidates should have a minimum of a 10th-grade education and at least 4 years of experience in MIG welding. You must demonstrate proficiency in welding techniques and safety practices. Good communication skills are essential for teamwork, and a dedicated approach to quality control is expected. Candidates should possess physical strength and stamina to handle the demands of welding tasks efficiently. Additionally, having a solid understanding of the relevant tools and equipment is necessary for success in this role.

Key Responsibilities1. Welding OperationsSetup and Operation: Set up, calibrate, and operate arc welding equipment (e.g., SMAW/Stick, MIG/GMAW, TIG/GTAW) and related tools such as grinders, plasma cutters, and torches.Blueprint Interpretation: Read and accurately interpret blueprints, engineering drawings, and Welding Procedure Specifications (WPS) to determine the required welding technique, materials, and dimensions.Welding Performance: Perform high-quality welding in various positions (flat, horizontal, vertical, overhead, and pipe/6G) on different materials such as carbon steel, stainless steel, and alloys.Fabrication: Align, fit, and tack-weld components into final positions using jigs, clamps, and hand tools before performing the final weld.2. Preparation and Quality ControlMaterial Preparation: Prepare materials for welding by cleaning, grinding, beveling, or cutting metal surfaces to ensure a proper joint and fusion.Inspection: Visually inspect completed welds for defects such as porosity, undercut, and slag inclusions, and perform necessary repairs or re-welding to meet quality specifications.Testing: Assist in performing tests (e.g., destructive or non-destructive testing) on welds as required by quality control standards.Maintenance: Perform routine cleaning and maintenance of welding machines, cables, electrodes, and work area to ensure equipment is functioning safely and efficiently.3. Safety and ComplianceSafety Adherence: Strictly adhere to all safety protocols, including wearing appropriate Personal Protective Equipment (PPE) such as helmets, heat-resistant gloves, and safety shoes.Code Compliance: Ensure all welding work is carried out in compliance with recognized industry codes and standards (e.g., AWS D1.1, ASME Section IX).Hazard Reporting: Immediately identify and report any hazards, equipment defects, or non-compliant work practices to the supervisor.

Designation :- WelderQualification:- ITIExperience :- 0 to 5 YearsSalary:- As per interview Gender:- MaleJob Time:- 12 Hours (Day Shift)Job Location:- Umbergaon, GujaratIndustry:- Manufacturing Industry

Designation :- MIG Welder Experience:- 1 Years To 2 Years Salary:-18,000 To 20,000Gender:- MaleJob Time:- 8 Hours+Room+CanteenJob Location:- Palghar Maharashtra Industry:- Manufacturing Company

We are looking for Skilled Tig welders and SS Sheet metal fabrication fitter for our company, if anyone intrested pls do call us

We are looking for sheet metal fabrication fitter cum Tig welder, Candidate should be well versed with sheet metal fabrication fitting work, can do individually, should know to understand the drawing development, should know cutting, bending, welding. complete assembly,

We are seeking a skilled TIG & Arc Welder with 1 to 3 years of experience to join our team in Salem. The ideal candidate will have a strong understanding of welding techniques and a commitment to quality work.**Key Responsibilities:**- **Perform TIG and Arc Welding:** Use tungsten inert gas (TIG) or manual metal arc (MMA) welding processes to join metal parts, ensuring precision and accuracy in every weld.- **Read and Interpret Blueprints:** Understand and analyze technical drawings and welding blueprints to determine specifications and project requirements.- **Inspect Welds:** Conduct thorough inspections of completed welds to check for quality and adherence to industry standards.- **Maintain Welding Equipment:** Regularly clean and maintain welding tools and equipment to ensure they are operating efficiently and safely.- **Collaborate with Team Members:** Work closely with other welders and staff to complete projects on time, discussing challenges and solutions as they arise.**Required Skills and Expectations:**The candidate must have a minimum education level of 10th grade and should be able to demonstrate proficiency in both TIG and Arc welding techniques. A strong attention to detail and a commitment to safety is crucial. Good communication skills are necessary for effective collaboration with team members. The role requires physical stamina and manual dexterity to handle welding tools and materials safely. Applicants should be ready to work full-time in an office setting and be adaptable to various welding tasks and technologies.