Mechanical Maintenance Engineer Jobs in India

WE ARE HIRING FOR DIPOMA AND B.TECH MECHANICAL ENGINEER WITH BASIC KNOWLEDGE OF SHEET METAL DESIGN AND FABRICATION PROCESSES. RESPONSIBILITY : MANPOWER HANDLING,MANPOWER PLANNING,STAFF DEVELOPMENT,MATERIAL MANAGEMENT.INDUSTRY : MANUFACTURING / PRODUCTION / QUALITY .POSITION : PRODUCTION SUPERVISOREXPERIENCE ; 0 - 2 YEARS ANY INDUSTRY.SALARY : INR 12000 - 25000 PER MONTH.LOCATIONS OF JOB : HOWRAH DHULAGARH.QUALIFICATION : MINIMUM DIPLOMA / B.TECH GENDER : MALECOMPANY NAME ; JINDAL STEEL LIMITEDABOUT COMPANY ; STEEL PLANT.DAY SHIFT AND FULL-TIME JOB.BENEFITS : 1. ACCOMMODATION FREE.2.FOOD PROVIDED.3.PROVIDENT FUND.WORK LOCATION : IN PERSON.CONTACT PERSON : HR SOUMITA ( 7596820038)

An Aircraft Maintenance Technician is responsible for inspecting, maintaining, troubleshooting, repairing, and servicing aircraft systems and components to ensure aircraft airworthiness, safety, and compliance with aviation regulations. The technician performs scheduled and unscheduled maintenance activities on aircraft structures, engines, avionics, hydraulic systems, and other critical equipment.Key ResponsibilitiesAircraft Inspection & MaintenancePerform routine, preventive, and scheduled maintenance on aircraft.Conduct pre-flight, transit, daily, weekly, and periodic inspections.Inspect aircraft structures, engines, landing gear, and mechanical systems.Ensure aircraft meet safety and airworthiness standards.Identify defects, wear, corrosion, or damage.Troubleshooting & RepairsDiagnose mechanical, electrical, hydraulic, and pneumatic faults.Repair or replace defective aircraft components.Troubleshoot aircraft systems using technical manuals and diagnostic equipment.Perform corrective maintenance and emergency repairs.Aircraft Systems MaintenanceMaintain aircraft engines and propulsion systems.Service hydraulic, fuel, pneumatic, and environmental control systems.Inspect and maintain landing gear and braking systems.Assist in avionics and electrical system maintenance.Perform lubrication and component servicing.Documentation & ComplianceRecord maintenance activities accurately in maintenance logs.Complete work orders, inspection reports, and service records.Ensure compliance with DGCA, FAA, EASA, and airline maintenance standards.Follow aircraft maintenance manuals and engineering procedures.Safety & Quality AssuranceFollow aviation safety regulations and company SOPs.Maintain a clean and organized work environment.Use Personal Protective Equipment (PPE) appropriately.Participate in safety audits and quality inspections.Report safety hazards and maintenance irregularities.Ground Support OperationsOperate aircraft servicing equipment and tools.Assist in aircraft towing and hangar operations.Coordinate with engineers, technicians, and flight operations staff.Support aircraft turnaround activities when required.Required SkillsAircraft maintenance and inspection knowledge.Mechanical and electrical troubleshooting skills.Knowledge of aircraft systems and components.Ability to read technical manuals and engineering drawings.Familiarity with aviation regulations and safety procedures.Problem-solving and analytical skills.Teamwork and communication abilities.Attention to detail and accuracy.Computer literacy and maintenance software knowledge.Educational QualificationsEssentialDiploma or Degree in Aircraft Maintenance Engineering, Aeronautical Engineering, Mechanical Engineering, or related field.PreferredDGCA-approved AME course.Aircraft Type Training Certification.Aviation maintenance certifications.Experience RequirementsFresherBasic knowledge of aircraft maintenance procedures.Practical training or apprenticeship experience preferred.Experienced1-5+ years of aircraft maintenance experience.Experience on commercial, cargo, or private aircraft.Knowledge of aircraft maintenance documentation systems.Working ConditionsAirport, hangar, workshop, and maintenance facilities.Rotational shifts including nights, weekends, and holidays.Exposure to aircraft noise and outdoor weather conditions.Physical work involving lifting, climbing, and working in confined spaces.Salary Range (India)Fresher: 25,000 - 30,000 per month1-3 Years Experience: 30,000 - 50,000 per month3-5 Years Experience: 50,000 - 80,000 per monthLicensed/Highly Skilled Technicians: 80,000+ per month

We are seeking a dedicated Mechanical Engineer to join our team in Pune, India. The ideal candidate will have 2 to 4 years of relevant experience and a diploma in mechanical engineering. This full-time role requires a male candidate who is willing to work from the office. Key Responsibilities:1. Design and Development: Create and refine mechanical designs for various projects, ensuring they meet industry standards and client specifications.2. Prototyping: Build and test prototypes to evaluate their functionality and performance, making necessary adjustments based on test results.3. Problem Solving: Identify mechanical issues and develop effective solutions to enhance product performance and reliability.4. Collaboration: Work closely with cross-functional teams, including electrical engineers and production staff, to ensure seamless integration of mechanical systems.5. Documentation: Maintain accurate records of design processes, technical specifications, and project timelines to ensure transparency and accountability.Required Skills and Expectations:Candidates must possess strong analytical and problem-solving abilities, demonstrating a solid understanding of mechanical systems and designs. Proficiency in CAD software is essential for creating detailed technical drawings. Good communication and teamwork skills are necessary to work effectively with other departments. Candidates should be detail-oriented, ensuring high-quality work, and should be able to adapt to changing project requirements. A proactive attitude towards learning and improvement is also expected.

ROLE OVERVIEWThe Mechanical Maintenance Engineer will be responsible for the upkeep, preventive maintenance, and breakdown resolution of all mechanical equipment across the CCL manufacturing plant. This is a hands-on role requiring strong technical grounding and a proactive maintenance mindset.KEY RESPONSIBILITIESEquipment Maintenance- Carry out preventive and predictive maintenance on hydraulic presses, rollers, conveyors, and press plates- Diagnose and resolve mechanical breakdowns to minimise production downtime- Maintain and overhaul roller assemblies, bearings, chains, drives, and structural components- Monitor press plate flatness and surface condition; coordinate re-grinding or replacement as requiredMaintenance Systems- Develop and maintain a Preventive Maintenance (PM) schedule and ensure 100% compliance- Maintain maintenance records, breakdown reports, spare parts inventory, and equipment history cards- Identify opportunities to improve equipment reliability, efficiency, and life cycleCoordination- Work closely with production supervisors for planned maintenance windows and shutdown coordination- Liaise with external vendors and OEMs for equipment servicing, AMCs, and spare parts- Coordinate with instrumentation and electrical teams for integrated fault resolutionCANDIDATE PROFILEExperience- 3-8 years in mechanical maintenance in a manufacturing environment- Experience in CCL, PCB, laminates, rubber, or heavy engineering preferred- Hands-on experience with rollers, conveyors, presses, and hydraulic systemsTechnical Skills- Proficiency with hydraulic systems: pumps, cylinders, valves, seals- Knowledge of conveyor systems: belts, chains, gearboxes, tensioning systems- Familiarity with press plate handling and precision mechanical alignments- Ability to read and interpret mechanical drawings and P&IDsEducation- Diploma / B.E. / B.Tech in Mechanical EngineeringREPORTING & LOCATIONReports To Plant Head / Maintenance ManagerLocation Plant Site, India

Urgent OpeningMaintenance ExecutivePharmaceutical CompanyPalghar East PalgharSalary: Rs. 2 LPA to 5 LPAExperience: 2 Years to 8 YearsImmediate Joining shall be preferredEducation: Diploma in Mechanical/Electrical Engineering

We are looking for a Fabrication Engineer with 5 to 7 years of experience to join our team in Jhajjar. The ideal candidate will have a strong background in fabrication processes and technologies, along with a relevant educational qualification such as a Post Graduate Diploma, M.C.H., or M.Tech. The position is full-time and requires on-site presence in the office.**Key Responsibilities:**- **Design and Development**: Create and improve fabrication designs to enhance product efficiency and quality.- **Process Optimization**: Analyze existing fabrication processes and recommend improvements to minimize waste and reduce costs.- **Material Selection**: Identify and select appropriate materials for projects to ensure durability and performance.- **Quality Control**: Implement and oversee quality control procedures during the fabrication process to meet industry standards.- **Project Coordination**: Work closely with project managers and other engineers to ensure fabrication aligns with project timelines and specifications.- **Troubleshooting**: Identify and resolve technical issues that arise during the fabrication process to ensure smooth operations.- **Documentation**: Maintain accurate records of fabrication processes, materials used, and any modifications made during projects.The successful candidate will possess strong analytical skills, attention to detail, and the ability to work collaboratively in a team. Strong communication skills are essential for effectively communicating ideas and project requirements. Practical knowledge of CAD software and fabrication technologies will be crucial in this role. The candidate should also be able to manage multiple projects efficiently while adhering to deadlines.

K9HR SOLUTIONS, komal thakrar (HR Recruiter) - Mo. No. 90999 70515 Email ID: hr004.k9hr@gmail.com) is looking for Mechanical Mantenance engineer location is khambha education in mechanical job time is 9 to 6

We are looking for a dedicated Service Engineer to join our team in Guwahati. The ideal candidate should have 1 to 3 years of experience and possess a B.E or an Advanced/Higher Diploma. **Key Responsibilities:**- **Installation of Equipment**: You will be responsible for the proper installation of machinery and equipment, ensuring they are set up according to specifications and industry standards.- **Maintenance and Repairs**: Your role includes routine maintenance and timely repairs of equipment to prevent malfunction, thereby ensuring smooth operations.- **Technical Support**: Providing assistance to clients and customers regarding technical issues will be essential. This includes troubleshooting and offering effective solutions to their problems.- **Customer Training**: You will be required to train customers on how to operate and maintain equipment properly, ensuring they get the most out of their investment.- **Documentation and Reporting**: Keeping accurate records of service and maintenance activities is crucial for tracking performance and ensuring compliance.**Required Skills and Expectations:**The ideal candidate should have strong technical knowledge of equipment and machinery. Excellent problem-solving skills and the ability to diagnose issues effectively are essential. Strong communication skills are important for interaction with clients and team members. You should be able to work independently and have a proactive approach to your responsibilities. A valid driving license may be needed for travel to client locations. This position is full-time and will require working from the office.

We are seeking a Mechanical Engineer to join our team in Hyderabad. This full-time position is perfect for recent graduates who are eager to begin their careers in engineering. The role is specifically open to female candidates.Key Responsibilities:1. **Design and Development**: Assist in the design and development of mechanical systems and components. You will use engineering software to create prototypes and make improvements to existing designs.2. **Analysis and Testing**: Conduct tests on prototypes and existing products. You will analyze results to ensure that designs meet performance and safety standards.3. **Documentation**: Prepare and maintain technical documentation. This includes creating reports and specifications to ensure clear communication of design details and project status.4. **Collaboration**: Work closely with other engineers and team members. You will collaborate to integrate mechanical systems with electrical and software components, ensuring a cohesive final product.

As an Aircraft Maintenance Engineer in Kolkata, you will play a crucial role in ensuring the safety and efficiency of aircraft through regular maintenance and repairs. You will be working full-time from the office and collaborating with other team members to maintain high safety standards in aviation.**Key Responsibilities:**- **Perform Regular Inspections:** Conduct thorough checks on aircraft to identify any signs of wear or malfunction, ensuring they meet safety regulations.- **Carry Out Repairs:** Address mechanical and electrical issues found during inspections, using specialized tools and equipment to fix problems effectively.- **Maintain Documentation:** Keep detailed records of all maintenance and repair work done on each aircraft, ensuring compliance with aviation regulations.- **Test Aircraft Systems:** After repairs, run tests on various systems to verify that the aircraft is fully operational and safe for flight.- **Work Collaboratively:** Collaborate with pilots and other engineers to understand maintenance needs and schedule repairs efficiently.**Required Skills and Expectations:**- A strong understanding of aviation safety regulations and maintenance standards is crucial for this role.- Good problem-solving skills are required to diagnose issues accurately and develop effective solutions.- Strong attention to detail is essential to ensure that all maintenance work is completed to a high standard.- Effective communication skills will help you work well within a team and report issues clearly.- A commitment to continuous learning is important, as you will need to stay updated on new technologies and maintenance practices in the aviation industry.

We are looking for a dedicated Mechanical Engineer to join our team in Ballabhgarh. This full-time position requires a motivated individual with at least one year of experience and a diploma in mechanical engineering.**Key Responsibilities:**- **Design and Develop Mechanical Systems:** Create and improve mechanical products and systems based on design specifications and requirements, ensuring they meet industry standards.- **Conduct Testing and Analysis:** Perform tests on prototypes and existing products to evaluate their performance, reliability, and safety, and analyze the results for improvements.- **Collaborate with Cross-Functional Teams:** Work closely with other engineering disciplines, production, and quality assurance teams to ensure projects are completed efficiently and effectively.- **Prepare Technical Documentation:** Write clear and detailed reports, technical manuals, and documentation related to the design, development, and testing processes.- **Troubleshoot Mechanical Issues:** Identify and resolve mechanical problems in equipment or processes to enhance functionality and efficiency.Required skills and expectations for this role include:- A diploma in mechanical engineering with at least one year of relevant experience in the field.- Strong knowledge of mechanical principles and design software such as CAD programs.- Ability to analyze data, solve problems, and think critically.- Good communication skills to effectively collaborate with a team.- An understanding of industry standards and safety regulations.

We are looking for an Aircraft Maintenance Engineer to ensure the safe and efficient operation of aircraft. The position is based in Kannur, and we invite candidates with 0 to 6 years of experience, including fresh graduates who have completed their 12th grade.**Key Responsibilities:**- **Perform Routine Inspections:** Conduct regular checks on aircraft systems and components to identify and rectify any issues before they affect flight safety.- **Carry Out Repairs and Maintenance:** Fix mechanical and electronic issues in aircraft, ensuring all repairs adhere to safety guidelines and regulatory standards.- **Document Maintenance Activities:** Keep clear records of all maintenance work, inspections, and repairs conducted on the aircraft for compliance and future reference.- **Collaborate with Team Members:** Work closely with a team of engineers and technicians to ensure all aircraft are maintained efficiently and safely.- **Stay Updated on Procedures:** Regularly review and understand aviation regulations and maintenance standards to ensure compliance during inspections and repairs.**Required Skills and Expectations:**Candidates should have a strong attention to detail to identify potential safety issues. Good problem-solving skills are essential to troubleshoot and resolve maintenance challenges. Strong teamwork and communication abilities are expected, as collaboration with colleagues is key in this role. Basic computer skills are important for maintaining records and utilizing maintenance software. A proactive approach to learning and staying updated on the latest technology and processes in aviation maintenance is also highly valued.

Hiring for 38 Jobs in Aircraft Maintenance at Aviation Industry Jobs in Kurnool, Visakhapatnam, Itanagar, Patna, Vadodara, Belagavi, Kochi/Cochin, Mumbai, Bhubaneswar, Jaipur, for Freshers,Required Educational Qualification is : Secondary School, I.T.I., B.Arch, B.C.A, B.E, B.Tech, Other Bachelor Degree, Post Graduate Diploma, M.Tech, Any Master Degree with Good knowledge in Aircraft Maintenance, Aircraft Servicing, Aircraft Engineer, Aircraft Mechanic, Aircraft Technician, Aircraft Supervisor, Aircraft Maintenance Engineer, Aircraft Maintenance Technician, Electrical Engineer, Mechanical Engineer, Civil Engineer, Aeronautical Engineer etc.

OverviewThe Aircraft Maintenance Department is responsible for ensuring the airworthiness, safety, and operational reliability of an airlines fleet. The department performs routine maintenance, inspections, troubleshooting, and repairs on aircraft systems and components in compliance with aviation regulations and manufacturer guidelines. The team ensures that aircraft are maintained to the highest safety and operational standards, supporting on-time flight operations.Key Responsibilities Maintenance & RepairsPerform scheduled (line and base) maintenance, inspections, and preventive checks.Troubleshoot mechanical, hydraulic, pneumatic, and avionics systems.Repair or replace defective aircraft components in accordance with manufacturer manuals.Conduct engine checks, landing gear maintenance, and structural inspections.Maintain aircraft interiors, including seating, cabin systems, and emergency equipment. Documentation & ComplianceMaintain detailed records of maintenance activities, defects, and repairs.Ensure compliance with aviation regulations (DGCA, FAA, EASA, etc.) and airline SOPs.Prepare reports for regulatory audits and inspections.Ensure proper documentation of part replacements and maintenance logs. Safety & Quality AssuranceMonitor aircraft systems for potential issues and perform proactive maintenance.Ensure adherence to all safety, health, and environmental regulations.Participate in safety audits, inspections, and risk assessments.Report hazards, non-conformances, or technical issues promptly. Team CoordinationCoordinate with flight operations, ground staff, and technical control teams.Assist engineers and technicians during troubleshooting or major repairs.Support training and mentoring of junior maintenance staff. Technical & Operational SupportPerform software updates and troubleshooting for avionics and onboard systems.Test aircraft systems to verify proper functioning after maintenance.Recommend improvements in maintenance procedures and processes.Manage spare parts inventory, tools, and equipment for maintenance operations.Skills & CompetenciesTechnical Skills:Strong knowledge of aircraft systems (avionics, engines, hydraulics, pneumatics)Proficiency in maintenance software and diagnostic toolsAbility to read and interpret technical manuals, blueprints, and schematicsKnowledge of aviation safety standards and regulatory requirementsSoft Skills:Problem-solving and analytical thinkingAttention to detail and high level of accuracyTeamwork and effective communicationAbility to work under pressure and meet tight deadlinesPersonal Attributes:Commitment to safety and qualityReliability, discipline, and professionalismAdaptability to shift work and emergency maintenance situationsEducational QualificationsDiploma or Bachelors degree in Aeronautical Engineering, Mechanical Engineering, or Aircraft Maintenance Engineering (AME)Certifications in Aircraft Maintenance and Repair (DGCA-approved AME license for India, FAA/EASA certifications for international roles)ExperienceEntry Level: Freshers with relevant educational background and training may apply.Experienced: 06 years of experience in aircraft maintenance, line/base maintenance, or technical operations preferred.Work EnvironmentHangars, maintenance bays, and airport operational areasExposure to aircraft engines, hydraulics, and avionics systemsShift-based schedules, including nights, weekends, and emergency call-outsAdherence to strict safety protocols and PPE requirements

Installs and service/repairs Medical Imaging equipment. Consults with customer orsupervisor to plan layout of equipment during each new installation. Studies blueprints, schematics, manuals, and other specifications to determine installationprocedures. Able to interpret schematics and wiring diagrams to repair equipment. Hands-on technicalskills and using standard test instruments and hand tools. Installs or oversees installation of equipment according to manufacturer's specifications. Provide basic user training for equipment installed. Advice management regarding customer satisfaction, product performance, suggestions forproduct improvements

1. Design and develop mechanical systems, equipment, and machinery required for refinery operations, including pumps, compressors, heat exchangers, pressure vessels, and boilers.2. Develop and implement preventive maintenance programs for critical mechanical equipment, including pumps, valves, and rotating machinery.3. Diagnose and troubleshoot mechanical failures or malfunctions, leading to effective corrective actions to minimize downtime.4. Conduct regular performance evaluations and assessments of mechanical systems to identify areas for improvement, increase efficiency, and reduce energy consumption.5. Oversee the installation, commissioning, and startup of new mechanical systems, ensuring compliance with project timelines, cost estimates, and quality standards.6. Conduct regular safety audits and inspections to verify that all mechanical systems meet safety standards and do not pose a risk to personnel or the environment.7. Perform condition monitoring and vibration analysis on rotating equipment to predict failure and improve reliability.8. Maintain accurate and up-to-date maintenance logs and operation manuals for mechanical systems and equipment.9. Evaluate and select vendors and suppliers for mechanical equipment, ensuring they meet quality, cost, and delivery requirements.10. Coordinate with vendors for equipment procurement, installation, and commissioning.11. Provide technical support and guidance to the operations team during the start-up, shutdown, and day-to-day running of mechanical systems.12. Lead lean manufacturing and continuous improvement initiatives to enhance the performance of mechanical systems and reduce operational costs.13. Prepare and manage budgets for mechanical engineering projects and maintenance activities, ensuring cost-effective solutions are implemented.

1. Plan and schedule preventive and corrective maintenance activities for machinery, equipment, and utilities.2. Ensure that maintenance activities are conducted in a timely manner to minimize downtime and prevent production disruptions.3. Develop and maintain a comprehensive maintenance calendar, coordinating with production and other departments to avoid conflicts.4. Oversee the regular maintenance of production equipment, HVAC systems, boilers, and other critical machinery.5. Perform troubleshooting, repair, and maintenance of equipment to ensure optimal performance.6. Ensure all machines, tools, and instruments are operating within their recommended specifications.7. Ensure that breakdowns are reported, analyzed, and corrective actions are taken promptly.8. Ensure that maintenance practices comply with relevant pharmaceutical industry standards, such as cGMP (current Good Manufacturing Practices), FDA regulations, and safety protocols.9. Maintain records of all maintenance activities and audits in compliance with regulatory requirements.10. Assist in facility audits and inspections related to maintenance and safety compliance.11. Maintain an inventory of spare parts and tools required for maintenance tasks.12. Ensure timely procurement and proper storage of spare parts to prevent delays in maintenance operations.13. Track and monitor the usage of consumables and equipment parts.14. Supervise and manage a team of maintenance technicians, ensuring efficient and effective execution of tasks.15. Coordinate with internal teams (production, quality, engineering, etc.) to ensure maintenance does not disrupt production schedules.16. Provide training and guidance to the maintenance team on best practices, safety, and operational procedures.17. Maintain detailed records of all maintenance activities, including repairs, replacements, and inspections.18. Document maintenance schedules, parts used, and machine downtime for performance analysis.

We are looking for a motivated and talented female Mechanical Engineer to join our team in Chennai. This role is ideal for fresh graduates eager to apply their knowledge and skills in a dynamic work-from-home environment.Key Responsibilities: - Design and Analysis: Create and analyze mechanical components and systems using CAD software to ensure they meet industry standards and project specifications. - Project Support: Assist in various projects by providing technical support and collaborating with other team members to solve engineering challenges. - Documentation: Prepare detailed documentation of designs and processes, ensuring clear communication of project requirements and updates. - Research and Development: Engage in research to support innovative engineering solutions and stay updated with the latest technologies in the field.Required Skills and Expectations: Candidates should have a degree in mechanical engineering or a related field. Strong proficiency in CAD software is essential, along with a good understanding of engineering principles and materials. We expect excellent communication skills, a proactive mindset, and the ability to work independently while managing time effectively. Attention to detail and a passion for problem-solving will contribute to success in this role. As a fresh graduate, eagerness to learn and adapt in a fast-paced environment is highly valued.

The Mechanical Engineer will be responsible for designing, developing, and testing mechanical components and systems. They will create technical drawings, analyze designs for efficiency, and troubleshoot any issues that arise during the manufacturing process. The ideal candidate should have a graduate degree in Mechanical Engineering and 0-4 years of experience. Proficiency in 3D modeling software and strong problem-solving skills are required. The role is based in Raipur, Chhattisgarh, India and is open to male candidates only.

We are seeking a male Civil Site Engineer with 0-4 years of experience to join our team in Ahmedabad, India. The successful candidate will be responsible for overseeing civil construction projects from start to finish, ensuring that they meet quality standards, safety regulations, and project timelines.Key Responsibilities:1. Supervise construction activities on-site to ensure compliance with design specifications and safety standards.2. Coordinate with architects, contractors, and subcontractors to ensure proper execution of the project.3. Prepare and review project schedules, budgets, and progress reports.4. Inspect construction sites regularly to identify potential issues and propose solutions.5. Manage project documentation and ensure all necessary permits and approvals are in place.Required Skills and Expectations:- Graduate in Civil Engineering or related field.- Strong knowledge of construction practices, materials, and methods.- Proficiency in AutoCAD, MS Office, and project management software.- Excellent communication and interpersonal skills.- Ability to work independently and as part of a team.- Willingness to work from the office and travel to project sites as needed.

As a Mechanical Engineer, you will be responsible for designing, testing, and implementing mechanical systems and processes. Your key responsibilities will include conducting research, analyzing data, developing prototypes, and collaborating with cross-functional teams to ensure the efficiency and reliability of mechanical systems. You will be expected to possess strong technical skills in areas such as thermodynamics, fluid mechanics, and materials science. Proficiency in CAD software and experience in designing mechanical components will be essential. Additionally, you should have excellent problem-solving abilities, attention to detail, and the ability to work well under pressure. Effective communication skills and the ability to work collaboratively with a team are also important in this role.The ideal candidate will have 1-4 years of experience in a similar role and possess at least a 12th Pass education. This position is open to male candidates and requires full-time availability for work from the office in Gurgaon, India.

We are looking for a dedicated Aircraft Maintenance Technician to join our team in Visakhapatnam. In this role, you will be responsible for ensuring the safety and functionality of aircraft. This is a full-time position suitable for candidates with 0 to 6 years of experience and a minimum education of 12th pass.**Key Responsibilities:**- **Conduct Inspections:** Regularly check aircraft systems, engines, and components to ensure they meet safety standards and regulations.- **Perform Repairs:** Identify and fix mechanical issues, replacing defective parts to maintain optimal performance.- **Maintain Records:** Document all maintenance activities accurately to comply with regulatory standards and help with future inspections.- **Collaborate with Team:** Work closely with other technicians and engineers to assess aircraft performance and establish maintenance schedules.- **Follow Safety Protocols:** Adhere to safety guidelines to prevent accidents and ensure a safe working environment for all personnel.**Required Skills and Expectations:**- Candidates must have at least a 12th-grade education; technical courses related to aircraft maintenance are a plus.- Strong mechanical aptitude is essential, along with problem-solving skills to address maintenance challenges effectively.- Attention to detail is crucial for inspecting aircraft and keeping accurate records.- Good communication skills are needed for teamwork and reporting directly to supervisors.- A commitment to safety and adherence to aviation regulations is expected at all times. This position offers a unique opportunity to develop your skills in the aviation industry while contributing to the safety and reliability of aircraft operations.

Aircraft Maintenance professionals are responsible for inspecting, repairing, and maintaining aircraft systems to ensure safety, airworthiness, and compliance with aviation regulations. They work on airframes, engines, electrical systems, and avionics. Key Responsibilities1. Inspection & MaintenanceConduct routine inspections before and after flightsPerform scheduled maintenance (A-check, B-check, C-check, D-check)Diagnose mechanical and technical faults2. Repair & TroubleshootingRepair or replace defective aircraft componentsTroubleshoot engine, hydraulic, and electrical issuesUse diagnostic tools and maintenance manuals3. Testing & Quality ControlTest aircraft systems after maintenanceEnsure all systems meet safety standardsPerform functional and operational checks4. DocumentationMaintain accurate maintenance logs and recordsEnsure compliance with aviation authoritiesReport defects and corrective actions5. Safety ComplianceFollow strict aviation safety regulationsUse proper tools and protective equipmentEnsure aircraft meets airworthiness standards Types of Aircraft MaintenanceLine Maintenance - Routine checks at airportsBase Maintenance - Major repairs in hangarsPreventive Maintenance - Scheduled servicingCorrective Maintenance - Fixing faults/issues Education & QualificationsDiploma/Degree in Aircraft Maintenance Engineering or Aerospace EngineeringCertification from aviation authorities like:DGCA IndiaFAAEASAAME License (mandatory for certifying engineers) Required SkillsStrong technical and mechanical knowledgeAttention to detailProblem-solving abilityKnowledge of aircraft systems and toolsAbility to work under pressureGood communication and teamwork Tools & Equipment UsedDiagnostic testing equipmentHand and power toolsAircraft maintenance softwareTechnical manuals and blueprints Working ConditionsShift-based work (including nights and weekends)Work in hangars, airports, or outdoor environmentsPhysically demanding (lifting, climbing, bending)Exposure to noise and chemicals Career OpportunitiesAircraft Maintenance TechnicianLicensed Aircraft Maintenance EngineerQuality InspectorMaintenance SupervisorMRO SpecialistTop aviation employers include airlines, defense organizations, and companies like Air India, IndiGo, and SpiceJet. Salary (India Approx.)Fresher: 2.5 - 4 LPAExperienced: 5 - 12+ LPALicensed AME: 10 - 25+ LPA

Aircraft Maintenance professionals are responsible for inspecting, repairing, and maintaining aircraft systems to ensure safety, airworthiness, and compliance with aviation regulations. They work on airframes, engines, electrical systems, and avionics. Key Responsibilities1. Inspection & MaintenanceConduct routine inspections before and after flightsPerform scheduled maintenance (A-check, B-check, C-check, D-check)Diagnose mechanical and technical faults2. Repair & TroubleshootingRepair or replace defective aircraft componentsTroubleshoot engine, hydraulic, and electrical issuesUse diagnostic tools and maintenance manuals3. Testing & Quality ControlTest aircraft systems after maintenanceEnsure all systems meet safety standardsPerform functional and operational checks4. DocumentationMaintain accurate maintenance logs and recordsEnsure compliance with aviation authoritiesReport defects and corrective actions5. Safety ComplianceFollow strict aviation safety regulationsUse proper tools and protective equipmentEnsure aircraft meets airworthiness standards Types of Aircraft MaintenanceLine Maintenance - Routine checks at airportsBase Maintenance - Major repairs in hangarsPreventive Maintenance - Scheduled servicingCorrective Maintenance - Fixing faults/issues Education & QualificationsDiploma/Degree in Aircraft Maintenance Engineering or Aerospace EngineeringCertification from aviation authorities like:DGCA IndiaFAAEASAAME License (mandatory for certifying engineers) Required SkillsStrong technical and mechanical knowledgeAttention to detailProblem-solving abilityKnowledge of aircraft systems and toolsAbility to work under pressureGood communication and teamwork Tools & Equipment UsedDiagnostic testing equipmentHand and power toolsAircraft maintenance softwareTechnical manuals and blueprints Working ConditionsShift-based work (including nights and weekends)Work in hangars, airports, or outdoor environmentsPhysically demanding (lifting, climbing, bending)Exposure to noise and chemicals Career OpportunitiesAircraft Maintenance TechnicianLicensed Aircraft Maintenance EngineerQuality InspectorMaintenance SupervisorMRO SpecialistTop aviation employers include airlines, defense organizations, and companies like Air India, IndiGo, and SpiceJet. Salary (India Approx.)Fresher: 2.5 - 4 LPAExperienced: 5 - 12+ LPALicensed AME: 10 - 25+ LPA

Urgent Requirement: Textile Machines Maintenance EngineerJob Location: Boisar (Palghar)The Company need immediate Joining,Should have experience in the Sewing machineThe candidate should be from the textile industryPlant Operations, Utility incharge* Electrical Panel, Motor & Pumps* UPS, DG set, Air Compressor, Transformer HT/LT, Grounding & lighting system* responsible for preventive & shut down maintenance* RO, STP & Water System* TroubleshootingRequired Candidate profile* Must have 7-10 years of Experience* B.Tech/ Diploma/ITI Electrical* willing to work in shifts* Hands-on experience in maintenance* Documentation

URGENT OPENINGSMaintenance EngineerIn a Pharmaceutical CompanyPalghar East ITI or Diploma or Degree in Mechanical Engineering Experience: 1 to 3 Years

Maintenance Head/Assistant ManagerOverall In charge/Head of MaintenanceIncluding Electrical, Mechanical and all activities required related to the MaintenanceITI /Diploma in Mechanical & Electrical EngineeringIf required Company can provide Accommodation also(Pharmaceutical formulations like tablets, capsules, liquids, ointments, etc.)Pharmaceutical CompanyJob Location: WADAHamrapur, Manor Wada Road, Tal. Wada, Dist. Palghar- Maharashtra Required Experience: 2 to 4 Years Qualification: ITI Electrical/Mechanical Office Timing: 9:30 AM to 6:00 PM Routinely inspecting electrical systems such as wiring, fixtures, and appliances. Electrical Problem Troubleshooting work. Responsible for Preventive Maintenance Activity. Responsible for the Break down Activity work. Responsible for D.G. Operation Work. Responsible for D.G. Servicing work. Responsible for Maintaining DG Record Responsible for AHU Operation work. Responsible for Filter cleaning and maintaining its record. Responsible for plant Electrical Work. Responsible for internal internet system. Responsible for the plant EPBX system smooth operation. Responsible for internal Project Electrical work. Responsible for New Equipment Installation work. Responsible for maintaining the document as per WHO guidelines. Receive on-the-job training in the operation and maintenance of various units of equipment & process control procedures. Provide manual assistance to Division employees when required. Perform related work as assigned. Performs duties and safely operates equipment.