Embedded Jobs in

JD Embedded Software EngineerJob SummaryWe are looking for an Embedded Software Engineer with 2-4 years of hands-on experience indesigning, developing, and debugging embedded systems. The ideal candidate should havestrong knowledge of embedded C/C++, microcontrollers, and real-time systems, and becomfortable working close to hardware.Experience Required - 2 to 4 YearsSalary - 25K to 50KKey Responsibilities Design, develop, and maintain embedded firmware for microcontroller-based systems Write efficient, reliable code in Embedded C / C++ Work with microcontrollers (ARM, STM32, ESP32, NXP, Microchip, etc.) Interface with hardware peripherals (GPIO, UART, SPI, I2C, CAN) Develop and debug bare-metal or RTOS-based applications Perform board bring-up, debugging, and validation Analyze requirements and translate them into technical solutions Optimize code for performance, memory, and power Collaborate with hardware, PCB, and QA teams Maintain technical documentation and follow coding standardsRequired Skills Strong experience in Embedded C / C++ Hands-on experience with microcontrollers & development boards Knowledge of RTOS concepts (tasks, queues, semaphores, timers) Experience with communication protocols (UART, SPI, I2C, CAN) Familiarity with debugging tools (JTAG, SWD, logic analyzer) Understanding of memory management, interrupts, and boot process Experience using version control (Git) Good to Have Experience with Embedded Linux Basic knowledge of device drivers Exposure to Python for scripting or testing Experience with IoT protocols (MQTT, HTTP) Familiarity with low-power design techniques Understanding of EMI/EMC basicsQualifications Bachelors degree in Electronics / Computer Engineering/IT

Job SummaryThe Avionics Engineer is responsible for the design, development, testing, installation, and maintenance of aircraft electronic systems. This role ensures safe, efficient, and compliant operation of avionics equipment including communication, navigation, surveillance, and flight control systems. The engineer works closely with cross-functional teams to support system integration, troubleshooting, upgrades, and continuous improvement in aviation technology. Key ResponsibilitiesDesign & Development:Design, develop, and integrate avionics systems for aircraft and aerospace applications.Create system schematics, wiring diagrams, and interface control documents.Develop embedded software or hardware for avionics components.Testing & Troubleshooting:Conduct system testing, validation, calibration, and verification to ensure performance standards.Diagnose issues in avionics equipment using testing tools and propose corrective actions.Perform root cause analysis for system failures and implement preventive measures.Installation & Integration:Oversee installation and configuration of avionics systems in aircraft.Ensure seamless integration of avionics with electrical, mechanical, and flight control systems.Coordinate with manufacturing, maintenance, and flight operations teams for system implementation.Compliance & Documentation:Ensure compliance with aviation authorities (FAA, EASA, DGCA) and safety standards.Prepare technical reports, maintenance manuals, and certification documentation.Maintain accurate documentation of design changes, test results, and system configuration.Maintenance & Support:Support maintenance teams in periodic inspections, upgrades, repairs, and system checks.Provide engineering support for aircraft modifications, retrofits, and new product introductions. Required Skills & CompetenciesTechnical Skills:Strong knowledge of communication, navigation, surveillance, autopilot, and flight control systems.Expertise in embedded systems, digital/analog electronics, and circuit design.Hands-on experience with avionics protocols (e.g., ARINC 429, MIL-STD-1553, CAN bus).Proficiency in tools such as MATLAB/Simulink, LabVIEW, PSPICE, Altium, Xilinx, or similar.Knowledge of aviation standards DO-178C, DO-254, RTCA, FAA/EASA guidelines.Soft Skills:Analytical and problem-solving ability with strong attention to detail.Effective communication, teamwork, documentation, and time-management skills.Ability to work under pressure and meet strict deadlines. Education & Experience RequirementsBachelors degree in Avionics Engineering, Aerospace Engineering, Electronics & Communication, Electrical Engineering, or related field.(Preferred) Masters degree in Avionics or related specialization.Experience:Entry Level: 02 yearsMid-Level: 37 yearsSenior: 8+ years in avionics engineering or related aerospace domain Work EnvironmentMay require working in aircraft hangars, manufacturing facilities, laboratories, or test sites.Willingness to travel for project support, testing, and system installation.Must adhere to aviation safety regulations and workplace safety protocols. Job Type & CompensationFull-time / PermanentCompetitive salary based on experience and qualificationsBenefits: Health insurance, travel allowance, training & professional development

Senior Linux Device Driver Developer (LDD)Location: Bangalore (Work from Office mandatory)Experience: 5-10 yearsRole Type: Permanent/ContractRole OverviewWe are looking for a Senior Linux Device Driver Developer with strong hands-on expertise in Embedded C and Linux kernel development. The ideal candidate brings deep experience in device driver development, Linux porting, and kernel space programming.Key ResponsibilitiesDesign and develop Linux device drivers and handle Linux porting for embedded platformsSet up and maintain Linux kernel environmentsWrite and maintain Linux kernel space codeWork with kernel build environments and common kernel functionsContribute to Linux user space developmentRequired Skills & ExperienceProficiency in Embedded CHands-on experience in Linux porting and device driver developmentHands-on experience setting up Linux kernel environmentsHands-on experience writing Linux kernel space codeStrong understanding of:Kernel build environmentLinux Device Driver developmentCommon kernel functionsExperience in Linux user space developmentOS level knowledge including Autosar, Camera pipeline, QNX bring-up, BSP, driversExperience in L1 triage and bug fixing

Designing, inspecting, testing, and updating electronic systems, components, equipment, and software.Liaising with engineers, other professionals, as well as clients to ensure quality projects are completed to specifications.Ensuring all equipment and products meet health and safety regulations.Observing existing processes and making recommendations for improvement.Developing effective maintenance, testing, and quality control procedures.Showing initiative and keeping up with advancements in Electronics.Representing the company at conferences and delivering presentations if required.

JD Embedded Python EngineerJob SummaryWe are looking for an Embedded Python Engineer with around 2 years of hands-on experiencein developing, testing, and deploying Python-based applications on embedded/Linux systems.The role involves working closely with hardware, firmware, and application teams to buildreliable and efficient embedded solutions.Experience Required - 2 to 4 YearsSalary - 25K to 50KKey Responsibilities Design, develop, and maintain Python applications for embedded systems Work with Linux-based embedded platforms (Raspberry Pi, BeagleBone, custom boards) Interface Python code with hardware peripherals (GPIO, UART, SPI, I2C, USB,LVDS,LCDinterface) Develop scripts for device control, automation, and monitoring Integrate Python applications with sensors, actuators, and external modules Debug and troubleshoot issues across software-hardware boundaries Optimize Python code for performance and memory constraints Collaborate with firmware, hardware, and QA teams for system integration Write technical documentation and maintain code repositories (Git)Required Skills Strong proficiency in Python (2.x/3.x) for embedded or system-level development Experience with Embedded Linux Hands-on knowledge of GPIO, I2C, SPI, UART Familiarity with shell scripting (Bash) Understanding of multithreading / multiprocessing in Python Experience with REST APIs, JSON, and serial communication Debugging tools: logs, traces, basic Linux debugging Version control using Git Good to Have Experience with C/C++ for embedded systems Knowledge of RTOS concepts Exposure to PyQt / Tkinter for embedded GUI applications Experience with audio/video, sensors, or IoT devices Basic knowledge of networking protocols (TCP/IP, MQTT, HTTP)Qualifications Bachelors degree in Computer Science, Electronics, or related field

Must have experience in the Electronics department.Should have knowledge about programming (Embedded) Software .Expertise in Embedded C.Excellent understanding Protocols HART, Modbus, I2C, USART, R232Must have experience in new technology Like Bluetooth, Wi-Fi, GPRS,GPS.Knowledge of specifications, rating, functions and applications according to design of circuit.Knowledge of Schematics designing .R & D activities and cyclic testing.Microcontroller: PIC, AVR.PWM,ADC,UART,I2C,SPI,State Machine, Interrupts, Watch log, Board brings up.