Welder Jobs in India

Here is a detailed and highly functional job description for an Industrial Welder. This profile is tailored for engineering, sheet metal, and structural fabrication environments, where precision, blueprint reading, and safety are paramount.Job Description: Industrial Welder / Fabricator Department: Production / Fabrication Shop / MaintenanceReports To: Welding Supervisor / Production Engineer Experience Level: 2-5 years (ITI / Welder Certification preferred)Job Purpose The Welder is responsible for joining metal components, plates, tubes, and structures using various industrial welding techniques based on blueprint specifications. This role requires a high level of manual dexterity, an understanding of metallurgy, and strict adherence to dimensional tolerances to ensure strong, defect-free welded joints that meet rigorous quality standards.Key Responsibilities1. Welding Operations & Techniques Multi-Process Welding: Set up and operate welding equipment to perform high-quality MIG (Metal Inert Gas), TIG (Tungsten Inert Gas), and SMAW (Shielded Metal Arc/Stick) welding based on the material thickness and job specifications.Machine Calibration: Adjust welding machine parameters, including current (amperage), voltage, gas flow rate, and wire feed speed, to match the specific metal type (Mild Steel, Stainless Steel, or Aluminum).Positional Welding: Execute clean and structurally sound welds in various positions, including flat, vertical, horizontal, and overhead positions.2. Fit-Up & Fabrication Support Blueprint Analysis: Read and interpret mechanical engineering drawings, welding symbols, layouts, and process sheets to determine the required weld dimensions and sequences. Pre-Weld Preparation: Clean, grind, bevel, and clamp metal pieces together to ensure a perfect fit-up. Use measuring tools like vernier calipers, pitch gauges, and squares to verify alignment before striking an arc. Tack Welding: Apply precise tack welds to temporarily secure structures in place before executing the final continuous weld bead, preventing thermal warping or distortion.3. Quality Assurance & Defect Prevention Visual Inspection: Conduct immediate post-weld visual inspections to check for common welding defects such as porosity, undercut, slag inclusion, cracks, or lack of penetration.Post-Weld Finishing: Use chipping hammers, wire brushes, and angle grinders to clean slag, remove spatter, and smooth out weld seams for a neat finish.4. Safety & Shop Floor Discipline PPE Enforcement: Operate with absolute compliance regarding welding safety gear, including auto-darkening welding helmets, leather aprons, welding jackets, and heavy-duty heat-resistant gloves.Fume & Fire Safety: Ensure the welding booth extraction systems are active and maintain a clear, hazard-free zone around flammable gas cylinders (Argon, $CO_2$, Acetylene).

We are looking for a skilled and experienced Welder to join our team. The candidate should have hands-on experience in Electric Welding and CO2 Welding along with knowledge of gas cutting and fabrication work. The ideal candidate should be hardworking, safety-conscious, and capable of handling fabrication and welding tasks efficiently.Key ResponsibilitiesPerform Electric Welding and CO2 Welding operations as per production requirements.Carry out gas cutting and fabrication work accurately.Read and understand fabrication drawings and welding specifications.Repair and maintain metal structures, machinery, and equipment.Ensure quality welding work with minimum defects.Operate welding tools and equipment safely and efficiently.Follow workplace safety guidelines and company policies.Coordinate with supervisors and fabrication teams for timely completion of work.Required SkillsKnowledge of Electric Welding and CO2 WeldingExperience in Gas Cutting and FabricationAbility to handle welding machines and fabrication toolsBasic understanding of technical drawingsGood practical and teamwork skillsEligibility CriteriaMinimum 1 year of relevant welding experienceITI Welder certification preferredPhysically fit and able to work in industrial environment

As a TIG & Arc Welder, you will play a vital role in the fabrication and production process by using specialized welding techniques to join metal parts. This position is based in Kollam and requires individuals with 4 to 5 years of relevant experience.**Key Responsibilities:**- **Perform TIG and Arc Welding:** Execute welding techniques to fuse metal components, ensuring precise and high-quality welds according to project specifications.- **Read and Interpret Blueprints:** Understand engineering drawings and specifications to determine the welding requirements and methods needed for each task.- **Inspect Welds for Quality:** Conduct inspections of completed welds to ensure they meet safety and quality standards, addressing any issues promptly.- **Maintain Equipment:** Regularly check and maintain welding equipment to ensure optimal performance, including cleaning and troubleshooting minor issues.- **Ensure Safety Compliance:** Follow all safety protocols and guidelines to maintain a safe work environment for yourself and your colleagues.**Required Skills and Expectations:**- Candidates must have a minimum of 4 to 5 years of experience in TIG and Arc welding.- A 12th-grade education is required; additional vocational training in welding techniques is a plus.- Strong hand-eye coordination and attention to detail are essential for producing high-quality welds.- Ability to read blueprints and technical drawings accurately.- Good communication skills to effectively collaborate with team members and supervisors.- Must be physically fit, as the job may require lifting and standing for extended periods.

We are looking for a skilled MIG Welder to join our team in Begampur. The ideal candidate should have 1 to 3 years of experience in welding and must have completed at least the 10th grade. This role is contractor-based and requires male applicants willing to work from the office.**Key Responsibilities:**- **MIG Welding:** Perform MIG welding on various metals, ensuring strong and clean weld joints according to project specifications.- **Quality Inspection:** Examine completed welds to confirm they meet industry standards and customer expectations, making necessary adjustments to improve quality.- **Equipment Maintenance:** Regularly check and maintain welding equipment to ensure safe and efficient operation, reporting any issues to supervisors promptly.- **Safety Compliance:** Follow all safety procedures and guidelines to create a safe working environment for yourself and your teammates.- **Collaboration:** Work closely with team members and supervisors to coordinate tasks and improve welding processes for greater efficiency.**Required Skills and Expectations:**Applicants should have a solid understanding of MIG welding processes and techniques. You must be able to read and interpret blueprints and technical drawings to execute welding tasks accurately. Attention to detail and precision are essential to ensure high-quality results. Strong communication skills are important for effective teamwork, and a commitment to safety practices is crucial. Candidates should be physically fit to perform manual tasks and work in a workshop environment.

We are looking for a skilled Arg Welder with at least 2 years of experience to join our team in Kondhwa, Pune. The ideal candidate should have completed their 10th grade and be eager to work in a full-time, office-based environment.Key Responsibilities: - **Welding Operations**: Perform argon welding on various metals, ensuring high-quality and precise welds. - **Material Preparation**: Prepare metal pieces for welding by cleaning and cutting them to the required dimensions. - **Quality Control**: Inspect finished welds to ensure they meet required specifications and standards. - **Safety Practices**: Follow all safety guidelines and protocols to maintain a safe work environment. - **Collaboration**: Work closely with other team members to complete projects efficiently and on time.Required Skills and Expectations: Candidates must demonstrate strong technical skills, particularly in argon welding techniques. Attention to detail is crucial, as high-quality welds are essential for the success of our projects. Good communication skills are needed to work effectively with team members and supervisors. The ability to read and interpret technical drawings or blueprints is a plus. The position requires physical stamina and strength to handle heavy materials and operate welding equipment. A proactive attitude and willingness to learn are key traits for success in this role.

Job profile- Mig welderSalary- 18kExperience- 1-2 yearsJob location- Sikri, Ballabhgarh,( faridabad) JOB TYPE Full-Time / Permanent Perform MIG welding in strict accordance with provided technical drawings. Hold and secure MS (Mild Steel) fabrication components safely with a proper, clean finishing. Consistently maintain exceptional welding quality, accuracy, and structural integrity.Coordinate closely with the core fabrication team throughout all stages of production. Operate welding machines, heavy tools, and equipment safely and efficiently. Strictly follow all established safety protocols, workplace hazards guidelines, and quality standards

We are seeking a dedicated and detail-oriented Machine Operator to join our team in Chennai. The ideal candidate will be responsible for operating and maintaining machinery to ensure efficient production processes.**Key Responsibilities:**- **Machine Operation:** Operate various machines to carry out production tasks, ensuring high-quality output. You will be responsible for adjusting settings as needed.- **Quality Control:** Monitor the production process and perform quality checks on finished products to ensure they meet specifications. Your attention to detail will help maintain quality standards.- **Maintenance:** Carry out regular maintenance tasks on machines to ensure they function smoothly. This includes cleaning and lubricating equipment as required.- **Documentation:** Keep accurate records of production output and any issues encountered. This will help in tracking performance and improving processes.- **Team Collaboration:** Work closely with other team members to achieve production goals and support each other in daily operations. Good communication is essential for a smooth workflow.**Required Skills and Expectations:**- **Education:** A Diploma in a relevant field is required. This provides a foundation for understanding machine operations.- **Experience:** Previous experience in machine operation is preferred, but freshers may also apply. A willingness to learn is crucial.- **Attention to Detail:** Ability to focus on small details to ensure quality control and safe machine operation.- **Teamwork:** Strong communication skills to effectively collaborate with colleagues and support a positive work environment.- **Physical Stamina:** Must be able to stand for long periods and lift moderate weights as required in the production environment.

We are looking for a skilled MIG Welder to join our team in Mundka. The ideal candidate will have 3 to 6 years of hands-on experience in MIG welding and must have completed at least the 10th grade. **Key Responsibilities:**- **MIG Welding Operations:** Perform MIG welding on various metal components, ensuring strong and accurate welds that meet industry standards.- **Equipment Maintenance:** Regularly maintain and check welding equipment to ensure efficiency and safety during operation.- **Blueprint Interpretation:** Read and interpret technical drawings and blueprints to understand the specifications for work.- **Quality Control:** Inspect finished products for quality and adherence to specifications, making necessary adjustments or repairs.- **Collaboration:** Work closely with other team members and departments to ensure smooth workflow and timely project completion.- **Safety Compliance:** Follow all safety protocols and guidelines to maintain a safe work environment for yourself and colleagues.**Required Skills and Expectations:**- Proven experience in MIG welding, with a strong understanding of welding techniques and materials.- Ability to read and interpret technical drawings and schematics accurately.- Strong attention to detail and a commitment to producing high-quality work.- Good physical stamina and manual dexterity to handle equipment and materials effectively.- Team-oriented with excellent communication skills to work collaboratively with colleagues.- Proven problem-solving skills to address welding issues as they arise.

We are looking for a skilled Welder to join our team in the Industrial Area Phase I. The ideal candidate should have 1 to 7 years of experience and must have completed at least the 10th grade. This full-time position requires a strong commitment to quality and safety standards.Key Responsibilities:- **Perform Welding Tasks**: Execute welding operations on various materials following blueprints and specifications to ensure strong and precise joints.- **Maintain Equipment**: Regularly inspect and maintain welding tools and machines to ensure they are in good working condition, preventing breakdowns and ensuring efficiency.- **Read Blueprints**: Interpret technical drawings and schematics to understand the dimensions and specifications needed for projects, ensuring accuracy in work.- **Ensure Safety Compliance**: Follow all safety protocols and regulations to prevent workplace accidents, maintaining a safe working environment for yourself and your colleagues.- **Collaborate with Team**: Work alongside other welders and team members, communicating effectively to ensure that projects are completed on time and meet quality standards.Expectations and Required Skills:- **Experience**: A minimum of 1 year and a maximum of 7 years in welding, with proficiency in various welding techniques.- **Attention to Detail**: Ability to focus on specific details and maintain high standards in work quality.- **Communication Skills**: Strong verbal communication skills for clear collaboration with team members and understanding project requirements.- **Physical Stamina**: Capability to perform physically demanding tasks, including lifting heavy materials and standing for long periods.- **Willingness to Learn**: An eagerness to improve welding skills and stay updated with industry practices and techniques.

Job Description: Fabrication EngineerCompany OverviewUnifence Solutions India Pvt. Ltd. is a leading manufacturer in the infrastructure and industrial solutions sector, specializing in high-performance fencing systems, industrial fabrication, HVAC/utility supports, and telecom structures. Role SummaryWe are looking for a skilled and detail-oriented Fabrication Engineer to oversee and optimize our production processes. You will be responsible for translating engineering drawings into structural reality, ensuring high-quality welding, cutting, and assembly operations while maintaining strict safety standards.Key ResponsibilitiesProduction Planning: Supervise day-to-day fabrication, welding, and assembly activities to meet delivery timelines.Drawing Interpretation: Read and interpret complex fabrication drawings, GA (General Arrangement) layouts, and structural blueprints accurately.Quality Control: Inspect structural components, welding quality, and material finishes (such as galvanization or powder coating) to ensure alignment with client specifications.Resource & Team Management: Lead a team of welders, fitters, and operators, ensuring maximum machine utilization and minimal material wastage.Process Improvement: Identify bottlenecks in the production line and implement corrective actions.Requirements & QualificationsEducation: B.E. / B.Tech or Diploma in Mechanical / Production Engineering.Experience: 1 to 4 years of hands-on experience in heavy/industrial metal fabrication, welding processes, or structural steel manufacturing.Skills: Proficiency in reading engineering drawings, knowledge of QA/QC inspection tools (Vernier, Gauges), and understanding of fabrication safety protocols.

We are seeking a skilled Mechanical Fitter to join our team in Kolkata. The ideal candidate will have 3 to 7 years of experience and will be responsible for assembling, installing, and maintaining mechanical systems.Key Responsibilities:1. **Assemble Mechanical Components**: You will be tasked with assembling various mechanical parts according to specifications. Accuracy and attention to detail are essential to ensure proper functioning.2. **Installation**: You will install mechanical equipment and machinery at job sites, ensuring they are safely and accurately fitted. You must be able to work with a variety of tools and assist in setup.3. **Maintenance and Repairs**: Regular maintenance of equipment is crucial. You will inspect machines, identify issues, and perform necessary repairs to minimize downtime and ensure equipment reliability.4. **Read Technical Drawings**: You will interpret technical diagrams and blueprints to understand specifications clearly. This skill is vital for ensuring that assemblies are completed precisely.5. **Collaborate with Team**: You will work closely with engineers and other team members to ensure projects are completed on time and according to quality standards.Required Skills and Expectations:The ideal candidate must possess strong mechanical aptitude and the ability to troubleshoot equipment problems efficiently. You should have experience working with hand tools and measuring devices. A commitment to safety and a willingness to learn new techniques are also important. Good communication skills are necessary for effective teamwork and collaboration.

As a MIG Welder, you will play a crucial role in the production process by efficiently welding metal components together. This position is for individuals looking to start their career in welding, with a focus on MIG welding techniques.**Key Responsibilities:**- **Perform Welding Tasks:** Use MIG (Metal Inert Gas) welding techniques to join metal parts together, ensuring strong and precise welds.- **Read and Interpret Blueprints:** Understand and follow technical drawings and specifications to ensure accurate work according to project requirements.- **Maintain Equipment:** Regularly check and maintain welding equipment and tools to ensure they are in good working condition, minimizing downtime.- **Inspect Welds:** Conduct quality checks on completed welds to confirm they meet safety and quality standards, making necessary adjustments as needed.- **Follow Safety Protocols:** Adhere to all workplace safety rules and regulations to ensure a safe working environment for yourself and your coworkers.**Required Skills and Expectations:**- **Basic Welding Knowledge:** Familiarity with MIG welding processes is advantageous, but training will be provided for beginners.- **Attention to Detail:** Ability to focus on the fine details of each weld, ensuring they meet the specifications outlined in project plans.- **Physical Stamina:** Capable of performing manual tasks and standing for long periods in a typical workshop setting.- **Team Player:** Willingness to work collaboratively with colleagues to complete projects efficiently and effectively.- **Positive Attitude:** A strong desire to learn and develop skills in welding and related trades, contributing positively to the work environment.

Job Opening: MIG Welder / FitterLocation: Bahadurgarh, Haryana Experience: 3+ years We are a leading manufacturer of Cooling Towers, Gasifiers, and Pollution Control Products etc seeking an experienced **MIG Welder / Fitter . The role involves welding, fitting, and fabrication of industrial equipment, interpreting technical drawings, and ensuring high-quality standards. Requirements: - ITI/Diploma in Welding/Mechanical or equivalent - 3+ years of MIG welding & fitting experience - Knowledge of fabrication, safety standards, and industrial materials Benefits: Competitive salary, PF/ESI, overtime allowance, and growth opportunities.

We are looking for a dedicated Arc Welder to join our team in Sikanderpur. The ideal candidate should be a male with a minimum educational qualification of 10th pass and have 0 to 2 years of experience in welding. This full-time position requires someone who is willing to work from the office.**Key Responsibilities:**- **Perform Welding Tasks**: Use arc welding techniques to join metal components together in a variety of projects.- **Read Technical Drawings**: Understand blueprints and technical drawings to ensure accurate measurements and specifications are met.- **Maintain Equipment**: Regularly check and maintain welding equipment to ensure it operates efficiently and safely.- **Follow Safety Protocols**: Adhere to safety protocols and guidelines to minimize risks and ensure a safe work environment for yourself and your coworkers.- **Inspect Welds**: Assess the quality of welds to ensure they meet required standards and specifications.**Required Skills and Expectations:**- Basic knowledge of arc welding techniques and equipment is essential.- Ability to read and interpret technical drawings and blueprints.- Strong attention to detail and focus on quality of work.- Good communication skills to effectively collaborate with team members.- Willingness to learn and adapt to new welding practices and technologies.- Strong work ethic and commitment to meeting deadlines and project goals.This position is ideal for individuals looking to start their career in welding and grow their skills in a supportive environment.

As a Fabricator, you will be responsible for shaping and assembling metal products according to specifications. Your expertise and attention to detail will ensure high-quality and precise production.**Key Responsibilities:**- **Read and Interpret Blueprints:** You will study technical drawings and specifications to understand project requirements and design details.- **Cut and Shape Materials:** Using various tools and machines, you will cut and form metal materials to create components for assembly.- **Weld and Join Materials:** You will perform welding and other joining processes to connect metal parts according to assembly requirements.- **Inspect Finished Products:** Conduct quality checks on completed projects to ensure they meet design specifications and standards.- **Maintain Equipment:** You will perform routine maintenance on tools and machines to ensure they are in good working condition.- **Collaborate with Team Members:** Work closely with other fabricators and team members to ensure efficient workflow and production timelines.**Required Skills and Expectations:**Candidates should have 5 to 11 years of experience in fabrication. A minimum education of 10th grade is required. You must possess strong technical skills in operating machinery and tools related to metalwork. Attention to detail and problem-solving abilities are crucial. Candidates should be able to work independently and in a team, adhering to safety practices and protocols. A positive attitude and a commitment to quality are essential for success in this role.

We are looking for a skilled TIG & Arc Welder to join our team in Coimbatore. The ideal candidate will have 1 to 3 years of experience and must be able to work effectively in a team environment. **Key Responsibilities:**- **TIG Welding:** Perform tungsten inert gas (TIG) welding to join metal parts, ensuring high-quality and precise results for various projects.- **Arc Welding:** Use arc welding techniques to fabricate and assemble metal components, focusing on safety and efficiency.- **Blueprint Reading:** Read and interpret technical drawings and specifications to understand project requirements and weld positions.- **Quality Control:** Inspect and test welded joints to ensure they meet the required standards and specifications, making corrections as needed.- **Maintenance:** Maintain welding equipment and tools, ensuring they are clean, functional, and safe to use.- **Collaboration:** Work closely with other team members to coordinate tasks and complete projects on time, ensuring effective communication throughout.**Required Skills and Expectations:**- **Technical Skills:** Proficiency in TIG and arc welding techniques, with a strong understanding of welding safety practices.- **Attention to Detail:** Ability to focus on quality and precision, ensuring that all welds are clean and strong.- **Problem-Solving:** Capable of identifying issues during the welding process and providing effective solutions to ensure high standards.- **Team Player:** Willing to collaborate with others and share knowledge, contributing positively to the team environment.- **Physical Stamina:** Must be physically fit to handle the demands of the job, including standing for extended periods and lifting heavy materials. Candidates must be male and have completed at least 10th standard education.

We are looking for a skilled Fabrication Fitter to join our team in Konanakunte. The ideal candidate will play a crucial role in constructing and assembling metal structures and components.**Key Responsibilities:**- **Reading Technical Drawings:** Interpret and understand blueprints and technical specifications to ensure accurate fabrication of metal parts.- **Assembly:** Assemble metal components by welding, bolting, or fastening, ensuring solid and precise connections for durability.- **Cutting and Shaping Materials:** Use tools such as band saws, grinders, and shears to cut and shape metal to required dimensions.- **Maintenance of Tools:** Regularly inspect and maintain tools and equipment to ensure safety and efficiency during fabrication processes.- **Quality Control:** Conduct inspections of finished products to ensure they meet safety standards and specifications, making adjustments as necessary.- **Collaboration:** Work closely with other team members and departments to effectively execute projects and resolve any issues that may arise during production.**Required Skills and Expectations:**Candidates should possess a minimum of 2 to 5 years of relevant experience as a Fabrication Fitter, with a strong understanding of metal fabrication processes. A basic education level of 10th grade is required. Attention to detail, good manual dexterity, and the ability to work in a team are essential. Candidates must have a solid understanding of safety practices and the ability to follow instructions. Effective communication skills will help in coordinating tasks and solving problems. This position is full-time and requires working from the office. Male candidates are preferred for this role.

We are looking for a skilled Welder in Cuttack who will be responsible for joining metal components using various welding techniques. The ideal candidate should have a hands-on approach, with experience in reading blueprints and plans to meet project specifications.**Key Responsibilities:**- **Welding Operations**: Perform welding tasks using techniques such as MIG, TIG, and arc welding to fabricate or repair metal structures and components, ensuring solid junctions.- **Blueprint Interpretation**: Read and understand technical drawings and specifications to determine the appropriate welding methods and materials required for each project.- **Quality Control**: Inspect completed welds for structural integrity and compliance with safety standards, correcting any defects to ensure high-quality workmanship.- **Maintenance of Equipment**: Regularly check and maintain welding tools and equipment to ensure they are in good working condition, minimizing downtime and enhancing safety.- **Collaboration**: Work closely with other team members and supervisors to meet project deadlines and goals, contributing to a positive and productive work environment.**Required Skills and Expectations:**- A minimum of 1-5 years of welding experience is preferred to ensure skill proficiency.- Candidates must have completed at least the 10th grade to be considered for this role.- Strong understanding of welding techniques and metal properties is essential.- Attention to detail and the ability to produce high-quality welds are critical.- Must be able to work in a fast-paced environment and meet strict deadlines.- A professional attitude and good communication skills are important for collaboration with team members.

Knowledge of Robot Teaching and programming of KUKArobot, ABB robot and YASHKAWA MOTOMAN welding robot etc. Knowledge of sheet metal parts, mig & mag weldingparameters, spot resistance and projection resistance welding parameters and welding defects etc. Basic knowledge of PLC Maintenance. Man power handling and timely execution of production plan. Responsible for product /process audit as per control plan. Working on cycle time, planning to improve the production and reduce the possibility of rejection.

Key Responsibilities1. Welding OperationsSetup and Operation: Set up, calibrate, and operate arc welding equipment (e.g., SMAW/Stick, MIG/GMAW, TIG/GTAW) and related tools such as grinders, plasma cutters, and torches.Blueprint Interpretation: Read and accurately interpret blueprints, engineering drawings, and Welding Procedure Specifications (WPS) to determine the required welding technique, materials, and dimensions.Welding Performance: Perform high-quality welding in various positions (flat, horizontal, vertical, overhead, and pipe/6G) on different materials such as carbon steel, stainless steel, and alloys.Fabrication: Align, fit, and tack-weld components into final positions using jigs, clamps, and hand tools before performing the final weld.2. Preparation and Quality ControlMaterial Preparation: Prepare materials for welding by cleaning, grinding, beveling, or cutting metal surfaces to ensure a proper joint and fusion.Inspection: Visually inspect completed welds for defects such as porosity, undercut, and slag inclusions, and perform necessary repairs or re-welding to meet quality specifications.Testing: Assist in performing tests (e.g., destructive or non-destructive testing) on welds as required by quality control standards.Maintenance: Perform routine cleaning and maintenance of welding machines, cables, electrodes, and work area to ensure equipment is functioning safely and efficiently.3. Safety and ComplianceSafety Adherence: Strictly adhere to all safety protocols, including wearing appropriate Personal Protective Equipment (PPE) such as helmets, heat-resistant gloves, and safety shoes.Code Compliance: Ensure all welding work is carried out in compliance with recognized industry codes and standards (e.g., AWS D1.1, ASME Section IX).Hazard Reporting: Immediately identify and report any hazards, equipment defects, or non-compliant work practices to the supervisor.

industrial product, welding equipement ,machine sales,

We are seeking a skilled TIG & Arc Welder with 1 to 3 years of experience to join our team in Salem. The ideal candidate will have a strong understanding of welding techniques and a commitment to quality work.**Key Responsibilities:**- **Perform TIG and Arc Welding:** Use tungsten inert gas (TIG) or manual metal arc (MMA) welding processes to join metal parts, ensuring precision and accuracy in every weld.- **Read and Interpret Blueprints:** Understand and analyze technical drawings and welding blueprints to determine specifications and project requirements.- **Inspect Welds:** Conduct thorough inspections of completed welds to check for quality and adherence to industry standards.- **Maintain Welding Equipment:** Regularly clean and maintain welding tools and equipment to ensure they are operating efficiently and safely.- **Collaborate with Team Members:** Work closely with other welders and staff to complete projects on time, discussing challenges and solutions as they arise.**Required Skills and Expectations:**The candidate must have a minimum education level of 10th grade and should be able to demonstrate proficiency in both TIG and Arc welding techniques. A strong attention to detail and a commitment to safety is crucial. Good communication skills are necessary for effective collaboration with team members. The role requires physical stamina and manual dexterity to handle welding tools and materials safely. Applicants should be ready to work full-time in an office setting and be adaptable to various welding tasks and technologies.

We are looking for a skilled Fitter Turner to join our team in Salem. This role is suitable for candidates with 1 to 3 years of experience and a minimum education of 10th pass. **Key Responsibilities:**- **Machine Operation:** Safely operate turning and fitting machines to produce high-quality metal components according to specifications.- **Blueprint Reading:** Read and interpret engineering drawings and blueprints to understand production requirements and dimensions. - **Precision Measurement:** Use measuring tools like calipers and micrometers to ensure components meet precise specifications and tolerances.- **Quality Control:** Inspect finished products for defects or imperfections, ensuring they meet quality standards before passing them on to the next stage.- **Maintenance of Equipment:** Perform routine maintenance on machines and tools to keep them in good working condition and report any technical issues.- **Collaborate with Team:** Work closely with other team members to coordinate tasks and ensure production efficiency and quality.**Required Skills and Expectations:**Candidates must have strong mechanical skills and a good understanding of machining processes. They should be able to work effectively under tight schedules while maintaining high-quality standards. Attention to detail, problem-solving abilities, and a strong commitment to safety are essential. The ideal candidate should also be a team player with good communication skills, able to take instructions and provide feedback as needed. Previous experience with CNC machines will be an advantage. This is a full-time position based in the office environment.

We are looking for a skilled Fitter Turner to join our team in Coimbatore. This is a full-time position for males with 1 to 3 years of experience in fitting and turning. The ideal candidate should have completed at least 10th grade.**Key Responsibilities:**- **Machine Operation:** Operate milling machines and lathes to manufacture precision parts, ensuring they meet technical specifications. - **Fitting Components:** Assemble and fit machine parts, ensuring that they are aligned and functioning properly for optimal performance. - **Quality Checks:** Perform regular inspections and quality checks on components to ensure they meet required standards and specifications.- **Maintenance:** Conduct routine maintenance on machines and tools to keep them in good working condition and minimize downtime.- **Reading Technical Drawings:** Interpret and understand engineering drawings and blueprints to accurately create and assemble components.**Required Skills and Expectations:**Candidates should have a strong knowledge of fitting and turning processes, including the ability to use various hand tools and measuring instruments. Proficiency in reading engineering drawings is essential. Good problem-solving skills and attention to detail are important for ensuring high-quality workmanship. Candidates should also have the ability to work effectively in a team and communicate clearly with colleagues. A basic understanding of safety practices in a workshop environment is expected.