Power Electronics Engineer Jobs in India

We are hiring UPS & Battery Maintenance Engineers for client-site service roles. Responsibilities include installation, preventive maintenance, and troubleshooting of UPS systems and batteries. Candidates must be willing to travel and handle emergency service calls. Prior experience in power backup systems is preferred.Candidates must have their own vehicle; service and fuel charges will be reimbursed.

highly skilled Electronics & Telecommunication Engineer with expertise in circuit design, embedded systems, wireless communication, and signal processing. Proficient in VLSI, IoT, automation, and power electronics, with hands-on experience in microcontrollers (Arduino, Raspberry Pi, ARM), FPGA programming (Verilog, VHDL), and telecommunication technologies (4G, 5G, RF, Optical Fiber). Strong knowledge of network protocols, troubleshooting electronic systems, and industrial automation (PLC, SCADA, HMI). Adept at problem-solving, teamwork, and project management, ensuring efficient system design and optimization.

Profile : Power Electronic Engineer Experience :5+yearsLocation: Pune/Gurugram.Work mode : 5daysNotice period: 30days.Mandatory Skill:Electric Vehicle systems (Battery Management System, Motor Control, Charging Controller etc)Key-skills: Hardware Design, Electric Vehicle, DC-DC, AC-DC, EV component design, Power electronics IGBT, MOSFET, On-board chargers, Electric Motor, ECUs Product Experience & Technical Expertise: Technical Specification Document preparation w.r.to customer System Requirement Document/Statement of Requirements. Hardware circuit understanding and deep knowledge of Inverter and power supply circuits. Analog and Digital design expertise. Selection of the right ICs/ devices as per application requirement, performance/ cost/ weight/ durability optimization. Ability to do complete design including mathematical modeling for worst-case scenario calculation Experience in EV - Embedded Products - Hardware-software design, development, and testing Make the Stress Analysis, and MTBF reports for the designed products based on the real-world use case 8. Magnetics design knowledge or experience AC-DC & DC-DC Topology selection knowledge & experience Role & responsibility: Product Development Technical Lead for Electric Vehicle Domain Drive the execution phases of all stages from System Requirements to Product launch for EV Products First Time Right Design, Time to Market, Reduced Customer Turnaround time Proactive Planning on the way forward executions Identifying the Key challenges, Risks before Start of the Project Risk Mitigation plan(s) for all the identified Key challenges and Risk. Establish strong people connections and drive the Cross Function Team deliverables in convincing and influencing with technical justification on their tasks Design Documentation Technical enthusiasm to incorporate new technologies to e-Mobility domainDrop your cv - astha.sisodiya@technokrate.com

Designing power electronic circuits and systems, focusing on sustainability and efficiency.Simulating and modeling power electronics systems to ensure stability and functionality.Developing control algorithms for power electronic systems using various techniques and tools.Conducting experimental tests and evaluations on power electronic prototypes to verify designs and ensure compliance with technical specifications and safety standards.Along with basic qualification candidates should have Hands-on experience with power electronics tools and software, such as MATLAB/Simulink, PSpice, and others relevant to the specific industry or job role.A solid foundation in digital and analog circuit design, as well as a thorough understanding of electronic components such as microcontrollers, semiconductors, and transformers.

Responsible for Float EnquiryPrepare ComparativeNegotiation with supplierPO preparation in ERPMaterial Follow upShould have experience in electrical purchase up to 400kv transmission line Should have experience in procurement of substation equipmentInterested candidate can share their CV's on tabncppl@gmail.com

Urgent Requirement for Ups Service Engineer, Candidate should have work experience in ups batteries

To work as part of a design and development team in the design, procurement, prototyping, optimization, testing and qualification of the power converters and other power electronics circuits with primary focus on EV charging applications. Following proper documentation and test plans as per industrial standards during the design process. The candidate should have good written and verbal communication skills and be able to work in a team effectively. This position requires support for new products as well as legacy products. Experience in Power Electronics is a must - AC to DC SMPS power topologies like Full Bridge, Half Bridge, Fly-back, Forward, Push-Pull and DC-DC Converters. Experience in circuit design using MOSFETs (Si and SiC), IGBTs, Thyristors, Rectifiers (Si and SiC), Power Management ICs (Gate Drivers, PWM Controllers, LDOs, Switching Regulators). Experienced in design of complex analog, digital, and power multi-layer printed circuit boards for high density and high parts count power supply applications (Charger, Power supply, DC-DC converter etc.). Knowledgeable in switched-mode power supply PCB design constraints: spacing requirements for high voltages and PCB track sizing for high current; layout practices to mitigate EMI issues; mounting of heavy components such as magnetics, heatsinks, and busbars. Knowledgeable in electronics packaging and design for manufacturability to minimize cost and labour content. Knowledge desirable in CAD modelling and simulation of PCB electrical and thermal characteristics.

1. Selection of power electronic power devices, drive circuit design, and heat dissipation scheme design;2. Selection of passive components for power electronic circuits, EMC circuit design;3. Power electronic circuit topology design, simulation design, parameter calculation, and writing of relevant design documents;4. Single board schematic design, component selection, PCB design, BOM output;5. Single board test, power electronic circuit test, participate in the whole machine test, and write relevant test specification documents.1. Electronics, communications, automation, electromechanical, power electronics and other related majors2. More than five years of experience in power electronics hardware design and development3. Familiar with knowledge and skills related to power electronics, familiar with the working principle, key technical indicators, and device selection of common power devices such as IGBT, MOSFET, and SIC4. Familiar with the basic topology of power electronics, with design and development experience in two-level and three-level full bridge, BUCK-BOOST, LLC, PFC and other circuits5. Familiar with the design of drive and protection circuits for power electronics, signal conditioning circuits, analog signal acquisition circuits, and PCB designs6. Familiar with filter design and safety design of power electronic circuits7. Familiar with the selection of electrical components for power electronic circuits8. Familiar with heat dissipation design of power electronic devices9. Familiar with PSIM, MATLAB, PSPICE and other simulation software

Be responsible to Design, develop, integrate, test and deliver Products based on Power Electronics Working on various Semiconductor Devices Like SCR/FET/SiC MOSFET/IGBT, Filter designs and EMI EMC compliant Designs Requirements on Skill, Knowledge and Qualifications Proven working in Power Electronics product manufacturing Companies Like UPS , AMPLIFIERS, DRIVES, SOLAR INVERTORS , EV CHARGERS,DC POWERSUPPLIES etc

Redesign and Develop Power converters/ Inverters for PE (power electronics) Design, selection, specification, and validation of critical power components (e.g. IGBTs, SCR s, Diodes, capacitors, inductors, contactors, fuses, Contactors, disconnects etc.) Analyses failures seen on the product and find root cause, and implement improvements. The failures can come from market or production. 8D principle is used. Participate in idea generation on cost down possibilities. Support Testing Personals during the Product testing Familiarity Product Life cycle change management process. Familiar with Product change notification process and documentation. Provide technical clarification of designs with suppliers and manufacturing Work with a multi-disciplinary engineering development team that includes application engineering, controls engineering control hardware design, and test / validation. Work with supply chain teams and qualify components and assemblies during implementations and resolve issues as needed to maintain product and project quality, cost and deliverables Assist in solving critical customer casesBackground Skills: B.E (EEE/ECE/Power Electronics) and ME /M.Tech on Power Electronics and Drives Experience of 3 to 6 years Working knowledge on SMPS with different technology. Familiarity with analog electronics such as operational amplifiers, Comparators, multipliers, signal conditioning, filters etc. Familiarity with digital electronics including DSP, Microcontrollers FPGA s and its design implementations Familiarity with multiple communications media and protocol such as wired, wireless, RS-485, CAN, Modbus, TCP/IP etc Converters/Inverters, Magnetics, Capacitor, Power Components, Sensing Familiarity with Instrumentation and measurement of power convertersFamiliarity with IEC, UL, and CSA regulatory standards.Experience in using Cadence for PCB Board layout , PCB fabrication, assembly and testing

1. Designed and realized Defense / Aerospace products from Customer Specifications to EMI/EMC Certification 2. Experience with 400Hz systems, AC to DC, DC to DC converter indigenous design, SMPS design, Transformer designs3. Load estimation, Thermal calculations, Derating calculations, Reliability analysis , Shall have done Design calculations, Design documentation, Circuit Simulation and Failure Analysis4. Hands-on 1st time board bring-up and troubleshooting complex HW and SW issues, using test equipment like Logic Analyser, DMM and Oscilloscope5. Able to understand Customer Specifications, Design as per sepc, Testing and Delivery.6. PCB Schematics design using ECAD (PADS, Mentor graphics) 7. Familiarity with Simulation tools like LTspice, Matlab

We are searching for an innovative, deadline-driven mechatronics engineer to join our team. At Lucent drive, we focus on developing vertical wind turbines for power generation. Moreover, we develop innovative (variable shape) and efficient wind turbines to cope with high energy demand. The Electrical /Electronics Engineer's responsibilities include designing and developing mechanical and electronic systems for wind turbine power generation applications. In addition, he will be coordinating with the mechanical design team to design and develop various parts of wind turbines. As a mechatronics engineer, you should be able to work within demanding timeframes and develop original, practical solutions to problems. The position is located in Kakkanad, Cochin, Kerala.Hardware and software to control the varying design shapeShould have an open mind to learn new concepts and technology.Selecting the required tools and materials for the manufacturing process.Requirements:-Bachelor/Master in electronic engineering (Note: B-Tech in mechanical & M-Tech in Electronic or vice versa is also considered for application) Knowledge of power electronics is a must. Strong mathematical, analytical, and creative thinking skills are requiredA completed apprenticeship or additional courses would be advantageous.Ability to work in a team or alone.The candidate should have a basic knowledge of Fluid Dynamics, thermodynamics, and numerical methods. Position: Full-timeApplication deadline: ASAP.

ob Description Experience on complete product development lifecycle process Good experience in Power electronics product design & development Power electronics architecture/design of AC-DC, DC-DC converter High power Inverter design, converter topologies, switching methods & control, High voltage gate driver, Isolation design & High voltage protections. Design ability in power circuits using MOSFET/IGBT/SiC-Mosfet and corresponding Gate drive requirements. Design ability in magnetics design for high frequency transformer & Inductor Knowledge of circuit analysis tools: pSpice & LT Spice simulations, WCA(Worst case analysis) EMI/EMC design knowledge in product development Experience of interfacing Sensors with control hardware (Voltage, Current, Speed) Power circuit Test and Validation experience. Experience on preparing project plan. Hardware debugging tools like lab meters, oscilloscopes, waveform generator, power supplies, function generators Validation experience in EMI/EMC/ESD Interaction with cross functional teams (PCB, Software, Mechanical)

must have knowledge in IGBT based power systems particularly in the field of power supply . Based on over all performance like technical knowledge in the field /shouldering responsibilities etc salary used to be reviewed and refixed periodically .

Power electronics technician required for my workshop. Online UPS, SMPS & power system repair.

We are looking for a skilled Mechanical Engineer to join our team. A power engineer, also called a stationary engineer, is a technically skilled and certified professional who is responsible for the operation, maintenance, renovation, and repair of boiler systems and other mechanical systems in a facility. Construct and maintain substation areas and distribution operations.Educational Qualification:Diploma in Engineering or equivalent in concerned discipline with not less than 50% marks in aggregate for all candidates.The number of vacancies-250 Nos.

1. Designed and realized Defense / Aerospace products from Customer Specifications to EMI/EMC Certification 2. Experience with 400Hz systems, AC to DC, DC to DC converter indigenous design, SMPS design, Transformer designs3. Load estimation, Thermal calculations, Derating calculations, Reliability analysis , Shall have done Design calculations, Design documentation, Circuit Simulation and Failure Analysis4. Hands-on 1st time board bring-up and troubleshooting complex HW and SW issues, using test equipment like Logic Analyser, DMM and Oscilloscope5. Able to understand Customer Specifications, Design as per sepc, Testing and Delivery.6. PCB Schematics design using ECAD (PADS, Mentor graphics) 7. Familiarity with Simulation tools like LTspice, Matlab

Job Description Experience on complete product development lifecycle process Good experience in Power electronics product design & development Power electronics architecture/design of AC-DC, DC-DC converter High power Inverter design, converter topologies, switching methods & control, High voltage gate driver, Isolation design & High voltage protections. Design ability in power circuits using MOSFET/IGBT/SiC-Mosfet and corresponding Gate drive requirements. Design ability in magnetics design for high frequency transformer & Inductor Knowledge of circuit analysis tools: pSpice & LT Spice simulations, WCA(Worst case analysis) EMI/EMC design knowledge in product development Experience of interfacing Sensors with control hardware (Voltage, Current, Speed) Power circuit Test and Validation experience. Experience on preparing project plan. Hardware debugging tools like lab meters, oscilloscopes, waveform generator, power supplies, function generators Validation experience in EMI/EMC/ESD Interaction with cross functional teams (PCB, Software, Mechanical)

We are hiring UPS & Battery Maintenance Engineers for client-site service roles. Responsibilities include installation, preventive maintenance, and troubleshooting of UPS systems and batteries. Candidates must be willing to travel and handle emergency service calls. Prior experience in power backup systems is preferred.Candidates must have their own vehicle; service and fuel charges will be reimbursed. Stay will be provided in Raipur for selected out-of-state candidates.